Study guide
3.4 Graphing Linear Inequalities and Systems
ACCUPLACER Advanced Algebra and Functions Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Scoring, Skills Insight Bands, and Placement 1.3 How to Study for AAF
2 Linear Equations
2.1 Writing Linear Equations in One and Two Variables 2.2 Solving Linear Equations 2.3 Linear Inequalities 2.4 Systems of Two Linear Equations
3 Linear Applications and Graphs
3.1 Slope, Intercepts, and Graphing Lines 3.2 Parallel and Perpendicular Lines 3.3 Modeling with Linear Functions 3.4 Graphing Linear Inequalities and Systems
4 Factoring
4.1 GCF, Grouping, and Special Products 4.2 Factoring Quadratic Trinomials 4.3 Factoring Cubics and Higher Polynomials
5 Quadratics
5.1 Quadratic Forms, Graphs, Vertex, and Intercepts 5.2 Solving Quadratics by Factoring 5.3 Quadratic Formula and Completing the Square 5.4 Quadratic Inequalities and Quadratic-Linear Systems
6 Functions
6.1 Function Notation, Evaluation, Domain, and Range 6.2 Graphs of Functions, Vertical Line Test, Maxima and Minima 6.3 Function Operations, Composition, and Inverses 6.4 Transformations and Interpreting Functions in Context
7 Radical and Rational Equations
7.1 Simplifying Radical Expressions 7.2 Solving Radical Equations and Extraneous Roots 7.3 Rational Expressions and Equations 7.4 Graphs, Domain, and Range of Radical and Rational Functions
8 Polynomial Equations
8.1 Polynomial Operations and Structure 8.2 Solving Polynomial Equations 8.3 Graphing Polynomials, Roots, and End Behavior
9 Exponential and Logarithmic Equations
9.1 Exponential Functions, Growth, and Decay 9.2 Graphs of Exponential Functions 9.3 Logarithms and Logarithmic Properties 9.4 Solving Exponential and Logarithmic Equations
10 Geometry Concepts for Algebra 1
10.1 Area, Perimeter, and Prism Volume 10.2 Distance Formula and Pythagorean Theorem 10.3 Dilations, Rotations, Translations, and Reflections
11 Geometry Concepts for Algebra 2
11.1 Volume of Cylinders, Cones, and Spheres 11.2 Intersecting Lines and Angle Relationships 11.3 Triangle Similarity and Congruence 11.4 Circles in the Coordinate Plane
12 Trigonometry
12.1 Right-Triangle Trigonometry and Special Triangles 12.2 Unit Circle, Radians, and Arc Length 12.3 Trigonometric Graphs and Identities 12.4 Solving Trig Equations; Law of Sines and Cosines
3.4 Graphing Linear Inequalities and Systems
Key Takeaways Explain This Topic AI
For y > mx + b use a dashed boundary and shade above; for y ≥ mx + b use a solid boundary and shade above. Reverse above/below for < and ≤.
A test point not on the line — usually (0, 0) — decides which side to shade; if the point fails the inequality, shade the opposite side.
The graphical solution of y = 2x − 1 and y = −x + 5 is the intersection point (2, 3), the same ordered pair substitution produces algebraically.
Two distinct parallel lines give a system with no solution; coincident lines give infinitely many solutions; different slopes give exactly one intersection.
A system of inequalities is the overlap of the shaded half-planes; a point on a dashed boundary is not included.
Last updated: August 2026
3.4 Graphing Linear Inequalities and Systems
Quick Answer: Graph y > m x + b y > mx + b y > m x + b as the line y = m x + b y = mx + b y = m x + b drawn dashed (the boundary is not included) and shade the side that a test point satisfies. Use a solid line for ≥ \ge ≥ or ≤ \le ≤ . A system of two linear equations is solved graphically at the intersection point . A system of inequalities is the overlap of the shaded regions .
College Board Table 11 includes linear inequalities and systems of equations under Linear applications and graphs (10–15% of AAF, 2–3 CAT items). The algebraic methods for solving two-by-two systems live in Systems of Two Linear Equations ; this section is the graphical companion — reading a picture, drawing a picture, and knowing what the picture means. FREE AAF practice is at /practice/accuplacer-advanced-algebra .
One Linear Inequality in Two Variables
Start with the boundary line y = m x + b y = mx + b y = m x + b (or A x + B y = C Ax + By = C A x + B y = C ). Then two decisions:
- Symbol Boundary Shade
- > > > or < < < Dashed (points on the line fail) Side that makes the inequality true
- ≥ \ge ≥ or ≤ \le ≤ Solid (points on the line count) Side that makes the inequality true
The reliable shade test is a test point not on the line, usually ( 0 , 0 ) (0, 0) ( 0 , 0 ) unless the line through the origin makes ( 0 , 0 ) (0, 0) ( 0 , 0 ) useless.
Worked example. Graph y > − 1 2 x + 3 y > -\frac{1}{2}x + 3 y > − 2 1 x + 3 .
Graph y = − 1 2 x + 3 y = -\frac{1}{2}x + 3 y = − 2 1 x + 3 : y-intercept ( 0 , 3 ) (0, 3) ( 0 , 3 ) , slope down 1, right 2. Draw it dashed .
Test ( 0 , 0 ) (0, 0) ( 0 , 0 ) : is 0 > − 1 2 ( 0 ) + 3 0 > -\frac{1}{2}(0) + 3 0 > − 2 1 ( 0 ) + 3 ? Is 0 > 3 0 > 3 0 > 3 ? No.
Shade the side that does not contain ( 0 , 0 ) (0, 0) ( 0 , 0 ) — the side above the line, because y y y is greater than the line's y-value.
When the inequality is already solved for y y y , a shortcut matches the inequality direction: y > m x + b y > mx + b y > m x + b shades above ; y < m x + b y < mx + b y < m x + b shades below . When it is not solved for y y y , do not guess above. For 2 x + 4 y ≤ 8 2x + 4y \le 8 2 x + 4 y ≤ 8 , first write y ≤ − 1 2 x + 2 y \le -\frac{1}{2}x + 2 y ≤ − 2 1 x + 2 (dividing by a positive 4 keeps the inequality direction), then shade on and below a solid line. If you divide by a negative number, flip the inequality — the same rule as one-variable inequalities.
Worked example with a reversed inequality. − 3 x + y < 6 -3x + y < 6 − 3 x + y < 6 rearranges to y < 3 x + 6 y < 3x + 6 y < 3 x + 6 . Dashed line through ( 0 , 6 ) (0, 6) ( 0 , 6 ) with slope 3 3 3 ; shade below. Equivalent check: − 2 x − y ≥ 4 -2x - y \ge 4 − 2 x − y ≥ 4 → multiply by − 1 -1 − 1 and flip → 2 x + y ≤ − 4 2x + y \le -4 2 x + y ≤ − 4 → y ≤ − 2 x − 4 y \le -2x - 4 y ≤ − 2 x − 4 . Solid line, shade below. Substituting ( 0 , 0 ) (0, 0) ( 0 , 0 ) into y ≤ − 2 x − 4 y \le -2x - 4 y ≤ − 2 x − 4 gives 0 ≤ − 4 0 \le -4 0 ≤ − 4 , false, so ( 0 , 0 ) (0, 0) ( 0 , 0 ) is not in the shade — consistent with shading below a line whose intercept is already at − 4 -4 − 4 .
Vertical and horizontal inequalities follow the four slope cases from Section 3.1. x > 2 x > 2 x > 2 is a dashed vertical line at x = 2 x = 2 x = 2 , shade to the right . x ≤ − 1 x \le -1 x ≤ − 1 is a solid vertical line at x = − 1 x = -1 x = − 1 , shade to the left . y ≤ − 1 y \le -1 y ≤ − 1 is a solid horizontal line at y = − 1 y = -1 y = − 1 , shade downward . y > 4 y > 4 y > 4 is a dashed horizontal line at y = 4 y = 4 y = 4 , shade upward .
Systems of Two Linear Equations, Graphically
Two lines in the plane meet in one of three ways — the same three cases you solve algebraically in the linear-equations chapter:
- Graph Algebra Solutions
- Lines cross at one point Slopes different One ordered pair (the intersection)
- Lines coincide (same line) Same slope and same intercept Infinitely many
- Lines parallel and distinct Same slope, different intercepts None
- Worked example. Solve graphically: y = 2 x − 1 y = 2x - 1 y = 2 x − 1 y = − x + 5 y = -x + 5 y = − x + 5
The first line has slope 2 2 2 , intercept − 1 -1 − 1 . The second has slope − 1 -1 − 1 , intercept 5 5 5 . Different slopes ⇒ they intersect once. Set 2 x − 1 = − x + 5 2x - 1 = -x + 5 2 x − 1 = − x + 5 to read the intersection exactly: 3 x = 6 3x = 6 3 x = 6 , x = 2 x = 2 x = 2 , y = 3 y = 3 y = 3 . The graphical solution is the point ( 2 , 3 ) (2, 3) ( 2 , 3 ) . Check both originals: 2 ( 2 ) − 1 = 3 2(2) - 1 = 3 2 ( 2 ) − 1 = 3 and − 2 + 5 = 3 -2 + 5 = 3 − 2 + 5 = 3 . On a CAT grid you would see the two lines cross at that lattice point; the algebraic confirmation is the same substitution or elimination you practiced at /study-guides/accuplacer-advanced-algebra/linear-equations/systems-of-linear-equations .
If the second equation had been y = 2 x + 4 y = 2x + 4 y = 2 x + 4 , the graph would be two parallel lines (both slope 2, intercepts − 1 -1 − 1 and 4 4 4 ) and the system would have no solution . If it had been 2 y = 4 x − 2 2y = 4x - 2 2 y = 4 x − 2 , it would simplify to y = 2 x − 1 y = 2x - 1 y = 2 x − 1 , the same line , and every point on that line would be a solution.
Read a printed graph the same way: if the lines visibly cross, estimate the intersection, then check it in both equations . AAF will put the crossing slightly off a nearby lattice point that looks nice, to catch students who only glance. If the crossing appears near ( 3 , 2 ) (3, 2) ( 3 , 2 ) but ( 3 , 2 ) (3, 2) ( 3 , 2 ) fails one equation, compute the exact intersection instead of rounding to the pretty point.
Systems of Linear Inequalities
A system of inequalities asks for the region that satisfies every inequality at once — the overlap (intersection) of the individual shaded half-planes.
Worked example. Graph the solution set of y ≥ x − 1 y \ge x - 1 y ≥ x − 1 y < − 2 x + 4 y < -2x + 4 y < − 2 x + 4
Solid line y = x − 1 y = x - 1 y = x − 1 , shade above (test ( 0 , 0 ) (0, 0) ( 0 , 0 ) : 0 ≥ − 1 0 \ge -1 0 ≥ − 1 , true, so include the origin side).
Dashed line y = − 2 x + 4 y = -2x + 4 y = − 2 x + 4 , shade below (test ( 0 , 0 ) (0, 0) ( 0 , 0 ) : 0 < 4 0 < 4 0 < 4 , true).
The solution is the wedge where those two shadings overlap. The boundary of the first line is included; the boundary of the second is not. Their intersection point — x − 1 = − 2 x + 4 x - 1 = -2x + 4 x − 1 = − 2 x + 4 , 3 x = 5 3x = 5 3 x = 5 , x = 5 / 3 x = 5/3 x = 5/3 , y = 2 / 3 y = 2/3 y = 2/3 — sits on the solid line and off the dashed line, so it is not in the solution set.
A second test point inside the intended wedge, such as ( 0 , 2 ) (0, 2) ( 0 , 2 ) : 2 ≥ 0 − 1 2 \ge 0 - 1 2 ≥ 0 − 1 is true and 2 < 4 2 < 4 2 < 4 is true, so ( 0 , 2 ) (0, 2) ( 0 , 2 ) is in. A point such as ( 3 , 0 ) (3, 0) ( 3 , 0 ) : 0 ≥ 3 − 1 0 \ge 3 - 1 0 ≥ 3 − 1 is false, so it is out even though it is below the dashed line.
For three inequalities the overlap can be a triangle (a bounded feasible region). AAF typically stays at two inequalities, but the test-point logic does not change: a point is in the solution only if it satisfies all of them.
Connecting the Picture Back to Algebra
Graphical and algebraic views of a system are the same object:
Intersection point ↔ \leftrightarrow ↔ unique solution of the two equations.
Parallel distinct lines ↔ \leftrightarrow ↔ $0 = $ a nonzero number, no solution.
Coincident lines ↔ \leftrightarrow ↔ 0 = 0 0 = 0 0 = 0 , infinitely many solutions.
Shaded overlap ↔ \leftrightarrow ↔ the set of ordered pairs that satisfy every inequality.
When an item shows a shaded graph and asks which system it matches, recover each boundary's equation from intercepts or slope, then use a test point inside the shade to choose > > > versus < < < . That is the reverse of the drawing process, and it is a favorite read-the-graph task in this content area.
Keep practicing both directions — equation to graph and graph to equation. Use this chapter's slope and intercept skills to draw the boundaries, and use the linear-equations chapter's substitution and elimination to confirm intersection points exactly.