Study guide
4.2 Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs)
ABC Wastewater Collection Operator Class I Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Gravity Sewers, System Components & Materials
1.1 Gravity Sewer Principles & System Layout 1.2 Sewer Pipe Materials, Sizing & Joining Methods 1.3 Manholes, Drop Structures & Appurtenances 1.4 Gravity Sewer Hydraulics, Slope & Scour Velocity
2 Chapter 2: Lift Stations, Pumping Systems & Force Mains
2.1 Lift Station Design: Wet Well vs Dry Well Systems 2.2 Wastewater Pumps & Operating Principles 2.3 Level Controls, Pump Sequencing & SCADA Telemetry 2.4 Force Mains, Valves & Surge Protection 2.5 Lift Station Emergency Power, Maintenance & Operation
3 Chapter 3: Sewer Inspection, Testing & Cleaning
3.1 Hydraulic Jetting & High-Velocity Cleaning 3.2 Mechanical Rodding, Bucketing & Clearing Methods 3.3 Closed-Circuit Television (CCTV) Inspection & NASSCO PACP 3.4 Sewer Testing Methods: Smoke, Dye & Acoustic 3.5 Root, Grease & Debris Management
4 Chapter 4: Inflow & Infiltration (I/I), SSOs & FOG Management
4.1 Inflow vs Infiltration Fundamentals & RDII 4.2 Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs) 4.3 SSO Emergency Response, Containment & NPDES Reporting 4.4 Fats, Oils, and Grease (FOG) Control Programs 4.5 Sewer System Rehabilitation & Trenchless Methods
5 Chapter 5: Safety, Confined Space Entry & Environmental Hazards
5.1 OSHA 1910.146 Permit-Required Confined Space Standards 5.2 Atmospheric Testing, Monitoring & Calibration Sequence 5.3 Ventilation, PPE & Emergency Rescue Equipment 5.4 Hydrogen Sulfide (H2S), Toxic Gases & Crown Corrosion 5.5 Trenching, Excavation & Traffic Safety (MUTCD & 811)
6 Chapter 6: Operator Math, Hydraulics & System Administration
6.1 Flow, Velocity & Cross-Sectional Area Calculations 6.2 Lift Station Hydraulics, Pumping Rate & Drawdown Math 6.3 Sewer Slope, Invert Elevations & Grade Calculations 6.4 Chemical Dosing, Feed Rate & Quantity Calculations 6.5 Regulatory Framework, Recordkeeping & System Mapping
7 Chapter 7: Equipment Operation, Tools & Preventive Maintenance
7.1 Gas Detectors, Flow Meters & Blowers: Operation and Calibration 7.2 Balling, Flushing, Poly Pigs & Cleaning-Method Selection 7.3 Heavy Equipment, Excavation & Hydro Excavation 7.4 Electrical Equipment: VFDs, Motor Control Centers & Low-Voltage Devices 7.5 Preventive Maintenance Programs, SOP/OEM Compliance & Support Tools
8 Chapter 8: System Restoration, Mapping & Emergency Operations
8.1 Manhole, Tap & Lateral Rehabilitation and Exfiltration Control 8.2 Appurtenance Inspection: Air Release Valves, Siphons, Regulators & Outfalls 8.3 Blueprints, GIS, Asset Management & System Mapping 8.4 Emergency Bypass Pumping & System Failure Response 8.5 New Pipe Installation Inspection & Acceptance Testing
9 Chapter 9: Monitoring, Safety Programs & System Administration
9.1 Flow Monitoring, Flow Meters & Sensor Calibration 9.2 Wastewater Characteristics & Abnormal Discharge Identification 9.3 Chemical Handling, Inventory, Feed Systems & Spill Response 9.4 Electrical Safety, Lockout/Tagout, Fire Safety & Occupational Health 9.5 Customer Service, Safety Programs, Operator Training & Regulatory Administration
4.2 Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs)
Key Takeaways Explain This Topic AI
A Sanitary Sewer Overflow (SSO) is an unpermitted discharge of untreated wastewater from a separate sanitary sewer system and represents a violation of the Clean Water Act.
Dry-weather SSOs are predominantly caused by physical blockages (FOG accumulation, root chokes, debris), structural collapses, and lift station mechanical or power failures.
Combined Sewer Overflows (CSOs) occur in single-pipe legacy systems carrying both sewage and runoff, and are regulated under the EPA CSO Policy using Nine Minimum Controls (NMC).
Municipalities with combined systems must develop Long-Term Control Plans (LTCPs) to eliminate CSOs or capture and treat wet-weather discharges to meet water quality standards.
Last updated: September 2026
Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs)
Quick Answer: A Sanitary Sewer Overflow (SSO) is an unpermitted release of untreated wastewater from a separate sanitary sewer system, which constitutes a direct violation of the Clean Water Act (CWA). A Combined Sewer Overflow (CSO) is a permitted discharge from a legacy single-pipe system carrying both sewage and stormwater, regulated by the EPA CSO Control Policy through Nine Minimum Controls (NMC) and Long-Term Control Plans (LTCPs) .
Protecting public health and receiving waters from raw sewage discharges is the core regulatory objective of wastewater collection system management. Operators must understand the legal definitions, root causes, regulatory frameworks, and operational controls governing SSOs and CSOs under the National Pollutant Discharge Elimination System (NPDES).
1. Sanitary Sewer Overflows (SSOs): Definition & Legal Framework
An SSO is defined as any unpermitted discharge of raw or partially treated wastewater from a sanitary sewer collection system before reaching the headworks of a wastewater treatment facility. SSOs can occur at manholes, cleanouts, lift stations, force mains, or directly into customer buildings (basement backups). +-------------------------------------------------------------------------+
- | SSO REGULATORY JURISDICTION |
- +-------------------------------------------------------------------------+
- | Clean Water Act (CWA) Section 301 / 402 (NPDES Program) |
- | |
- | - Separate sanitary sewers are NOT permitted to discharge raw sewage. |
- | - EVERY SSO is an unpermitted discharge and a prima facie CWA violation|
- | - Strict Liability: Violations apply regardless of fault or intent. |
- | - Enforcement: Administrative orders, civil penalties (>$50,000/day), |
- | mandatory federal consent decrees, and criminal prosecution for |
- | willful failure to report or mitigate. |
- +-------------------------------------------------------------------------+
To ensure proactive system management and prevent SSOs, the EPA established the Capacity, Management, Operation, and Maintenance (CMOM) program framework. CMOM requires utilities to systematically assess system capacity, conduct preventive cleaning, repair structural defects, and maintain emergency response readiness.
2. Primary Root Causes of SSOs
SSOs are categorized into dry-weather overflows (typically operational or structural failures) and wet-weather overflows (typically hydraulic capacity failures). SSO ROOT CAUSES
- |
- +-------------------------------+-------------------------------+
- | |
- v v
- DRY-WEATHER SSOs WET-WEATHER SSOs
- (O&M / Mechanical Failure) (Hydraulic Inundation)
- | |
- FOG Accumulation (45%) - Severe I/I Surcharging
- Root Intrusion (25%) - Lift Station Wet Well Flooding
- Lift Station Power/Pump Failure (15%) - WWTP Headworks Backpressure
- Structural Collapse / Debris (10%) - River Inundation of Lids
- Vandalism / Contractor Damage (5%)
- Dry-Weather Causes
Fats, Oils, and Grease (FOG): The single leading cause of collection system blockages nationwide (~40% to 50%). Hot grease discharged down kitchen drains cools, congeals, and saponifies inside pipes, forming rock-hard obstructions.
Root Intrusion: Tree and shrub roots penetrate loose pipe joints seeking moisture and nutrients, expanding into dense fibrous root masses that trap solids.
Lift Station Mechanical / Electrical Failures: Pump clogging, motor burnouts, blown electrical fuses, power grid outages, failed float switches, or jammed check valves that cause wet wells to overflow.
Structural Collapse: Severe crown corrosion from hydrogen sulfide ( H 2 SO 4 \text{H}_2\text{SO}_4 H 2 SO 4 ) or shear fractures causing the pipe barrel to cave in.
Foreign Debris and Vandalism: Disposable wipes ("flushable" wipes), rags, timber, rocks, and construction debris jammed in the pipe barrel.
Wet-Weather Causes
Excessive RDII: Inflow and infiltration overwhelm the hydraulic carrying capacity of gravity pipes and pumping stations during rainstorms.
Surface Inundation: Floodwaters submerging low-elevation manholes located in floodways and drainage easements.
- 3. Separate Sanitary Sewers vs. Combined Sewer Systems (A) SEPARATE SANITARY SEWER SYSTEM (Modern Standard)
- +--------------------------+ ===> Sanitary Flow ===> [WWTP Treatment]
- | Sanitary Main (Sewage) |
- +--------------------------+
- +--------------------------+ ===> Storm Runoff ===> [River / Lake]
- | Storm Drain (Runoff) |
- +--------------------------+
- (B) COMBINED SEWER SYSTEM (Legacy Urban Systems)
- +-------------------------------------------------------------+
- | Single Combined Sewer Pipe (Sewage + Stormwater Runoff) |
- +------------------------------+------------------------------+
- |
- [DRY WEATHER] | [HEAVY WET WEATHER]
- | | |
- v | v
- (To WWTP Plant) <-----+-----> [OVERFLOW WEIR / CSO OUTLET]
- |
- v
- (Untreated CSO to River)
- Comparison Table
Feature Separate Sanitary Sewer (SSS) Combined Sewer System (CSS)
Piping Network Two distinct, isolated pipe networks (Sanitary & Storm) Single pipe network carrying municipal sewage and stormwater runoff
Dry Weather Flow 100% domestic/commercial wastewater to WWTP 100% wastewater conveyed to WWTP via dry-weather interceptors
Wet Weather Flow Designed to carry sanitary flow only; I/I is unauthorized Storm runoff mixes with sewage; volume exceeds interceptor capacity
Discharge Event Sanitary Sewer Overflow (SSO) Combined Sewer Overflow (CSO)
Regulatory Status Unpermitted violation under CWA Section 301 Permitted discharge under NPDES permit with CSO conditions
- Control Framework CMOM & SSO elimination EPA CSO Policy: Nine Minimum Controls & LTCP
- 4. EPA Combined Sewer Overflow (CSO) Control Policy
Published in 1994 and codified into the Clean Water Act under Section 402(q) in 2000, the EPA CSO Control Policy establishes a national framework for controlling CSOs. It requires communities with combined sewer systems to implement immediate operational practices and develop long-term capital plans.
The Nine Minimum Controls (NMC)
The Nine Minimum Controls are cost-effective operational and maintenance measures that combined sewer utilities are mandated to implement immediately without requiring major capital construction: +-------------------------------------------------------------------------+
- | THE NINE MINIMUM CONTROLS (NMC) |
- +-----+-------------------------------------------------------------------+
- | 1 | Proper operation and regular maintenance programs for CSS & CSOs |
- | 2 | Maximum use of the collection system for wet-weather storage |
- | 3 | Review and modification of pretreatment programs (minimize impact)|
- | 4 | Maximization of flow to the POTW (Publicly Owned Treatment Works) |
- | 5 | Elimination of CSOs during dry-weather periods (Dry-weather CSOs |
- | | are strictly prohibited) |
- | 6 | Control of solid and floatable materials in CSOs (screens/booms) |
- | 7 | Pollution prevention programs (street sweeping, public education) |
- | 8 | Public notification of CSO occurrences and impacted water bodies |
- | 9 | Monitoring to effectively characterize CSO impacts and controls |
- +-----+-------------------------------------------------------------------+
- Long-Term Control Plans (LTCPs)
In addition to the Nine Minimum Controls, combined sewer communities must develop and execute a comprehensive Long-Term Control Plan (LTCP) . LTCPs are multi-year, multi-million dollar capital improvement programs designed to bring CSO discharges into compliance with state water quality standards. LTCP ENGINEERING STRATEGIES
- |
- +--------------------------+--------------------------+
- | | |
- v v v
- [Sewer Separation] [Deep Rock Storage Tunnels] [High-Rate Treatment]
- Complete segregation Massive underground tunnels Dedicated satellite
- of sanitary & storm holding wet-weather surges facilities with vortex
- piping systems until WWTP capacity frees up separators & disinfection
- 5. Dry-Weather CSO Prohibition
A critical rule tested on operator exams is the absolute prohibition of dry-weather CSOs . A combined sewer outfall is only legally permitted to discharge during bona fide precipitation or snowmelt events when runoff physically exceeds hydraulic capacity. If a CSO regulator discharges during dry weather (due to a clogged downstream orifice, silt buildup, or malfunctioning weir gate), it is an illegal, unpermitted discharge subject to immediate enforcement action.