Study guide

3.3 Closed-Circuit Television (CCTV) Inspection & NASSCO PACP

ABC Wastewater Collection Operator Class I Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Gravity Sewers, System Components & Materials

1.1 Gravity Sewer Principles & System Layout 1.2 Sewer Pipe Materials, Sizing & Joining Methods 1.3 Manholes, Drop Structures & Appurtenances 1.4 Gravity Sewer Hydraulics, Slope & Scour Velocity

2 Chapter 2: Lift Stations, Pumping Systems & Force Mains

2.1 Lift Station Design: Wet Well vs Dry Well Systems 2.2 Wastewater Pumps & Operating Principles 2.3 Level Controls, Pump Sequencing & SCADA Telemetry 2.4 Force Mains, Valves & Surge Protection 2.5 Lift Station Emergency Power, Maintenance & Operation

3 Chapter 3: Sewer Inspection, Testing & Cleaning

3.1 Hydraulic Jetting & High-Velocity Cleaning 3.2 Mechanical Rodding, Bucketing & Clearing Methods 3.3 Closed-Circuit Television (CCTV) Inspection & NASSCO PACP 3.4 Sewer Testing Methods: Smoke, Dye & Acoustic 3.5 Root, Grease & Debris Management

4 Chapter 4: Inflow & Infiltration (I/I), SSOs & FOG Management

4.1 Inflow vs Infiltration Fundamentals & RDII 4.2 Sanitary Sewer Overflows (SSOs) & Combined Sewer Overflows (CSOs) 4.3 SSO Emergency Response, Containment & NPDES Reporting 4.4 Fats, Oils, and Grease (FOG) Control Programs 4.5 Sewer System Rehabilitation & Trenchless Methods

5 Chapter 5: Safety, Confined Space Entry & Environmental Hazards

5.1 OSHA 1910.146 Permit-Required Confined Space Standards 5.2 Atmospheric Testing, Monitoring & Calibration Sequence 5.3 Ventilation, PPE & Emergency Rescue Equipment 5.4 Hydrogen Sulfide (H2S), Toxic Gases & Crown Corrosion 5.5 Trenching, Excavation & Traffic Safety (MUTCD & 811)

6 Chapter 6: Operator Math, Hydraulics & System Administration

6.1 Flow, Velocity & Cross-Sectional Area Calculations 6.2 Lift Station Hydraulics, Pumping Rate & Drawdown Math 6.3 Sewer Slope, Invert Elevations & Grade Calculations 6.4 Chemical Dosing, Feed Rate & Quantity Calculations 6.5 Regulatory Framework, Recordkeeping & System Mapping

7 Chapter 7: Equipment Operation, Tools & Preventive Maintenance

7.1 Gas Detectors, Flow Meters & Blowers: Operation and Calibration 7.2 Balling, Flushing, Poly Pigs & Cleaning-Method Selection 7.3 Heavy Equipment, Excavation & Hydro Excavation 7.4 Electrical Equipment: VFDs, Motor Control Centers & Low-Voltage Devices 7.5 Preventive Maintenance Programs, SOP/OEM Compliance & Support Tools

8 Chapter 8: System Restoration, Mapping & Emergency Operations

8.1 Manhole, Tap & Lateral Rehabilitation and Exfiltration Control 8.2 Appurtenance Inspection: Air Release Valves, Siphons, Regulators & Outfalls 8.3 Blueprints, GIS, Asset Management & System Mapping 8.4 Emergency Bypass Pumping & System Failure Response 8.5 New Pipe Installation Inspection & Acceptance Testing

9 Chapter 9: Monitoring, Safety Programs & System Administration

9.1 Flow Monitoring, Flow Meters & Sensor Calibration 9.2 Wastewater Characteristics & Abnormal Discharge Identification 9.3 Chemical Handling, Inventory, Feed Systems & Spill Response 9.4 Electrical Safety, Lockout/Tagout, Fire Safety & Occupational Health 9.5 Customer Service, Safety Programs, Operator Training & Regulatory Administration

3.3 Closed-Circuit Television (CCTV) Inspection & NASSCO PACP

Key Takeaways Explain This Topic AI

CCTV inspection utilizes remote-controlled robotic crawlers equipped with pan-tilt-zoom cameras to perform detailed internal visual assessments of sewer mains.

The National Association of Sewer Service Companies (NASSCO) Pipeline Assessment Certification Program (PACP) provides the North American industry standard for sewer defect coding.

PACP categorizes all pipeline defects into Structural (cracks, fractures, holes, deformation) and Operational & Maintenance (O&M - roots, grease, deposits, infiltration).

PACP severity grades range from Grade 1 (minor/superficial) to Grade 5 (severe structural defect or imminent collapse condition).

Last updated: September 2026

Closed-Circuit Television (CCTV) Inspection & NASSCO PACP

Quick Answer: CCTV pipeline inspection uses robotic crawlers with 360° pan-and-tilt cameras to visually inspect and log sewer conditions. The NASSCO PACP (Pipeline Assessment Certification Program) standardizes defect documentation into Structural and Operational/Maintenance (O&M) categories across a Grade 1 to 5 severity scale , ensuring consistent data for asset management and rehabilitation planning.

Closed-Circuit Television (CCTV) inspection is the cornerstone of proactive collection system condition assessment, asset management, and infiltration/inflow (I/I) detection. Certified collection operators must be thoroughly familiar with CCTV equipment operation, standard inspection protocols, and NASSCO PACP defect coding conventions.

1. CCTV Equipment Architecture

A modern CCTV inspection unit is typically housed in a dedicated step-van or trailer containing a climate-controlled operator studio and a rear equipment bay: CCTV ROBOTIC CRAWLER SYSTEM

  • +-----------------------------------------------------------+
  • | [Video Monitor & PACP Data Console] (Studio) |
  • +-----------------------------+-----------------------------+
  • | Calibrated Cable (Tether)
  • v
  • +--------------------------------+
  • | Digital Distance Cable Reel |
  • +----------------+---------------+
  • |
  • v
  • (Downstream Manhole)
  • |
  • ==================+==================
  • | |
  • | [Pan-and-Tilt Camera Head] |
  • | //====\\ |
  • | [LEDs]( (O) )[LEDs] |
  • | \\====// |
  • | +------------------+ |
  • Pipe Crown | | Robotic Crawler | | Pipe Crown
  • ------------+-------+------------------+--------+-------------
  • Pipe Invert | (O) (O) | Pipe Invert
  • ===============================================================
  • <=== Crawler Advances Upstream (Max 30 ft/min) ===
  • Primary Components

Robotic Transporter (Crawler): Steerable, multi-wheel or tracked all-wheel drive crawler capable of navigating pipes from 6" to 48"+ diameter. Wheel sizes and weights are adjusted to match pipe material and water depth.

Pan-and-Tilt Camera Head: Features 360° continuous pan rotation and 270° optical tilt with high-intensity LED lighting arrays. It allows perpendicular (90°) viewing of pipe joints, lateral service taps, and localized defects.

Cable Reel & Calibrated Encoder: Armored multi-conductor cable transmitting video signals, crawler control commands, and power. A digital distance encoder continuously logs travel footage (chainage) with an accuracy of ± 1 % \pm 1\% ± 1% .

Data Acquisition Software: Specialized PACP-compliant logging software that overlays continuous chainage footage, pipe diameter, material, date, manhole IDs, and defect codes directly onto the recorded digital video (MP4).

2. Standard Operating Procedures (SOP) for CCTV

To ensure legally defensible and technically accurate data, operators follow standardized inspection protocols:

Pre-Cleaning Requirement: Pipes should generally be cleaned with a hydro-jetter prior to CCTV inspection so that settled silt and grease rings do not obscure structural cracks or invert defects. (Exception: dedicated pre-cleaning surveys to assess grease/grit loading).

Speed Limit: NASSCO PACP standards mandate that camera travel speed must never exceed 30 feet per minute (0.5 ft/sec) during continuous travel.

Lateral & Joint Inspections: The camera must stop at every service lateral connection, pan 90° into the lateral tap, and record clock position (e.g., 10:00 or 02:00), connection type (factory tee, saddle, break-in tap), and structural condition.

Footage Calibration: The footage counter must be zeroed precisely at the center point or interior face of the starting manhole and verified at the terminal manhole face.

3. NASSCO PACP Defect Classification

The National Association of Sewer Service Companies (NASSCO) developed the Pipeline Assessment Certification Program (PACP) to eliminate subjective terminology (e.g., "bad crack" or "dirty pipe") by providing standardized four-letter alpha codes, severity modifiers, and clock-position references.

PACP divides all pipeline observations into two primary classifications: +-------------------------------------------------------------------------+

  • | NASSCO PACP DEFECT CLASSIFICATIONS |
  • +------------------------------------+------------------------------------+
  • | 1. STRUCTURAL DEFECTS | 2. OPERATIONAL & MAINTENANCE (O&M) |
  • | (Affects physical pipe integrity) | (Affects flow capacity / hydraulic)|
  • +------------------------------------+------------------------------------+
  • | • Cracks (Longitudinal, Circ., M) | • Root Intrusion (Fine, Med, Mass) |
  • | • Fractures (Circumferential, M) | • Grease Accumulation (Attached) |
  • | • Broken Pipe / Missing Wall/ Hole | • Settled Deposits (Grit, Rocks) |
  • | • Deformed / Deflected Pipe (>5%) | • Encrustations (Mineral, Scale) |
  • | • Joint Separation / Offset Joint | • Infiltration (Drip, Run, Gusher) |
  • | • Collapsed Pipe | • Obstructions (Intrusive Laterals)|
  • +------------------------------------+------------------------------------+ CLOCK-POSITION DEFECT NOTATION
  • 12:00 (Crown)
  • |
  • 10:00 | 02:00
  • (Service Tap) | (Service Tap)
  • \ | /
  • \ | /
  • 09:00 (Springline) -----+----- 03:00 (Springline)
  • / \
  • / \
  • / \
  • |
  • 06:00 (Invert)
  • 4. PACP Severity Grading Scale (1 to 5)

PACP assigns a numerical severity score from 1 to 5 to every identified defect based on the risk of structural failure or hydraulic blockage:

  • PACP Grade Severity Description Structural Defect Example O&M Defect Example
  • Grade 1 Minor / Superficial Hairline surface crack; light crazing Light slime coat; fine roots at single joint

Grade 2 Minor to Moderate Medium crack; minor spalling; joint gap <0.5" Roots occluding <10% cross-sectional area

Grade 3 Moderate Fracture with no displacement; joint gap 0.5"–1" Medium root mass; grease collar occluding 10–25%

Grade 4 Significant Broken pipe (pieces displaced); deflection >5–10% Heavy root mass or grease occluding 25–50% flow

Grade 5 Critical / Imminent Failure Collapsed pipe; hole with soil/void visible Total obstruction; root/grease blockage >50%

Pipe Rating Index (PRI)

PACP software aggregates individual defect scores across a pipe segment to generate standardized asset management scores: Pipe Structural Score = ∑ ( Structural Defect Grades ) \text{Pipe Structural Score} = \sum (\text{Structural Defect Grades}) Pipe Structural Score = ∑ ( Structural Defect Grades ) Structural Pipe Rating Index (SPRI) = Total Structural Score Total Number of Structural Defects \text{Structural Pipe Rating Index (SPRI)} = \frac{\text{Total Structural Score}}{\text{Total Number of Structural Defects}} Structural Pipe Rating Index (SPRI) = Total Number of Structural Defects Total Structural Score ​

A pipe with multiple Grade 4 and Grade 5 defects receives the highest renewal priority for trenchless lining (CIPP) or emergency point repair.

Other Locating and Inspection Platforms

The Need-to-Know Criteria pair CCTV with acoustic evaluation, visual, and drone inspection, because no single platform suits every asset.

Drones (UAVs). Aerial drones photograph outfalls, stream crossings, easements grown over with vegetation, and treatment or lift station sites for asset records. Confined-space and in-pipe drones — small collision-tolerant aircraft with onboard lighting and cameras — inspect large-diameter interceptors, siphon chambers, wet wells, and tunnels without a human entry . That is their decisive advantage: an asset that would otherwise require a permit-required confined space entry can be inspected from outside it. Their limits are flight time measured in minutes, dependence on artificial lighting, and the inability to measure or clean.

Zoom/pole cameras. A pole-mounted zoom camera lowered into a manhole surveys both incoming and outgoing pipe from the surface in a few minutes. It is the standard rapid-screening tool for prioritizing which segments deserve a full CCTV run — far faster than a crawler, but it cannot see past the first bend or grade a defect to full PACP standards.

Laser profiling and sonar. Laser rings measure ovality and capacity loss above the waterline; sonar profiles the silted portion below it. Combined with CCTV in a multi-sensor run, they quantify deformation and sediment that video alone can only estimate.

Push cameras. Small self-contained reels for laterals and small-diameter lines that a crawler cannot enter.