Study guide

9.2 Wastewater Characteristics & Abnormal Discharge Identification

ABC Wastewater Collection Operator Class I Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Gravity Sewers, System Components & Materials

1.1 Gravity Sewer Principles & System Layout 1.2 Sewer Pipe Materials, Sizing & Joining Methods 1.3 Manholes, Drop Structures & Appurtenances 1.4 Gravity Sewer Hydraulics, Slope & Scour Velocity

2 Chapter 2: Lift Stations, Pumping Systems & Force Mains

2.1 Lift Station Design: Wet Well vs Dry Well Systems 2.2 Wastewater Pumps & Operating Principles 2.3 Level Controls, Pump Sequencing & SCADA Telemetry 2.4 Force Mains, Valves & Surge Protection 2.5 Lift Station Emergency Power, Maintenance & Operation

3 Chapter 3: Sewer Inspection, Testing & Cleaning

3.1 Hydraulic Jetting & High-Velocity Cleaning 3.2 Mechanical Rodding, Bucketing & Clearing Methods 3.3 Closed-Circuit Television (CCTV) Inspection & NASSCO PACP 3.4 Sewer Testing Methods: Smoke, Dye & Acoustic 3.5 Root, Grease & Debris Management

4 Chapter 4: Inflow & Infiltration (I/I), SSOs & FOG Management

4.1 Inflow vs Infiltration Fundamentals & RDII 4.2 Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs) 4.3 SSO Emergency Response, Containment & NPDES Reporting 4.4 Fats, Oils, and Grease (FOG) Control Programs 4.5 Sewer System Rehabilitation & Trenchless Methods

5 Chapter 5: Safety, Confined Space Entry & Environmental Hazards

5.1 OSHA 1910.146 Permit-Required Confined Space Standards 5.2 Atmospheric Testing, Monitoring & Calibration Sequence 5.3 Ventilation, PPE & Emergency Rescue Equipment 5.4 Hydrogen Sulfide (H2S), Toxic Gases & Crown Corrosion 5.5 Trenching, Excavation & Traffic Safety (MUTCD & 811)

6 Chapter 6: Operator Math, Hydraulics & System Administration

6.1 Flow, Velocity & Cross-Sectional Area Calculations 6.2 Lift Station Hydraulics, Pumping Rate & Drawdown Math 6.3 Sewer Slope, Invert Elevations & Grade Calculations 6.4 Chemical Dosing, Feed Rate & Quantity Calculations 6.5 Regulatory Framework, Recordkeeping & System Mapping

7 Chapter 7: Equipment Operation, Tools & Preventive Maintenance

7.1 Gas Detectors, Flow Meters & Blowers: Operation and Calibration 7.2 Balling, Flushing, Poly Pigs & Cleaning-Method Selection 7.3 Heavy Equipment, Excavation & Hydro Excavation 7.4 Electrical Equipment: VFDs, Motor Control Centers & Low-Voltage Devices 7.5 Preventive Maintenance Programs, SOP/OEM Compliance & Support Tools

8 Chapter 8: System Restoration, Mapping & Emergency Operations

8.1 Manhole, Tap & Lateral Rehabilitation and Exfiltration Control 8.2 Appurtenance Inspection: Air Release Valves, Siphons, Regulators & Outfalls 8.3 Blueprints, GIS, Asset Management & System Mapping 8.4 Emergency Bypass Pumping & System Failure Response 8.5 New Pipe Installation Inspection & Acceptance Testing

9 Chapter 9: Monitoring, Safety Programs & System Administration

9.1 Flow Monitoring, Flow Meters & Sensor Calibration 9.2 Wastewater Characteristics & Abnormal Discharge Identification 9.3 Chemical Handling, Inventory, Feed Systems & Spill Response 9.4 Electrical Safety, Lockout/Tagout, Fire Safety & Occupational Health 9.5 Customer Service, Safety Programs, Operator Training & Regulatory Administration

9.2 Wastewater Characteristics & Abnormal Discharge Identification

Key Takeaways Explain This Topic AI

Fresh domestic wastewater is gray-brown with a musty odor; black wastewater with a rotten-egg odor indicates septic conditions and sulfide generation.

Federal pretreatment rules prohibit discharges with a closed-cup flash point below 140 degrees Fahrenheit and discharges with a pH below 5.0.

A petroleum odor or sheen in a manhole is an explosion hazard requiring immediate LEL monitoring, evacuation of the area, and notification.

Illicit discharges are traced by working upstream manhole by manhole until the contamination disappears, isolating the contributing reach.

Last updated: September 2026

9.2 Wastewater Characteristics & Abnormal Discharge Identification

Exam Focus: Identify physical and/or abnormal characteristics of the wastewater sits in the Monitoring, Evaluation, and Adjustment content area, and ensure compliance of discharge limits… with all applicable local, state, and federal regulations sits in Security, Safety, and Administrative Procedures. In practice they are the same skill: recognize what does not belong and act on it.

Normal Domestic Wastewater

  • Characteristic Fresh domestic wastewater Septic (stale) wastewater
  • Color Gray to gray-brown Black
  • Odor Musty, earthy, slightly disagreeable Rotten eggs (H₂S)
  • Dissolved oxygen Present, though low Zero
  • Sulfide Low Elevated
  • Temperature Roughly 50–75 °F, warmer than groundwater Same
  • pH Roughly 6.5–8.0 May drop as acids form

The color and odor shift from gray to black and from musty to rotten-egg is the single most useful field observation an operator makes. It means dissolved oxygen has been exhausted, sulfate-reducing bacteria are active, and hydrogen sulfide is being generated — the precursor to odor complaints, crown corrosion, and an atmospheric hazard. Its usual causes are excessive detention time in a force main or wet well, low velocity and deposition in a flat gravity line, or a high-strength industrial load.

Abnormal Characteristics and What They Suggest

  • Observation Likely source Operator concern
  • Milky white Latex paint, dairy processing, concrete washout High-strength load; solids and pH

Vivid red, blue, green Dye works, printing, industrial process, or a dye test in progress Illicit discharge or uncoordinated testing

Petroleum sheen or gasoline odor Fuel release, service station, illegal dumping Explosion hazard — the highest-priority abnormal condition

Heavy white or persistent foam Surfactants, detergent discharge Interferes with treatment and with visual inspection

Very low pH, corroded concrete Acid discharge — plating, food processing, battery Attacks concrete and metal; hazardous to entrants

Very high temperature, steam Boiler blowdown, laundry, food processing Accelerates sulfide generation; can deform plastic pipe

  • Blood, tissue, unusual solids Slaughterhouse, medical facility Pathogen and BOD loading
  • Solvent odor Degreasing operation Toxic and potentially flammable vapors
  • The Petroleum Case Deserves Emphasis

Gasoline vapor in a sewer produces an explosive atmosphere throughout a connected reach, and manhole explosions have killed operators and members of the public. The response is not investigation first:

Do not enter. Do not introduce any ignition source — no engines, no non-intrinsically-safe equipment, no smoking.

Monitor LEL from the surface and evacuate the immediate area if readings are significant.

Notify the fire department, the utility's emergency contact, and the regulator.

Ventilate and trace the source upstream only once it is safe.

Federal Prohibited Discharge Standards

The EPA General Pretreatment Regulations (40 CFR Part 403) establish prohibitions that apply to every user of a publicly owned treatment works, whether or not a local ordinance repeats them. No user may introduce:

Fire or explosion hazards , including any stream with a closed-cup flash point below 140 °F (60 °C) .

Corrosive material , and in no case a discharge with pH lower than 5.0 unless the works is specifically designed for it.

Solid or viscous pollutants in amounts that obstruct flow or interfere with operation.

Slug loads — any pollutant, including oxygen-demanding load, released at a flow rate or concentration that interferes with the works.

Heat sufficient to inhibit biological treatment, and in no case heat that raises the treatment plant influent above 104 °F (40 °C) .

Petroleum oil, non-biodegradable cutting oil, or mineral oil in amounts causing interference or pass-through.

Pollutants releasing toxic gases, vapors, or fumes in quantities that may cause acute worker health and safety problems.

Trucked or hauled pollutants , except at discharge points designated by the works.

Beyond these federal prohibitions, the utility sets local limits derived from its own plant capacity, its sludge disposal method, and its receiving water. Significant industrial users hold individual discharge permits with numeric limits, sampling requirements, and self-monitoring reports.

Tracing an Illicit Discharge

When abnormal wastewater appears, the tracing method is systematic and works upstream:

Document first. Photograph, note the time, and record the observed characteristics. Discharges are often intermittent, so if it is not documented when observed it may not be reproducible.

Sample where the discharge is observed, following chain-of-custody if enforcement is possible.

Work upstream manhole by manhole. The contamination is present at every manhole below the source and absent above it. The reach where it disappears contains the source.

Narrow to the contributing connections. Within that reach, identify the service laterals and check each — dye testing individual connections is the standard confirmation.

Consider timing. Batch discharges follow production or shift schedules; a site that is clean at 10 a.m. may discharge at shift end. Continuous or automatic samplers capture what spot checks miss.

Refer to pretreatment staff for enforcement, and document the entire chain of observations.

The operator's role is observation, documentation, immediate safety action, and notification. Enforcement is the pretreatment program's job, but it can only act on what the field crew reports.