Cheat sheet

OSHA #511 General Industry Standards Course Cheat Sheet

Practice this exam

Course Scope and Standards Navigation

  • Not published of exam
  • Course identity Eligibility 29 CFR structure Scope and application Standards lookup Trainer path

OSHA Policy and Recordkeeping

  • Not published of exam
  • OSH Act General Duty Clause Enforcement Worker rights Part 1904 Severe reporting

Surfaces, Egress, and Fire

  • Not published of exam
  • Walking surfaces Fall protection Ladders Exit routes Emergency plans Fire protection

Chemicals, PPE, and Confined Spaces

  • Not published of exam
  • Hazard communication Hazardous materials PPE assessment Respirators Permit spaces Atmospheric testing

Energy, Materials, and Machines

  • Not published of exam
  • Lockout tagout Materials handling Industrial trucks Machine guarding Hand tools Abrasive wheels

Electrical, Welding, and Occupational Health

  • Not published of exam
  • Electrical work Flexible cords Hot work Compressed gases Noise Air contaminants

Quick Facts

  • Course OSHA #511
  • Type OTI standards course
  • Industry General industry
  • Primary standards 29 CFR 1910
  • Minimum contact 26 hours
  • Prerequisites None
  • Provider Authorized OTI Education Center
  • Completion Course completion certificate
  • Attendance Full attendance required
  • National exam None published
  • Domain weights None published
  • Trainer path Precedes OSHA #501
  • Fundamentals program Required course

CFR Source Map CO

  • 1903 inspects, 1904 records, 1910 protects
  • 1903: enforcement 1904: records 1910: standards

OSHA #511 vs OSHA 30-Hour CO

OSHA #511

  • Standards-focused OTI course
  • Minimum 26 contact hours
  • Completion certificate

OSHA 30-Hour

  • Worker hazard-awareness class
  • Thirty contact hours
  • Outreach completion card
  • They are not equivalent

Find the Governing Source CO

  • Inspection or citation procedure → Check Part 1903
  • Injury recording or reporting → Check Part 1904
  • General industry hazard → Check Part 1910
  • Construction operation → Check Part 1926
  • State Plan jurisdiction → Check state requirements
  • No specific standard applies → Evaluate General Duty

Course Identity and Eligibility CO

  • OSHA #511 General industry standards course
  • Course purpose Locate and apply requirements
  • Minimum contact hours At least 26
  • Prerequisites None
  • Eligible learners Anyone interested in workplace safety
  • Authorized provider OTI Education Center
  • Successful completion Course completion certificate
  • Attendance Attend all training sessions
  • Fees and schedule Vary by Education Center
  • Delivery eligibility Confirm center and regional rules
  • OSHA 30-Hour Not equivalent to #511
  • Trainer authorization Not granted by #511
  • #501 prerequisites #511 plus five years experience
  • Experience substitution OSH degree, CSP, or CIH
  • Maximum substitution Two years experience

Course Outcomes CO

  • Define, identify, locate, determine, apply
  • Terms Hazards Standards Requirements Programs

OSHA #511 vs OSHA #501 CO

OSHA #511

  • No prerequisites
  • Standards application course
  • Does not authorize trainers

OSHA #501

  • Separate trainer course
  • Five years safety experience
  • Can authorize Outreach trainers
  • Standards course precedes trainer course

Official Course Outcomes CO

  • Define terms Use general industry vocabulary
  • Identify hazards Recognize general industry exposures
  • Locate standards Find applicable OSHA sections
  • Determine requirements Match facts to provisions
  • Locate policies Use current OSHA guidance
  • Locate procedures Follow applicable OSHA process
  • Apply standards Supplement ongoing safety programs
  • Hazard emphasis Focus on hazardous operations

Certificate vs Certification CO

Course Certificate

  • Documents successful completion
  • Issued by Education Center
  • Applies to one course

Certification

  • Separate professional credential
  • Usually certifies competence
  • Not created by #511
  • Completion is not certification

Standards Navigation Map CO

  • 29 CFR 1903 Inspections, citations, proposed penalties
  • 29 CFR 1904 Injury recording and reporting
  • 29 CFR 1910 General industry standards
  • Part Broad regulatory collection
  • Subpart Standards grouped by subject
  • Section Numbered enforceable standard
  • Paragraph Specific requirement level
  • Scope Check coverage before applying
  • Definitions Control how requirements apply
  • Incorporated standard Referenced material becomes enforceable
  • State Plan May impose different requirements
  • General industry Excludes agriculture, construction, maritime

Safety and Health Fundamentals CO

  • Program General Industry certificate
  • OSHA #511 One required course
  • Total courses At least seven
  • Total contact hours At least 68
  • Required courses Three totaling 39 hours
  • Elective courses At least four
  • Elective contact hours At least 29
  • Course transfer Across OTI Education Centers
  • Application After final required course
  • Proof Certificates or transcript
  • Program fee May apply by Center
  • Credential scope Separate multi-course certificate

Scheduling and Delivery CO

  • Current offerings Use OSHA searchable schedule
  • Dates and tuition Vary by Education Center
  • Registration Through authorized Center
  • In-person Available by offering
  • VILT Live instructor-led training
  • VILT eligibility Attend within OSHA region
  • Self-paced online Not an OTIEC format
  • Attendance All sessions required

Part 1904 vs Part 1910 AG

Part 1904

  • Records injuries and illnesses
  • Reports severe events
  • Contains OSHA forms

Part 1910

  • Controls workplace hazards
  • Organized by subparts
  • General industry standards
  • Record events vs control hazards

Respond to an Event AG

  • Work-related fatality → Report within eight hours
  • Inpatient hospitalization → Report within 24 hours
  • Amputation or eye loss → Report within 24 hours
  • Treatment beyond first aid → Evaluate recordability
  • OSHA citation received → Post near hazard
  • Citation disputed → Contest within 15 working days

OSH Act and Enforcement AG

  • Section 5(a)(1) General Duty Clause
  • Section 5(a)(2) Employers follow OSHA standards
  • Section 5(b) Employees follow applicable rules
  • Specific standard Use before General Duty
  • Recognized hazard Known serious workplace danger
  • Federal OSHA Enforces federal requirements
  • State Plan At least as effective as federal
  • Worker complaint May prompt OSHA inspection
  • Employee representative May join inspection walkaround
  • Opening conference Explains inspection scope
  • Walkaround Examines workplace conditions
  • Closing conference Discusses apparent findings
  • Citation posting Post near cited hazard
  • Posting duration Abatement or three working days
  • Contest period 15 working days

Recordable vs Reportable AG

Recordable

  • Enter qualifying case
  • Use OSHA 300
  • Part 1904 criteria

Reportable

  • Notify OSHA promptly
  • Severe event categories
  • Eight or 24 hours
  • Different duties and deadlines

Recordkeeping and Severe Reporting AG

  • OSHA 300 Injury and illness log
  • OSHA 301 Incident detail report
  • OSHA 300A Annual summary
  • Recordable case Meets Part 1904 criteria
  • Medical treatment Beyond OSHA-defined first aid
  • Loss of consciousness Recordable when work-related
  • Days away Count calendar days after event
  • Day-count cap 180 calendar days
  • Fatality Report within 8 hours
  • Inpatient hospitalization Report within 24 hours
  • Amputation or eye loss Report within 24 hours
  • Small-employer exemption Ten or fewer throughout last year
  • Severe-event reporting Applies despite recordkeeping exemption
  • 300A posting February 1 through April 30
  • Record retention Five years after covered year

EAP vs Fire Prevention Plan SU

EAP

  • Reports emergencies
  • Directs evacuation
  • Assigns response duties

FPP

  • Lists major fire hazards
  • Controls ignition sources
  • Controls combustible waste
  • Respond to emergencies vs prevent fires

Surfaces, Falls, and Ladders SU

  • 1910.22 housekeeping Clean, orderly, sanitary surfaces
  • Wet processes Provide drainage and dry footing
  • Surface capacity Support maximum intended load
  • Surface inspection Regularly and as necessary
  • Hazardous surface Correct or guard before reuse
  • Unprotected edge Protect at four feet
  • Hole protection Cover or guard openings
  • Portable ladders Excluded from 1910.28
  • Ladder inspection Before first use each shift
  • Defective ladder Tag and remove from service
  • Climbing Face ladder; grasp one hand
  • Stepladder top Never use as step
  • Upper landing access Extend three feet or secure

Egress and Fire Planning SU

  • Exit routes Usually at least two
  • Single exit Allowed only when safe
  • Exit discharge Leads outside or safe space
  • Exit door Openable inside without special knowledge
  • Exit door type Side-hinged
  • Outward swing High hazard or over fifty
  • EAP trigger Required by another OSHA standard
  • Small EAP Ten or fewer may communicate orally
  • EAP core Report, evacuate, account, assign duties
  • FPP core Control fuel and ignition hazards
  • Extinguisher access Mounted, identified, readily accessible
  • Visual inspection Monthly
  • Maintenance check Annually
  • Employee extinguisher education Initially and annually
  • Class A travel 75 feet maximum
  • Class B travel 50 feet maximum

Permit Space Air Order CH

  • Oxygen before combustibles before toxics
  • Oxygen Combustibles Toxics

Confined vs Permit Space CH

Confined Space

  • Large enough to enter
  • Limited entry or exit
  • Not designed for occupancy

Permit Space

  • Is a confined space
  • Contains specified serious hazard
  • Requires controlled entry
  • Hazards create permit status

Control a Workplace Hazard CH

  • Hazard can be removed → Eliminate it
  • Safer material exists → Substitute it
  • Exposure can be isolated → Engineer controls
  • Work method can change → Use administrative controls
  • Residual exposure remains → Select fitted PPE
  • Air contamination remains → Use suitable respirator

Hazard Communication and PPE CH

  • 1910.1200 Hazard Communication Standard
  • Written HazCom program Explains workplace implementation
  • Chemical list Inventory of hazardous chemicals
  • Container label Communicates immediate hazard information
  • Safety Data Sheet Detailed chemical information
  • HazCom training Initial assignment and new hazards
  • PPE hazard assessment Identify hazards before selecting equipment
  • Assessment certification Document workplace, person, date
  • PPE selection Match hazard and proper fit
  • PPE training Use, limits, care, disposal
  • Damaged PPE Do not use
  • PPE payment Employer pays, except listed exclusions

Control Order CH

  • Eliminate, substitute, engineer, administer, protect
  • Elimination Substitution Engineering Administrative PPE

Respirators and Permit Spaces CH

  • Respiratory priority Use feasible engineering controls first
  • Required respirator use Needs written worksite program
  • Respirator selection Match hazard, exposure, and user
  • Medical evaluation Before fit testing or use
  • Fit test Before use and at least annually
  • User seal check Every tight-facepiece use
  • Oxygen deficient Below 19.5 percent
  • Confined space Entry-sized, limited access, nonoccupancy design
  • Permit space Contains specified serious hazards
  • Workplace evaluation Identify permit spaces
  • Employee warning Sign or equally effective means
  • Atmospheric test order Oxygen, combustibles, toxics
  • Authorized entrant Enters under the permit
  • Attendant Remains outside and monitors
  • Entry supervisor Verifies and authorizes entry
  • Retrieval Use non-entry rescue when feasible
  • Canceled permits Retain at least one year

LOTO Flow EN

  • Prepare, stop, isolate, lock, release, verify
  • Prepare Shutdown Isolate Apply Release Verify

Authorized vs Affected Employee EN

Authorized

  • Performs servicing
  • Applies lockout devices
  • Controls hazardous energy

Affected

  • Operates affected equipment
  • Works in affected area
  • Understands procedure purpose
  • Different LOTO responsibilities

Match Hazard to Standard EN

  • Unexpected startup during servicing → Use 1910.147
  • Serious confined-space hazard → Use 1910.146
  • Chemical communication gap → Use 1910.1200
  • Four-foot unprotected edge → Use 1910.28
  • Powered industrial truck → Use 1910.178
  • Machine danger zone → Use 1910.212

Lockout and Tagout EN

  • 1910.147 scope Servicing with hazardous energy risk
  • Energy-control program Procedures, training, periodic inspections
  • Authorized employee Applies energy-control devices
  • Affected employee Uses or works near equipment
  • Preparation Know energy type and magnitude
  • Shutdown Stop equipment normally
  • Isolation Disconnect every energy source
  • Device application Apply personal lockout or tagout
  • Stored energy Restrain or render safe
  • Verification Confirm isolation before work
  • Lockout Physically restrains isolating device
  • Tagout Warns but does not restrain
  • Periodic inspection At least annually
  • Inspection independence Another authorized employee inspects
  • Device removal Normally by its applier
  • Cord-and-plug exception Plug under exclusive control

Lockout vs Tagout EN

Lockout

  • Physically restrains device
  • Preferred when lockable
  • Needs identifiable personal device

Tagout

  • Warns against operation
  • Does not physically restrain
  • Needs equivalent protection measures
  • A tag is only warning

Materials and Industrial Trucks EN

  • Stored materials Stable and secure against collapse
  • Aisles Keep clear and permanently marked
  • Storage tiers Stack, block, interlock, limit height
  • Sling inspection Each day before use
  • Damaged sling Immediately remove from service
  • Rated capacity Never exceed marked limit
  • PIT authorization Trained and competent operators
  • PIT training Formal, practical, workplace evaluation
  • Operator evaluation At least every three years
  • Refresher triggers Unsafe event, change, poor evaluation
  • Pre-use examination Daily or after each shift
  • Unattended truck Out of view or 25 feet
  • Unattended forks Lower, neutralize, brake, power off
  • Unauthorized riders Not permitted

Machine and Tool Guarding EN

  • Point of operation Material processing area
  • Guarding hazards Nip, rotation, chips, sparks
  • Guard attachment Affix to machine when possible
  • Guard design Must not create hazards
  • Danger zone Keep body parts outside
  • Special hand tools Supplement guards, never replace them
  • Fixed machinery Anchor against movement
  • Tool condition Employer maintains safe equipment
  • Compressed-air cleaning Under 30 psi; guarding and PPE
  • Abrasive wheel Ring-test before mounting
  • Bench-grinder work rest Maximum one-eighth inch gap
  • Bench-grinder tongue guard Maximum one-quarter inch gap

Electrical and Hot Work EL

  • Electrical default Deenergize exposed live parts
  • Energized exception Increased hazard or infeasibility
  • Energized work Use protective work practices
  • Qualified person Trained for exposed electrical hazards
  • Live-part guarding Required at least 50 volts
  • Working space Keep clear; never store items
  • Flexible cord Not fixed-wiring substitute
  • Cord routing Not through walls or doorways
  • Hot-work combustibles Move or protect within 35 feet
  • Fire watch Continue at least 30 minutes
  • Oxygen and fuel gas Separate by 20 feet
  • Separation barrier Five feet, 30-minute resistance
  • Cylinder movement Use valve-protection caps

Occupational Health Anchors EL

  • Noise action level 85 dBA eight-hour TWA
  • Hearing conservation Starts at action level
  • Noise PEL 90 dBA eight-hour TWA
  • Noise exchange rate Five decibels
  • Baseline audiogram Usually within six months
  • Annual audiogram After baseline for covered employees
  • Hearing protectors Offer at no cost
  • 1910.1000 tables Air-contaminant exposure limits
  • Eight-hour TWA Average exposure limit
  • Ceiling limit Never exceed listed concentration
  • Engineering controls Primary exposure reduction method
  • Work-practice controls Supplement exposure reduction
  • HazCom Communicates hazards, not exposure limits

Common Traps

Treating #511 as certification

  • It is an OTI course ≠ Completion yields a course certificate

Inventing national exam mechanics

  • OSHA publishes no national blueprint ≠ Check selected center policies

Equating #511 with OSHA 30

  • Different purpose and credential ≠ OSHA says they are nonequivalent

Assuming #511 authorizes teaching

  • Trainer authorization requires #501 ≠ Experience requirements also apply

Confusing two certificates

  • #511 yields course completion ≠ Fundamentals requires seven courses

Using construction fall thresholds

  • General industry commonly uses four feet ≠ Check specific operation exceptions

Confusing recording and reporting

  • Recording uses OSHA forms ≠ Reporting uses short deadlines

Applying federal text blindly

  • State Plans may differ ≠ Check jurisdiction before advising

Skipping standard scope

  • Read application and definitions first ≠ Exceptions can change the answer

Relying on PPE first

  • Use feasible higher controls ≠ PPE manages residual exposure

Last Minute

  • 1. Treat #511 as a course
  • 2. Use no invented exam weights
  • 3. Confirm selected center policies
  • 4. Navigate 1903, 1904, and 1910
  • 5. Read scope and definitions first
  • 6. Distinguish federal and State Plans
  • 7. Separate recording from reporting
  • 8. Recall four-foot fall protection
  • 9. Test permit-space air in order
  • 10. Verify isolation before servicing
  • 11. Guard every machine danger zone
  • 12. Deenergize electrical parts by default
  • 13. Use engineering controls before PPE
  • 14. Remember #501 is separate
  • 15. Fundamentals requires seven courses

OSHA 511 Occupational Safety and Health Standards for General Industry

  • Practice Questions 125 questions Study Guide 46 topics Cheat Sheet 211 facts Flashcards 50 cards Shorts 5 short s Free CE