Study guide

5.2 Therapeutic Ultrasound, Phonophoresis & Diathermy

DHA Physiotherapist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview, UAE Regulatory Framework & Professional Practice

1.1 DHA Exam Structure, Sheryan Licensing & UAE PQR Requirements 1.2 UAE Healthcare Law, Informed Consent, Confidentiality & Documentation 1.3 Infection Prevention, Patient Safety & Clinical Risk Management

2 Chapter 2: Anatomy, Physiology & Tissue Healing Foundations

2.1 Musculoskeletal & Neuromuscular Anatomy Foundations 2.2 Neuroanatomy, Spinal Pathways & Pain Neurophysiology 2.3 Soft Tissue Healing Phases, Inflammation & Tissue Loading Responses

3 Chapter 3: Kinesiology, Biomechanics & Ergonomics

3.1 Joint Arthrokinematics, Osteokinematics & Lever Systems 3.2 Normal & Pathological Gait Analysis 3.3 Postural Assessment, Ergonomics & Work-Related Musculoskeletal Disorders

4 Chapter 4: Clinical Decision Making, Differential Diagnosis & Screening

4.1 Subjective History, Systems Review & Red Flag Screening 4.2 Physical Examination Sequencing, Special Tests & Diagnostic Validity 4.3 Clinical Reasoning Models, SMART Goal Setting & Outcome Measures

5 Chapter 5: Physical Agents & Thermal Modalities

5.1 Superficial Thermal Agents, Cryotherapy & Contrast Baths 5.2 Therapeutic Ultrasound, Phonophoresis & Diathermy 5.3 Mechanical Traction, Intermittent Compression & Hydrotherapy

6 Chapter 6: Electrotherapy & Photobiomodulation

6.1 TENS, Interferential Current (IFC) & Pain Modulation Mechanisms 6.2 Neuromuscular Electrical Stimulation (NMES) & Russian Current 6.3 Iontophoresis, High-Voltage Pulsed Current & Low-Level Laser Therapy

7 Chapter 7: Therapeutic Exercise Foundations & Manual Therapy

7.1 Exercise Prescription Principles: FITT, SAID & Progressive Overload 7.2 Stretching Modalities, Joint Mobilization & Manual Therapy Grades 7.3 Motor Learning Principles, Proprioception & Core Stabilization

8 Chapter 8: Musculoskeletal Rehabilitation: Spine

8.1 Cervical Spine Disorders, Whiplash & Cervical Radiculopathy 8.2 Thoracic Spine Dysfunction, Rib Mechanics & Postural Syndromes 8.3 Lumbar Spine Pathology: Disc Herniation, Stenosis & Spondylolisthesis

9 Chapter 9: Musculoskeletal Rehabilitation: Upper Extremity

9.1 Shoulder Pathology: Subacromial Impingement, Rotator Cuff & Frozen Shoulder 9.2 Elbow Disorders: Epicondylalgia & Nerve Entrapments 9.3 Wrist and Hand Conditions: Carpal Tunnel Syndrome & Tendinopathies

10 Chapter 10: Musculoskeletal Rehabilitation: Lower Extremity

10.1 Hip Disorders: Osteoarthritis, Labral Tears & Femoroacetabular Impingement 10.2 Knee Conditions: Ligamentous Tears, Meniscal Injury & Patellofemoral Pain 10.3 Foot and Ankle Conditions: Sprains, Achilles Tendinopathy & Plantar Fasciopathy

11 Chapter 11: Neurorehabilitation: Stroke, Brain Injury & Vestibular Disorders

11.1 Stroke Pathophysiology, Vascular Syndromes & Motor Assessment 11.2 Evidence-Based Stroke Rehabilitation & Task-Oriented Training 11.3 Traumatic Brain Injury & Cognitive-Motor Recovery 11.4 Vestibular Rehabilitation: BPPV, Hypofunction & Balance Retraining

12 Chapter 12: Neuromuscular Conditions & Spinal Cord Injury

12.1 Spinal Cord Injury: ASIA Impairment Scale & Autonomic Dysreflexia 12.2 Parkinson Disease: Clinical Presentation, Hoehn & Yahr Staging & Cueing 12.3 Multiple Sclerosis, Guillain-Barré Syndrome & Amyotrophic Lateral Sclerosis

13 Chapter 13: Cardiopulmonary Physical Therapy & Acute Care

13.1 Cardiopulmonary Assessment, Auscultation & Monitoring 13.2 Airway Clearance Techniques & Breathing Exercises 13.3 Phase I-III Cardiac Rehabilitation & Pulmonary Rehabilitation Protocols

14 Chapter 14: Sports Physical Therapy & Injury Prevention

14.1 Acute Sports Injury Management: PEACE & LOVE Protocol 14.2 Common Athletic Soft-Tissue Injuries & Overuse Syndromes 14.3 Return-to-Sport Testing, Functional Criteria & Injury Prevention Programs 14.4 Sport-Related Concussion: Recognition, Return-to-Learn & Graduated Return-to-Sport

15 Chapter 15: Special Populations: Pediatrics, Geriatrics & Women's Health

15.1 Pediatric Physiotherapy: Motor Milestones, Reflexes & Cerebral Palsy 15.2 Geriatric Physiotherapy: Sarcopenia, Frailty & Fall Prevention 15.3 Obstetric Physiotherapy: Pregnancy Biomechanics & Postpartum Care 15.4 Pelvic Floor Dysfunction & Urinary Incontinence Rehabilitation

5.2 Therapeutic Ultrasound, Phonophoresis & Diathermy

Key Takeaways Explain This Topic AI

Therapeutic ultrasound generates high-frequency acoustic waves via the reverse piezoelectric effect, converting alternating electrical current into mechanical oscillations using a synthetic piezoceramic crystal (lead zirconate titanate / PZT).

Acoustic frequency determines penetration depth and heating rate: 1 MHz penetrates deeply (up to 5 cm) into large muscle bellies and deep joint capsules, whereas 3 MHz is absorbed superficially (1 to 2.5 cm) at three times the heating rate of 1 MHz.

Duty cycle dictates therapeutic bio-effects: continuous ultrasound (100% duty cycle) delivers vigorous thermal heating (target tissue temperature rise 1°C–4°C), while pulsed ultrasound (typically 20% duty cycle) delivers non-thermal mechanical effects via stable cavitation and acoustic microstreaming.

Effective Radiating Area (ERA) governs treatment field size (strictly 1.5 to 2 times the ERA; max 3 to 4 times), and the Beam Non-Uniformity Ratio (BNR, ideal <5:1 or 6:1) necessitates continuous soundhead translation at 3 to 4 cm/sec to avoid periosteal burns from standing waves.

Shortwave Diathermy (27.12 MHz) heats deep tissues via capacitive plates (electric field, which preferentially heats low-water superficial adipose tissue) or inductive coils (magnetic field inducing secondary eddy currents, which selectively heats highly vascular deep skeletal muscle).

Last updated: September 2026

5.2 Therapeutic Ultrasound, Phonophoresis & Diathermy

Note

Core DHA Licensing Blueprint : Deep heating modalities sit inside Physical Agents (Electrotherapy and Hydrotherapy) , one of the ten topics DHA names in its published exam coverage. DHA lists those topics without numbering or percentage weights, so treat this material as fully examinable rather than assuming it carries a fixed share of the paper. Candidates must differentiate the mechanical acoustic physics of therapeutic ultrasound from the electromagnetic spectrum physics of shortwave diathermy (SWD). High-frequency exam questions focus on 1 MHz vs. 3 MHz penetration depths, BNR hot spot calculations, ultrasound over orthopedic implants (bone cement vs. metal), phonophoretic drug mechanics, and inductive vs. capacitive diathermy heating characteristics.

While superficial modalities heat tissues to depths of 1 to 2 cm, deep thermal agents elevate tissue temperature at depths of 3 to 5 cm or greater without causing excessive heating of overlying skin and adipose layers. Therapeutic ultrasound and shortwave diathermy represent the two definitive deep physical agents utilized in modern physiotherapy practice.

1. Ultrasound Biophysics & Sound Wave Generation

Therapeutic ultrasound delivers mechanical acoustic vibrations far above the upper threshold of human hearing (>20,000 Hz), operating clinically at frequencies between 0.75 MHz and 3.3 MHz (most commonly 1.0 MHz and 3.0 MHz ). +-----------------------------------------------------------------------------------+

  • | Reverse (Indirect) Piezoelectric Effect Generation |
  • +-----------------------------------------------------------------------------------+
  • | High-Frequency AC Electricity ───> PZT Ceramic Crystal ───> Mechanical Resonance |
  • | (1 MHz or 3 MHz Current) (Lead Zirconate (Acoustic Sound Wave |
  • | Titanate Expansion) Compression Waves) |
  • +-----------------------------------------------------------------------------------+
  • The Reverse Piezoelectric Effect

Mechanism : The ultrasound applicator contains a synthetic piezoceramic disk composed of lead zirconate titanate (PZT) . When a high-frequency alternating electrical current passes across this crystal, the crystal rapidly expands and contracts (deforms) at the exact frequency of the alternating current.

Acoustic Wave Propagation : As the crystal resonates, its mechanical vibrations compress and decompress adjacent molecular matter, transmitting longitudinal waves through biological soft tissues:

Compression (Condensation) : Areas of high molecular density and positive acoustic pressure.

Rarefaction : Areas of low molecular density and negative acoustic pressure.

Transverse (Shear) Waves : In liquids and soft tissues, ultrasound propagates purely as longitudinal waves; however, when the acoustic beam strikes rigid cortical bone, sound waves convert into transverse waves, generating localized shear stress and rapid periosteal heating.

Acoustic Attenuation and Tissue Impedance

As acoustic waves travel through bodily tissues, their energy is gradually attenuated (reduced in intensity) through absorption , reflection , and refraction :

Absorption : The conversion of acoustic mechanical energy into kinetic thermal energy. Biological tissues with high protein and collagen content exhibit the highest acoustic absorption coefficients. The absorption hierarchy from lowest to highest is: Blood < Adipose Tissue < Skeletal Muscle < Skin < Tendon/Ligament < Joint Capsule < Cortical Bone \text{Blood} < \text{Adipose Tissue} < \text{Skeletal Muscle} < \text{Skin} < \text{Tendon/Ligament} < \text{Joint Capsule} < \text{Cortical Bone} Blood < Adipose Tissue < Skeletal Muscle < Skin < Tendon/Ligament < Joint Capsule < Cortical Bone

Reflection at Acoustic Interfaces : When an acoustic wave passes from one tissue medium into another with differing acoustic impedance, a fraction of the wave is reflected:

Acoustic Impedance ( Z = ρ × c Z = \rho \times c Z = ρ × c ) is the product of tissue density ( ρ \rho ρ ) and sound propagation velocity ( c c c ).

At a soft tissue / bone interface , approximately 30% to 35% of the acoustic beam is reflected back into the periosteum, doubling local acoustic energy and creating severe periosteal heating.

At an air / transducer interface , 99.9% of the beam is reflected back into the crystal, causing instant crystal destruction. Therefore, an acoustic coupling agent (aqueous ultrasound gel, water immersion, or gel pad) is mandatory to eliminate air bubbles.

2. Ultrasound Dosing Parameters: Frequency, Duty Cycle, Intensity & BNR

Precise therapeutic dosing requires calculating four interdependent variables: frequency, duty cycle, intensity, and effective radiating area. +-----------------------------------------------------------------------------------+

  • | Ultrasound Parameter Matrix |
  • +-----------------------------------------------------------------------------------+
  • | 1. Frequency: 1 MHz (Deep: 3–5 cm) vs. 3 MHz (Superficial: 1–2.5 cm) |
  • | 2. Duty Cycle: Continuous (100% Thermal) vs. Pulsed (20% Non-thermal/Mechanical)|
  • | 3. Intensity: 0.5 – 1.0 W/cm² (Low/Pulsed) to 1.0 – 2.0 W/cm² (Vigorous Thermal)|
  • | 4. Treatment: Treatment Area = 1.5 to 2.0x ERA (Maximum 3 to 4x ERA) |
  • | 5. Speed: Soundhead Velocity = 3 to 4 cm/sec (Continuous overlapping circles)|
  • +-----------------------------------------------------------------------------------+
  • A. Frequency Selection: Depth vs. Heating Rate

1 MHz Ultrasound :

Lower frequency, longer acoustic wavelength.

Undergoes less molecular scatter and lower attenuation in superficial tissues.

Penetrates deeply into tissues at depths of 3.0 to 5.0 cm .

Clinical Target : Deep muscular bellies (gluteus maximus, quadriceps, piriformis), deep shoulder/hip capsular restrictions, lumbar paraspinals.

3 MHz (or 3.3 MHz) Ultrasound :

Higher frequency, shorter acoustic wavelength.

Attenuates very rapidly in superficial tissues; penetrates only 1.0 to 2.5 cm .

The Three-Fold Heating Rule : Because 3 MHz acoustic energy is absorbed in a much smaller tissue volume, it heats tissues approximately three (3) times faster than 1 MHz at the exact same intensity!

Clinical Rule : When switching from 1 MHz to 3 MHz, the therapist must decrease the intensity (typically 0.5 to 1.0 W/cm²) and monitor treatment time closely to avoid rapid overheating of superficial structures.

Clinical Target : Superficial tendons and ligaments (patellar tendon, Achilles tendon, lateral/medial epicondyles, wrist ligaments, plantar fascia).

B. Duty Cycle: Continuous vs. Pulsed

The duty cycle defines the percentage of total treatment time that acoustic energy is actively emitted from the soundhead: Duty Cycle (%) = Pulse Duration (On-Time) Pulse Period (Total Time [On + Off]) × 100 \text{Duty Cycle (\%)} = \frac{\text{Pulse Duration (On-Time)}}{\text{Pulse Period (Total Time [On + Off])}} \times 100 Duty Cycle (%) = Pulse Period (Total Time [On + Off]) Pulse Duration (On-Time) ​ × 100

Continuous Ultrasound (100% Duty Cycle) : Uninterrupted sound emission. Produces continuous molecular vibration, generating vigorous thermal heating :

Mild thermal (1°C rise) : Accelerates cellular metabolism, mild inflammation.

Moderate thermal (2°C to 3°C rise) : Reduces chronic pain, relieves muscle spasm, increases local blood flow.

Vigorous thermal (4°C rise) : Alters collagen viscoelasticity, increasing plastic elongation of joint capsules and tendons when paired with concurrent stretching.

Pulsed Ultrasound (Typically 20% Duty Cycle) : For example, 2 milliseconds on, 8 milliseconds off (1:4 ratio). The off-phase permits convective microvascular blood flow to dissipate accumulated heat. Produces non-thermal mechanical cellular effects without raising tissue temperature, making it the modality of choice for acute injuries, hematomas, and bone non-union.

C. Effective Radiating Area (ERA) & Treatment Field Dimensions

The Effective Radiating Area (ERA) is the total surface area of the transducer faceplate that actually transmits acoustic energy, measured in square centimeters (cm²). Because the outer periphery of the PZT crystal is clamped into the transducer casing, the ERA is always smaller than the total surface area of the soundhead .

Therapeutic Area Rule : The target treatment area must be strictly 1.5 to 2 times the ERA (maximum 3 to 4 times the ERA).

If a clinician attempts to treat an area exceeding 4 times the ERA, the acoustic energy is diluted across too large a volume, and the target tissue will never reach the therapeutic thermal threshold of 40°C–45°C.

D. Beam Non-Uniformity Ratio (BNR) & Soundhead Velocity

Ultrasound crystals do not vibrate uniformly across their entire face; acoustic energy produces peaks and troughs across the beam profile.

Beam Non-Uniformity Ratio (BNR) is the ratio of the Spatial Peak Intensity ( I S P I_{SP} I SP ​ ) to the Spatial Average Intensity ( I S A I_{SA} I S A ​ ): BNR = I Spatial Peak I Spatial Average \text{BNR} = \frac{I_{\text{Spatial Peak}}}{I_{\text{Spatial Average}}} BNR = I Spatial Average ​ I Spatial Peak ​ ​

An ideal BNR would be 1:1. Clinically acceptable devices exhibit a BNR between 2:1 and 5:1 (maximum 6:1) .

Clinical Hot Spot Calculation : If a machine has a BNR of 5:1 and the clinician sets the dial to 1.5 W/cm², the spatial peak intensity delivered to microscopic points in the tissue reaches 7.5 W/cm² ( 5 × 1.5 5 \times 1.5 5 × 1.5 )!

Soundhead Velocity : To prevent these spatial peaks from creating scorching "hot spots," unstable cavitation, or periosteal burns, the clinician must move the transducer continuously at a steady speed of 3 to 4 cm/second in overlapping circular or longitudinal strokes.

3. Non-Thermal Cellular Mechanisms: Cavitation & Microstreaming

Pulsed ultrasound (and low-intensity continuous ultrasound) triggers distinct mechanical biological phenomena at the cellular membrane level: +-----------------------------------------------------------------------------------+

  • | Non-Thermal Cellular Bio-Mechanisms |
  • +-----------------------------------------------------------------------------------+
  • | Acoustic Waves ───> Stable Cavitation ───> Microbubble Oscillation |
  • | ───> Acoustic Microstreaming ───> Membrane Shear Stress |
  • | │ |
  • | ▼ |
  • | Result: Enhanced Ca²⁺ Influx -> Mast Cell Degranulation -> Fibroblast Synthesis |
  • +-----------------------------------------------------------------------------------+

Cavitation : The formation, oscillation, and pulsation of microscopic gas-filled bubbles within bodily fluids exposed to the compression and rarefaction cycles of sound waves.

Stable Cavitation (Beneficial) : Microbubbles expand and contract rhythmically over many acoustic cycles without bursting. This dynamic pulsation stimulates acoustic microstreaming, increases cellular membrane permeability, enhances calcium ion uptake, and accelerates macrophage and fibroblast activity.

Transient / Unstable Cavitation (Destructive) : Occurs when microbubbles expand excessively during rarefaction and violently collapse during compression. The catastrophic implosion generates localized pressures exceeding 1,000 atmospheres and local temperatures of thousands of Kelvin, creating free hydroxyl radicals and causing gross cellular and endothelial destruction. Unstable cavitation occurs when intensities exceed 3.0 W/cm² or when the soundhead is held stationary.

Acoustic Microstreaming : The unidirectional movement of fluid along cell boundaries and cell membranes driven by the mechanical acoustic momentum of sound waves. Microstreaming exerts a gentle mechanical shear stress on cell membranes, altering membrane resting potential, increasing intracellular calcium flux, stimulating protein synthesis, and promoting mast cell histamine release to accelerate tissue repair.

4. Phonophoresis (Transdermal Drug Delivery)

Phonophoresis is the application of therapeutic ultrasound to drive intact pharmaceutical molecules across the stratum corneum (the primary barrier of the skin) into underlying subcutaneous soft tissues.

Biophysical Mechanism vs. Iontophoresis

Unlike iontophoresis (which requires direct electrical current and relies on electrical repulsion of charged ions), phonophoresis does not depend on the electrical charge of the medication .

Ultrasound enhances transdermal drug penetration by:

Disrupting the lipid bilayer of the stratum corneum via acoustic cavitation.

Generating localized thermal vasodilation, which increases cutaneous capillary permeability.

Creating acoustic radiation force that physically pushes drug molecules through micro-channels.

Clinical Pharmacology & Coupling Guidelines

Dexamethasone Sodium Phosphate (0.4%) : A synthetic glucocorticoid used to suppress chronic inflammation in tendinopathies, bursitis, and epicondylalgia.

Lidocaine Hydrochloride (1% to 2%) / Ketoprofen Gel : Used for localized analgesia and non-steroidal anti-inflammatory effects.

Coupling Medium Rule : Pure pharmaceutical creams (e.g., standard 10% hydrocortisone cream) contain mineral oils and emulsifiers that trap air bubbles and block acoustic wave transmission. The medication must be thoroughly mixed into, or layered beneath, a clear, degassed aqueous ultrasound coupling gel to ensure effective transmission.

5. Ultrasound Contraindications and Safety Matrix

Anatomical Region / Condition Status Pathophysiological Hazard

Pregnant Uterus / Pelvis Absolute Contraindication Cavitation and thermal stress induce teratogenic malformations and fetal damage.

Active Malignancy / Tumor Absolute Contraindication Hyperemia and microstreaming accelerate tumor growth and risk hematogenous metastasis.

Cardiac Pacemaker / ICD Absolute Contraindication Acoustic vibrations and electrical stray fields can interfere with pacemaker circuitry.

Deep Vein Thrombosis (DVT) Absolute Contraindication Mechanical shear waves can fragment the thrombus, precipitating a fatal pulmonary embolism.

Eyes and Testes Absolute Contraindication Vitreous cavitation / retinal detachment; irreversible destruction of seminiferous epithelium.

Methylmethacrylate & Polyethylene Absolute Contraindication Bone cement and polyethylene arthroplasty cups absorb ultrasound heavily, melting/loosening implants.

Growing Epiphyseal Plates Absolute Contraindication High acoustic absorption in pediatric epiphyseal cartilage risks premature physeal fusion.

Metallic Implants (Titanium/Steel) Precaution (Safe if Moving) Metal has high thermal conductivity; dissipates heat rapidly into tissues. Must keep soundhead moving!

6. Shortwave Diathermy (SWD): Capacitive vs. Inductive

Shortwave Diathermy (SWD) delivers deep therapeutic heating using high-frequency electromagnetic waves from the radiofrequency spectrum, universally assigned the medical frequency of 27.12 MHz (wavelength 11.06 meters). +-----------------------------------------------------------------------------------+

  • | Capacitive Plates vs. Inductive Coil Diathermy |
  • +-----------------------------------------------------------------------------------+
  • | CAPACITIVE METHOD (Electric Field Dominant): |
  • | Electrodes ───> Electric Field ───> Heats High-Resistance ADIPOSE TISSUE (Fat) |
  • | (Danger: Fat overheating and burns!) |
  • | |
  • | INDUCTIVE METHOD (Magnetic Field Dominant): |
  • | Cable/Drum ───> Magnetic Field ───> Induces EDDY CURRENTS in VASCULAR MUSCLE |
  • | (Deep selective heating of muscle bellies) |
  • +-----------------------------------------------------------------------------------+
  • A. Capacitive Method (Electric Field / Condenser Plates)

Mechanism : The patient's tissues are placed directly within an alternating electrostatic field between two capacitive metal plate electrodes.

Heating Pattern : As the polarity of the plates oscillates at 27.12 million cycles per second, charged dipole molecules (water) rotate rapidly. The electric field is concentrated most heavily in tissues with low electrical conductivity and high electrical impedance—specifically subcutaneous adipose tissue (fat) .

Clinical Drawback : Overheating of superficial adipose tissue occurs before therapeutic temperatures can be achieved in underlying skeletal muscle, creating a high risk of fat necrosis and skin burns.

B. Inductive Method (Magnetic Field / Cable & Drum Applicators)

Mechanism : An alternating electrical current flows through an insulated coiled cable or hinged drum applicator, generating an oscillating magnetic field perpendicular to the coil.

Eddy Currents (Foucault Currents) : This magnetic field penetrates effortlessly through superficial subcutaneous fat without significant attenuation and induces closed-loop circulating electrical currents ( eddy currents ) in deeper tissues.

Heating Pattern : Eddy currents flow preferentially through tissues with high electrical conductivity, high electrolyte content, and high water concentrations—specifically deep vascular skeletal muscle, synovial fluid, and joint capsules .

Clinical Superiority : Inductive diathermy achieves profound, uniform heating of deep musculature (up to 3–5 cm depth) while sparing overlying adipose tissue.

C. Diathermy Contraindications and Environmental Safety

ANY Metallic Implants or Hardware : Surgical plates, screws, pins, shrapnel, and wire sutures concentrate electromagnetic lines of force, causing extreme localized induction heating and catastrophic internal tissue burns.

Cardiac Pacemakers & Neural Stimulators : Electromagnetic interference (EMI) disrupts, reprograms, or permanently destroys internal circuitry. Therapists and patients with pacemakers must maintain a clearance distance of at least 3 to 5 meters from active SWD units.

Intrauterine Devices (IUDs) : Copper-containing IUDs absorb electromagnetic fields, causing localized uterine tissue heating and displacement.

Perspiration and Wet Dressings : Water has high dielectric permittivity and absorbs radiofrequency energy rapidly. Perspiration droplets on skin pool heat, creating scalding surface burns. The skin must be thoroughly dried and covered with a single dry terrycloth towel to absorb moisture during treatment.

  • 7. Clinical Scenarios & DHA Exam Traps
  • Clinical Case Scenario: Patellar Tendinopathy Dosing

A 24-year-old volleyball player presents with chronic patellar tendinopathy. The tendon is thickened and tender at the inferior pole of the patella (depth 0.8 to 1.5 cm). The therapist chooses therapeutic ultrasound.

Parameter Rationale :

Frequency: 3 MHz (depth < 2.5 cm; 1 MHz would penetrate too deeply into the joint capsule/femoral condyle).

Duty Cycle: Continuous (100%) if the goal is thermal remodeling and increasing collagen extensibility prior to eccentric loading, or 20% pulsed if treating during an acute inflammatory flare.

Intensity: Set to 0.5 to 1.0 W/cm² (recognizing that 3 MHz heats three times faster than 1 MHz).

ERA and Speed: The patellar tendon is small (~4 cm²); a soundhead with an ERA of 2 to 3 cm² is selected. The soundhead is translated continuously at 3 to 4 cm/sec.

DHA Exam Traps to Avoid

Warning

DHA Exam Trap #1: Ultrasound over Metal vs. Bone Cement : Do not confuse surgical implants! Ultrasound over a metallic titanium plate or screw is safe provided the transducer is kept moving, because metal conducts heat away rapidly. However, ultrasound directly over methylmethacrylate bone cement or high-density polyethylene joint components is absolutely contraindicated because plastics absorb acoustic energy voraciously, resulting in thermal melting and total joint loosening!

Warning

DHA Exam Trap #2: Diathermy Applicator Selection : Prometric questions frequently ask: "Which diathermy applicator is indicated to selectively heat the deep quadriceps muscle in an obese patient?" The answer is Inductive drum or coil (magnetic eddy currents selectively heat vascular muscle). Selecting capacitive plates in an obese patient will cook the superficial adipose layer!