Article

CSP Exam Guide 2026: FREE BCSP Certified Safety Prep

Key Facts

  • The BCSP CSP exam has 200 multiple-choice questions and a 5.5-hour limit at Pearson VUE test centers; roughly 12% are unscored beta questions.
  • BCSP's 2024 Annual Report lists a 67.9% CSP pass rate (2,117 of 3,120 candidates), lower than the ASP's 80.8%.
  • CSP fees in 2026 are a $160 application plus a $350 exam, with a $185 annual renewal fee.
  • CSP eligibility requires a bachelor's degree, four years of SH&E experience at 50% professional safety duties, and a BCSP qualified credential such as the ASP or GSP.
  • Under the CSP11 blueprint, Advanced Application of Safety Principles and Program Management are the largest domains at 25% each.
  • The CSP11 blueprint took effect August 1, 2025, with seven domains; regulations and standards appear under Program Management rather than a separate law domain.
  • The CSP11 Program Management domain names ISO 45001, the ISO 14000 series, ISO 19011, and ANSI Z10 among management and audit systems.
  • OSHA's general-industry noise rule, 1910.95, sets a 90 dBA PEL over an 8-hour TWA with a 5-dB exchange rate and an 85 dBA hearing conservation action level.
  • CSP recertification requires 25 points every 5 years, including 0.5 ethics points, plus a $185 annual renewal fee.
  • OSHA 29 CFR 1904.39 requires reporting workplace fatalities within 8 hours and hospitalizations, amputations, or eye losses within 24 hours.

Checking video availability…

Last updated: October 22, 2026. Fees and test delivery checked on October 21, 2026 against the BCSP Credentials At-A-Glance (V.2026.04.01) and BCSP's Complete Guide to Safety Certification (12th edition, June 2026); eligibility, the qualified-credential list, scheduling, recertification and pass rates rechecked on October 22, 2026 against the Complete Guide, the BCSP CSP and recertification pages and the BCSP 2024 Annual Report. Blueprint references are to the BCSP CSP11 Examination Blueprint (V.2024.04.24), effective August 1, 2025 per BCSP's blueprint-changes notice.

The CSP Exam at a Glance

The Certified Safety Professional (CSP) is the Board of Certified Safety Professionals' (BCSP) flagship senior credential, which BCSP calls the gold standard in safety certification. Where the ASP validates knowledge, the CSP validates applied practice -- a seasoned professional who can design safety programs, make risk-based decisions, and advise executives.

In its 2024 Annual Report, BCSP reported a CSP pass rate of 67.9% (2,117 of 3,120 candidates), lower than the ASP's 80.8%. The exam now runs on the CSP11 blueprint (effective August 1, 2025), which has seven domains; BCSP says most CSP10 concepts carried over, with the science and math principles spread into their content-related domains.

  • Item 2026 Detail
  • Credentialing body Board of Certified Safety Professionals (BCSP)
  • Application fee $160 (non-refundable)
  • Exam fee $350 (single attempt)
  • Annual renewal fee $185 per year
  • Eligibility extension $100 (one-time, 1 year)
  • Testing vendor Pearson VUE test centers (BCSP does not offer online or remote proctoring)
  • Questions 200 multiple-choice; roughly 12% are unscored beta questions, mixed in and not identified
  • Exam time 5.5 hours

Passing score Not published as a fixed number; official pass/fail result as soon as you submit at the test center

  • 2024 pass rate 67.9% (BCSP 2024 Annual Report)
  • Experience required 4 years SH&E, at least 50% preventive, professional-level work with breadth and depth
  • Education required Bachelor's degree or higher (any field) from an accredited institution

Prerequisite credential A BCSP qualified credential: ASP, GSP, TSP, CIH, CMIOSH, CFIOSH, CRSP, or another listed credential

  • Recertification cycle 25 recertification points every 5 years (incl. 0.5 ethics points)
  • Blueprint CSP11 (7 domains, V.2024.04.24, effective August 1, 2025)

Take free CSP practice questions right now. We maintain a growing bank of CSP-focused risk, IH, fire, environmental, and program-management items -- every question AI-explained. Start FREE CSP Practice -->

The ASP -> CSP Path

Many CSP candidates arrive via the ASP (Associate Safety Professional). BCSP requires that you already hold a BCSP qualified credential when you apply for the CSP, and its Complete Guide notes that many people attain the ASP as that prerequisite. The GSP and TSP designations are also built as CSP stepping stones for graduates of qualifying programs.

A frequent and costly misconception: the technician and supervisor credentials (CHST, OHST, STS, STSC) do not satisfy the CSP prerequisite. The credentials BCSP accepts for the CSP application are:

ASP -- Associate Safety Professional (the intended path for degree-holders)

GSP -- Graduate Safety Practitioner (graduates of BCSP Qualified Academic Programs apply for it; it waives the ASP and its exam)

  • TSP -- Transitional Safety Practitioner (holders of a credential from a BCSP Qualified Equivalent Program)
  • CIH -- Certified Industrial Hygienist
  • CMIOSH and CFIOSH -- Chartered Member or Chartered Fellow of IOSH (UK)

Other listed credentials -- the CRSP (Canada), NEBOSH National or International Diploma, the U.S. Army Combat Readiness Center CP-12 certificate, the SAWS Certified Safety Engineer (China), the ITC-ILO Master in OSH, SISO Professional Member (Singapore), and the AICTE Diploma/Certificate in Industrial Safety (India)

Typical sequencing for a new graduate:

Year 0-1: Bachelor's degree + first safety specialist role. Apply for ASP once 1 year of 50%-duty experience is logged.

Year 1-2: Pass ASP. Begin accumulating the additional 3 years of experience needed for the CSP.

Year 3-4: At 4 years of qualifying experience, apply for CSP. Study 16-24 weeks. Sit the exam.

Year 4+: CSP earned. Move into Senior Safety Engineer, EHS Manager, or Corporate EHS Director roles.

The ASP and CSP share a 50% duty threshold, so every qualifying year for the ASP also counts toward the CSP. BCSP lists no waiting period between the ASP and CSP other than experience accrual.

Eligibility Requirements (2026)

BCSP applies three bright-line rules for CSP eligibility in 2026. All three must be satisfied at time of application.

Rule 1: Education

BCSP's Complete Guide states: "All individuals applying for the CSP must have a bachelor's degree or higher in any field from an accredited institution." Associate degrees do NOT qualify for the CSP (unlike the ASP). For U.S. degrees, BCSP requires institutional accreditation recognized by CHEA and/or the U.S. Department of Education, and unaccredited degrees cannot be used. BCSP randomly selects 5% of certification applications for audit.

Rule 2: Experience

Candidates must have at least four years of SH&E experience, at least 50% of which is preventive, professional-level work with breadth and depth of safety duties. BCSP's Complete Guide lists the criteria:

Professional safety must be the primary function of the position; collateral safety duties are not counted.

The position's primary responsibility must be preventing harm rather than responding to harmful events.

Professional safety functions must be at least 50% of the position duties (full-time means at least 35 hours per week; part-time counts if it equals at least 900 hours a year).

The position must be at a professional level and have breadth of professional safety duties.

Administrative or clerical safety roles (e.g., a safety coordinator who only files paperwork) do not meet the professional-level test.

Rule 3: Prerequisite Credential

Candidates must already hold a BCSP qualified credential -- such as the ASP, GSP, TSP, CIH, or CMIOSH , or another credential on BCSP's list -- at the time of application. The technician and supervisor credentials (CHST, OHST, STS, STSC) are not on the list.

The CSP11 Blueprint: Seven Domains (2026)

Under the CSP11 blueprint (V.2024.04.24, effective August 2025) , BCSP tests seven domains. The two largest -- Advanced Application of Safety Principles and Program Management -- carry 25% each, so half the exam sits in those two areas. Verify current weights on bcsp.org before scheduling; BCSP revalidates its exams at least every five years, starting with a job and task analysis.

  • # Domain Weight
  • 1 Advanced Application of Safety Principles 25%
  • 2 Program Management 25%
  • 3 Risk Management 15%
  • 4 Emergency Management 9%
  • 5 Environmental Management 6%
  • 6 Occupational Health and Applied Science 10%
  • 7 Training 10%

Note: CSP11 has no separate law or ethics domain . Regulations and standards appear under Program Management ("Describe required components for plans, systems, and policies (e.g., safety, health, and environmental regulations and standards)"). BCSP says the CSP11 blueprint has a heavier focus on skill-based statements, so expect scenario questions that ask which control, system, or regulatory pathway fits.

Domain 1: Advanced Application of Safety Principles (25%)

The single largest domain. It tests senior-level judgment in designing hazards out and controlling the major loss sources:

Prevention through Design (PtD) -- NIOSH initiative; avoidance, elimination, substitution, and safety design criteria for facilities, machines, and practices

Process safety -- pressure relief systems, chemical compatibility, management of change, materials of construction, process flow diagrams; PSM (29 CFR 1910.119, 14 elements)

Common workplace hazards -- electrical, falls, confined spaces, lockout/tagout, caught-in, struck-by, excavation, working around water

  • Life safety features -- public space safety, floor loading, occupancy loads
  • Fleet safety -- driver and equipment safety, telematics/GPS monitoring, fatigue, fuel systems

Materials handling -- forklifts, aerial lifts and other powered industrial trucks, cranes, rigging, hoists, manual handling, drones

Tools, machines, and equipment -- hand and power tools, ladders, grinders, hydraulics, robotics, machine safeguarding

Hierarchy of controls -- Elimination > Substitution > Engineering > Administrative > PPE, applied to scenarios (recognize when substitution is mislabeled as engineering)

Domain 2: Program Management (25%)

Tied for the largest domain. The CSP is fundamentally about designing, running, and measuring EHS programs:

Management and audit systems -- ISO 45001:2018 (Plan-Do-Check-Act, clauses 4-10), ANSI/ASSP Z10.0, ISO 14000 series, ISO 19011

Performance measurement -- benchmarking, gap analysis, leading vs lagging indicators, EHS culture measurement

Incident investigation -- root-cause techniques and corrective actions; management of change (before, during, after)

Data analysis -- exposure and sampling data, mean/median/mode, confidence intervals, probabilities, Pareto analysis

Finance and projects -- budgeting, ROI, cost/benefit analysis, procurement; project management (RACI charts, timelines)

Leadership -- management and leadership theories, motivation, accountability, communication styles

Records and compliance -- document retention (incident, training, exposure, audit records), privacy/trade secrets, and the safety, health, and environmental regulations and standards that plans, systems, and policies must include (OSHA, EPA, DOT)

  • OSHA programs -- VPP (Star/Merit/Demonstration) and the 2016 Recommended Practices seven core elements
  • Domain 3: Risk Management (15%)

The CSP differentiates itself from the ASP by requiring quantitative, decision-grade risk analysis:

Risk evaluation process -- identifying, analyzing, evaluating, monitoring, and communicating organizational risk

  • Risk mitigation strategies -- job hazard analysis (JHA), process hazard analysis (PHA), hierarchy of controls
  • Financial risk strategies -- risk avoidance, retention, sharing, transfer, loss prevention and reduction
  • FMEA (Failure Modes and Effects Analysis) -- Risk Priority Number = Severity x Occurrence x Detection
  • Fault Tree Analysis (FTA) -- top-down, deductive, Boolean AND/OR gates, minimum cut sets
  • Event Tree Analysis (ETA) -- bottom-up, inductive, probability propagation
  • Bowtie analysis -- preventive plus mitigative barriers around a top event; popular in oil and gas and aviation
  • HAZOP -- guidewords (NO, MORE, LESS, AS WELL AS, REVERSE) applied to process nodes

ALARP -- reduce risk until further reduction is grossly disproportionate; ANSI B11.0/B11.19 machine risk assessment; 3x3, 4x4, 5x5 risk matrices

Expect scenarios that ask which tool fits. FMEA for component reliability. FTA for tracing a defined top event back to its causes. Bowtie for communicating risk to non-technical audiences. HAZOP for new chemical processes.

Domain 4: Emergency Management (9%)

Emergency Response Plans -- fire, severe weather, natural disasters, nuclear incidents, terrorist attacks, chemical spills, utility-system and cyber-security incidents

Disaster response and recovery -- Incident Command System (FEMA NIMS), business continuity, contingency plans

Fire prevention, protection, and suppression -- NFPA 101 Life Safety Code (egress, travel distance, occupancy loads), NFPA 72 alarm/signaling, portable extinguisher travel distances (OSHA 1910.157(d): Class A 75 ft, Class B 50 ft, Class D 75 ft)

Emergency and Fire Prevention Plans -- 29 CFR 1910.38 and 1910.39 required elements, alarm systems, evacuation and accountability, fuel-source controls

Hazardous materials transport and security -- safe transportation procedures and security of hazardous materials

Workplace violence prevention -- program design, threat assessment, and CPTED (Crime Prevention Through Environmental Design)

Domain 5: Environmental Management (6%)

The smallest domain, but high-confidence points if you memorize the framework and statute names:

Pollution prevention and protection -- spill containment, abatement, best management practices

Hazardous materials management -- GHS classification, storage and handling, security; hazardous waste storage and disposal under RCRA (generator categories VSQG/SQG/LQG, cradle-to-grave manifests)

Waste management -- universal waste, recycling, spill clean-up, labeling, remediation; CERCLA/Superfund liability

Sustainability -- supply chain; reduce, reuse, recycle; lifecycle thinking

Environmental issues and impact -- aging infrastructure, asbestos, air pollution, climate change, and ESG (environmental, social, and governance)

Core statutes -- know the names and scope of RCRA, CERCLA, the Clean Air Act, the Clean Water Act, TSCA, and EPCRA

Domain 6: Occupational Health and Applied Science (10%)

This domain merges industrial hygiene with the chemistry and physics concepts that CSP10 placed in its science and math domain -- a calculation-heavy area of the exam:

Exposure assessment -- anticipate, recognize, evaluate, and control exposures (chemicals, SDS, radiation, noise, biological hazards, silica, combustible dust, heat/cold stress, indoor air quality, ventilation, lasers, nanoparticles)

IH sampling and limits -- personal vs area sampling, full-shift TWA vs task-based; OSHA PELs (legal) vs ACGIH TLVs vs NIOSH RELs; NIOSH Pocket Guide lookups for IDLH/PEL/REL/TLV

Noise -- OSHA general-industry rule 1910.95: PEL 90 dBA 8-hr TWA with 5-dB exchange and 85 dBA Action Level (Hearing Conservation Program); NIOSH REL 85 dBA with 3-dB exchange; dose D = (C1/T1 + ... + Cn/Tn) x 100

Toxicology -- LD50/LC50, mutagens, carcinogens, teratogens, ototoxins; building exposure control plans

Public health -- fundamentals of epidemiology, infectious disease, risk factors, and statistics to interpret data

Ergonomics and human factors -- NIOSH Revised Lifting Equation (RWL = LC x HM x VM x DM x AM x FM x CM, LC = 51 lb / 23 kg), RULA, REBA, anthropometrics, vibration, fatigue management

Applied chemistry and physics -- containment-volume calculations, vapor pressure, UEL/LEL; forms of energy, weights, forces, stresses; ventilation Q = VA

  • Domain 7: Training (10%)
  • Needs assessment -- determine worker training, competencies, and required qualifications

Program design -- ANSI/ASSP Z490.1 criteria; the ADDIE model (Analyze, Design, Develop, Implement, Evaluate); materials for varied learning styles

Delivery methods -- classroom, online, simulation, computer-based, coaching, on-the-job training, and AI-assisted instruction

Adult learning -- Knowles's andragogy; VARK styles (visual, auditory, reading/writing, kinesthetic)

Effectiveness -- continuous-improvement model; Kirkpatrick's four levels (Reaction, Learning, Behavior, Results), with Phillips ROI as Level 5; surveys, assessments, on-the-job compliance

OSHA training mandates -- LOTO, permit-required confined space, HAZWOPER (40/24/8 hr), respiratory protection, PPE, bloodborne pathogens

Law and Ethics in CSP11

CSP11 has no separate law or ethics domain, but regulations and standards still appear in Program Management. On exam day you must agree to the BCSP Code of Ethics before the exam starts, and recertification cycles beginning on or after July 1, 2023 require 0.5 points from ethics courses. Keep this legal content sharp:

OSH Act of 1970 -- Section 5(a)(1) General Duty Clause, 5(a)(2) specific standards, 11(c) anti-retaliation

OSHA recordkeeping -- 29 CFR 1904; work-relatedness, recordable vs reportable; report fatalities within 8 hours and in-patient hospitalization, amputation, or loss of an eye within 24 hours (1904.39)

Workers' Compensation -- state-administered, no-fault exclusive remedy; FELA (railroad, fault-based) and the Jones Act (maritime) sit outside it

BCSP Code of Ethics -- professional conduct, conflicts of interest, and public protection; candidates agree to it before the exam

Cost Stack (2026)

  • Item Cost
  • Application fee $160
  • Exam fee $350
  • Exam bundle (2 attempts + 1 self-assessment) $600
  • Retake (additional exam fee) $350
  • Eligibility extension (1 year) $100
  • Annual renewal $185
  • Study materials (books, practice) $300-$900
  • First-year total (application, exam and self-study) $810-$1,410

Many employers reimburse the CSP. Negotiate it into your annual EHS budget or training line.

Registration via Pearson VUE

Once BCSP approves your application, you have one year to take and pass the exam. Steps:

  • Log in to BCSP My Profile and select "Purchase Exam"
  • Use the single sign-on (SSO) link from My Profile to reach Pearson VUE
  • Choose a Pearson VUE test center (BCSP does not offer online or remote proctored exams), date, and time
  • Save your appointment confirmation emails

A one-time $100 extension can be bought within the last 60 days of eligibility. Schedule, reschedule, or cancel only through BCSP and Pearson, not the local test center; you forfeit the exam authorization and fee if you miss or arrive late for the appointment or present ID that does not match.

Test center tips:

Arrive 30 minutes early with a current government-issued ID showing your photo and signature; the name must match your BCSP record exactly

  • You cannot bring a calculator; the exam provides an on-screen calculator that emulates the TI-30XS
  • You can take self-scheduled breaks, but the clock does not stop and you must stay in the building
  • Recertification: 25 Points Every 5 Years

BCSP requires recertification points to keep CSP holders current:

25 recertification points per 5-year cycle , including 0.5 points from an ethics course (required for cycles beginning on or after July 1, 2023)

  • $185 annual renewal fee
  • Cycles normally run five years from July 1 to June 30; worksheets are due by July 31 after the cycle ends

Eligible activities, fully listed in BCSP's Recertification Guide, include professional memberships, conferences and seminars, safety-related courses or a degree, and BCSP recertPRO

  • Log activities in your BCSP My Profile account as you earn them
  • BCSP randomly audits 5% of submitted worksheets, so retain the original documentation

Use of the credential expires if you have not paid the annual renewal fee or met the recertification requirements. Late renewal payers may incur a late charge, or a reinstatement fee if BCSP has acted to terminate the credential.

16-24 Week CSP Study Plan

A typical plan is 150-250 hours over 16-24 weeks, adjusted for your background.

  • Phase 1: Weeks 1-4 -- Baseline and Math (35 hours)
  • Take a full diagnostic practice exam to identify weak domains
  • Refresh college algebra, trig, and unit conversions
  • Master the applied-science formulas (Domain 6): NIOSH Lifting, Q = VA, WBGT, noise dose, heat stress
  • Read Brauer Safety and Health for Engineers (4th edition) Chapters 1-8
  • Phase 2: Weeks 5-10 -- Management Systems and Risk (60 hours)
  • Deep dive ISO 45001:2018 and ANSI/ASSP Z10.0-2019 clauses
  • Work through FMEA, FTA, Bowtie example problems (10+ each)
  • Memorize PSM 14 elements and VPP tiers
  • Complete Domain 2 and 3 practice sets; target 80%+ accuracy
  • Phase 3: Weeks 11-16 -- IH, Fire, Environmental (50 hours)
  • NIOSH Pocket Guide drills (lookups, PEL vs TLV vs REL)
  • NFPA 101, 72, 10 memorization (travel distances, detector spacing)
  • RCRA generator categories, CAA/CWA permit programs
  • Two full 5.5-hour timed practice exams under test conditions
  • Phase 4: Weeks 17-24 -- Records, Ethics, Training, Review (40-60 hours)
  • OSHA recordkeeping deep dive (1904.39 reporting triggers, work-relatedness)
  • Review the BCSP Code of Ethics
  • Two more full-length simulated exams; review ALL missed items
  • Free CSP practice questions --> -- work weak domains until 85%+ on random sets
  • Free and Paid Resources

BCSP-published:

BCSP CSP Self-Assessment -- paid; built on the blueprint, half the length of the full exam, with six months of access (included in the $600 exam bundle)

BCSP CSP page and CSP11 Examination Blueprint -- the authoritative source for fees, eligibility, and current domain weights (free PDF on bcsp.org)

CSP Exam References (PDF) -- free; BCSP's list of references frequently used in exam development (not comprehensive)

BCSP CSP examCORE -- BCSP's online self-paced course; BCSP says completing it does not guarantee a pass

Core books:

Roger Brauer, Safety and Health for Engineers (4th edition, Wiley) -- broad safety engineering reference

Free:

  • NIOSH Pocket Guide to Chemical Hazards (niosh.cdc.gov)
  • OSHA eTools and eCFR Title 29 Part 1910 / 1926
  • EPA laws and regulations page for RCRA/CERCLA/CAA/CWA primers
  • Our FREE CSP practice question bank
  • Test-Day Strategy

The 5.5-hour CSP is a stamina test as much as a knowledge test. Plan accordingly:

Sleep 8 hours the night before. Do not cram.

Eat protein + complex carbs for breakfast. Avoid heavy sugar.

Eat before you arrive -- food and drinks are not allowed in the testing room, and you cannot reach personal belongings during breaks (the clock continues)

Pacing -- 200 questions in 330 minutes is about 1.65 minutes (~99 seconds) per question. Move briskly on recall items and bank time for math problems.

Mark and move -- flag any item taking >2 minutes and return later. Do not bleed time on one question.

On-screen calculator -- practice on a TI-30XS or its emulator; you cannot bring your own calculator.

Units discipline -- the CSP loves to punish unit confusion (ft vs m, ppm vs mg/m^3, dB vs dBA). Double-check.

Two bathroom breaks max -- you will lose time unprofitably past that.

Common Pitfalls

Math fluency gaps. Heat stress WBGT, ventilation Q = VA, noise dose logarithmic summation -- all are log/ratio operations that non-engineers flub. Drill until automatic.

Confusing PEL vs TLV vs REL. Know which is legal (PEL), advisory (TLV, REL), and which tend to be more stringent (TLV/REL).

Noise math errors. OSHA uses 5-dB exchange rate and 90 dBA PEL; NIOSH uses 3-dB and 85 dBA REL. Read the question.

Hierarchy of controls misapplication. Substituting a less-hazardous solvent is substitution , not engineering. Enclosing the process is engineering. PPE is last.

Reporting trigger confusion. 8 hours for fatality, 24 hours for hospitalization/amputation/loss of eye. Do not mix them.

Risk tool mismatch. FMEA, FTA, HAZOP, and Bowtie are not interchangeable. The exam will test which tool fits a given scenario.

Over-studying Environmental. It is only 6% of the exam (Domain 5). Do not disproportionately invest.

Ignoring regulations. CSP11 has no separate law domain, but Program Management still covers the regulations and standards that plans, systems, and policies must include.

Career Value: Is the CSP Worth It?

BCSP does not publish CSP salaries. It says its 2023 safety salary survey found that those holding a BCSP certification typically earn more than their counterparts. For context, the U.S. Bureau of Labor Statistics reports a May 2025 median of $90,150 for occupational health and safety specialists, with the highest 10% above $134,950. Whether a role prefers or requires the CSP depends on the employer and contract.

ASP / CSP / CHMM / GSP / OHST Comparison

Credential Body Education Experience Exam Focus

ASP BCSP Bachelor's or qualifying SH&E associate 1 yr 200 Q / 5 hr Broad SH&E knowledge (a CSP qualified credential)

  • CSP BCSP Bachelor's 4 yr 200 Q / 5.5 hr Senior SH&E practice
  • GSP BCSP Bachelor's or master's from a BCSP QAP 0 yr None (designation) Meets the CSP credential requirement

OHST BCSP None required 3 yr, 35% technical SH&E duties 200 Q / 4 hr Occupational hygiene and safety technician

The CSP is the broadest of these; the CIH (a separate credential from the Board for Global EHS Credentialing) goes deeper in industrial hygiene and is also on BCSP's qualified-credential list.

Final Word: The CSP Is the Gateway to Senior EHS Leadership

If you are serious about a long-term safety career, the CSP is the senior BCSP credential to aim for. Pass rates are moderate and study is demanding. The ASP proves you know the body of knowledge; the CSP proves you can apply it. Hiring managers read them accordingly.

Build the plan. Work the blueprint. Drill the math.