Study guide

1.4 Alabama's PSI-Delivered WPI Exams: Format, Grade Crosswalk & Need-to-Know Blueprints

Alabama Water/Wastewater Operator Certification Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Alabama Regulations, Certification, Exams & Utility Administration

1.1 ADEM Division 335-10-1: Facility Classifications, Grades & Staffing Rules 1.2 Becoming Certified in Alabama: Exam Application, Operator Intern Status, Experience, Renewal & CEHs 1.3 Environmental Compliance, SDWA, Clean Water Act & NPDES Permits 1.4 Alabama's PSI-Delivered WPI Exams: Format, Grade Crosswalk & Need-to-Know Blueprints 1.5 ADEM Drinking-Water Operating Rules (Division 335-7): Control Tests, Residuals, Pressure, Cross-Connections & Records 1.6 Utility Administration: SOPs, Records, Security, Cybersecurity, Emergency Planning & Supervision

2 Chapter 2: Source Water, Wells, Coagulation, Filtration & Membranes

2.1 Source Water Hydrology, Groundwater vs. Surface Water & Protection 2.2 Coagulation Chemistry, Coagulants & Rapid Mixing Mechanics 2.3 Flocculation Basin Design, Clarification & Sedimentation 2.4 Granular Media Filtration, Head Loss & Backwash Protocols 2.5 Membrane Filtration: MF, UF, NF & RO Operation, Integrity Testing and Cleaning 2.6 Wells & Groundwater Systems: Construction, Pumps, Testing and Sanitary Protection (ADEM 335-7-5)

3 Chapter 3: Water Disinfection, Chemical Addition, Stabilization & Residuals

3.1 Chlorination Chemistry, Breakpoint Chlorination & Residuals 3.2 Disinfection Byproducts (DBPs), Stage 1/2 Rules & CT Compliance 3.3 Corrosion Control, Lead and Copper Rule & Fluoridation 3.4 Iron/Manganese Removal, Water Softening & Taste/Odor Control 3.5 Water Treatment Residuals: Sludge, Backwash Recycle & Plant Discharges

4 Chapter 4: Wastewater Preliminary & Primary Treatment

4.1 Wastewater Characteristics, Screening, Shredding & Grit Removal 4.2 Primary Sedimentation Basins, Scum Removal & Clarifier Performance

5 Chapter 5: Secondary Biological Treatment: Activated Sludge

5.1 Activated Sludge Microbiology, Basin Configurations & Aeration Systems 5.2 Process Control: F/M Ratio, MCRT/SRT & Sludge Settling Characteristics 5.3 Operational Troubleshooting (Bulking, Foaming, Pin Floc) & Process Modifications

6 Chapter 6: Fixed-Film Treatment, Lagoons, Nutrient Removal, Tertiary Filtration & Disinfection

6.1 Trickling Filters & Rotating Biological Contactors (RBCs) 6.2 Waste Stabilization Ponds, Aerated Lagoons & Alabama Grade I Lagoon Operations 6.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal 6.4 Tertiary Filtration & Membrane Bioreactors (MBRs) 6.5 Wastewater Disinfection & Dechlorination: Chlorine, UV and Ozone

7 Chapter 7: Sludge Treatment, Biosolids & Odor Control

7.1 Sludge Thickening, Aerobic Digestion & Anaerobic Digestion 7.2 Mechanical Dewatering, Polymer Conditioning & EPA 503 Biosolids Regulations 7.3 Odor Control & Wastewater Chemical Addition

8 Chapter 8: Water Distribution Systems, Installation, Metering & Water Loss

8.1 Distribution Piping Materials, Valves & Finished Water Storage Facilities 8.2 Water Main Flushing, Disinfection Protocols (AWWA C651) & Water Quality Maintenance 8.3 Distribution Hydraulics, Pressure Control & Cross-Connection Prevention 8.4 Main & Service Installation, Tapping, Repair and Utility Locating (Alabama 811) 8.5 Meters, Water Loss Control, Asset Management & Customer Service

9 Chapter 9: Wastewater Collection Systems, Lift Stations & Sewer Maintenance

9.1 Gravity Collection Networks, Manhole Construction & Self-Cleansing Velocity Standards 9.2 Wastewater Lift Stations, Submersible Pumps, Force Mains & Inflow/Infiltration (I&I) 9.3 Sewer Cleaning, CCTV Inspection & SSO Response

10 Chapter 10: Laboratory Procedures, Sampling & Environmental Compliance

10.1 Drinking Water Laboratory Analysis: Turbidity, pH, Alkalinity & Coliform Testing 10.2 Wastewater Laboratory Testing: BOD5, COD, Total Suspended Solids & Settleability 10.3 Representative Sampling Protocols, Preservation, Chain of Custody & QA/QC

11 Chapter 11: Plant Equipment, Pumps, Motors & Instrumentation

11.1 Centrifugal and Positive Displacement Pumps: Operation, Cavitation & Packing/Seals 11.2 Electric Motors, Variable Frequency Drives, Flow Meters & SCADA Systems

12 Chapter 12: Safety: Chemicals, Confined Spaces & Field Hazards

12.1 Chemical Safety: Chlorine Gas Emergency Handling (Kits A & B) & Hydrogen Sulfide (H2S) Hazards 12.2 Permit-Required Confined Space Entry, Lockout/Tagout (LOTO) & Personal Protective Equipment 12.3 Field Safety: Work-Zone Traffic Control, Electrical Hazards, Fall Protection & Hazard Communication

13 Chapter 13: Water & Wastewater Mathematics: Hydraulics, Chemical Feed & Pumping

13.1 Flow Conversions, Geometry, Tank Volume & Detention Time Calculations 13.2 The Pounds Formula, Chemical Feed Rates & Solution Concentration Calculations 13.3 Pumping Math: Total Dynamic Head, Horsepower, Efficiency & Power Cost

14 Chapter 14: Water & Wastewater Mathematics: Treatment Process Calculations

14.1 Clarifier Surface Overflow Rate, Weir Loading & Granular Filter Loading Rates 14.2 Biological Calculations: F/M Ratio, MCRT Solids Balance & Sludge Volume Index (SVI)

1.4 Alabama's PSI-Delivered WPI Exams: Format, Grade Crosswalk & Need-to-Know Blueprints

Key Takeaways Explain This Topic AI

ADEM states that all Alabama certification exams are standardized national exams administered by PSI, and the revised 2025 WPI exams went live at PSI on August 1, 2025.

Alabama Water Grade I uses the WPI Water Distribution Class I exam, Water Grade II uses WPI Water Treatment Class 1, Water Grade III uses Class 2 and Water Grade IV uses Class 4.

Wastewater Grades I through IV use WPI Wastewater Treatment Classes 1 through 4, and Wastewater 1C uses WPI Wastewater Collection Class I.

Each WPI exam has 100 scored four-option questions plus up to 10 unscored pretest questions; PSI schedules 180 minutes for Grades 1, 1C, 2 and 3 and 240 minutes for Grade 4.

PSI provides the WPI formula and conversion sheet and allows a silent, non-programmable calculator without alpha keys, such as a TI-30X IIS; graphing calculators are not allowed.

Last updated: October 2026

1.4 Alabama's PSI-Delivered WPI Exams: Format, Grade Crosswalk & Need-to-Know Blueprints

ADEM's Exam Resources page states plainly: "All of Alabama's certification exams are standardized national exams administered by PSI." The exams are written by Water Professionals International (WPI) , the organization formerly known as the Association of Boards of Certification (ABC). In 2025 WPI revised its standardized exams; ADEM announced that the revised Alabama exams went live at PSI test centers on August 1, 2025 , and it now links the 2025 Need-to-Know Criteria (NTK) for every grade. ADEM's September 2025 program update reported that early pass rates on the revised exams were improving.

Because the questions are national, most of what you study is standard operator practice. The Alabama rules in Sections 1.1 to 1.3, 1.5 and 1.6 matter because they decide your grade, your experience path and how you run a plant, and because the NTKs test regulatory compliance and record keeping in general terms.

The Nine Alabama Exams and Their WPI Blueprints

PSI's Alabama program lists nine exams: Water Operator Grades 1, 2, 3 and 4 and Wastewater Operator Grades 1, 1C, 2, 3 and 4 . ADEM's NTK links show which WPI exam each one uses. Note the shift on the water treatment side: Alabama has no Grade I water treatment certificate, so Alabama Water Grade II uses the WPI Class 1 treatment exam.

Alabama exam WPI exam used Content areas (scored questions) Calculation items

Water Grade I (distribution) Water Distribution Class I Distribution System Components (35); Equipment Installation, Operation, Maintenance and Repair (30); Water Quality Monitoring, Evaluation, Adjustment and Laboratory (15); Security, Safety, Administrative Procedures and Public Interactions (20) 9

Water Grade II (basic groundwater) Water Treatment Class 1 Treatment Process (31); Laboratory Analysis (16); Equipment Operation and Maintenance (26); Source Water Characteristics (15); Security, Safety and Administrative Procedures (12) 10

Water Grade III (advanced groundwater) Water Treatment Class 2 Treatment Process (32); Laboratory Analysis (16); Equipment O&M (24); Source Water Characteristics (15); Security, Safety and Administrative Procedures (13) 10

Water Grade IV (surface water) Water Treatment Class 4 Treatment Process (35); Laboratory Analysis (17); Equipment O&M (20); Source Water Characteristics (14); Security, Safety and Administrative Procedures (14) 15

Wastewater Grade I (lagoons) Wastewater Treatment Class 1 Equipment Evaluation, Maintenance and/or Operation (39); Treatment Process Evaluation and Adjustment (38); Laboratory Analysis (10); Security, Safety and Administrative Procedures (13) 10

Wastewater Grade II Wastewater Treatment Class 2 Equipment (37); Treatment Process (40); Laboratory (10); Security, Safety and Administrative (13) 12

Wastewater Grade III Wastewater Treatment Class 3 Equipment (30); Treatment Process (40); Laboratory (15); Security, Safety and Administrative (15) 14

Wastewater Grade IV Wastewater Treatment Class 4 Equipment (28); Treatment Process (42); Laboratory (15); Security, Safety and Administrative (15) 16

Wastewater 1C (collection) Wastewater Collection Class I Equipment Operation, Evaluation and Maintenance (27); Collection System Operation, Maintenance and Restoration (27); Lift Station Operation and Maintenance (18); Collection System Monitoring, Evaluation and Adjustment (14); Security, Safety and Administrative Procedures (14) 10

Two patterns stand out. First, the Grade I lagoon exam is not a lagoon-only exam : WPI Wastewater Treatment Class 1 covers preliminary treatment, ponds, activated sludge basics, fixed film, disinfection, solids handling and laboratory work. Second, the higher wastewater classes shift weight toward treatment process evaluation and adjustment , so Grade III and IV candidates should expect many "what should the operator do next" questions.

How the Questions Are Built

Every NTK describes the same structure:

100 scored questions with four answer choices (A through D).

Up to 10 unscored pretest questions scattered through the exam. You cannot tell which ones they are, so answer every question carefully.

Two cognitive levels. Recall items ask you to identify facts and procedures. Application items ask you to calculate, interpret data or choose an action. On the WPI Wastewater Treatment Class 4 exam, for example, the NTK's content-area counts add up to 75 application items and 25 recall items.

Calculation items appear in US customary units with metric units in parentheses, and each can be solved in either system.

Each NTK lists primary and secondary references for every content area, such as the California State University, Sacramento (Office of Water Programs) operation manuals, the Water Environment Federation's Wastewater Treatment Fundamentals series and AWWA publications.

Exam Day at PSI

ADEM's PSI candidate information and the PSI Alabama test listings set these rules:

Scheduling. Exams are given by appointment, Monday through Saturday, at PSI centers in Alabama and at more than 300 PSI centers nationwide. ADEM notes that an Alabama candidate may test at any PSI center that lists the Alabama exam, even outside the state.

Time. PSI schedules 180 minutes for Water Grades 1–3 and Wastewater Grades 1, 1C, 2 and 3, and 240 minutes for Water Grade 4 and Wastewater Grade 4. The on-screen clock keeps running during breaks.

Identification. Bring two forms of ID: a current government-issued photo ID with signature and a second ID with name and signature. Arriving more than 15 minutes late forfeits the appointment and fees.

Rescheduling. You may reschedule once at no charge if you contact PSI at least two business days before the appointment.

Materials. PSI provides pencils, the WPI formula and conversion sheet , and one sheet of scratch paper at a time, which must be returned. You may bring a silent, non-programmable calculator without alpha keys or printing capability ; scientific calculators such as the TI-30X IIS are allowed and graphing calculators are not. Phones, watches, hats, notes and recording devices are prohibited.

Navigation. A practice session before the timed exam does not count against your time. You can skip, bookmark and return to questions and change answers until time expires.

Results. You learn at the test center whether you passed with a score of 70 or higher ; the result flows into OpCert Online.

Turning the Blueprint into a Study Plan

Find your row in the crosswalk table and print that NTK from ADEM's Exam Resources page.

Weight your time by question count. A Grade IV wastewater candidate should spend roughly 42 percent of study time on process evaluation and adjustment (Chapters 4–7 of this guide), 28 percent on equipment (Chapters 9 and 11), and the rest on laboratory work and safety and administration (Chapters 1, 10 and 12).

Practice calculations with the formula sheet so you recognize which formulas are provided and which conversions you must remember (Chapters 13 and 14).

Learn the action questions. Most application items describe a symptom, such as a rising sludge blanket or a filter breakthrough, and ask for the best first operator response.