Study guide
7.2 Mechanical Dewatering, Polymer Conditioning & EPA 503 Biosolids Regulations
Alabama Water/Wastewater Operator Certification Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Alabama Regulations, Certification, Exams & Utility Administration
1.1 ADEM Division 335-10-1: Facility Classifications, Grades & Staffing Rules 1.2 Becoming Certified in Alabama: Exam Application, Operator Intern Status, Experience, Renewal & CEHs 1.3 Environmental Compliance, SDWA, Clean Water Act & NPDES Permits 1.4 Alabama's PSI-Delivered WPI Exams: Format, Grade Crosswalk & Need-to-Know Blueprints 1.5 ADEM Drinking-Water Operating Rules (Division 335-7): Control Tests, Residuals, Pressure, Cross-Connections & Records 1.6 Utility Administration: SOPs, Records, Security, Cybersecurity, Emergency Planning & Supervision
2 Chapter 2: Source Water, Wells, Coagulation, Filtration & Membranes
2.1 Source Water Hydrology, Groundwater vs. Surface Water & Protection 2.2 Coagulation Chemistry, Coagulants & Rapid Mixing Mechanics 2.3 Flocculation Basin Design, Clarification & Sedimentation 2.4 Granular Media Filtration, Head Loss & Backwash Protocols 2.5 Membrane Filtration: MF, UF, NF & RO Operation, Integrity Testing and Cleaning 2.6 Wells & Groundwater Systems: Construction, Pumps, Testing and Sanitary Protection (ADEM 335-7-5)
3 Chapter 3: Water Disinfection, Chemical Addition, Stabilization & Residuals
3.1 Chlorination Chemistry, Breakpoint Chlorination & Residuals 3.2 Disinfection Byproducts (DBPs), Stage 1/2 Rules & CT Compliance 3.3 Corrosion Control, Lead and Copper Rule & Fluoridation 3.4 Iron/Manganese Removal, Water Softening & Taste/Odor Control 3.5 Water Treatment Residuals: Sludge, Backwash Recycle & Plant Discharges
4 Chapter 4: Wastewater Preliminary & Primary Treatment
4.1 Wastewater Characteristics, Screening, Shredding & Grit Removal 4.2 Primary Sedimentation Basins, Scum Removal & Clarifier Performance
5 Chapter 5: Secondary Biological Treatment: Activated Sludge
5.1 Activated Sludge Microbiology, Basin Configurations & Aeration Systems 5.2 Process Control: F/M Ratio, MCRT/SRT & Sludge Settling Characteristics 5.3 Operational Troubleshooting (Bulking, Foaming, Pin Floc) & Process Modifications
6 Chapter 6: Fixed-Film Treatment, Lagoons, Nutrient Removal, Tertiary Filtration & Disinfection
6.1 Trickling Filters & Rotating Biological Contactors (RBCs) 6.2 Waste Stabilization Ponds, Aerated Lagoons & Alabama Grade I Lagoon Operations 6.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal 6.4 Tertiary Filtration & Membrane Bioreactors (MBRs) 6.5 Wastewater Disinfection & Dechlorination: Chlorine, UV and Ozone
7 Chapter 7: Sludge Treatment, Biosolids & Odor Control
7.1 Sludge Thickening, Aerobic Digestion & Anaerobic Digestion 7.2 Mechanical Dewatering, Polymer Conditioning & EPA 503 Biosolids Regulations 7.3 Odor Control & Wastewater Chemical Addition
8 Chapter 8: Water Distribution Systems, Installation, Metering & Water Loss
8.1 Distribution Piping Materials, Valves & Finished Water Storage Facilities 8.2 Water Main Flushing, Disinfection Protocols (AWWA C651) & Water Quality Maintenance 8.3 Distribution Hydraulics, Pressure Control & Cross-Connection Prevention 8.4 Main & Service Installation, Tapping, Repair and Utility Locating (Alabama 811) 8.5 Meters, Water Loss Control, Asset Management & Customer Service
9 Chapter 9: Wastewater Collection Systems, Lift Stations & Sewer Maintenance
9.1 Gravity Collection Networks, Manhole Construction & Self-Cleansing Velocity Standards 9.2 Wastewater Lift Stations, Submersible Pumps, Force Mains & Inflow/Infiltration (I&I) 9.3 Sewer Cleaning, CCTV Inspection & SSO Response
10 Chapter 10: Laboratory Procedures, Sampling & Environmental Compliance
10.1 Drinking Water Laboratory Analysis: Turbidity, pH, Alkalinity & Coliform Testing 10.2 Wastewater Laboratory Testing: BOD5, COD, Total Suspended Solids & Settleability 10.3 Representative Sampling Protocols, Preservation, Chain of Custody & QA/QC
11 Chapter 11: Plant Equipment, Pumps, Motors & Instrumentation
11.1 Centrifugal and Positive Displacement Pumps: Operation, Cavitation & Packing/Seals 11.2 Electric Motors, Variable Frequency Drives, Flow Meters & SCADA Systems
12 Chapter 12: Safety: Chemicals, Confined Spaces & Field Hazards
12.1 Chemical Safety: Chlorine Gas Emergency Handling (Kits A & B) & Hydrogen Sulfide (H2S) Hazards 12.2 Permit-Required Confined Space Entry, Lockout/Tagout (LOTO) & Personal Protective Equipment 12.3 Field Safety: Work-Zone Traffic Control, Electrical Hazards, Fall Protection & Hazard Communication
13 Chapter 13: Water & Wastewater Mathematics: Hydraulics, Chemical Feed & Pumping
13.1 Flow Conversions, Geometry, Tank Volume & Detention Time Calculations 13.2 The Pounds Formula, Chemical Feed Rates & Solution Concentration Calculations 13.3 Pumping Math: Total Dynamic Head, Horsepower, Efficiency & Power Cost
14 Chapter 14: Water & Wastewater Mathematics: Treatment Process Calculations
14.1 Clarifier Surface Overflow Rate, Weir Loading & Granular Filter Loading Rates 14.2 Biological Calculations: F/M Ratio, MCRT Solids Balance & Sludge Volume Index (SVI)
7.2 Mechanical Dewatering, Polymer Conditioning & EPA 503 Biosolids Regulations
Key Takeaways Explain This Topic AI
Mechanical dewatering converts liquid sludge (2–6% TS) into spadeable cake (18–35% TS), dramatically reducing transportation weight and disposal volume through belt filter presses, decanter centrifuges, or drying beds.
A belt filter press dewaters through three distinct sequential zones: chemical conditioning, gravity drainage (chicanes/plows releasing free water), and low-pressure wedge followed by high-pressure shear rollers ( P = T / R P = T / R P = T / R ).
Synthetic cationic polyacrylamides neutralize negative colloidal surface charges (zeta potential) and bridge microflocs; proper emulsion inversion and 30–60 minute aging are vital to avoid cloth blinding or washout.
Under EPA 40 CFR Part 503, Class A biosolids require pathogen reduction to <1,000 MPN/g fecal coliform or <3 MPN/4g Salmonella via Processes to Further Reduce Pathogens (PFRP), permitting unrestricted public distribution.
Class B biosolids allow <2,000,000 MPN/g fecal coliform via Processes to Significantly Reduce Pathogens (PSRP) but impose strict regulatory site restrictions on animal grazing (30 days), public access, and crop harvesting (14–38 months).
Last updated: October 2026
7.2 Mechanical Dewatering, Polymer Conditioning & EPA 503 Biosolids Regulations
Following biological stabilization in aerobic or anaerobic digesters, residuals remain a liquid slurry containing 94% to 98% water. Mechanical dewatering is the physical unit operation used to strip free and interstitial water from stabilized solids, yielding a semi-solid, spadeable "cake" containing 18% to 35% total dry solids. Dewatering drastically reduces the weight and volume of material requiring transport, reduces disposal tipping fees, enables autogenous combustion during incineration, and prepares biosolids for agricultural land application or municipal landfilling.
1. Sludge Moisture Classifications & Dewatering Mechanics
Water associated with wastewater sludges exists in four distinct physical states, each requiring progressively higher energy and mechanical or chemical intervention to remove: Sludge Water Distribution:
- ┌────────────────────────────────────────────────────────────────────────┐
- │ Free Bulk Water (65–75%) │ --> Removed by Gravity Drainage
- ├───────────────────────────────────────┬────────────────────────────────┤
- │ Interstitial / Capillary Water (15–25%)│ Inter-floc water │ --> Removed by Mechanical Shear / Squeeze
- ├───────────────────────────────────────┴──────┬─────────────────────────┤
- │ Surface / Vicinal Water (5–10%) │ Colloidal boundary │ --> Released by Polymer Neutralization
- ├──────────────────────────────────────────────┴──────────┬──────────────┤
- │ Intracellular / Bound Water (2–5%) │ Cell plasma │ --> Released only by Thermal Lysis
- └─────────────────────────────────────────────────────────┴──────────────┘
Free (Bulk) Water: Water not associated with organic particles; drains freely by gravity on porous mesh.
Interstitial (Capillary) Water: Water trapped within the internal pores and crevices of biological flocs; released by mechanical compression, squeezing, and roller shearing.
Surface (Vicinal) Water: Water held tightly to the colloidal particle surfaces by hydrogen bonding and electrostatic attraction; released through chemical coagulation and polymer charge neutralization.
Intracellular (Bound) Water: Water encapsulated inside intact microbial cell walls; cannot be removed by mechanical means (only released through thermal cell lysis or high-temperature drying).
2. Mechanical Dewatering Technologies
Treatment facilities evaluate mechanical dewatering technologies based on required cake dryness, throughput capacity, energy consumption, polymer demand, and odor containment.
Dewatering Technology Operating Mechanism Typical Cake Solids (% TS) Solids Capture Efficiency Polymer Dose (lb active/ton DS) Major Operational Advantages Primary Operational Trade-offs
Belt Filter Press (BFP) Continuous porous belts moving through gravity, wedge, and serpentine shear rollers 18% – 25% 93% – 97% 12 – 25 lb/ton Low power consumption; low rotational speed; easy visual observation of flocculation. Open design generates mist/odors; continuous belt washwater requirement (80–100 psi).
Solid Bowl Decanter Centrifuge High-speed spinning bowl (2,000–3,500 rpm) generating 1,500–3,000 G-forces with internal scroll 20% – 30% 95% – 98% 15 – 30 lb/ton Fully enclosed (exceptional odor and pathogen control); compact footprint; handles oily sludges. High electrical power consumption; high noise levels; abrasive wear on scroll flight tiles.
Recessed Chamber Filter Press High-pressure hydraulic batch press (100–225 psi) pumping slurry into recessed plate chambers 30% – 45% 98% – 99.5% 10 – 20 lb/ton (or lime + ferric) Produces exceptionally dry cake; optimal for thermal drying or incineration. Batch operation; labor-intensive cake discharge; high initial capital equipment cost.
Sand Drying Beds Gravity drainage through sand/gravel underdrain followed by solar evaporation 30% – 40% (climate dependent) >98% Typically zero (or low polymer) Minimal mechanical maintenance; zero chemical or power costs during unconditioned drying. Enormous land footprint; weather dependent (rainfall/humidity); highly labor-intensive removal.
Belt Filter Press (BFP) Mechanics
A Belt Filter Press processes conditioned sludge continuously across three distinct engineering zones: Belt Filter Press Flow Path:
- Sludge + Polymer ───> [Gravity Drainage Zone] (Plows furrow sludge, frees bulk water)
- │
- ▼
- [Low-Pressure Wedge Zone] (Belts converge gently, sandwiching sludge)
- │
- ▼
- [High-Pressure Shear Zone] (Belts wrap over decreasing diameter rollers)
- │
- ▼
- [Cake Discharge] (Doctor blades scrape 18-25% TS cake)
Gravity Drainage Zone: Flocculated sludge is distributed uniformly over a traveling horizontal porous polyester woven belt. Adjustable Teflon furrowing plows (chicanes) roll and turn the sludge, carving open drainage channels that release 65% to 75% of the free water within 1 to 2 minutes, thickening the slurry from 2–4% to 8–12% total solids .
Low-Pressure Wedge Zone: The top and bottom belts converge at a gentle angle. The thickened sludge is gradually sandwiched between the belts under low pressure, consolidating the matrix and expelling interstitial water without squirting sludge out the belt edges.
High-Pressure Shear Zone: The sandwiched belts travel in a serpentine path around a series of perforated and solid rollers of progressively decreasing diameter. The compressive and shearing forces applied to the sludge are governed by the belt tension ( T T T ) and roller radius ( R R R ): P = T R P = \frac{T}{R} P = R T
Because roller diameter decreases along the belt path, the applied shear and compressive pressure ( P P P ) steadily increases, driving out tightly held interstitial water. Heavy-duty doctor blades scrape the 18% to 25% cake from the belts at the discharge point.
Solid Bowl Decanter Centrifuge Mechanics
A decanter centrifuge consists of a solid cylindrical-conical steel bowl rotating at 2,000 to 3,500 rpm, generating an artificial gravitational field 1,500 to 3,000 times gravity (G-force) . Inside the bowl, an independent helical screw conveyor (scroll) rotates in the same direction but at a slightly different speed (differential speed of 1 to 20 rpm):
Clarification / Liquid Pool Zone: Sludge and polymer enter through an axial feed tube into the center hub. High G-force instantly drives dense solid particles against the inner bowl perimeter, forming a compacted cake layer. Clarified liquid (centrate) flows toward the cylindrical end and overflows adjustable weir plates.
Conical Drying Beach: The helical scroll continuously conveys the settled solids toward the tapered conical end (the beach). As the cake is dragged up the inclined beach above the liquid pool depth, centrifugal force wrings surface moisture out of the cake before it ejects through discharge ports into a hopper.
Process Adjustments: Increasing bowl speed enhances G-force and solids capture efficiency. Decreasing differential scroll speed increases solids residence time on the beach, producing a drier cake, but increases the risk of torque overload.
Loading diagram... Belt Filter Press Dewatering Zones & Biosolids Regulatory Matrix
3. Polymer Conditioning Chemistry & Operational Optimization
Wastewater sludge particles are colloidal biological suspensions that carry a net negative surface charge (zeta potential between -10 mV and -30 mV), largely due to ionized carboxyl ( − C O O − -COO^- − CO O − ) and phosphate ( − P O 4 3 − -PO_4^{3-} − P O 4 3 − ) groups on bacterial cell walls and extracellular polymeric substances (EPS). This uniform negative charge generates electrostatic repulsive forces that prevent particles from aggregating.
Flocculation Mechanisms
To destabilize the suspension, utilities dose high-molecular-weight cationic synthetic polymers (polyacrylamides):
Charge Neutralization: Positively charged quaternary amine sites on the polymer chain adsorb onto the negatively charged sludge colloids, collapsing the repulsive electrical double layer and reducing zeta potential toward zero.
Interparticle Polymer Bridging: Long-chain polymer molecules (molecular weights between 5 and 20 million Daltons) adsorb onto multiple sludge particles simultaneously, forming massive, shear-resistant three-dimensional macroflocs that release trapped water.
Emulsion Polymer Preparation & Aging
Liquid emulsion polymers consist of active polymer coils suspended inside microscopic mineral oil droplets with an emulsifying surfactant:
Polymer Inversion: When neat emulsion polymer is blended with water, the surfactant dissolves into the bulk water phase, forcing the oil droplets to invert. This process requires an intense initial flash-mixing shear zone (water velocity >10 ft/s) to disperse the polymer without forming undissolved gel balls ("fish-eyes").
Aging & Uncoiling: Following inversion, the polymer must undergo gentle, low-shear aging in a retention tank for 30 to 60 minutes . This aging window allows the coiled polymer chains to fully hydrate and unwind into long linear strands capable of bridging flocs.
Dilution Stages: Primary neat polymer is diluted with potable water to a 0.5% to 1.0% solution in the batch tank, followed by secondary in-line post-dilution down to 0.1% to 0.2% immediately upstream of the sludge injection point to optimize chemical dispersion.
Dosing Diagnostics and Troubleshooting
Operational Symptom Root Cause Underlying Mechanism Corrective Action
Runny, sloppy cake; dirty filtrate; belt blinding Underdosing Inadequate charge neutralization leaves colloidal particles unattached; free water cannot drain through the gravity table, creating excessive liquid volume in the wedge zone. Incrementally increase polymer feed rate; check polymer aging tank retention; verify calibration of chemical feed pump.
Shiny, gelatinous cake; belt slippage; severe foaming Overdosing Excess unattached polymer molecules coat the filter fabric, blinding the porous weave; slimy polymer lubricates drive rollers, causing belts to slip out of tracking alignment. Reduce polymer pump feed rate; inspect fabric washwater spray headers; run high-pressure wash nozzles with hot water or detergent.
Flocs shear apart before entering wedge zone Excessive Mixing Shear High-energy turbulence downstream of the injection point mechanically ruptures the fragile polymer bridges formed in the conditioning tank. Move polymer injection point closer to dewatering unit; decrease speed of in-line variable-speed flocculating mixer.
Uneven cake thickness across belt width Poor Sludge Distribution Feed distributor box is fouled with rags or tilted, funneling slurry toward one edge of the gravity table. Clean feed distributor weir; clear rags and debris; level the distribution chute.
4. EPA 40 CFR Part 503 Biosolids Regulations
The federal EPA 40 CFR Part 503 rule establishes comprehensive standards for the beneficial use and final disposal of sewage sludge (biosolids). The regulation classifies biosolids according to pathogen reduction efficacy, vector attraction reduction performance, and trace heavy metal concentrations.
Pathogen Reduction Standards: Class A vs. Class B
Regulatory Category Microbial Density Standard Required Treatment Processes Land Application Eligibility & Restrictions
Class A Biosolids Fecal Coliform: < 1,000 MPN per gram of total dry solids, OR Salmonella: < 3 MPN per 4 grams of total dry solids. Processes to Further Reduce Pathogens (PFRP): Thermophilic Composting (windrow ≥ 55 ∘ C \ge 55^\circ\text{C} ≥ 5 5 ∘ C for 15 days with 5 turnings; static pile ≥ 55 ∘ C \ge 55^\circ\text{C} ≥ 5 5 ∘ C for 3 days); Heat Drying (moisture <10%, particle temp > 80 ∘ C 80^\circ\text{C} 8 0 ∘ C ); Thermophilic Aerobic Digestion (55–60°C for 10 days); Pasteurization ( ≥ 70 ∘ C \ge 70^\circ\text{C} ≥ 7 0 ∘ C for 30 minutes); Beta/Gamma Irradiation. Unrestricted Public Distribution: Can be applied to residential lawns, home vegetable gardens, public parks, and sold or given away in bags. No site access or harvesting restrictions apply.
Class B Biosolids Fecal Coliform: < 2,000,000 MPN per gram of total dry solids (geometric mean of 7 representative samples). Processes to Significantly Reduce Pathogens (PSRP): Standard Anaerobic Digestion (15 days at 35–55°C, or 60 days at 20°C); Standard Aerobic Digestion (40 days at 20°C, or 60 days at 15°C); Lime Stabilization (raise pH to ≥ 12 \ge 12 ≥ 12 after 2 hours contact); Air Drying on Sand Beds (minimum 3 months). Restricted Agricultural Land Application: Strictly prohibited for direct public distribution or bagging. Subject to mandatory federal site restrictions governing food crop harvesting, animal grazing, and human access.
Mandatory Class B Site Restrictions (40 CFR §503.32(b))
When Class B biosolids are land-applied, natural environmental factors (sunlight ultraviolet radiation, soil desiccation, temperature) are required to complete pathogen destruction over time:
Food Crops with Harvested Parts Touching Ground (melons, strawberries, squash): Must not be harvested for 14 months following biosolids application.
Food Crops with Harvested Parts Below Soil Surface (root crops: potatoes, carrots, onions):
Must not be harvested for 20 months if biosolids remain on the soil surface for ≥ 4 \ge 4 ≥ 4 months prior to incorporation.
Must not be harvested for 38 months if biosolids are tilled or incorporated into the soil within 4 months of application.
Animal Grazing: Animals whose products enter the human food chain (beef and dairy cattle) must not graze on the land for at least 30 days following application.
Turf (Sod) Harvesting: Turf grown on land receiving Class B biosolids must not be harvested for 1 full year (365 days) post-application.
Public Access:
Low Potential for Public Exposure (private agricultural cropland, remote timber acreage): Access restricted for 30 days .
High Potential for Public Exposure (public parks, athletic sports complexes, golf courses): Access restricted for 1 full year (365 days) .
Vector Attraction Reduction (VAR) Standards
Disease vectors (flies, mosquitoes, rats, birds) can transfer pathogenic bacteria from biosolids to human environments. Operators must demonstrate compliance with at least one of the 12 Vector Attraction Reduction options under 40 CFR §503.33:
Option 1 (Biological Digestion): Achieve at least a 38% volatile solids reduction (VSR) during biological treatment.
Option 2 (Anaerobic Batch Bench Test): For anaerobically digested sludge that cannot demonstrate 38% VSR due to low initial volatile content, digest a bench sample for an additional 40 days at 30°C to 37°C; VAR is satisfied if additional VSR is < 17% .
Option 3 (Aerobic Batch Bench Test): For aerobically digested sludge, aerate a bench sample for an additional 30 days at 20°C; VAR is satisfied if additional VSR is < 15% .
Option 4 (Specific Oxygen Uptake Rate - SOUR): For aerobically digested sludge, the SOUR at 20°C must be ≤ 1.5 mg O 2 / hour per gram of total dry solids \le 1.5\text{ mg } O_2/\text{hour per gram of total dry solids} ≤ 1.5 mg O 2 / hour per gram of total dry solids .
Option 5 (Thermophilic Aerobic Treatment): Aerobically treat biosolids at > 40 ∘ C >40^\circ\text{C} > 4 0 ∘ C (average > 45 ∘ C >45^\circ\text{C} > 4 5 ∘ C ) for at least 14 consecutive days .
Option 6 (Alkaline Stabilization): Add alkali to raise pH to ≥ 12.0 \ge 12.0 ≥ 12.0 for 2 hours , and maintain pH ≥ 11.5 \ge 11.5 ≥ 11.5 for an additional 22 hours without adding more base.
Option 7 (Moisture Reduction without Primary Solids): Reduce moisture so total solids concentration is ≥ 75 % \ge 75\% ≥ 75% (for sludge without unstabilized primary solids).
Option 8 (Moisture Reduction with Primary Solids): Reduce moisture so total solids concentration is ≥ 90 % \ge 90\% ≥ 90% (for sludge containing unstabilized primary solids).
Option 9 (Subsurface Injection): Inject liquid biosolids beneath the ground surface within 8 hours of discharge.
Option 10 (Direct Soil Incorporation): Plow or disk surface-applied biosolids into the soil within 6 hours of application.
Heavy Metal Limits & Regulatory Tables
Part 503 establishes numeric concentration ceilings for nine trace heavy metal pollutants: Regulated Metals: Arsenic (As), Cadmium (Cd), Copper (Cu), Lead (Pb), Mercury (Hg), Molybdenum (Mo), Nickel (Ni), Selenium (Se), Zinc (Zn) \text{Regulated Metals: } \text{Arsenic (As), Cadmium (Cd), Copper (Cu), Lead (Pb), Mercury (Hg), Molybdenum (Mo), Nickel (Ni), Selenium (Se), Zinc (Zn)} Regulated Metals: Arsenic (As), Cadmium (Cd), Copper (Cu), Lead (Pb), Mercury (Hg), Molybdenum (Mo), Nickel (Ni), Selenium (Se), Zinc (Zn)
Table 1: Ceiling Concentration Limits: Absolute maximum ceiling. If a biosolid exceeds the Table 1 concentration for any single metal , it cannot be applied to land under any circumstances .
Table 2: Cumulative Pollutant Loading Rates (CPLR): Maximum cumulative mass of each pollutant (kg/ha or lb/acre) that can ever be applied to an agricultural site over its lifetime. Once a field reaches the CPLR for any single metal, no further biosolids can ever be applied to that acreage.
Table 3: Pollutant Concentrations (Monthly Average): High-quality metal standards. Biosolids that meet Table 3 metal limits, achieve Class A pathogen reduction, and satisfy VAR Options 1–8 earn the regulatory designation Exceptional Quality (EQ) . EQ biosolids are fully deregulated from site tracking and CPLR calculations.
Disposal & Beneficial Utilization Routes
Agricultural Land Application: Biosolids must be applied at the Agronomic Nitrogen Rate —the calculated loading rate designed to supply the precise nitrogen demand of the food or forage crop while preventing excess nitrate from leaching into underlying drinking water aquifers.
Municipal Solid Waste (MSW) Landfill Disposal (40 CFR Part 258): Biosolids routed to a sanitary landfill must pass the EPA Method 9095 Paint Filter Liquids Test (a 100 mL sample placed on a 60-mesh paint filter funnel must produce zero free liquid drainage over a 5-minute test period) and pass the Toxicity Characteristic Leaching Procedure (TCLP) proving the material is non-hazardous.