Study guide

9.1 SDWA & Federal Drinking Water Regulations

ABC/WPI Water Distribution Operator Class I Certification Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Certification, Eligibility & the WPI/ABC System 1.3 Study Plan & How to Use This Guide

2 Distribution Components — Pipes, Joints & Fittings

2.1 Mains & Service Lines 2.2 Pipe Materials (PVC, DI, CI, AC, HDPE, Copper, Steel) 2.3 Joints, Fittings & Thrust Restraint

3 Distribution Components — Valves, Hydrants, Storage & Wells

3.1 Valves (Gate, Butterfly, Check, PRV, Air Release, Blow-off) 3.2 Fire Hydrants 3.3 Storage Facilities (Ground, Elevated, Hydropneumatic) 3.4 Pumps & Pump Stations 3.5 Wells, Water Levels & Sanitary Condition

4 Meters, Backflow Devices, SCADA, Hydraulics & Demand

4.1 Meters & Metering (AMR/AMI) 4.2 Backflow Prevention Devices (Air Gap, RPZ, DCVA, PVB) 4.3 SCADA & Instrumentation 4.4 Distribution Hydraulics: Pressure, C-factor, Head Loss 4.5 System Demand, Water Production & Design Basics

5 Installation — Excavation, Bedding & Sewer Separation

5.1 Excavation Safety & Trenching (OSHA Subpart P) 5.2 Bedding, Backfill & Thrust Blocks 5.3 Separation from Sewer Mains

6 Installation — Pressure Testing & Disinfection

6.1 AWWA C600 Hydrostatic Pressure Testing 6.2 AWWA C651 Disinfection of New Mains 6.3 Service Line Installation, Tapping & Main Repairs

7 Operations & Maintenance

7.1 Valve Exercising & Hydrant Maintenance 7.2 Flushing & Unidirectional Flushing 7.3 Storage Facility Cleaning & Disinfection 7.4 Meter Reading & Underground Locating

8 Water Quality Monitoring & Lab Analysis

8.1 Disinfection Principles: Free vs Combined Chlorine, Breakpoint 8.2 Chemical Dosage & Feed Equipment 8.3 Sample Collection & Lab Analysis (Chlorine Residual, pH, Turbidity) 8.4 Lab Interpretation & Distribution Water Quality Problems

9 Regulations, Sampling & Public Notification

9.1 SDWA & Federal Drinking Water Regulations 9.2 Revised Total Coliform Rule (RTCR) 9.3 Lead & Copper Rule Revisions (LCRR) 9.4 Public Notification, CCR & Sampling Techniques

10 Safety, Security & Administrative Procedures

10.1 PPE, Safe Work Practices & Lockout/Tagout 10.2 Traffic Control (MUTCD) & Confined Space Entry 10.3 Underground Locating (811) & APWA Color Codes 10.4 Cross-Connection Control Program & Hazard Levels 10.5 System Maps, Schematics, Plans & Asset Management

11 Security, Records, Math Review & Final Readiness

11.1 Emergency Response, Facility Security & Water Loss Control 11.2 Recordkeeping, SOPs & Customer Inquiries 11.3 Operator Math: Flow, Pressure, Head & Pipe Volume 11.4 Operator Math: Chemical Feed & Chlorine Dose 11.5 Full-Length Practice & Test-Day Strategy

9.1 SDWA & Federal Drinking Water Regulations

Key Takeaways Explain This Topic AI

The Safe Drinking Water Act (SDWA) of 1974, amended in 1986 and 1996, authorizes EPA to set enforceable national drinking-water standards that states implement under primacy.

National Primary Drinking Water Regulations (NPDWRs) include MCLs (enforceable, health-based), MCLGs (non-enforceable goals set at zero for carcinogens), and treatment-technique rules where an MCL is impractical.

EPA sets the standards, the primacy state agency enforces them, and the public water system must sample, report, and keep records.

Distribution operators are the last barrier before the customer, so they must understand which rules drive tap sampling, residual monitoring, and public notification.

Last updated: August 2026

9.1 SDWA & Federal Drinking Water Regulations

Quick Answer: The Safe Drinking Water Act (SDWA) of 1974 (amended 1986 and 1996) authorizes the U.S. Environmental Protection Agency (EPA) to set national drinking-water standards. EPA publishes National Primary Drinking Water Regulations (NPDWRs) with Maximum Contaminant Levels (MCLs) (enforceable, health-based), Maximum Contaminant Level Goals (MCLGs) (non-enforceable health goals), and treatment-technique (TT) rules where an MCL is impractical. EPA also publishes National Secondary Drinking Water Regulations (NSDWRs) — non-enforceable aesthetic guidelines for taste, odor, color, iron, manganese, and total dissolved solids. States adopt and enforce the primary rules under primacy ; public water systems sample, report, and notify.

A Brief History of the SDWA

Congress passed the Safe Drinking Water Act in 1974 after studies showed many community supplies were unmonitored and contaminants could pose chronic health risks. The 1986 Amendments required EPA to regulate a listed set of contaminants on a strict schedule, banned lead solder and leaded pipes in new plumbing (the cutoff that drives Lead and Copper Rule Tier 1 site selection), and strengthened surface-water filtration. The 1996 Amendments added the Consumer Confidence Report requirement, the Drinking Water State Revolving Fund (DWSRF) for infrastructure financing, source-water assessment, operator certification, and a risk-based cost-benefit approach before EPA regulates a new contaminant. The 1986 lead-solder ban closes the window that makes post-1982 lead-soldered plumbing a Tier 1 lead sampling site; the 1996 amendments created the CCR delivered every July 1.

As a Class I distribution operator, you are the last barrier before the customer's tap. Several SDWA rules trigger at the tap or in the distribution main: the Lead and Copper Rule is sampled at customer taps; the Total Coliform Rule is sampled in distribution; disinfection byproducts form in the mains.

Primary vs. Secondary Regulations

National Primary Drinking Water Regulations (NPDWRs) are enforceable and health-based — coliform, nitrate, lead/copper (TT), arsenic, disinfection byproducts. National Secondary Drinking Water Regulations (NSDWRs) are non-enforceable aesthetic guidelines — iron 0.3 mg/L, manganese 0.05 mg/L, total dissolved solids 500 mg/L, sulfate 250 mg/L, pH 6.5–8.5. States may adopt secondary standards as enforceable, but EPA does not. A "rusty water" or metallic-taste complaint usually tracks to an NSDWR parameter (iron, manganese), not an MCL.

The Standard-Setting Hierarchy (Primary Rules)

Within the NPDWRs, EPA uses four compliance tools:

  • Tool Enforceable? What It Is Example
  • MCLG No Health goal, set with a margin of safety; often zero for known carcinogens Lead MCLG = 0

MCL Yes Maximum permissible level in drinking water; set as close to the MCLG as feasible Nitrate MCL = 10 mg/L

Treatment Technique (TT) Yes Required process instead of an MCL, when measurement is impractical Surface Water Treatment Rule filtration/disinfection; Lead and Copper Rule corrosion control

Action Level Yes (triggers actions) A threshold that triggers treatment, monitoring, and education — not an MCL violation by itself Lead 0.015 mg/L, copper 1.3 mg/L at 90th percentile

An MCL is a number a lab can measure. A treatment-technique rule is enforced by confirming the required process is operating. An action level — unique to the Lead and Copper Rule — triggers additional actions but the exceedance itself is not an MCL violation.

Roles Under Primacy

The SDWA is built on a federal-state partnership called primacy :

EPA sets national standards (NPDWRs), approves analytical methods, and oversees state programs.

The primacy state agency (state drinking-water program) adopts rules at least as stringent as EPA's, issues monitoring plans, conducts sanitary surveys, and enforces violations.

The public water system collects samples, reports results, issues public notification, and maintains records.

A state must adopt a new federal rule within two years to retain primacy. If a state fails to adopt or enforce a rule, EPA steps in and enforces it directly . Operators in a primacy state deal with the state agency — not EPA — for monitoring plans, reporting, sanitary surveys, and violation response.

Public Water System Categories and Why They Matter

Public water systems (PWS) fall into categories that drive which rules apply:

Community Water System (CWS) — 25+ year-round residents or 15+ service connections; subject to the CCR and the full rule suite.

Non-Transient Non-Community Water System (NTNCWS) — 25+ of the same people over 6 months (e.g., a school, factory). Most rules apply; no CCR mailing.

Transient Non-Community Water System (TNCWS) — 25+ people for 60+ days/year but not the same people (e.g., a rest stop). Fewer rules (nitrate, coliform; no CCR).

Why classification matters on the exam: the CCR is required only for community systems. Lead and copper sampling applies to CWS and NTNCWS but not to most TNCWS. Coliform frequency scales with population and system type. For a Class I distribution operator, most day-to-day sampling falls under the RTCR , the Lead and Copper Rule , and the disinfection byproduct rules — all NPDWRs.

System Obligations in Plain Terms

Under the SDWA a public water system must sample on a schedule (per an approved siting plan), report results to the state , issue public notification on violations (24 hr Tier 1, 30 days Tier 2, annually Tier 3), maintain records (3–10 years), and — for community systems — deliver the CCR by July 1 and certify to the state.

Violations vs. Exceedances

An MCL violation occurs when a contaminant exceeds the MCL in a compliance sample (or an RTCR assessment trigger is hit). An action-level exceedance is different: under the Lead and Copper Rule, lead above 0.015 mg/L in the 90th-percentile sample is not a violation — it triggers corrosion control, source monitoring, public education, and possibly lead service line replacement. This distinction shows up on the exam.

Exam Tip

If a question asks who enforces a drinking-water rule, the answer is the primacy state agency , not EPA directly. If it asks who samples , the answer is the public water system . If it asks which systems deliver a CCR , the answer is community water systems . If it asks whether iron or manganese is primary or secondary, the answer is secondary (NSDWRs) — aesthetic, non-enforceable.