Cheat sheet

NRFSP Food Safety Manager Cheat Sheet

Practice this exam

Implementing Active Managerial Control

  • 12.50% of exam
  • Managerial Control HACCP Principles Retake Rules Food defense

Managing Personnel

  • 11.25% of exam
  • Personnel and Hygiene Exclude vs Restrict Double Gloves Reportable diagnoses

Addressing Allergen Issues

  • 10.00% of exam
  • Allergen Controls Cross-Contact vs Cross-Contamination Written notification Ingredient substitutions

Purchasing, Receiving, and Storing Practices

  • 6.25% of exam
  • Receiving and Storage Shellstock records Approved sources Raw separation

Preparing Foods

  • 20.00% of exam
  • Cooking Endpoints Cooling and Reheating Special Processes Cooking and Reheating Picker

Serving Foods

  • 10.00% of exam
  • Serving Controls Food Control Picker Four-Hour vs Six-Hour TPHC Clean tableware

Cleaning and Sanitizing

  • 8.75% of exam
  • Cleaning and Heat Sanitizing Chemical Sanitizer Conditions Manual vs Mechanical Heat Chlorine pH conditions

Managing Establishment Facilities

  • 15.00% of exam
  • Facility Controls Lighting Air gap Pest exclusion

Responding to Crises

  • 6.25% of exam
  • Crisis Response Regulatory approval Recall lot codes Written cleanup procedures

Quick Facts

  • Program FSMCE; CFP-standard certification
  • Total questions 85; January 2026 handbook
  • Blueprint allocation 80 domain items
  • Time limit 2 hours
  • Passing score Scaled≥75; not 75% correct
  • Certification Up to 5 years; local rules
  • Technical reference FDA Food Code 2026 model
  • Exam-day identification Valid photo ID; follow handbook

HACCP Order MA

  • Hazards, points, limits, monitor, correct, verify, records.
  • H: hazard analysis P: critical control points L: critical limits M: monitoring C: corrective actions V: verification R: recordkeeping

Managerial Control MA

  • Person in charge Ensure food-safety duties during operations
  • Active managerial control Monitor risks; correct unsafe practices
  • Food defense Intentional adulteration; report suspicious activity
  • FDA model provisions Check locally adopted edition and amendments

HACCP Principles MA

  • 1. Hazard analysis Identify significant biological, chemical, physical hazards
  • 2. Critical control points Steps essential to control significant hazards
  • 3. Critical limits Measurable acceptable boundaries at CCPs
  • 4. Monitoring Observe or measure CCP control
  • 5. Corrective actions Restore control; determine affected-food disposition
  • 6. Verification Confirm validity and effective plan operation
  • 7. Records Document procedures, monitoring and corrective actions

Retake Rules MA

  • First→second attempt Wait full 24h
  • Any 30-day period No more than 2attempts
  • Second failure→third attempt Wait at least 60days
  • Any 12-month period Maximum 4attempts
  • After third failure Separate minimum interval not stated Confirm permitted fourth-attempt date

Exclude vs Restrict PE

Exclude

  • Keep employee out of establishment
  • Vomiting/diarrhea unless noninfectious

Restrict

  • Prevent food and clean-equipment contact
  • Specified illness or exposure cases
  • Diagnosis, symptoms and population determine response

Personnel and Hygiene PE

  • Written employee illness policy Reporting, exclusion, restriction and reinstatement Maintain; available upon request
  • Reportable symptoms Vomiting; diarrhea; jaundice; fevered sore throat Also inadequately covered infected wounds
  • Reportable viral diagnoses Norovirus; hepatitis A Report even without symptoms
  • Reportable bacterial diagnoses Shigella; STEC; Salmonella Typhi; nontyphoidal Salmonella STEC means Shiga-toxin-producing E. coli
  • Vomiting or diarrhea Exclude unless noninfectious condition Apply illness-specific reinstatement criteria
  • Standard handwashing ≥20s overall; rub≥10–15s Rinse; dry; equipped handwashing sink
  • Infected finger wound Impermeable cover plus single-use glove
  • Ordinary single-use gloves One task; discard damaged, soiled, contaminated Wash hands before donning

Double Gloves PE

Ordinary single-use glove

  • One task; discard if contaminated
  • Handwashing before new-task gloves

Approved double-glove method

  • Task-specific loose outer glove
  • Gravity removal; preserve clean intact interior
  • Discard single-use exterior after use
  • Regulatory approval and all conditions required

Cross-Contact vs Cross-Contamination AL

Allergen cross-contact

  • Unintended allergen incorporation
  • Clean away allergen protein

Microbial cross-contamination

  • Pathogens transfer between foods/surfaces
  • Separate raw from ready-to-eat
  • Full cleaning addresses both hazards

Allergen Controls AL

  • Major animal-food allergens Milk; eggs; fish; crustacean shellfish
  • Other major allergens Tree nuts; peanuts; wheat; soybeans; sesame
  • Cross-contact Unintentional allergen incorporation into food
  • Allergen-contaminated surfaces Full wash→rinse→sanitize→air-dry cleaning Remove protein; minimize transfer
  • Substituted ingredient Recheck ingredient and allergen information
  • Unpackaged foods; allergen ingredients Written major-allergen notification

Receiving and Storage RE

  • Approved food source Complies with applicable law
  • Refrigerated TCS receipt Food≤41°F; distribution-law exceptions
  • Raw shell-egg receipt Refrigerated equipment; ambient air≤45°F
  • Labeled, shipped-frozen food Receive frozen; inspect temperature-abuse evidence
  • Raw animal-food storage Separate from RTE; prevent cross-contamination Separate raw types; specified exceptions
  • Shellstock tag retention 90days from last sold/served date Record date; preserve source identification

Standard Cooling Clock PR

  • Two to seventy; six total to forty-one.
  • Cooked TCS:135°F→70°F≤2h Cooked TCS:135°F→41°F≤6h total Clock starts at 135°F

ROP Variance vs No-Variance Criteria PR

Variance required

  • ROP outside specified safety criteria
  • Obtain variance before starting
  • Submit HACCP plan for approval

Qualifying no-variance ROP

  • Follow §3-502.12 process criteria
  • Provide required HACCP before starting
  • Narrow 48h exception waives HACCP
  • 48h exception requires all three conditions

Cooking and Reheating Picker PR

  • Conventional poultry cooking → ≥165°F instantaneous ( All parts )
  • Ground meat; conventional cooking → ≥155°F for 17s ( Code equivalent combinations permitted )
  • Intact fish; conventional cooking → ≥145°F for 15s ( Stuffed and comminuted categories differ )
  • Raw eggs; individual immediate-service order → ≥145°F for 15s ( Other eggs use different endpoint )
  • Plants cooked for hot holding → ≥135°F ( Applicable manufacturer instructions )
  • Ordinary cooked, cooled TCS; hot holding → Reheat≥165°F for 15s ( 41°F→target within 2h )
  • Inspected-plant packaged RTE; hot-holding reheat → ≥135°F ( 41°F→target within 2h )
  • Microwave raw animal-food cooking → All parts≥165°F; cover; rotate/stir ( Stand covered 2min after cooking )

Cooking Endpoints PR

  • Poultry; stuffed animal foods ≥165°F instantaneous Conventional cooking
  • Ground meat; non-intact meat ≥155°F for 17s Code equivalent combinations permitted
  • Intact fish; intact meat ≥145°F for 15s Separate roast and steak exceptions
  • Raw eggs; immediate individual order ≥145°F for 15s
  • Plant foods; hot holding ≥135°F; applicable manufacturer instructions

Cooling and Reheating PR

  • Standard cooked-TCS cooling; first stage 135°F→70°F within 2h
  • Standard cooked-TCS cooling; total 135°F→≤41°F within 6h total
  • Ambient-ingredient TCS preparation Cool to≤41°F within 4h
  • Cooling methods Shallow pans; smaller portions; ice baths Protect from contamination
  • Ordinary cooked, cooled TCS; hot-holding reheat ≥165°F for 15s; within 2h Separate microwave and roast rules
  • Inspected-plant packaged RTE; hot-holding reheat ≥135°F within 2h

Special Processes PR

  • Nonexempt refrigerated RTE TCS; >24h ≤41°F; maximum 7days Preparation or opening counts Day1
  • Combined date-marked ingredients Retain earliest ingredient date
  • Keep-frozen ROP fish; refrigerator thaw Remove packaging before thawing Water thaw has separate timing
  • Qualifying no-variance ROP HACCP Provide plan to authority before implementation Meet applicable process criteria
  • 48-hour ROP no-HACCP exception Label production time/date; refrigerate≤41°F Remove in-establishment within 48h

Four-Hour vs Six-Hour TPHC SE

Four-hour ordinary method

  • Initial cold≤41°F or hot≥135°F
  • Written procedures; mark four-hour deadline
  • Cook-and-serve, serve RTE, or discard≤4h

Six-hour cold method

  • Initial≤41°F; warmest≤70°F; monitor
  • Written procedures; mark start and deadline
  • Cook-and-serve, serve RTE, or discard≤6h
  • Discard if>70°F
  • Unmarked food requires discard

Food Control Picker SE

  • Ordinary refrigerated TCS receipt → Food≤41°F ( Distribution law may specify otherwise )
  • Raw shell-egg receipt → Refrigerated equipment; ambient air≤45°F
  • Standard cooked-TCS cooling → 135°F→70°F≤2h; 135°F→41°F≤6h ( Six hours total; protected cooling )
  • Nonexempt RTE TCS refrigerated>24h → Date mark; ≤41°F; maximum 7days ( Preparation/opening=Day1; preserve earliest date )
  • Four-hour TPHC; RTE; ordinary starting temperatures → Start cold≤41°F or hot≥135°F ( Written plan; mark; serve/discard≤4h )
  • Six-hour cold TPHC; RTE food → Start≤41°F; warmest≤70°F; monitor ( Written plan; mark times; serve/discard≤6h )
  • TPHC unmarked or deadline exceeded → Discard food ( Six-hour method: discard if>70°F )
  • HSP establishment; raw eggs → Do not use TPHC ( HSP means highly susceptible population )

Serving Controls SE

  • Usual TCS cold holding ≤41°F; specified exceptions
  • Usual TCS hot holding ≥135°F Qualifying roasts≥130°F
  • TPHC Time as public health control Written procedures prepared in advance
  • Six-hour cold TPHC; RTE food Start≤41°F; monitor warmest portion≤70°F Mark times; serve/discard within 6h
  • Buffet return Use clean tableware Protect displays; trained self-service monitoring
  • Utensil stored in food Handle above food and container Separate specified storage methods permitted

Surface Reset SA

  • Wash, rinse, sanitize, air-dry.
  • Remove debris first Food-contact surfaces: sanitize after cleaning Air-dry; avoid towel recontamination

Manual vs Mechanical Heat SA

Manual immersion

  • Water≥171°F
  • Immersion≥30s

Mechanical cycle

  • Utensil surface≥160°F
  • Verify irreversible indicator
  • Manifold minimum depends on machine type

Cleaning and Heat Sanitizing SA

  • Food-contact cleaning sequence Wash→rinse→sanitize→air-dry
  • TCS-contact equipment; ordinary frequency Clean at least every 4h Specified exceptions; contamination demands earlier
  • Manual hot-water immersion Water≥171°F for≥30s
  • Mechanical hot-water utensil surface Reach≥160°F; irreversible temperature indicator
  • Stationary-rack single-temperature machine manifold Final rinse≥165°F Separate utensil-surface verification
  • Other hot-water machine manifold Final rinse≥180°F Separate utensil-surface verification

Clean vs Sanitize SA

Clean

  • Remove food residues and soil
  • Prepare surfaces for sanitizing

Sanitize

  • Reduce microorganisms on clean food-contact surfaces
  • Follow conditions and contact time
  • Vomit cleanup may require separate disinfection

Chemical Sanitizer Conditions SA

  • All chemical sanitizers EPA-registered label and applicable Code conditions
  • Chlorine 50–99mg/L; pH≤8 Minimum 75°F Meet label and contact-time requirements
  • Chlorine 50–99mg/L; 8<pH≤10 Minimum 100°F Other chlorine-table entries differ
  • Standard iodine concentration and temperature 12.5–25mg/L; minimum 68°F
  • Standard iodine pH ≤5 or manufacturer-specified effective pH
  • Standard quaternary ammonium solution Labeled concentration; minimum 75°F
  • Quaternary ammonium water hardness ≤500mg/L or EPA-label-specified limit
  • Sanitizer concentration verification Appropriate test kit; follow kit instructions

Facility Controls FA

  • Facility plan review Before construction, conversion, qualifying operational changes
  • Drinking-water source Approved public or lawful nonpublic system
  • Air gap; inlet→flood-level rim ≥2×inlet diameter; never below 1in
  • Handwashing sink Accessible; handwashing use only
  • Walk-in and dry-storage lighting ≥10fc at 30in above floor
  • Self-service food-surface lighting ≥20fc
  • Knife-work food-surface lighting ≥50fc
  • Pest prevention Protect openings; inspect; remove harborage

Crisis Response CR

  • Possible imminent health hazard Stop affected operations; notify regulatory authority Specified emergency-plan exception
  • Resume discontinued operations Obtain regulatory-authority approval first
  • Vomit or diarrheal event Implement written cleanup procedures Pathogen-specific disinfectant; EPA-label directions
  • Recalled food Match lot codes; segregate; follow disposition Never donate recalled products
  • Severe allergic reaction Emergency medical help promptly Stop eating; follow emergency treatment plan

Common Traps

Scaled Score

  • NRFSP pass: scaled75 ≠ Fixed 75% or 60/80 shortcut

Cooling Clock

  • Six hours from 135°F ≠ Six more hours after 70°F

Poultry Endpoint

  • Conventional poultry:165°F instantaneous ≠ Universal 15-second poultry hold

Chlorine Conditions

  • 50–99mg/L at75°F requires pH≤8 ≠ Same minimum regardless of pH

Iodine Temperature

  • Standard iodine minimum68°F ≠ Universal 75–120°F iodine range

Quaternary Ammonium

  • Product's labeled concentration ≠ Universal 200mg/L quats recipe

ROP Plan

  • Qualifying no-variance plan provided before implementation ≠ Blanket prior approval for all ROP

Exam Counts

  • Handbook85 total; blueprint80 allocated ≠ Difference proves five unscored questions

Last Minute

  • 1. NRFSP pass: scaled 75; percentage differs
  • 2. Conventional poultry: ≥165°F instantaneous
  • 3. Ground meat: 155°F×17s; equivalents permitted
  • 4. Intact fish: 145°F×15s; stuffed category differs
  • 5. Standard cooling: 135°F→70°F≤2h;135°F→41°F≤6h total
  • 6. Ordinary TCS holding: cold≤41°F; hot≥135°F
  • 7. Six-hour TPHC:start≤41°F;monitor≤70°F;mark;serve/discard≤6h
  • 8. Date-marked RTE TCS:≤41°F;7days;Day1 preparation/opening
  • 9. Manual immersion:≥171°F for≥30s
  • 10. Mechanical sanitizing:utensil surface≥160°F; verify indicator
  • 11. Sanitizers:EPA label plus Code conditions
  • 12. Recall:lot codes; segregate; follow disposition
  • 13. Imminent hazard:stop affected operations;notify authority
  • 14. ROP48h exception:time/date label;≤41°F;remove in-establishment

NRFSP Food Safety Manager Certification

  • Practice Questions 167 questions Study Guide 36 topics Cheat Sheet 85 facts Flashcards 50 cards Free CE Podcast