Study guide
11.1 Infusion Rates & IV Flow Calculations
DHA Pharmacist Licensing Assessment PHO5481
Track your progress as you read
Finished sections get a check mark.
1 Exam Overview & Licensing Pathway
1.1 Current Exam Facts & Format 1.2 Eligibility, PQR & the Sheryan Application Process 1.3 Study Strategy & Test-Day Plan
2 Cardiovascular Pharmacology
2.1 Antihypertensives & RAAS Agents 2.2 Heart Failure & Antiarrhythmic Drugs 2.3 Lipid-Lowering & Antianginal Agents
3 Endocrine & Metabolic Pharmacology
3.1 Insulin & Oral Antidiabetic Agents 3.2 Thyroid, Bone & Calcium Agents 3.3 Corticosteroids & Other Hormonal Agents
4 Anti-Infective Pharmacology
4.1 Beta-Lactam Antibiotics 4.2 Non-Beta-Lactam Antibacterials 4.3 Antifungals, Antivirals & Antituberculars
5 CNS, Psychiatric & Pain Pharmacology
5.1 Psychiatric Pharmacology 5.2 Antiepileptics & Neurologic Agents 5.3 Analgesics: NSAIDs, Opioids & Migraine
6 Respiratory, GI & Hematology Pharmacology
6.1 Respiratory Pharmacology 6.2 Gastrointestinal Pharmacology 6.3 Anticoagulants, Antiplatelets & Hematology Agents
7 Pharmaceutical Care: Cardiometabolic Disease
7.1 Diabetes Management & Counseling 7.2 Hypertension & Dyslipidemia Management 7.3 Heart Failure & Anticoagulation Management
8 Pharmaceutical Care: Respiratory, Rheumatology & Infection
8.1 Asthma & COPD Management 8.2 Gout, Pain & Rheumatologic Care 8.3 Infection Management & Antimicrobial Stewardship
9 Counseling, Monitoring & Special Populations
9.1 Patient Counseling, Adherence & Health Literacy 9.2 Therapeutic Monitoring & Laboratory Interpretation 9.3 Pregnancy, Pediatrics, Geriatrics & Organ Impairment 9.4 Pharmacoeconomics & Formulary Decision Making
10 Pharmaceutical Calculations I
10.1 Concentration, Ratio & Percentage Strength 10.2 Weight-Based & BSA Dosing 10.3 Dilution, Concentration & Alligation
11 Pharmaceutical Calculations II
11.1 Infusion Rates & IV Flow Calculations 11.2 Dispensing Quantities & Days' Supply 11.3 Compounding Calculations, Isotonicity & Milliequivalents
12 UAE Pharmacy Law & Regulation
12.1 UAE Regulatory Framework & Licensing Authorities 12.2 Medicine Registration, Pricing & Supply Chain 12.3 Prescription Requirements & Validity
13 Controlled Drugs, Ethics & Pharmacovigilance
13.1 Controlled & Semi-Controlled Medicines in the UAE 13.2 Ethics, Confidentiality & Generic Substitution 13.3 Pharmacovigilance, Recall & Medicine Disposal
14 Pharmacokinetics I: ADME
14.1 Absorption & Bioavailability 14.2 Distribution & Protein Binding 14.3 Metabolism & Elimination
15 Pharmacokinetics II: Kinetics, Dosing & TDM
15.1 Half-Life, Clearance & Kinetic Order 15.2 Loading & Maintenance Dosing 15.3 Therapeutic Drug Monitoring
16 OTC Medicines & Self-Care
16.1 Cough, Cold & Allergic Rhinitis 16.2 GI Self-Care: Heartburn, Constipation & Diarrhoea 16.3 Pain & Fever Self-Care 16.4 Referral Red Flags, Emergency Contraception & Skin
17 Medication Safety
17.1 High-Alert Medications & Error-Prone Abbreviations 17.2 Medication Reconciliation & Duplicate Therapy 17.3 Adverse Drug Reactions & Hypersensitivity Recognition
18 Sterile & Nonsterile Compounding
18.1 Aseptic Technique & Compounding Environments 18.2 Parenteral, TPN & Cytotoxic Preparation 18.3 Nonsterile Compounding
19 Pharmaceutics, Biopharmaceutics & Toxicology
19.1 Dosage Form Design & the Biopharmaceutics Classification System 19.2 Dissolution & Excipients 19.3 Toxicology: Poisoning Recognition & Antidotes
20 Infection Control, Natural Products, Medicinal Chemistry & Pharmacogenomics
20.1 Infection Control & Immunization 20.2 Pharmacognosy & Dietary Supplements 20.3 Medicinal Chemistry Essentials 20.4 Clinical Pharmacogenomics
11.1 Infusion Rates & IV Flow Calculations
Key Takeaways Explain This Topic AI
Drip rate (drops/min) = volume (mL) × drop factor (gtt/mL) ÷ time in minutes — always convert hours to minutes first
With a 60 gtt/mL microdrip set, drops per minute numerically equal mL per hour
For dose-based infusions, first find the concentration (units/mL or mcg/mL), then divide the ordered dose per hour by the concentration
For weight-based infusions (mcg/kg/min), multiply the dose by the weight and by 60 to get mcg/hour before dividing by the concentration
The classic exam traps are forgetting to convert hours to minutes and mixing up the drop factor with the flow rate
Last updated: August 2026
Infusion Rates & IV Flow Calculations
Intravenous flow-rate questions are guaranteed marks in the Pharmacy Calculation & Compounding area of the DHA Pharmacist Licensing Assessment. Every one of them reduces to the same discipline: write down what you have, convert every unit into the unit the answer needs, and only then divide. Most errors are not arithmetic errors — they are unit errors.
- The core drip-rate formula
- Drip rate (drops/min) = volume (mL) × drop factor (gtt/mL) ÷ time (minutes)
The drop factor is printed on the giving set and tells you how many drops make 1 mL:
- Set type Drop factor Typical use
- Macrodrip 10 gtt/mL Rapid adult fluid replacement
- Macrodrip 15 gtt/mL Standard adult infusions
- Macrodrip 20 gtt/mL Standard adult infusions
- Microdrip 60 gtt/mL Paediatrics, precise/low-rate infusions
Worked example 1 (macrodrip): Infuse 1 litre of sodium chloride 0.9% over 8 hours using a 15 gtt/mL set.
- Convert time to minutes: 8 h × 60 = 480 min
- Multiply volume by drop factor: 1,000 mL × 15 gtt/mL = 15,000 drops
- Divide by time: 15,000 ÷ 480 = 31.25 drops/min
- Round to a whole drop: 31 drops/min
Worked example 2 (microdrip): Infuse 500 mL over 4 hours using a 60 gtt/mL microdrip set.
- Time: 4 h × 60 = 240 min
- 500 mL × 60 gtt/mL = 30,000 drops
- 30,000 ÷ 240 = 125 drops/min
Notice the shortcut: with a 60 gtt/mL microdrip set, drops/min always equals mL/hour (500 mL ÷ 4 h = 125 mL/h). Examiners love this because candidates who do not know it waste two minutes.
Pump rates in mL/hour
Electronic infusion pumps are set in mL/hour , which is simply volume ÷ time in hours:
- 1,000 mL over 8 hours → 1,000 ÷ 8 = 125 mL/hour
- 500 mL over 6 hours → 500 ÷ 6 = 83.3 → 83 mL/hour
If a question gives you a drip rate and a drop factor and asks for the pump equivalent, work backwards: mL/hour = drops/min × 60 ÷ drop factor. For 31 drops/min on a 15 gtt/mL set: 31 × 60 ÷ 15 = 124 mL/hour (the small difference from 125 is the rounding of the drip rate).
Dose-based infusions: units/hour and mg/hour
For drug infusions the order is a dose per unit time, not a volume. The method has two steps: find the concentration of the bag, then divide the ordered rate by that concentration.
Worked example 3 (heparin, units/hour): A bag contains 25,000 units of heparin in 500 mL. The order is 1,200 units/hour. What rate in mL/hour?
- Concentration: 25,000 units ÷ 500 mL = 50 units/mL
- Rate: 1,200 units/hour ÷ 50 units/mL = 24 mL/hour
Worked example 4 (mg/hour): A lignocaine (lidocaine) bag contains 2 g in 500 mL. The order is 2 mg/minute. Set the pump.
- Concentration: 2 g = 2,000 mg; 2,000 ÷ 500 = 4 mg/mL
- Order per hour: 2 mg/min × 60 = 120 mg/hour
- Rate: 120 mg/hour ÷ 4 mg/mL = 30 mL/hour
Insulin sliding-scale concept: intravenous insulin is commonly prepared as 50 units of soluble insulin in 50 mL sodium chloride 0.9% (1 unit/mL) in a syringe driver. At that concentration the mL/hour rate equals the units/hour ordered, so a sliding scale that says "4 units/hour if blood glucose is 12–15 mmol/L" translates directly to 4 mL/hour. The exam point is to recognise the deliberately convenient 1 unit/mL concentration.
Weight-based infusions: mcg/kg/minute
Worked example 5 (dopamine): A 70 kg patient is prescribed dopamine at 5 mcg/kg/minute. The bag contains 400 mg dopamine in 250 mL. Calculate the pump rate in mL/hour.
- Concentration: 400 mg = 400,000 mcg; 400,000 ÷ 250 mL = 1,600 mcg/mL
- Dose per minute: 5 mcg/kg/min × 70 kg = 350 mcg/min
- Dose per hour: 350 × 60 = 21,000 mcg/hour
- Rate: 21,000 ÷ 1,600 = 13.125 → 13.1 mL/hour
Memorise the chain: mcg/kg/min × kg × 60 ÷ concentration (mcg/mL) = mL/hour. Forgetting the × 60 gives 0.22 mL/hour — a distractor that always appears in the options.
Completion time and volume remaining
Worked example 6: A 1,000 mL bag runs at 125 mL/hour, started at 08:00.
- Completion time: 1,000 ÷ 125 = 8 hours → finishes at 16:00
- Volume remaining after 3.5 hours: 125 × 3.5 = 437.5 mL infused; 1,000 − 437.5 = 562.5 mL remaining
- Time remaining: 562.5 ÷ 125 = 4.5 hours
- Error traps to check before submitting
Minutes vs hours: the drip-rate formula needs minutes; the pump formula needs hours. Convert once, at the start, and label it.
Drop factor misuse: do not multiply by the drop factor when the question asks for mL/hour, and do not skip it when the question asks for drops/min.
Concentration vs total content: 400 mg in 250 mL is a concentration of 1.6 mg/mL — never divide the dose by 400 mg directly.
Rounding: drip rates round to whole drops; pump rates usually to one decimal place. Rounding mid-calculation instead of at the end is a common source of wrong answers.