Study guide

3.1 Joint Arthrokinematics, Osteokinematics & Lever Systems

DHA Physiotherapist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview, UAE Regulatory Framework & Professional Practice

1.1 DHA Exam Structure, Sheryan Licensing & UAE PQR Requirements 1.2 UAE Healthcare Law, Informed Consent, Confidentiality & Documentation 1.3 Infection Prevention, Patient Safety & Clinical Risk Management

2 Chapter 2: Anatomy, Physiology & Tissue Healing Foundations

2.1 Musculoskeletal & Neuromuscular Anatomy Foundations 2.2 Neuroanatomy, Spinal Pathways & Pain Neurophysiology 2.3 Soft Tissue Healing Phases, Inflammation & Tissue Loading Responses

3 Chapter 3: Kinesiology, Biomechanics & Ergonomics

3.1 Joint Arthrokinematics, Osteokinematics & Lever Systems 3.2 Normal & Pathological Gait Analysis 3.3 Postural Assessment, Ergonomics & Work-Related Musculoskeletal Disorders

4 Chapter 4: Clinical Decision Making, Differential Diagnosis & Screening

4.1 Subjective History, Systems Review & Red Flag Screening 4.2 Physical Examination Sequencing, Special Tests & Diagnostic Validity 4.3 Clinical Reasoning Models, SMART Goal Setting & Outcome Measures

5 Chapter 5: Physical Agents & Thermal Modalities

5.1 Superficial Thermal Agents, Cryotherapy & Contrast Baths 5.2 Therapeutic Ultrasound, Phonophoresis & Diathermy 5.3 Mechanical Traction, Intermittent Compression & Hydrotherapy

6 Chapter 6: Electrotherapy & Photobiomodulation

6.1 TENS, Interferential Current (IFC) & Pain Modulation Mechanisms 6.2 Neuromuscular Electrical Stimulation (NMES) & Russian Current 6.3 Iontophoresis, High-Voltage Pulsed Current & Low-Level Laser Therapy

7 Chapter 7: Therapeutic Exercise Foundations & Manual Therapy

7.1 Exercise Prescription Principles: FITT, SAID & Progressive Overload 7.2 Stretching Modalities, Joint Mobilization & Manual Therapy Grades 7.3 Motor Learning Principles, Proprioception & Core Stabilization

8 Chapter 8: Musculoskeletal Rehabilitation: Spine

8.1 Cervical Spine Disorders, Whiplash & Cervical Radiculopathy 8.2 Thoracic Spine Dysfunction, Rib Mechanics & Postural Syndromes 8.3 Lumbar Spine Pathology: Disc Herniation, Stenosis & Spondylolisthesis

9 Chapter 9: Musculoskeletal Rehabilitation: Upper Extremity

9.1 Shoulder Pathology: Subacromial Impingement, Rotator Cuff & Frozen Shoulder 9.2 Elbow Disorders: Epicondylalgia & Nerve Entrapments 9.3 Wrist and Hand Conditions: Carpal Tunnel Syndrome & Tendinopathies

10 Chapter 10: Musculoskeletal Rehabilitation: Lower Extremity

10.1 Hip Disorders: Osteoarthritis, Labral Tears & Femoroacetabular Impingement 10.2 Knee Conditions: Ligamentous Tears, Meniscal Injury & Patellofemoral Pain 10.3 Foot and Ankle Conditions: Sprains, Achilles Tendinopathy & Plantar Fasciopathy

11 Chapter 11: Neurorehabilitation: Stroke, Brain Injury & Vestibular Disorders

11.1 Stroke Pathophysiology, Vascular Syndromes & Motor Assessment 11.2 Evidence-Based Stroke Rehabilitation & Task-Oriented Training 11.3 Traumatic Brain Injury & Cognitive-Motor Recovery 11.4 Vestibular Rehabilitation: BPPV, Hypofunction & Balance Retraining

12 Chapter 12: Neuromuscular Conditions & Spinal Cord Injury

12.1 Spinal Cord Injury: ASIA Impairment Scale & Autonomic Dysreflexia 12.2 Parkinson Disease: Clinical Presentation, Hoehn & Yahr Staging & Cueing 12.3 Multiple Sclerosis, Guillain-Barré Syndrome & Amyotrophic Lateral Sclerosis

13 Chapter 13: Cardiopulmonary Physical Therapy & Acute Care

13.1 Cardiopulmonary Assessment, Auscultation & Monitoring 13.2 Airway Clearance Techniques & Breathing Exercises 13.3 Phase I-III Cardiac Rehabilitation & Pulmonary Rehabilitation Protocols

14 Chapter 14: Sports Physical Therapy & Injury Prevention

14.1 Acute Sports Injury Management: PEACE & LOVE Protocol 14.2 Common Athletic Soft-Tissue Injuries & Overuse Syndromes 14.3 Return-to-Sport Testing, Functional Criteria & Injury Prevention Programs 14.4 Sport-Related Concussion: Recognition, Return-to-Learn & Graduated Return-to-Sport

15 Chapter 15: Special Populations: Pediatrics, Geriatrics & Women's Health

15.1 Pediatric Physiotherapy: Motor Milestones, Reflexes & Cerebral Palsy 15.2 Geriatric Physiotherapy: Sarcopenia, Frailty & Fall Prevention 15.3 Obstetric Physiotherapy: Pregnancy Biomechanics & Postpartum Care 15.4 Pelvic Floor Dysfunction & Urinary Incontinence Rehabilitation

3.1 Joint Arthrokinematics, Osteokinematics & Lever Systems

Key Takeaways Explain This Topic AI

Osteokinematics describes voluntary gross bone motion across cardinal planes around a joint axis, whereas arthrokinematics describes involuntary accessory articular surface motions (roll, slide, and spin) necessary for full physiological range of motion.

According to the Kaltenborn Convex-Concave Rule, when a convex joint surface moves upon a fixed concave surface, roll and slide occur in opposite directions; when a concave surface moves upon a fixed convex surface, roll and slide occur in the same direction.

Therapeutic joint mobilization glides for convex-on-concave joints must be directed opposite to the restricted osteokinematic bone swing (e.g., inferior glide for glenohumeral abduction, posterior glide for talocrural dorsiflexion).

The musculoskeletal system utilizes three distinct lever classes: First-class (fulcrum central; balancing equilibrium), Second-class (load central; mechanical advantage > 1.0, force multiplier), and Third-class (effort central; mechanical advantage < 1.0, speed and excursion multiplier, representing over 75% of body joints).

Torque is the product of muscle force and perpendicular moment arm (tau = F x d_perp); maximum rotational torque occurs when the tendon insertion angle is 90 degrees, while angles deviation below or above 90 degrees increase compressive stabilizing or distracting forces.

Last updated: September 2026

3.1 Joint Arthrokinematics, Osteokinematics & Lever Systems

Note

Core DHA Exam Relevance : Kinesiology and joint biomechanics form the absolute theoretical backbone of musculoskeletal manual therapy, orthopedic evaluation, and exercise prescription on the DHA Physiotherapist licensing exam. Expect multiple scenario-based questions requiring candidates to select the exact direction of passive mobilization glides based on Kaltenborn's convex-concave rule, identify anatomical lever classes in functional tasks, and calculate or predict torque and joint reaction forces.

Musculoskeletal movement requires the coordinated integration of gross skeletal rotations and microscopic articular surface translations. Understanding the distinction between voluntary physiological motion and involuntary joint accessory motion allows physiotherapists to diagnose joint restrictions accurately and apply targeted manual mobilization techniques to restore functional mobility.

Osteokinematic vs. Arthrokinematic Motion Fundamentals

Human movement science categorizes joint motions into two interdependent mechanical frameworks: osteokinematics and arthrokinematics.

Osteokinematics (Physiological Bone Motion)

Osteokinematics refers to the gross angular displacement of bones relative to one another in the three cardinal anatomical planes (sagittal, frontal, and transverse) around a joint axis of rotation:

Rotational Degrees of Freedom : Joints possess between one and three rotary degrees of freedom:

Uniaxial joints (1 degree of freedom): Hinge joints (e.g., humeroulnar, interphalangeal) and pivot joints (e.g., proximal radioulnar, atlantoaxial) permitting motion in one plane (flexion/extension or rotation).

Biaxial joints (2 degrees of freedom): Condyloid and saddle joints (e.g., radiocarpal, metacarpophalangeal, 1st carpometacarpal) permitting motion in two planes (flexion/extension and abduction/adduction).

Triaxial / Multiaxial joints (3 degrees of freedom): Ball-and-socket joints (e.g., glenohumeral, femoroacetabular) permitting motion across all three cardinal planes.

Control : Osteokinematic motions are voluntary, active physiological movements produced by skeletal muscle contraction (or passively through therapist guidance).

Arthrokinematics (Accessory Joint Surface Motion)

Arthrokinematics refers to the involuntary, microscopic translational and rotational movements occurring between the opposing articular surfaces of a joint. Because these movements cannot be performed actively in isolation by the patient, they are classified as accessory or component motions:

Roll (Rocking) : Multiple points along one moving articular surface contact multiple consecutive points on the stationary partner surface. Rolling occurs only when the two articulating surfaces are incongruent. Critical mechanical rule : Roll always occurs in the same direction as the osteokinematic movement of the swinging bone, regardless of surface geometry.

Slide (Glide) : A single contact point on one moving articular surface contacts multiple new points on the stationary partner surface. Pure sliding occurs between two flat, fully congruent surfaces. In human synovial joints, sliding accompanies rolling to prevent articular dislocation or joint surface overshooting.

Spin : A single point on one articular surface rotates continuously around a stationary longitudinal axis against a single point on the opposing surface (e.g., the radial head spinning on the capitulum of the humerus during forearm pronation/supination, or the femoral head spinning during hip flexion/extension).

  • Biomechanical Parameter Osteokinematics Arthrokinematics
  • Definition Gross angular movement of bones in space Microscopic motion between opposing articular surfaces
  • Measurement Units Degrees of angular motion (goniometry) Millimeters of linear translation / accessory glide
  • Patient Control Voluntary (active or passive) Involuntary (cannot be isolated actively)
  • Motion Types Flexion, extension, abduction, adduction, internal/external rotation Roll, slide (glide), spin

Reference Planes Sagittal, frontal, and transverse planes Planes relative to joint surface tangent (treatment plane)

Therapeutic Target Active/passive physiological range of motion (ROM) Joint mobilization, manual traction, joint capsule glides

The Convex-Concave Rule: Kaltenborn and MacConaill Principles

Freddy Kaltenborn and C.H. MacConaill formalized the relationship between articular surface geometry and the direction of accessory sliding. This relationship dictates how a physiotherapist must apply passive translatory glides during manual therapy. +--------------------------------------------------------------------------------+

  • | Kaltenborn Convex-Concave Rule |
  • +--------------------------------------------------------------------------------+
  • | 1. CONVEX Moving on CONCAVE Surface: |
  • | Roll and Slide occur in OPPOSITE directions. |
  • | (Therapeutic Mobilization Glide = OPPOSITE to restricted bone motion) |
  • | |
  • | 2. CONCAVE Moving on CONVEX Surface: |
  • | Roll and Slide occur in the SAME direction. |
  • | (Therapeutic Mobilization Glide = SAME as restricted bone motion) |
  • +--------------------------------------------------------------------------------+
  • 1. Convex Surface Moving on a Fixed Concave Surface

When the moving articular partner is convex and articulates within a fixed concave partner, the bone swings in one direction while the convex surface rolls in that same direction. However, to maintain joint congruency and avoid impinging against the periarticular rim, the convex surface must slide in the opposite direction to the roll:

Glenohumeral Joint : Convex humeral head moves on concave glenoid fossa.

Abduction : Humeral shaft swings superiorly -> Humeral head rolls superiorly -> Humeral head slides inferiorly . Mobilization to increase abduction = Inferior glide .

Flexion and Internal Rotation : Humeral head rolls anteriorly -> Humeral head slides posteriorly . Mobilization to increase flexion/IR = Posterior glide .

Extension and External Rotation : Humeral head rolls posteriorly -> Humeral head slides anteriorly . Mobilization to increase extension/ER = Anterior glide (use caution with anterior glenohumeral instability).

Talocrural Joint : Convex trochlea of the talus articulates within the concave mortise (tibiofibular socket).

Dorsiflexion : Foot swings dorsally/superiorly -> Talus rolls anteriorly -> Talus slides posteriorly . Mobilization to increase dorsiflexion = Posterior (dorsal) talar glide .

Plantarflexion : Foot swings inferiorly -> Talus rolls posteriorly -> Talus slides anteriorly . Mobilization to increase plantarflexion = Anterior (ventral) talar glide .

Femoroacetabular (Hip) Joint : Convex femoral head articulates within concave acetabulum.

Flexion : Femoral head rolls anteriorly -> Femoral head slides posteriorly/inferiorly .

Extension : Femoral head rolls posteriorly -> Femoral head slides anteriorly .

Abduction : Femoral shaft swings laterally -> Femoral head rolls superiorly/laterally -> Femoral head slides inferiorly/medially .

Internal Rotation : Femoral head rolls internally/anteriorly -> Femoral head slides posteriorly .

External Rotation : Femoral head rolls externally/posteriorly -> Femoral head slides anteriorly .

Radiocarpal Joint : Convex proximal carpal row (scaphoid, lunate, triquetrum) on concave distal radius and triangular fibrocartilage complex (TFCC).

Wrist Extension : Hand moves dorsally -> Carpals roll dorsally -> Carpals slide volar-ward (anteriorly) . Mobilization for extension = Volar (palmar) glide .

Wrist Flexion : Hand moves palmarly -> Carpals roll palmarly -> Carpals slide dorsally (posteriorly) . Mobilization for flexion = Dorsal glide .

Radial Deviation : Carpals roll radially -> Carpals slide ulnar-ward . Mobilization = Ulnar glide .

Ulnar Deviation : Carpals roll ulnarly -> Carpals slide radial-ward . Mobilization = Radial glide .

2. Concave Surface Moving on a Fixed Convex Surface

When the moving partner is concave and moves on a stationary convex partner, the roll and the slide occur in the exact same direction :

Tibiofemoral Joint (Open Kinetic Chain) : Concave tibial plateau moves on convex femoral condyles (e.g., seated knee extension):

Knee Extension : Tibia swings anteriorly -> Tibial plateau rolls anteriorly -> Tibial plateau slides anteriorly . Mobilization to increase open-chain extension = Anterior tibial glide .

Knee Flexion : Tibia swings posteriorly -> Tibial plateau rolls posteriorly -> Tibial plateau slides posteriorly . Mobilization to increase open-chain flexion = Posterior tibial glide .

Tibiofemoral Joint (Closed Kinetic Chain / Weight-Bearing) : The convex femoral condyles move on the stationary concave tibial plateau (e.g., squatting or rising from a chair):

Closed-chain Knee Extension (rising from a squat): Femur rolls anteriorly and slides posteriorly on the fixed tibia.

Closed-chain Knee Flexion (descending into a squat): Femur rolls posteriorly and slides anteriorly on the fixed tibia.

Metacarpophalangeal (MCP) and Interphalangeal (IP) Joints : Concave base of distal phalanx moving on convex head of proximal bone:

Flexion : Rolls palmarly -> Slides palmarly (volar glide) .

Extension : Rolls dorsally -> Slides dorsally (dorsal glide) .

Joint Surface Geometry and Mobilization Matrix

Joint Complex Moving Surface Stationary Surface Geometry Osteokinematic Motion Arthrokinematic Slide Mobilization Direction

Glenohumeral Humeral Head Glenoid Fossa Convex on Concave Abduction Inferior Inferior (caudal) glide

Glenohumeral Humeral Head Glenoid Fossa Convex on Concave Flexion / Internal Rot. Posterior Posterior (dorsal) glide

Glenohumeral Humeral Head Glenoid Fossa Convex on Concave Extension / External Rot. Anterior Anterior (ventral) glide

  • Hip Femoral Head Acetabulum Convex on Concave Flexion Posterior/Inferior Posterior/Inferior glide
  • Hip Femoral Head Acetabulum Convex on Concave Extension Anterior Anterior glide
  • Hip Femoral Head Acetabulum Convex on Concave Abduction Inferior Inferior glide

Tibiofemoral (Open) Tibial Plateau Femoral Condyles Concave on Convex Knee Extension Anterior Anterior tibial glide

Tibiofemoral (Open) Tibial Plateau Femoral Condyles Concave on Convex Knee Flexion Posterior Posterior tibial glide

Talocrural Talar Dome Malleolar Mortise Convex on Concave Dorsiflexion Posterior Posterior (dorsal) talar glide

Talocrural Talar Dome Malleolar Mortise Convex on Concave Plantarflexion Anterior Anterior (ventral) talar glide

Radiocarpal Proximal Carpals Distal Radius Convex on Concave Wrist Extension Volar / Palmar Volar (anterior) carpal glide

Radiocarpal Proximal Carpals Distal Radius Convex on Concave Wrist Flexion Dorsal Dorsal (posterior) carpal glide

1st CMC (Trapeziometacarpal) 1st Metacarpal Trapezium Saddle (Concave F/E; Convex Ab/Ad) Flexion / Extension Same (Palmar/Dorsal) Ulnar/Radial (same as motion)

1st CMC (Trapeziometacarpal) 1st Metacarpal Trapezium Saddle (Concave F/E; Convex Ab/Ad) Abduction / Adduction Opposite (Dorsal/Palmar) Dorsal glide for Abduction

Tip

The Screw-Home Mechanism of the Knee : In terminal open-chain knee extension (last 15-20 degrees), the tibia rotates externally (~10 degrees) on the stable femur to lock into maximum congruence. In closed-chain extension (rising from a squat), the femur rotates internally on the fixed tibia to achieve locking. The popliteus muscle is the key "unlocker" of the knee, initiating knee flexion by externally rotating the femur (in closed chain) or internally rotating the tibia (in open chain).

Mechanical Lever Systems in Human Biomechanics

Musculoskeletal joints operate as rigid anatomical levers rotating about an axis (fulcrum). An understanding of mechanical advantage ( M A MA M A ) is vital for evaluating muscle workload, designing safe progressive loading exercises, and understanding musculoskeletal vulnerability. Mechanical Advantage ( M A ) = Effort Arm Length ( E A ) Resistance Arm Length ( R A ) \text{Mechanical Advantage } (MA) = \frac{\text{Effort Arm Length } (EA)}{\text{Resistance Arm Length } (RA)} Mechanical Advantage ( M A ) = Resistance Arm Length ( R A ) Effort Arm Length ( E A ) ​

First-Class Levers (Fulcrum in the Center: F-A-R / E-A-R)

In a first-class lever , the axis of rotation (fulcrum) is located between the effort (muscle force) and the resistance (load/gravity) :

Mechanical Advantage : Can be greater than 1, equal to 1, or less than 1, depending entirely on the relative lengths of the effort arm ( E A EA E A ) and resistance arm ( R A RA R A ).

Primary Purpose : Designed for equilibrium, balance, and directional change .

Anatomical Examples :

Atlanto-Occipital Joint : The atlanto-occipital joint is the central axis ( A A A ). The anterior weight of the cranium and facial bones creates a forward flexion resistance moment ( R R R ). The posterior cervical extensor muscles (trapezius, splenius capitis, semispinalis) apply downward tensile force ( E E E ) to hold the head upright.

Elbow Extension in Overhead Push : The humeroulnar joint acts as the axis ( A A A ), the triceps tendon insertion on the olecranon process provides effort ( E E E ), and the load in the hand provides resistance ( R R R ).

Pelvis in Frontal Plane Balance : During unipedal stance, the femoral head acts as the axis, the body weight medial to the hip acts as the resistance, and the gluteus medius pulling lateral to the axis acts as the effort.

Second-Class Levers (Load in the Center: A-R-F / F-L-E)

In a second-class lever , the resistance (load) is located between the axis of rotation (fulcrum) and the effort (muscle force) :

Mechanical Advantage : Always strictly greater than 1.0 ( M A > 1 MA > 1 M A > 1 ) because the effort arm is permanently longer than the resistance arm ( E A > R A EA > RA E A > R A ).

Primary Purpose : Designed as a force multiplier . A relatively small muscular effort can move a massive external load. The trade-off is a substantial loss in movement speed and distance moved by the load.

Anatomical Examples :

Calf Raise / Plantarflexion in Standing : The metatarsophalangeal (MTP) joints act as the axis of rotation ( A A A ). The entire gravitational body weight transmitted through the tibia and talocrural joint acts as the central resistance ( R R R ). The gastrocnemius and soleus muscles apply upward muscular effort ( E E E ) through the Achilles tendon on the posterior calcaneus. Because the body weight falls between the MTP joints and the calcaneus, the effort arm spans from the MTPs to the heel, making it substantially longer than the resistance arm from the MTPs to the ankle joint.

Eccentric Biceps Contraction Lowering Forearm : The elbow is the axis, the resisting force is applied distally, and the muscle controls descent with high mechanical efficiency.

Third-Class Levers (Effort in the Center: A-F-R / F-E-L)

In a third-class lever , the effort (muscle force) is applied between the axis of rotation (fulcrum) and the resistance (load) :

Mechanical Advantage : Always strictly less than 1.0 ( M A < 1 MA < 1 M A < 1 ) because the effort arm is permanently shorter than the resistance arm ( E A < R A EA < RA E A < R A ).

Primary Purpose : Designed for speed, angular velocity, and distance (range of motion) . Because the muscle inserts close to the joint axis, a small muscle contraction produces a massive arc of movement and high linear velocity at the distal end of the limb. However, the muscle must generate internal forces far exceeding the external weight of the object moved, creating substantial compressive joint reaction forces.

Prevalence : This is the most common lever system in the human body , comprising over 75% to 80% of all musculoskeletal articulations.

Anatomical Examples :

Biceps Brachii during Elbow Flexion : The humeroulnar joint is the axis ( A A A ). The biceps tendon inserts on the radial tuberosity just distal to the axis, providing central effort ( E E E ). The weight of the forearm and any object held in the hand acts as the distal resistance ( R R R ).

Quadriceps Femoris during Knee Extension : The tibiofemoral joint is the axis ( A A A ). The patellar tendon inserts on the tibial tuberosity providing effort ( E E E ). The weight of the leg and foot acts as the distal load ( R R R ).

Deltoid during Shoulder Abduction : The glenohumeral joint is the axis ( A A A ), the deltoid tuberosity receives the muscular effort ( E E E ), and the arm weight acts as the resistance ( R R R ).

Hamstrings during Knee Flexion : The knee joint is the axis ( A A A ), the pes anserine and fibular head receive the effort ( E E E ), and the leg/foot weight provides the distal resistance ( R R R ). FIRST-CLASS LEVER (Balance/Equilibrium: MA variable)

  • [Effort] ------------ [Fulcrum/Axis] ------------ [Resistance]
  • <--- EA ---> <--- RA --->
  • SECOND-CLASS LEVER (Force Multiplier: MA > 1.0)
  • [Fulcrum/Axis] ------------ [Resistance] ------------ [Effort]
  • <--- RA --->
  • <----------------- EA ----------------->
  • THIRD-CLASS LEVER (Speed/Distance Multiplier: MA < 1.0) [Most Prevalent]
  • [Fulcrum/Axis] ------------ [Effort] ------------ [Resistance]
  • <--- EA --->
  • <----------------- RA ----------------->
  • Comparison Table of Anatomical Lever Classes

Lever Class Spatial Arrangement Mechanical Advantage Functional Trade-Off Anatomical Example Clinical Relevance

First-Class Effort - Axis - Resistance (EAR) Variable ( M A ⋛ 1 MA \gtreqless 1 M A ⋛ 1 ) Balances opposing forces; changes direction Atlanto-occipital joint (head balance by neck extensors) Vulnerable to fatigue under sustained forward head posture

Second-Class Axis - Resistance - Effort (ARE) Always > 1.0 > 1.0 > 1.0 Magnifies force; sacrifices velocity and excursion Gastrocnemius-soleus complex on MTP joints in heel raise Capable of lifting 2-3x body weight with minimal muscle mass

Third-Class Axis - Effort - Resistance (AER) Always < 1.0 < 1.0 < 1.0 Maximizes distal speed and ROM; requires high muscle force Biceps at elbow; Quadriceps at knee; Deltoid at shoulder High internal muscle tension generates high joint compressive forces

Torque, Moment Arms, and Joint Reaction Forces

Muscles produce rotational motion around joints by creating internal torque . Understanding torque mechanics allows clinicians to adapt exercises to protect healing tissues while maximizing functional recruitment.

The Mathematical Definition of Torque

Torque (rotational moment, τ \tau τ ) is the measure of the tendency of a force to produce rotation around an axis: τ = F × d ⊥ \tau = F \times d_{\perp} τ = F × d ⊥ ​

Where:

F F F is the magnitude of the applied force (in Newtons, N).

d ⊥ d_{\perp} d ⊥ ​ is the perpendicular moment arm (in meters, m), defined as the shortest perpendicular distance between the axis of rotation and the line of force action.

For a joint to remain in static equilibrium, the sum of all internal muscle torques must balance the sum of all external gravitational or applied torques: Σ τ = 0 ⟹ F muscle × d internal = F load × d external \Sigma \tau = 0 \implies F_{\text{muscle}} \times d_{\text{internal}} = F_{\text{load}} \times d_{\text{external}} Σ τ = 0 ⟹ F muscle ​ × d internal ​ = F load ​ × d external ​

Angle of Insertion and Vector Resolution

The line of action of a muscle rarely pulls at a perfect 90-degree angle to the long axis of the bone. The total muscle force vector ( F m F_m F m ​ ) is resolved into two perpendicular vector components:

Rotary Component ( F rotary = F m × sin ⁡ θ F_{\text{rotary}} = F_m \times \sin\theta F rotary ​ = F m ​ × sin θ ) : Acts perpendicular to the bone's long axis. This is the only component that produces joint rotation (torque). The rotary component reaches its maximum value when the angle of insertion θ = 90 ∘ \theta = 90^\circ θ = 9 0 ∘ ( sin ⁡ 90 ∘ = 1.0 \sin 90^\circ = 1.0 sin 9 0 ∘ = 1.0 ).

Translatory Component ( F translatory = F m × cos ⁡ θ F_{\text{translatory}} = F_m \times \cos\theta F translatory ​ = F m ​ × cos θ ) : Acts parallel to the long axis of the bone:

Stabilizing / Compressive Force : When the angle of pull is < 90 ∘ <90^\circ < 9 0 ∘ (e.g., biceps brachii when the elbow is extended to 10 ∘ − 20 ∘ 10^\circ-20^\circ 1 0 ∘ − 2 0 ∘ ), the translatory force directs the radial head into the humeroulnar and humeroradial joints, compressing and stabilizing the articular surfaces.

Dislocating / Distracting Force : When the angle of pull is > 90 ∘ >90^\circ > 9 0 ∘ (e.g., biceps brachii when the elbow is flexed beyond 100 ∘ − 110 ∘ 100^\circ-110^\circ 10 0 ∘ − 11 0 ∘ ), the translatory vector pulls the radius away from the humerus, acting as a dislocating force.

Joint Reaction Force (JRF)

Joint Reaction Force (JRF) is the net compressive and shear force generated within a joint's articular cartilage and subchondral bone. On the DHA exam, candidates must recognize that internal muscle contraction force—not the external weight of the object—is the primary contributor to joint reaction forces :

Because third-class levers operate with M A < 1 MA < 1 M A < 1 , a muscle with an internal moment arm of 4 cm lifting a 10 kg dumbbell ( 100 ~100 100 N) held 35 cm from the elbow must generate: F m = 100 N × 0.35 m 0.04 m = 875 N F_m = \frac{100 \text{ N} \times 0.35 \text{ m}}{0.04 \text{ m}} = 875 \text{ N} F m ​ = 0.04 m 100 N × 0.35 m ​ = 875 N

The resulting joint compressive reaction force across the humeroulnar joint exceeds 800 Newtons (equivalent to over 80 kg of force), even though the dumbbell weighed only 10 kg!

Clinical Takeaway : To reduce patellofemoral or glenohumeral joint reaction forces in patients with osteoarthritis or post-surgical repairs, clinicians should shorten the external moment arm (e.g., performing partial-range closed-chain squats or bent-knee leg raises rather than long-lever straight leg raises).

DHA Exam Traps & Clinical Scenarios

Warning

DHA Exam Trap #1: The Knee Paradox (Open vs. Closed Chain) : A common DHA question asks: "What is the direction of the femoral glide during closed-chain knee extension?" Many candidates remember that knee extension involves an anterior tibial glide (concave on convex) and incorrectly select anterior glide for the femur. Remember: in closed-chain knee extension (rising from a chair), the convex femoral condyles move on the fixed concave tibia , which means the femur rolls anteriorly and slides posteriorly !

Warning

DHA Exam Trap #2: The Saddle Joint Exception (1st CMC Joint) : The first carpometacarpal (trapeziometacarpal) joint of the thumb has a reciprocal saddle geometry. In the sagittal plane (flexion/extension), the metacarpal surface is concave moving on a convex trapezium (slide is in the same direction as bone movement: ulnar glide for flexion). In the frontal plane (abduction/adduction), the metacarpal is convex moving on a concave trapezium (slide is in the opposite direction: dorsal glide for abduction).

Clinical Case Scenario

A 48-year-old female secondary school teacher presents to the physiotherapy outpatient department in Dubai following 6 weeks of right shoulder immobilization in a sling after a non-displaced proximal humerus fracture. Passive range of motion reveals: abduction limited to 75° with capsular end-feel, and external rotation limited to 20°. Radiographs confirm solid bony union.

Biomechanical Analysis : The humeral head is convex and articulates within the concave glenoid fossa. Abduction requires an inferior glide of the humeral head. External rotation requires an anterior glide. However, because anterior glides challenge anterior stability, gentle posterior glides (which stretch the posterior capsule and relieve anterior superior abutment) or low-grade inferior glides are preferred initially.

Clinical Application : The physiotherapist selects Grade III inferior glides with the humerus placed at the end of available abduction (75°) to specifically stretch the inferior glenohumeral ligament and capsule, immediately followed by active-assisted abduction exercises within the restored range.