Study guide
6.1 Requisitions, Patient Prep & Site Selection
AMCA CMAC Clinical Medical Assistant Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Pathways & Registration 1.3 How to Use This Guide & Study Strategy by Weight
2 Professionalism
2.1 Appearance, Integrity & Accountability 2.2 Diversity, Empathy & Conflict Management 2.3 Communication & Team Support
3 Medical Law & Ethics
3.1 Scope of Practice for Clinical Medical Assistants 3.2 Ethical & Legal Issues 3.3 Workplace Legislation: CLIA, OSHA, HIPAA, HITECH, GINA & Patient Bill of Rights 3.4 Consent & Advance Directives
4 Infection Control
4.1 Hand Hygiene, PPE & Respiratory Etiquette 4.2 Cleaning, Disinfection, Sterilization & Exam Room Prep 4.3 Transmission-Based Precautions & Nosocomial Infection 4.4 Sharps Safety & Biohazard Handling
5 Electrocardiography Testing
5.1 ECG Machine Prep & Lead Placement 5.2 Obtaining ECGs & Special Populations 5.3 Artifacts, Troubleshooting & Holter Monitors
6 Phlebotomy Foundations
6.1 Requisitions, Patient Prep & Site Selection 6.2 Tube Additives & Order of Draw 6.3 Venipuncture Technique, Special Needs & Aftercare 6.4 Capillary Puncture
7 Specimens, Cultures & CLIA-Waived POC
7.1 Urine Collection (Adult & Pediatric) 7.2 Cultures, Smears, Labeling & Documentation 7.3 Quality Control & CLIA-Waived POC Testing 7.4 Chain-of-Custody Testing
8 Diagnostic Tests & Lab Results
8.1 Vision & Respiratory Testing; Assisting Providers 8.2 Normal/Abnormal Lab Values & Reporting 8.3 Specimen Preservation Methods
9 Patient Intake
9.1 Patient Identification & Medical History 9.2 Body Measurements & Pediatric Growth Charts 9.3 Vital Signs Measurement & Abnormal Values
10 Assisting with Physical Examinations & Procedures
10.1 Room Prep, Positioning & Assisting the Provider 10.2 Surgical Asepsis & Minor Procedure Prep 10.3 Wound Care, Irrigation, Post-Care & Ambulation
11 Administration of Medications
11.1 Drug Classes, Legal Requirements & Storage 11.2 Seven Rights & Dosage Calculations 11.3 Oral & Parenteral Routes, Sites & Equipment 11.4 Vaccinations, Prescriptions & Patient Teaching
12 Office Reception
12.1 Greeting, Emergency Triage & Demographics 12.2 Phones, Scheduling Techniques & Reminders 12.3 Lab Results Routing & Referrals
13 Medical Record Management
13.1 EHR Systems, POMR/SOMR & Immunization Records 13.2 Filing, HIPAA Storage & Record Release 13.3 EHR Lockout & Documenting Medical Errors
14 Patient Care Coordination & Education
14.1 Healthcare Team Roles & Care Coordination 14.2 Patient Education: Self-Exam, Nutrition & Materials
15 Billing & Insurance
15.1 Patient Billing, Payments, Deposits & Collections 15.2 Insurance Verification & Prior Authorization 15.3 Claims, Coding, Appeals & CMS/Private Plans
16 Medical Office Management
16.1 Opening/Closing, Inventory & Correspondence 16.2 Office Safety, Emergencies & SDS
17 Exam Strategy & Final Review
17.1 Test-Day Strategy, Domain Weights & Retake Path
6.1 Requisitions, Patient Prep & Site Selection
Key Takeaways Explain This Topic AI
Always verify the requisition against two patient identifiers and stop if any name, DOB, test, or special-instruction mismatch appears.
Confirm patient requirements before drawing: fasting (typically 8–12 hours), timed draws, resting posture, medication timing, and consent/refusal.
Match equipment to the patient and tests—gauge, device (ETS, butterfly, syringe), and tube types—before applying the tourniquet.
Tourniquets stay on ≤1 minute; vigorous fist pumping raises potassium; brief warming can help poor peripheral flow.
Preferred antecubital site is median cubital, then cephalic, then basilic last; avoid mastectomy/fistula arms, hematomas, edematous sites, and above-IV draws.
Last updated: August 2026
Why Pre-Draw Steps Dominate Specimen Errors
On the AMCA CMAC blueprint, Collecting Specimens and Diagnostic Testing is 25% of scored items (~40 of 160). Tasks 3.03.1–3.03.6 sit at the front of that block: verify requisitions, confirm patient requirements, select equipment, instruct the patient, prepare the patient (tourniquet, hand squeeze, heat), and prepare the site aseptically. Most laboratory “bad results” are pre-analytical —wrong patient, wrong prep, wrong site, or contaminated site—not analyzer failure. Master this section as a fixed checklist, not as optional courtesy steps.
3.03.1 Verify the Details of Requisitions
A requisition (paper or electronic order) is the legal/clinical authorization to collect specific specimens. Before you touch the patient, reconcile the order with the chart and the person in front of you.
- Requisition element What you verify
- Patient identity Full legal name and date of birth match the patient’s stated ID and armband (if used)
- Ordering provider Name/credentials present; order is current
- Tests ordered Exact panels/tests; no ambiguous abbreviations you cannot resolve
- Priority Routine, STAT, timed, fasting, or “draw with next AM labs”
- Special instructions Ice, protect from light, chain of custody, peak/trough times
- Diagnosis/ICD context As required by facility for coding—not a substitute for clinical orders
- Date/time stamps Order date; any “collect after” or “do not draw before” notes
Stop rules: any identifier mismatch, missing test, expired order per policy, or patient who cannot be identified → do not draw . Room number or bed number is never an identifier. Do not ask leading yes/no questions (“Are you Mrs. Lopez?”). Ask the patient to state full name and date of birth , then match the requisition and armband.
Electronic orders can still be wrong (duplicate patients, wrong encounter). Visual verification remains your job even when the barcode “beeps.”
3.03.2 Establish Whether the Patient Meets Test Requirements
Many tests are valid only if preconditions are met. Task 3.03.2 expects you to screen before collecting , not after the lab rejects the sample.
Requirement Typical expectation What to do if not met
Fasting Usually 8–12 hours , water often allowed; no food, caloric drinks, gum, or smoking per protocol Reschedule or document non-fasting per provider order; do not silently collect “anyway”
Basal / morning Rested, often fasting, morning cortisol/iron timing Note time and status; follow timed-draw protocol
Medication hold Some drugs held before levels or special panels Confirm with provider/nurse—never independently stop meds
Peak / trough Trough just before next dose; peak at drug-specific interval after dose Coordinate with medication administration record
Rest / posture Sitting 5+ minutes can matter for some analytes Seat the patient; avoid drawing immediately after running in
Consent / ability Alert enough to consent or surrogate identified Do not force a refused draw; notify provider
Ask focused questions: “When did you last eat or drink anything other than water?” “Which medications did you take this morning?” “Have you had a mastectomy or dialysis fistula?” Document answers that affect interpretation or site choice.
3.03.3 Select Appropriate Equipment for Test and Patient Type
Equipment choice is part of the CMAC skill set. Wrong gauge or device increases hemolysis , failed sticks , and injury risk .
- Device / supply Typical use
- ETS (evacuated tube system) with straight needle Routine adult antecubital draws; standard 21-gauge
- 22-gauge Smaller or more fragile veins
- 23-gauge butterfly (winged) Hand veins, pediatrics, difficult access; may need discard tube before light blue
Syringe + transfer device Collapsing veins; controlled vacuum; never force blood into tubes without a transfer device
- Needle gauges (concept) Higher gauge number = smaller bore
- Tourniquet Latex-free if allergy; single-use preferred
Antiseptic 70% isopropyl alcohol routine; chlorhexidine (or facility culture prep) for blood cultures; non-alcohol prep when alcohol would invalidate the test (e.g., legal ethanol)
- Tubes Correct color/additive for ordered tests; check expiration and vacuum integrity
- PPE Gloves minimum; add face protection if splash risk
Match tube inventory to the requisition before you stick so you do not leave the needle in place while hunting for a lavender top. For pediatric or elderly patients, prefer smaller volumes and devices that reduce vacuum trauma when policy allows.
3.03.4 Provide Instructions for Specimen Collection and Procedures
Patients need clear, brief teaching—even for a simple blood draw.
Venipuncture teaching points:
Purpose in plain language (“blood tests your provider ordered for your cholesterol and blood count”).
What they will feel (brief needle stick, pressure).
How long it takes and that they may sit after.
Aftercare: keep bandage on, avoid heavy lifting with that arm for a few hours if instructed, report prolonged bleeding or swelling.
Rights: they may refuse; ask questions; report pain, numbness, or dizziness immediately.
Example of non-blood instruction (clean catch urine) —still within 3.03.4’s “e.g., clean catch” spirit for the broader specimen domain: cleanse as directed, begin voiding, catch midstream, avoid touching inside of cup. Full urine methods expand in Chapter 7; here, know that instruction quality is a blueprint task, not optional customer service.
Use teach-back: “Tell me when you last ate” or “Show me which arm we should avoid.” Language barriers require an interpreter per facility policy—not a minor child as sole translator for complex consent when alternatives exist.
3.03.5 Prepare Patients: Tourniquet, Hand Squeeze, and Heat
These three maneuvers improve vein visibility but alter analytes if misused.
Tourniquet
- Rule Detail
- Placement About 3–4 inches (7–10 cm) above the intended puncture
- Time limit ≤1 minute ; release and wait ~2 minutes before reapplying if needed
- Purpose Temporarily slows venous return so veins engorge
- Overuse risk Hemoconcentration (falsely ↑ proteins, potassium, calcium, enzymes, formed elements)
- Release timing Once blood flow is established (often as first tube fills), release per facility protocol
Never leave a tourniquet on while you walk away for supplies. If veins do not appear, release, rehydrate/warm/reposition strategy, then retry—do not “crank tighter for five minutes.”
Hand squeeze / fist pumping
A gentle fist once can help define veins. Vigorous, repeated fist pumping is a classic exam trap: it can falsely elevate potassium (and affect other muscle-related analytes). Instruct: “Make a fist and hold” rather than “pump hard.”
Heat
Warm packs or warm towels (about 42°C / ~107°F , typically 3–5 minutes , never burning hot) increase local blood flow for difficult veins or capillary collections. Do not use microwave-overheated packs that risk burns. Heat is an assist, not a license to ignore site restrictions.
Additional prep
Seat or recline patients with a history of syncope .
Support the arm on a firm surface, palm up, slight elbow extension.
Ask about latex allergy, bleeding disorders , anticoagulants , and preferred arm.
Confirm nothing to eat/drink when fasting applies.
- 3.03.6 Prepare the Site: Aseptic Technique and Vein Selection
- Preferred veins (antecubital fossa)
- Priority Vein Notes
- 1st Median cubital Well anchored, lower nerve/artery risk for most patients
- 2nd Cephalic Lateral (thumb side); useful when median is poor
- 3rd Basilic Medial; last resort—near median nerve and brachial artery
- Alternate Dorsal hand Butterfly, shallow angle; more painful, smaller veins
Palpate: veins feel bouncy/spongy and non-pulsatile. Arteries pulse . Tendons feel hard and cord-like without bounce.
Sites and situations to avoid
- Avoid or restrict Why
- Arm on side of mastectomy / lymph node dissection Lymphostasis, infection risk; needs provider guidance
- Arm with AV fistula / graft Never routine draw—limb-threatening
- Above an IV IV fluid contaminates specimen; draw below or other arm, follow policy for pausing IVs
- Hematoma Contaminated, painful; draw distal/other site
- Edema, burns, scars, tattoos over site, infection/rash Dilution, poor healing, contamination, dye issues
- Sclerosed / thrombosed veins No flow, painful
- Foot/ankle (adults) Higher clot risk; often requires provider approval
- Aseptic site prep (routine venipuncture)
Cleanse with 70% isopropyl alcohol in a concentric circle from center outward (or facility-approved method).
Allow to air dry fully (~30 seconds). Do not blow, fan, or wipe dry with non-sterile gauze.
Do not re-palpate the cleansed center with a contaminated finger; if you must re-palpate, re-cleanse.
For blood cultures , use facility culture prep (often chlorhexidine scrub with required dry time)—routine quick alcohol wipe is not enough.
Aseptic prep reduces culture contamination and local infection. It does not replace hand hygiene and glove use (infection-control domain), which still apply every draw.
Putting 3.03.1–3.03.6 Into One Flow
Review requisition → gather tubes/equipment.
Identify patient with two identifiers .
Confirm fasting/timed/special requirements and contraindications.
Explain procedure; obtain cooperation/consent.
Position, apply tourniquet ≤1 min, select vein, release if prolonged search.
Cleanse, dry, perform venipuncture (next sections cover needle technique).
If any step fails, stop and escalate —wrong-patient draws and contaminated cultures are high-harm, high-liability events. For CMAC scenario stems, the correct answer almost always prioritizes ID verification, requirement checks, and site safety over “just get the blood.”