Study guide
6.4 Chemical Dosing, Feed Rate & Quantity Calculations
ABC Wastewater Collection Operator Class I Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Gravity Sewers, System Components & Materials
1.1 Gravity Sewer Principles & System Layout 1.2 Sewer Pipe Materials, Sizing & Joining Methods 1.3 Manholes, Drop Structures & Appurtenances 1.4 Gravity Sewer Hydraulics, Slope & Scour Velocity
2 Chapter 2: Lift Stations, Pumping Systems & Force Mains
2.1 Lift Station Design: Wet Well vs Dry Well Systems 2.2 Wastewater Pumps & Operating Principles 2.3 Level Controls, Pump Sequencing & SCADA Telemetry 2.4 Force Mains, Valves & Surge Protection 2.5 Lift Station Emergency Power, Maintenance & Operation
3 Chapter 3: Sewer Inspection, Testing & Cleaning
3.1 Hydraulic Jetting & High-Velocity Cleaning 3.2 Mechanical Rodding, Bucketing & Clearing Methods 3.3 Closed-Circuit Television (CCTV) Inspection & NASSCO PACP 3.4 Sewer Testing Methods: Smoke, Dye & Acoustic 3.5 Root, Grease & Debris Management
4 Chapter 4: Inflow & Infiltration (I/I), SSOs & FOG Management
4.1 Inflow vs Infiltration Fundamentals & RDII 4.2 Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs) 4.3 SSO Emergency Response, Containment & NPDES Reporting 4.4 Fats, Oils, and Grease (FOG) Control Programs 4.5 Sewer System Rehabilitation & Trenchless Methods
5 Chapter 5: Safety, Confined Space Entry & Environmental Hazards
5.1 OSHA 1910.146 Permit-Required Confined Space Standards 5.2 Atmospheric Testing, Monitoring & Calibration Sequence 5.3 Ventilation, PPE & Emergency Rescue Equipment 5.4 Hydrogen Sulfide (H2S), Toxic Gases & Crown Corrosion 5.5 Trenching, Excavation & Traffic Safety (MUTCD & 811)
6 Chapter 6: Operator Math, Hydraulics & System Administration
6.1 Flow, Velocity & Cross-Sectional Area Calculations 6.2 Lift Station Hydraulics, Pumping Rate & Drawdown Math 6.3 Sewer Slope, Invert Elevations & Grade Calculations 6.4 Chemical Dosing, Feed Rate & Quantity Calculations 6.5 Regulatory Framework, Recordkeeping & System Mapping
7 Chapter 7: Equipment Operation, Tools & Preventive Maintenance
7.1 Gas Detectors, Flow Meters & Blowers: Operation and Calibration 7.2 Balling, Flushing, Poly Pigs & Cleaning-Method Selection 7.3 Heavy Equipment, Excavation & Hydro Excavation 7.4 Electrical Equipment: VFDs, Motor Control Centers & Low-Voltage Devices 7.5 Preventive Maintenance Programs, SOP/OEM Compliance & Support Tools
8 Chapter 8: System Restoration, Mapping & Emergency Operations
8.1 Manhole, Tap & Lateral Rehabilitation and Exfiltration Control 8.2 Appurtenance Inspection: Air Release Valves, Siphons, Regulators & Outfalls 8.3 Blueprints, GIS, Asset Management & System Mapping 8.4 Emergency Bypass Pumping & System Failure Response 8.5 New Pipe Installation Inspection & Acceptance Testing
9 Chapter 9: Monitoring, Safety Programs & System Administration
9.1 Flow Monitoring, Flow Meters & Sensor Calibration 9.2 Wastewater Characteristics & Abnormal Discharge Identification 9.3 Chemical Handling, Inventory, Feed Systems & Spill Response 9.4 Electrical Safety, Lockout/Tagout, Fire Safety & Occupational Health 9.5 Customer Service, Safety Programs, Operator Training & Regulatory Administration
6.4 Chemical Dosing, Feed Rate & Quantity Calculations
Key Takeaways Explain This Topic AI
The universal pounds formula determines daily chemical mass requirements: lbs/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal.
When dosing liquid chemical solutions, calculations must account for the specific gravity (SG) and percent active strength of the bulk product: lbs active/gal = 8.34 × SG × (% Active Strength / 100).
Liquid chemical volumetric feed rate in gallons per day is calculated as: Feed Rate (gal/day) = (Flow in MGD × Dosage in mg/L) / (SG × (% Active Strength / 100)).
Chemical metering pump calibration converts volumetric daily feed into laboratory flow units: mL/min = (gal/day × 3,785.4 mL/gal) / 1,440 min/day = gal/day × 2.6288.
Last updated: September 2026
6.4 Chemical Dosing, Feed Rate & Quantity Calculations
Exam Focus: Collection operators must master the universal pounds formula (lbs/day = MGD × mg/L × 8.34), adjust calculations for liquid chemical specific gravity (SG) and percent concentration, and compute metering pump calibration rates in gallons per day (gpd) and milliliters per minute (mL/min).
The Universal Pounds Formula
The most widely used mathematical relationship in wastewater treatment and collection system chemical dosing is the pounds formula . This formula calculates the total weight of pure chemical required per day based on wastewater flow volume and target chemical dosage. lbs/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal \mathbf{\text{lbs/day} = \text{Flow (MGD)} \times \text{Dosage (mg/L)} \times 8.34\text{ lbs/gal}} lbs/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal THE POUNDS FORMULA TRIANGLE
- [ lbs/day ]
- +-------------+
- | Flow | Dose |
- | (MGD)|(mg/L)| × 8.34
- +-------------+
- To solve for lbs/day: lbs/day = MGD × mg/L × 8.34
- To solve for Dosage: Dosage (mg/L) = (lbs/day) / (MGD × 8.34)
- To solve for Flow: Flow (MGD) = (lbs/day) / (Dosage × 8.34)
- Why the 8.34 lbs/gal Constant Works
1 gallon of water = 8.34 pounds.
1 milligram per liter (mg/L) = 1 part per million (ppm) by weight in water.
Therefore, 1 mg/L in 1.0 Million Gallons (MG) of water equals: 1.0 MG × 8.34 lbs/gal × 1 lb 1,000,000 lbs = 8.34 pounds 1.0\text{ MG} \times 8.34\text{ lbs/gal} \times \frac{1\text{ lb}}{1{,}000{,}000\text{ lbs}} = \mathbf{8.34\text{ pounds}} 1.0 MG × 8.34 lbs/gal × 1 , 000 , 000 lbs 1 lb = 8.34 pounds
Liquid Chemical Dosing Adjustments
Chemicals utilized in collection systems (e.g., ferric chloride, calcium nitrate, sodium hypochlorite, sodium hydroxide) are supplied as liquid solutions rather than 100 percent pure dry powders. Liquid calculations require two adjustments:
Specific Gravity (SG): The ratio of the solution's density compared to pure water (1.00). Weight of 1 Gallon of Chemical Solution = 8.34 lbs/gal × SG \text{Weight of 1 Gallon of Chemical Solution} = 8.34\text{ lbs/gal} \times \text{SG} Weight of 1 Gallon of Chemical Solution = 8.34 lbs/gal × SG
Percent Active Strength (Percent Concentration): The fraction of total solution weight that is active chemical ingredient. Pounds of Active Chemical per Gallon = 8.34 × SG × ( Percent Active Strength 100 ) \mathbf{\text{Pounds of Active Chemical per Gallon} = 8.34 \times \text{SG} \times \left(\frac{\text{Percent Active Strength}}{100}\right)} Pounds of Active Chemical per Gallon = 8.34 × SG × ( 100 Percent Active Strength ) LIQUID CHEMICAL BULK WEIGHT DERIVATION
- Pure Water (SG = 1.0) Bulk Chemical Solution (e.g., FeCl3)
- +--------------------+ +--------------------+
- | Density = 8.34 | | Specific Gravity = 1.42 |
- | lbs per gallon | | Total Weight = 1.42 × 8.34 |
- | | | = 11.84 lbs/gallon |
- | | | Active Strength = 40% FeCl3 |
- | | | Active lbs/gal = 11.84 × 0.40 |
- | | | = 4.74 lbs/gal |
- +--------------------+ +--------------------+
- Liquid Feed Rate Formulas
Daily Volume Feed Rate (gal/day): Feed Rate (gal/day) = Required lbs/day of Active Chemical Pounds of Active Chemical per Gallon = Flow (MGD) × Dosage (mg/L) SG × ( Percent Active Strength 100 ) \mathbf{\text{Feed Rate (gal/day)} = \frac{\text{Required lbs/day of Active Chemical}}{\text{Pounds of Active Chemical per Gallon}} = \frac{\text{Flow (MGD)} \times \text{Dosage (mg/L)}}{\text{SG} \times \left(\frac{\text{Percent Active Strength}}{100}\right)}} Feed Rate (gal/day) = Pounds of Active Chemical per Gallon Required lbs/day of Active Chemical = SG × ( 100 Percent Active Strength ) Flow (MGD) × Dosage (mg/L)
Feed Rate in Gallons per Minute (gpm): Feed Rate (gpm) = Feed Rate (gal/day) 1,440 min/day \text{Feed Rate (gpm)} = \frac{\text{Feed Rate (gal/day)}}{1{,}440\text{ min/day}} Feed Rate (gpm) = 1 , 440 min/day Feed Rate (gal/day)
Feed Rate in Milliliters per Minute (mL/min): Feed Rate (mL/min) = Feed Rate (gal/day) × 3,785.4 mL/gal 1,440 min/day = Feed Rate (gal/day) × 2.6288 \mathbf{\text{Feed Rate (mL/min)} = \frac{\text{Feed Rate (gal/day)} \times 3{,}785.4\text{ mL/gal}}{1{,}440\text{ min/day}} = \text{Feed Rate (gal/day)} \times 2.6288} Feed Rate (mL/min) = 1 , 440 min/day Feed Rate (gal/day) × 3 , 785.4 mL/gal = Feed Rate (gal/day) × 2.6288
Collection System Chemical Application Summary
Chemical Name Chemical Formula Primary Collection Application Typical SG Typical Purity Mechanism of Action
Ferric Chloride FeCl 3 \text{FeCl}_3 FeCl 3 Dissolved Sulfide ( H 2 S H_2S H 2 S ) Precipitation 1.38–1.45 35%–42% Fe 3 + \text{Fe}^{3+} Fe 3 + reacts with dissolved sulfide ( S 2 − S^{2-} S 2 − ) to precipitate insoluble iron sulfide (FeS), preventing gas stripping.
Calcium Nitrate Ca(NO 3 ) 2 \text{Ca(NO}_3\text{)}_2 Ca(NO 3 ) 2 (Bioxide®) Biochemical Sulfide Prevention 1.40–1.50 45%–50% Provides nitrate-oxygen; facultative bacteria utilize nitrate rather than sulfate, preventing sulfate-reducing bacteria (SRB) activity.
Sodium Hypochlorite NaOCl \text{NaOCl} NaOCl Chemical Oxidation of H 2 S H_2S H 2 S & Disinfection 1.15–1.25 10%–15% Rapidly oxidizes aqueous hydrogen sulfide and mercaptans into sulfate ( SO 4 2 − \text{SO}_4^{2-} SO 4 2 − ).
Sodium Hydroxide (Caustic) NaOH \text{NaOH} NaOH pH Elevation for Odor Control 1.50–1.53 50% Elevating wastewater pH > 9.0 \text{pH} > 9.0 pH > 9.0 converts volatile H 2 S H_2S H 2 S gas into non-volatile hydrosulfide ( H S − HS^- H S − ) ions.
Metering Pump Calibration Tubes
To verify that a positive displacement chemical metering pump is delivering the exact specified dosage, operators perform a drawdown tube calibration test . CHEMICAL CALIBRATION CYLINDER
- [ Graduated Cylinder ]
- | 1000 mL |
- | 800 mL | 1. Isolate bulk tank
- | 600 mL | 2. Run pump for 60 seconds
- | 400 mL | 3. Measure mL consumed
- | 200 mL | 4. Compare: Observed mL/min
- +----------------------+ vs. Calculated mL/min
- |
v (To Metering Pump Suction) Target Flow (mL/min) = Feed Rate (gal/day) × 2.6288 \text{Target Flow (mL/min)} = \text{Feed Rate (gal/day)} \times 2.6288 Target Flow (mL/min) = Feed Rate (gal/day) × 2.6288
- Step-by-Step Worked Dosing Problems
- Problem 1: Basic Pounds Formula (Oxidizer Dosing)
Question: A wastewater utility doses an interceptor main flowing at 2.40 MGD with an odor control chemical at a target dosage of 15.0 mg/L. How many pounds of chemical are consumed per day?
Step 1: Apply pounds formula: lbs/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal \text{lbs/day} = \text{Flow (MGD)} \times \text{Dosage (mg/L)} \times 8.34\text{ lbs/gal} lbs/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal lbs/day = 2.40 MGD × 15.0 mg/L × 8.34 = 300.24 lbs/day ≈ 300.2 lbs/day \text{lbs/day} = 2.40\text{ MGD} \times 15.0\text{ mg/L} \times 8.34 = \mathbf{300.24\text{ lbs/day}} \approx \mathbf{300.2\text{ lbs/day}} lbs/day = 2.40 MGD × 15.0 mg/L × 8.34 = 300.24 lbs/day ≈ 300.2 lbs/day
Problem 2: Liquid Chemical Feed Rate (Ferric Chloride)
Question: A collection system must feed 450.0 lbs/day of pure ferric chloride ( FeCl 3 \text{FeCl}_3 FeCl 3 ) to precipitate sulfides in a trunk sewer. The bulk ferric chloride liquid solution has a Specific Gravity of 1.40 and contains 38.0 percent active FeCl 3 \text{FeCl}_3 FeCl 3 by weight. Calculate the liquid chemical feed rate in gallons per day (gal/day).
Step 1: Calculate total weight of one gallon of bulk solution: Total Weight per Gallon = 8.34 lbs/gal × 1.40 SG = 11.676 lbs/gal \text{Total Weight per Gallon} = 8.34\text{ lbs/gal} \times 1.40\text{ SG} = 11.676\text{ lbs/gal} Total Weight per Gallon = 8.34 lbs/gal × 1.40 SG = 11.676 lbs/gal
Step 2: Calculate pounds of active chemical per gallon: Active lbs/gal = 11.676 lbs/gal × 0.380 = 4.4369 lbs active/gal \text{Active lbs/gal} = 11.676\text{ lbs/gal} \times 0.380 = 4.4369\text{ lbs active/gal} Active lbs/gal = 11.676 lbs/gal × 0.380 = 4.4369 lbs active/gal
Step 3: Calculate required gallons per day: Feed Rate (gal/day) = 450.0 lbs/day 4.4369 lbs active/gal = 101.4 gal/day \text{Feed Rate (gal/day)} = \frac{450.0\text{ lbs/day}}{4.4369\text{ lbs active/gal}} = \mathbf{101.4\text{ gal/day}} Feed Rate (gal/day) = 4.4369 lbs active/gal 450.0 lbs/day = 101.4 gal/day
Problem 3: Calibration Tube Flow Rate in mL/min
Question: A metering pump feeding calcium nitrate solution is set to deliver 72.0 gallons per day. During a 1.0-minute calibration cylinder test, how many milliliters (mL) of chemical should be drawn down by the pump?
Step 1: Convert daily gallons to daily milliliters: mL/day = 72.0 gal/day × 3,785.4 mL/gal = 272,548.8 mL/day \text{mL/day} = 72.0\text{ gal/day} \times 3{,}785.4\text{ mL/gal} = 272{,}548.8\text{ mL/day} mL/day = 72.0 gal/day × 3 , 785.4 mL/gal = 272 , 548.8 mL/day
Step 2: Convert to milliliters per minute: mL/min = 272,548.8 mL/day 1,440 min/day = 189.3 mL/min \text{mL/min} = \frac{272{,}548.8\text{ mL/day}}{1{,}440\text{ min/day}} = \mathbf{189.3\text{ mL/min}} mL/min = 1 , 440 min/day 272 , 548.8 mL/day = 189.3 mL/min
Direct Shortcut (72.0 gal/day × 2.6288 = 189.3 mL/min): Confirmed.