Study guide

2.3 Flocculation Basin Design, Clarification & Sedimentation

Alabama Water/Wastewater Operator Certification Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Alabama Regulations, Certification, Exams & Utility Administration

1.1 ADEM Division 335-10-1: Facility Classifications, Grades & Staffing Rules 1.2 Becoming Certified in Alabama: Exam Application, Operator Intern Status, Experience, Renewal & CEHs 1.3 Environmental Compliance, SDWA, Clean Water Act & NPDES Permits 1.4 Alabama's PSI-Delivered WPI Exams: Format, Grade Crosswalk & Need-to-Know Blueprints 1.5 ADEM Drinking-Water Operating Rules (Division 335-7): Control Tests, Residuals, Pressure, Cross-Connections & Records 1.6 Utility Administration: SOPs, Records, Security, Cybersecurity, Emergency Planning & Supervision

2 Chapter 2: Source Water, Wells, Coagulation, Filtration & Membranes

2.1 Source Water Hydrology, Groundwater vs. Surface Water & Protection 2.2 Coagulation Chemistry, Coagulants & Rapid Mixing Mechanics 2.3 Flocculation Basin Design, Clarification & Sedimentation 2.4 Granular Media Filtration, Head Loss & Backwash Protocols 2.5 Membrane Filtration: MF, UF, NF & RO Operation, Integrity Testing and Cleaning 2.6 Wells & Groundwater Systems: Construction, Pumps, Testing and Sanitary Protection (ADEM 335-7-5)

3 Chapter 3: Water Disinfection, Chemical Addition, Stabilization & Residuals

3.1 Chlorination Chemistry, Breakpoint Chlorination & Residuals 3.2 Disinfection Byproducts (DBPs), Stage 1/2 Rules & CT Compliance 3.3 Corrosion Control, Lead and Copper Rule & Fluoridation 3.4 Iron/Manganese Removal, Water Softening & Taste/Odor Control 3.5 Water Treatment Residuals: Sludge, Backwash Recycle & Plant Discharges

4 Chapter 4: Wastewater Preliminary & Primary Treatment

4.1 Wastewater Characteristics, Screening, Shredding & Grit Removal 4.2 Primary Sedimentation Basins, Scum Removal & Clarifier Performance

5 Chapter 5: Secondary Biological Treatment: Activated Sludge

5.1 Activated Sludge Microbiology, Basin Configurations & Aeration Systems 5.2 Process Control: F/M Ratio, MCRT/SRT & Sludge Settling Characteristics 5.3 Operational Troubleshooting (Bulking, Foaming, Pin Floc) & Process Modifications

6 Chapter 6: Fixed-Film Treatment, Lagoons, Nutrient Removal, Tertiary Filtration & Disinfection

6.1 Trickling Filters & Rotating Biological Contactors (RBCs) 6.2 Waste Stabilization Ponds, Aerated Lagoons & Alabama Grade I Lagoon Operations 6.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal 6.4 Tertiary Filtration & Membrane Bioreactors (MBRs) 6.5 Wastewater Disinfection & Dechlorination: Chlorine, UV and Ozone

7 Chapter 7: Sludge Treatment, Biosolids & Odor Control

7.1 Sludge Thickening, Aerobic Digestion & Anaerobic Digestion 7.2 Mechanical Dewatering, Polymer Conditioning & EPA 503 Biosolids Regulations 7.3 Odor Control & Wastewater Chemical Addition

8 Chapter 8: Water Distribution Systems, Installation, Metering & Water Loss

8.1 Distribution Piping Materials, Valves & Finished Water Storage Facilities 8.2 Water Main Flushing, Disinfection Protocols (AWWA C651) & Water Quality Maintenance 8.3 Distribution Hydraulics, Pressure Control & Cross-Connection Prevention 8.4 Main & Service Installation, Tapping, Repair and Utility Locating (Alabama 811) 8.5 Meters, Water Loss Control, Asset Management & Customer Service

9 Chapter 9: Wastewater Collection Systems, Lift Stations & Sewer Maintenance

9.1 Gravity Collection Networks, Manhole Construction & Self-Cleansing Velocity Standards 9.2 Wastewater Lift Stations, Submersible Pumps, Force Mains & Inflow/Infiltration (I&I) 9.3 Sewer Cleaning, CCTV Inspection & SSO Response

10 Chapter 10: Laboratory Procedures, Sampling & Environmental Compliance

10.1 Drinking Water Laboratory Analysis: Turbidity, pH, Alkalinity & Coliform Testing 10.2 Wastewater Laboratory Testing: BOD5, COD, Total Suspended Solids & Settleability 10.3 Representative Sampling Protocols, Preservation, Chain of Custody & QA/QC

11 Chapter 11: Plant Equipment, Pumps, Motors & Instrumentation

11.1 Centrifugal and Positive Displacement Pumps: Operation, Cavitation & Packing/Seals 11.2 Electric Motors, Variable Frequency Drives, Flow Meters & SCADA Systems

12 Chapter 12: Safety: Chemicals, Confined Spaces & Field Hazards

12.1 Chemical Safety: Chlorine Gas Emergency Handling (Kits A & B) & Hydrogen Sulfide (H2S) Hazards 12.2 Permit-Required Confined Space Entry, Lockout/Tagout (LOTO) & Personal Protective Equipment 12.3 Field Safety: Work-Zone Traffic Control, Electrical Hazards, Fall Protection & Hazard Communication

13 Chapter 13: Water & Wastewater Mathematics: Hydraulics, Chemical Feed & Pumping

13.1 Flow Conversions, Geometry, Tank Volume & Detention Time Calculations 13.2 The Pounds Formula, Chemical Feed Rates & Solution Concentration Calculations 13.3 Pumping Math: Total Dynamic Head, Horsepower, Efficiency & Power Cost

14 Chapter 14: Water & Wastewater Mathematics: Treatment Process Calculations

14.1 Clarifier Surface Overflow Rate, Weir Loading & Granular Filter Loading Rates 14.2 Biological Calculations: F/M Ratio, MCRT Solids Balance & Sludge Volume Index (SVI)

2.3 Flocculation Basin Design, Clarification & Sedimentation

Key Takeaways Explain This Topic AI

Flocculation aggregates micro-flocs into large, dense macro-flocs using tapered velocity gradients (G decreasing from ~50-70 s^-1 to ~15-20 s^-1) over 20 to 45 minutes to prevent floc shearing.

Sedimentation basins operate across four functional zones: inlet (energy dissipation and flow distribution), settling (quiescent sedimentation), sludge (solids consolidation and removal), and outlet (effluent weirs and launders).

High-rate tube settlers and lamella plates inclined at 60 degrees shorten settling distance from 10-15 feet to 2 inches, expanding clarifier capacity by 2 to 4 times.

Clarifier hydraulic parameters include Detention Time (DT = V / Q), Surface Overflow Rate (SOR = Q / Asurface), and Weir Overflow Rate (WOR = Q / Lweir).

Septic sludge retention in the clarifier hopper triggers anaerobic gasification (methane and carbon dioxide), floating black/brown sludge chunks over the effluent weirs.

Last updated: October 2026

2.3 Flocculation Basin Design, Clarification & Sedimentation

Quick Answer: After colloids are destabilized in rapid mixing, water flows into the flocculation basin , where gentle, controlled agitation promotes particle collisions to build large, dense macro-flocs. To prevent shear forces from breaking the fragile flocs, the velocity gradient is systematically tapered downward across successive compartments ( 50 s − 1 → 30 s − 1 → 20 s − 1 50\text{ s}^{-1} \to 30\text{ s}^{-1} \to 20\text{ s}^{-1} 50 s − 1 → 30 s − 1 → 20 s − 1 ) over a 20- to 45-minute detention time. Clarified water then enters the sedimentation basin , where gravity removes 80 % to 95 % 80\%\text{ to }95\% 80% to 95% of solids prior to filtration, governed by the Surface Overflow Rate ( SOR = Q / A \text{SOR} = Q / A SOR = Q / A ) and Weir Overflow Rate ( WOR = Q / L \text{WOR} = Q / L WOR = Q / L ).

Flocculation Process Engineering

Flocculation is the physical process of slowly mixing destabilized water to induce contact between micro-floc particles, agglomerating them into larger, visible, settleable macro-flocs (often called "pin floc" transitioning to "snowball floc").

Collision Kinetics: Perikinetic vs. Orthokinetic

Perikinetic Flocculation: Particle collisions driven by random thermal Brownian motion. Dominates in the initial seconds for sub-micron particles ( < 1 μ m < 1\text{ }\mu\text{m} < 1 μ m ).

Orthokinetic Flocculation: Collisions induced by bulk fluid shear, velocity gradients, and physical agitation. Dominates particle collisions once particles exceed 1 to 2 μ m 1\text{ to }2\text{ }\mu\text{m} 1 to 2 μ m .

Velocity Gradient Tapering ( G G G Value)

Flocculation requires balancing two competing hydrodynamic forces:

Agitation: Sufficient fluid motion to bring particles into contact.

Hydrodynamic Shear Stress: Excessive fluid turbulence that tears fragile chemical bridges and fractures floc particles.

To optimize this balance, modern flocculation basins are partitioned into three or more successive stages separated by baffle walls, with the velocity gradient ( G G G ) systematically tapered downward:

Stage Velocity Gradient ( G G G ) Detention Time ( t t t ) Process Objective

Stage 1 50 to 70 s − 1 50\text{ to }70\text{ s}^{-1} 50 to 70 s − 1 7 to 15 minutes 7\text{ to }15\text{ minutes} 7 to 15 minutes Rapid collision of destabilized micro-particles into pin floc

Stage 2 30 to 40 s − 1 30\text{ to }40\text{ s}^{-1} 30 to 40 s − 1 7 to 15 minutes 7\text{ to }15\text{ minutes} 7 to 15 minutes Building pin floc into medium-density flocs

Stage 3 15 to 25 s − 1 15\text{ to }25\text{ s}^{-1} 15 to 25 s − 1 7 to 15 minutes 7\text{ to }15\text{ minutes} 7 to 15 minutes Gentle agglomeration into heavy macro-floc without shearing

The Camp Number ( G t Gt Gt )

The product of the velocity gradient and detention time is the dimensionless Camp Number ( G t Gt Gt ) :

G t = G × t Gt = G \times t Gt = G × t

Target G t Gt Gt Range: 10 , 000 to 100 , 000 10,000\text{ to }100,000 10 , 000 to 100 , 000 (typically 20 , 000 to 60 , 000 20,000\text{ to }60,000 20 , 000 to 60 , 000 ).

If G t < 10 , 000 Gt < 10,000 Gt < 10 , 000 : Insufficient collisions occur, yielding small, poorly settling "pin floc" that carries over to filters.

If G t > 100 , 000 Gt > 100,000 Gt > 100 , 000 or if G > 75 s − 1 G > 75\text{ s}^{-1} G > 75 s − 1 in later stages: Fluid shear ruptures floc polymers, shearing flocs into fine particles that blind filter media.

Flocculation Equipment

Paddle-Wheel Flocculators: Large, slowly rotating wooden or fiberglass paddle blades mounted on horizontal or vertical shafts. Horizontal-shaft units feature variable-speed drives (VSDs) to adjust reel speed ( 0.5 to 3.0 rpm 0.5\text{ to }3.0\text{ rpm} 0.5 to 3.0 rpm ) as water temperature and turbidity fluctuate.

Vertical Turbine Hydrofoils: Modern axial-flow hydrofoil impellers installed in square compartments. Provide uniform mixing with lower energy consumption and eliminate submerged drive packings.

Baffled Hydraulic Channels: Water flows through a labyrinth of channels. Around-the-end (horizontal flow) and over-and-under (vertical flow) baffles generate velocity gradients through frictional head loss. They require no motors but lack flexibility: when plant flow drops, G G G drops proportionally.

Sedimentation Basin Theory & Functional Zones

Sedimentation (clarification) is the physical separation of suspended particles from water by gravitational settling. Under ideal conditions, a particle settles when its downward settling velocity ( v s v_s v s ​ ) carries it into the sludge zone before the water exits the basin.

Stokes' Law for Settling Velocity

For discrete, spherical particles in laminar flow, terminal settling velocity is defined by Stokes' Law :

v s = g ( ρ p − ρ w ) d 2 18 μ v_s = \frac{g (\rho_p - \rho_w) d^2}{18 \mu} v s ​ = 18 μ g ( ρ p ​ − ρ w ​ ) d 2 ​

where g g g is acceleration due to gravity, ρ p \rho_p ρ p ​ is particle density, ρ w \rho_w ρ w ​ is water density, d d d is particle diameter, and μ \mu μ is dynamic viscosity of water.

Practical Operational Takeaways from Stokes' Law:

Particle Diameter ( d 2 d^2 d 2 ): Settling velocity increases with the square of the particle diameter . Doubling floc diameter via proper coagulation/flocculation quadruples settling velocity.

Density Difference ( ( ρ p − ρ w ) (\rho_p - \rho_w) ( ρ p ​ − ρ w ​ ) ): Mineral clays and silt ( ρ ≈ 2.65 g/cm 3 \rho \approx 2.65\text{ g/cm}^3 ρ ≈ 2.65 g/cm 3 ) settle rapidly, whereas organic flocs ( ρ ≈ 1.01 to 1.05 g/cm 3 \rho \approx 1.01\text{ to }1.05\text{ g/cm}^3 ρ ≈ 1.01 to 1.05 g/cm 3 ) have densities near that of water and settle slowly.

Water Viscosity ( μ \mu μ ): Viscosity increases substantially as water cools. Alum floc settles roughly 30 % to 40 % 30\%\text{ to }40\% 30% to 40% slower at 4 ∘ C 4^\circ\text{C} 4 ∘ C than at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C , requiring lower loading rates or coagulant aid polymers during winter.

The Four Functional Zones of a Clarifier +---------------------------------------------------------------------------------+

  • | CONVENTIONAL RECTANGULAR BASIN |
  • | |
  • | INLET ZONE SETTLING ZONE OUTLET ZONE |
  • | +---------+ ---------------------------------------------> +-------------+ |
  • | | Perfor- | Water Flow Streamline | Effluent | |
  • | | ated | . . . . . . . . . . . . . . . . . . . . . . . | Launder & | |
  • | | Baffle | \ | V-Notch | |
  • | | Wall | \ | Weirs | |
  • | +---------+ \ Particle Settling Trajectory +-------------+ |
  • | \ |
  • | =======================\==================================================== |
  • | SLUDGE ZONE: Floor Sludge Blanket & Collector Scraper Flights |
  • | [ Sludge Hopper & Blow-Off Valve ] |
  • +---------------------------------------------------------------------------------+

Inlet Zone: Transitions turbulent flow from the flocculator into uniform, non-turbulent, horizontal plug flow. Uses perforated diffuser walls or submerged target baffles to evenly distribute flow across the basin cross-section.

Settling Zone: The central, quiescent volume of the tank where settling occurs without hydraulic disturbance.

Outlet Zone: Collects clarified supernatant and channels it to filter influent conduits. Uses effluent launders equipped with adjustable V-notch weirs or submerged orifices to ensure uniform draw-off without generating localized upwelling currents.

Sludge Zone: The bottom section where settled solids consolidate. Features bottom scrapers (flight-and-chain or traveling bridge rakes) that push sludge toward hoppers for continuous or intermittent blow-off.

  • High-Rate Clarification Technologies
  • Shallow-Depth Settling Theory (Hazen's Principle)

In 1904, Allen Hazen demonstrated that the clarification capacity of a sedimentation basin depends strictly on its surface area , completely independent of tank depth. A particle settling at 1.0 ft/min 1.0\text{ ft/min} 1.0 ft/min in a 12 -foot-deep 12\text{-foot-deep} 12 -foot-deep basin takes 12 minutes 12\text{ minutes} 12 minutes to reach the bottom. If horizontal false floors are inserted every 2 inches 2\text{ inches} 2 inches , that same particle settles out in 10 seconds .

Tube Settlers & Lamella Plate Settlers

High-rate settlers exploit shallow-depth settling by placing inclined tubes or parallel plates within the settling zone:

Configuration: Polyvinyl chloride (PVC) hexagonal tubes or stainless steel lamella plates inclined at an angle of 60 ∘ 60^\circ 6 0 ∘ .

Self-Cleaning Slope: An angle of 60 ∘ 60^\circ 6 0 ∘ exceeds the angle of repose of coagulated chemical sludge. Accumulated solids slide down the bottom surface of the tubes by gravity, dropping into the sludge hopper below while clarified water flows upward.

Performance Benefit: Reduces vertical settling distance from 12 feet 12\text{ feet} 12 feet down to 2 inches 2\text{ inches} 2 inches , increasing the hydraulic capacity of existing basins by 150 % to 300 % 150\%\text{ to }300\% 150% to 300% without increasing plant footprint.

Solids-Contact (Sludge Blanket) Clarifiers

Solids-contact units combine rapid mixing, flocculation, and sedimentation inside a single compact basin. Raw water and chemicals are introduced into a central draft tube where rotating impellers mix them with pre-formed, recirculated sludge .

The water then flows outward and upward through a suspended, fluidized sludge blanket . The blanket acts as a dynamic mechanical and chemical filter: upward-flowing micro-flocs collide with and stick to the vast surface area of pre-existing flocs.

Operational Metric: Operators perform a 5-minute sludge settleability test using a 100 mL 100\text{ mL} 100 mL graduated cylinder. The target sludge volume is typically maintained at 10 % to 20 % 10\%\text{ to }20\% 10% to 20% . If the blanket level rises too high, sludge blows over onto filters; if drawn down too low, clarification efficiency collapses.

Dissolved Air Flotation (DAF)

An alternative clarification process for raw waters carrying low-density particles that resist settling (algal blooms, low-turbidity high-color waters):

A side-stream of clarified water is pressurized to roughly 60 to 85 psi 60\text{ to }85\text{ psi} 60 to 85 psi (about 400 to 600 kPa) and saturated with air in a pressure vessel.

When injected into the flotation basin at atmospheric pressure, dissolved air precipitates as microscopic bubbles ( 20 to 80 μ m 20\text{ to }80\text{ }\mu\text{m} 20 to 80 μ m ).

Bubbles attach to floc particles, reducing their apparent density below that of water and floating them to the surface as a float layer (skum) carrying 2 % to 4 % 2\%\text{ to }4\% 2% to 4% dry solids, which is mechanically scraped off.

Clarifier Hydraulic Calculations & Worked Examples

Plant operators must master three foundational hydraulic parameters governing clarifiers:

1. Detention Time ( D T DT D T )

The theoretical time water resides inside the tank:

D T (hours) = Basin Volume (gallons) Flow Rate (gpm) × 60 min/hr = Basin Volume (gallons) × 24 hr/day Flow Rate (gpd) DT\text{ (hours)} = \frac{\text{Basin Volume (gallons)}}{\text{Flow Rate (gpm)} \times 60\text{ min/hr}} = \frac{\text{Basin Volume (gallons)} \times 24\text{ hr/day}}{\text{Flow Rate (gpd)}} D T (hours) = Flow Rate (gpm) × 60 min/hr Basin Volume (gallons) ​ = Flow Rate (gpd) Basin Volume (gallons) × 24 hr/day ​

Standard Range: 2.0 to 4.0 hours 2.0\text{ to }4.0\text{ hours} 2.0 to 4.0 hours for conventional rectangular basins.

2. Surface Overflow Rate ( S O R SOR SOR / Surface Loading Rate)

The flow rate applied per square foot of basin surface area, representing the upward fluid velocity:

S O R (gpd/ft 2 ) = Flow Rate (gpd) Surface Area (ft 2 ) = Q L × W SOR\text{ (gpd/ft}^2) = \frac{\text{Flow Rate (gpd)}}{\text{Surface Area (ft}^2)} = \frac{Q}{L \times W} SOR (gpd/ft 2 ) = Surface Area (ft 2 ) Flow Rate (gpd) ​ = L × W Q ​

Design Standards:

Conventional Rectangular Basins: 500 to 800 gpd/ft 2 500\text{ to }800\text{ gpd/ft}^2 500 to 800 gpd/ft 2 (up to 1 , 000 gpd/ft 2 1,000\text{ gpd/ft}^2 1 , 000 gpd/ft 2 for iron flocs).

Basins with Tube Settlers: 1 , 200 to 2 , 500 gpd/ft 2 1,200\text{ to }2,500\text{ gpd/ft}^2 1 , 200 to 2 , 500 gpd/ft 2 .

3. Weir Overflow Rate ( W O R WOR W OR / Weir Loading Rate)

The volume of water discharging per linear foot of active effluent weir:

W O R (gpd/ft) = Flow Rate (gpd) Total Active Weir Length (ft) WOR\text{ (gpd/ft)} = \frac{\text{Flow Rate (gpd)}}{\text{Total Active Weir Length (ft)}} W OR (gpd/ft) = Total Active Weir Length (ft) Flow Rate (gpd) ​

Standard Limit: Typically < 10 , 000 to 20 , 000 gpd/ft < 10,000\text{ to }20,000\text{ gpd/ft} < 10 , 000 to 20 , 000 gpd/ft . Exceeding design WOR creates high-velocity exit currents near launders that pull settled floc up off the floor and over the weirs.

Worked Engineering Problem: Clarifier Performance Check

Problem: A water treatment plant operates two identical parallel rectangular sedimentation basins. Each basin is 140 feet 140\text{ feet} 140 feet long, 35 feet 35\text{ feet} 35 feet wide, and has a water depth of 14 feet 14\text{ feet} 14 feet . Each basin has 120 linear feet 120\text{ linear feet} 120 linear feet of effluent weir trough. The total plant flow is 8.4 MGD 8.4\text{ MGD} 8.4 MGD . Calculate for a single basin:

The flow treated per basin ( Q Q Q ).

The detention time ( D T DT D T ) in hours.

The surface overflow rate ( S O R SOR SOR ) in gpd/ft 2 \text{gpd/ft}^2 gpd/ft 2 .

The weir overflow rate ( W O R WOR W OR ) in gpd/ft \text{gpd/ft} gpd/ft .

Step 1: Determine Flow per Basin: Q = 8 , 400 , 000 gpd 2 = 4 , 200 , 000 gpd Q = \frac{8,400,000\text{ gpd}}{2} = 4,200,000\text{ gpd} Q = 2 8 , 400 , 000 gpd ​ = 4 , 200 , 000 gpd

Step 2: Calculate Basin Volume in Gallons: Volume (cu ft) = 140 ft × 35 ft × 14 ft = 68 , 600 ft 3 \text{Volume (cu ft)} = 140\text{ ft} \times 35\text{ ft} \times 14\text{ ft} = 68,600\text{ ft}^3 Volume (cu ft) = 140 ft × 35 ft × 14 ft = 68 , 600 ft 3 Volume (gal) = 68 , 600 ft 3 × 7.48 gal/ft 3 = 513 , 128 gallons \text{Volume (gal)} = 68,600\text{ ft}^3 \times 7.48\text{ gal/ft}^3 = 513,128\text{ gallons} Volume (gal) = 68 , 600 ft 3 × 7.48 gal/ft 3 = 513 , 128 gallons

Step 3: Calculate Detention Time ( D T DT D T ): D T = Volume (gal) × 24 hr/day Q (gpd) = 513 , 128 × 24 4 , 200 , 000 = 12 , 315 , 072 4 , 200 , 000 = 2.93 hours DT = \frac{\text{Volume (gal)} \times 24\text{ hr/day}}{Q\text{ (gpd)}} = \frac{513,128 \times 24}{4,200,000} = \frac{12,315,072}{4,200,000} = 2.93\text{ hours} D T = Q (gpd) Volume (gal) × 24 hr/day ​ = 4 , 200 , 000 513 , 128 × 24 ​ = 4 , 200 , 000 12 , 315 , 072 ​ = 2.93 hours

Step 4: Calculate Surface Overflow Rate ( S O R SOR SOR ): Surface Area = 140 ft × 35 ft = 4 , 900 ft 2 \text{Surface Area} = 140\text{ ft} \times 35\text{ ft} = 4,900\text{ ft}^2 Surface Area = 140 ft × 35 ft = 4 , 900 ft 2 S O R = 4 , 200 , 000 gpd 4 , 900 ft 2 = 857.14 gpd/ft 2 SOR = \frac{4,200,000\text{ gpd}}{4,900\text{ ft}^2} = 857.14\text{ gpd/ft}^2 SOR = 4 , 900 ft 2 4 , 200 , 000 gpd ​ = 857.14 gpd/ft 2

Step 5: Calculate Weir Overflow Rate ( W O R WOR W OR ): W O R = 4 , 200 , 000 gpd 120 ft = 35 , 000 gpd/ft WOR = \frac{4,200,000\text{ gpd}}{120\text{ ft}} = 35,000\text{ gpd/ft} W OR = 120 ft 4 , 200 , 000 gpd ​ = 35 , 000 gpd/ft

Evaluation: The calculated W O R WOR W OR ( 35 , 000 gpd/ft 35,000\text{ gpd/ft} 35 , 000 gpd/ft ) significantly exceeds the standard limit of 20 , 000 gpd/ft 20,000\text{ gpd/ft} 20 , 000 gpd/ft , indicating that the effluent weir length is deficient, creating localized approach velocities that carry over floc.

Clarifier Troubleshooting & Performance Control

Operational Fault Probable Cause Diagnostic Verification Operator Remediation

Chunks of dark, foul sludge rising and floating over weirs Septic sludge; sludge held in hoppers too long undergoes anaerobic digestion Core sample sludge blanket depth; test for H 2 S \text{H}_2\text{S} H 2 ​ S or gas bubbles Increase sludge pump frequency and duration; inspect mechanical scraper mechanism

Floc rolling over weir along one wall while opposite side is calm Thermal density current, wind currents, or unlevel weir plates Measure water temperature gradient; check weir elevations with transit level Install windbreak covers; adjust V-notch weir plates to ensure uniform crest elevation

Tiny "pin floc" carrying over throughout entire settling zone Floc shearing from excessive G G G in Stage 3, or underdosed coagulant aid Inspect Stage 3 floc size; run jar test checking coagulant aid polymer Reduce Stage 3 paddle speed; add or adjust dosage of anionic polymer aid

Sludge blanket rising in solids-contact clarifier during rain event Cold raw water shock density current or sudden hydraulic surge Measure raw water temperature; run 5-minute settleability test Increase sludge wasting rate; adjust recirculator impeller speed

Loading diagram... Sedimentation Basin Functional Zones and Particle Settling Trajectory