Study guide

6.2 Tube Additives & Order of Draw

AMCA CMAC Clinical Medical Assistant Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Eligibility Pathways & Registration 1.3 How to Use This Guide & Study Strategy by Weight

2 Professionalism

2.1 Appearance, Integrity & Accountability 2.2 Diversity, Empathy & Conflict Management 2.3 Communication & Team Support

3 Medical Law & Ethics

3.1 Scope of Practice for Clinical Medical Assistants 3.2 Ethical & Legal Issues 3.3 Workplace Legislation: CLIA, OSHA, HIPAA, HITECH, GINA & Patient Bill of Rights 3.4 Consent & Advance Directives

4 Infection Control

4.1 Hand Hygiene, PPE & Respiratory Etiquette 4.2 Cleaning, Disinfection, Sterilization & Exam Room Prep 4.3 Transmission-Based Precautions & Nosocomial Infection 4.4 Sharps Safety & Biohazard Handling

5 Electrocardiography Testing

5.1 ECG Machine Prep & Lead Placement 5.2 Obtaining ECGs & Special Populations 5.3 Artifacts, Troubleshooting & Holter Monitors

6 Phlebotomy Foundations

6.1 Requisitions, Patient Prep & Site Selection 6.2 Tube Additives & Order of Draw 6.3 Venipuncture Technique, Special Needs & Aftercare 6.4 Capillary Puncture

7 Specimens, Cultures & CLIA-Waived POC

7.1 Urine Collection (Adult & Pediatric) 7.2 Cultures, Smears, Labeling & Documentation 7.3 Quality Control & CLIA-Waived POC Testing 7.4 Chain-of-Custody Testing

8 Diagnostic Tests & Lab Results

8.1 Vision & Respiratory Testing; Assisting Providers 8.2 Normal/Abnormal Lab Values & Reporting 8.3 Specimen Preservation Methods

9 Patient Intake

9.1 Patient Identification & Medical History 9.2 Body Measurements & Pediatric Growth Charts 9.3 Vital Signs Measurement & Abnormal Values

10 Assisting with Physical Examinations & Procedures

10.1 Room Prep, Positioning & Assisting the Provider 10.2 Surgical Asepsis & Minor Procedure Prep 10.3 Wound Care, Irrigation, Post-Care & Ambulation

11 Administration of Medications

11.1 Drug Classes, Legal Requirements & Storage 11.2 Seven Rights & Dosage Calculations 11.3 Oral & Parenteral Routes, Sites & Equipment 11.4 Vaccinations, Prescriptions & Patient Teaching

12 Office Reception

12.1 Greeting, Emergency Triage & Demographics 12.2 Phones, Scheduling Techniques & Reminders 12.3 Lab Results Routing & Referrals

13 Medical Record Management

13.1 EHR Systems, POMR/SOMR & Immunization Records 13.2 Filing, HIPAA Storage & Record Release 13.3 EHR Lockout & Documenting Medical Errors

14 Patient Care Coordination & Education

14.1 Healthcare Team Roles & Care Coordination 14.2 Patient Education: Self-Exam, Nutrition & Materials

15 Billing & Insurance

15.1 Patient Billing, Payments, Deposits & Collections 15.2 Insurance Verification & Prior Authorization 15.3 Claims, Coding, Appeals & CMS/Private Plans

16 Medical Office Management

16.1 Opening/Closing, Inventory & Correspondence 16.2 Office Safety, Emergencies & SDS

17 Exam Strategy & Final Review

17.1 Test-Day Strategy, Domain Weights & Retake Path

6.2 Tube Additives & Order of Draw

Key Takeaways Explain This Topic AI

Know color-coded tops with additives: sterile/SPS cultures, light-blue citrate, red/gold serum, green heparin, lavender/pink EDTA, gray fluoride-oxalate.

CLSI venipuncture order of draw: blood culture → light blue → red/gold (serum) → green → lavender/pink → gray (with facility-specific inserts for specialty tubes).

Order of draw prevents additive carryover that falsifies coagulation, chemistry, and hematology results.

Light-blue citrate tubes require a correct blood-to-additive ratio (full draw); underfilling prolongs clotting times.

Invert tubes gently the recommended number of times—never shake; know typical inversion counts by tube type.

Last updated: August 2026

Why Tube Chemistry Is Non-Negotiable on the CMAC

Blueprint items 3.03.7 (additives and color-coded tops) and 3.03.8 (order of draw) are pure memorization-plus-application content inside the 25% specimens weight. Employers and exam writers assume a CMAC can look at a rack of tubes and know what each does , what tests it supports , and in what sequence to fill them. Guessing here produces results that look numeric and precise—and are clinically wrong.

3.03.7 Color-Coded Tops and Additives

Evacuated tubes contain a vacuum that pulls a target volume of blood into a measured additive. Additive function determines specimen type: whole blood , plasma (anticoagulated, still contains fibrinogen), or serum (after clotting; fibrinogen consumed in the clot).

Master additive table

Stopper color (common) Additive(s) Mechanism (exam level) Specimen Common tests

Yellow (SPS) / blood culture bottles SPS (sodium polyanethol sulfonate) or culture media Anticoagulant; reduces complement/phagocytosis effects in culture systems Whole blood for culture Blood cultures

  • Light blue Sodium citrate Binds calcium reversibly Plasma (citrated) PT/INR, aPTT, D-dimer, other coagulation
  • Red (glass) None Blood clots naturally Serum Some serology, blood bank (facility-specific)
  • Red (plastic) / clot activator Silica clot activator Speeds clotting Serum Chemistry/serology per lab

Gold / tiger / SST Clot activator + separator gel Clot then gel barrier Serum Many chemistry panels, serologies

Green (light/dark) Lithium or sodium heparin Activates antithrombin → blocks thrombin Plasma STAT chemistry, ammonia (ice), some specialized tests

Lavender / purple EDTA (K2 or K3) Chelates calcium; preserves cell morphology Whole blood CBC, HbA1c, ESR (method-dependent), blood films

Pink EDTA Same as lavender; blood-bank labeling standards Whole blood Type and screen, crossmatch

Gray Sodium fluoride + potassium oxalate Fluoride = antiglycolytic (preserves glucose); oxalate = anticoagulant Plasma Glucose, lactate (protocol-specific), some ethanol protocols

Royal blue EDTA, heparin, or none (trace-element certified) Depends on label Serum or plasma Trace metals (lead, zinc, copper)—follow additive on label

Yellow (ACD) Acid citrate dextrose Citrate + nutrients for cells Whole blood Some DNA/HLA, specialty collections

Serum vs plasma vs whole blood (quick drill):

Serum — clotted tube (red/gold); no anticoagulant; used for many chemistry and serology assays.

Plasma — anticoagulant tube spun; contains fibrinogen; citrate, heparin, oxalate systems.

Whole blood — not clotted; EDTA CBC is the classic example.

Inversions (gentle end-over-end, never shake)

  • Tube Typical inversions
  • Blood culture bottles 8–10
  • Light blue citrate 3–4
  • Red clot activator / gold SST 5
  • Green heparin 8–10
  • Lavender/pink EDTA 8–10
  • Gray fluoride 8–10
  • Glass plain red (no additive) None required

Too few inversions → microclots, platelet clumping, rejected CBCs. Shaking → hemolysis (falsely ↑ potassium, LD, AST, etc.).

Citrate ratio: the “full blue tube” rule

Light-blue tops are calibrated to a 9:1 blood-to-citrate ratio (approximate). Underfilling leaves relative excess citrate → falsely prolonged PT/aPTT. Overfilling (rare with vacuum tubes but possible with poor technique/syringe errors) can shorten times. For butterfly draws, many protocols require a discard tube before the light blue so air in the tubing does not underfill the citrate tube.

3.03.8 CLSI Order of Draw (Venipuncture)

Order of draw is the sequence used when multiple tubes are collected in one venipuncture. The goal is to prevent additive carryover from one tube’s contents into the next via the needle/hub.

Exam-standard sequence (CLSI-based)

Memorize this table cold—it is among the highest-yield CMAC facts in the clinical domain.

Order Tube / bottle Additive focus Why this position

1 Blood culture bottles (or sterile SPS) Sterile culture system Prevents contamination from non-sterile tube tops and carryover into culture media

2 Light blue Sodium citrate Coagulation studies are highly sensitive to clot activators and other additives

3 Red / gold / SST (serum tubes) Clot activator ± gel Serum tubes before anticoagulant carryover into chemistry when possible; after citrate so clot activator does not enter the blue top

4 Green Heparin Plasma chemistry after serum; before EDTA

5 Lavender / pink EDTA Powerful calcium chelator—must not contaminate coagulation or many chemistry tubes drawn earlier

6 Gray Fluoride + oxalate Antiglycolytic last among common tubes; fluoride/oxalate can interfere if carried earlier

Mnemonic many programs use: Cultures → Blue → Red/Gold → Green → Lavender → Gray

(“ C an B loody R eally G ood L abs G uess” or simply B lood cultures, L ight blue, R ed/gold, G reen, L avender, G ray). chartType: bar

data: [{"name":"1 Cultures","value":1},{"name":"2 Light blue","value":2},{"name":"3 Red/Gold","value":3},{"name":"4 Green","value":4},{"name":"5 Lavender","value":5},{"name":"6 Gray","value":6}]

  • title: CLSI Venipuncture Order of Draw (Sequence Position)
  • Specialty tubes in the sequence

Royal blue — place according to its additive (EDTA royal blue behaves with EDTA group; serum royal blue with serum group). Always read the label.

Black ESR (citrate, method-specific) — follow facility order; often near citrate/EDTA rules per manufacturer.

ACD yellow — specialty; not part of the basic six-step memory string unless ordered.

Facility SOPs may insert tubes slightly differently for rare additives; for CMAC , master the culture → citrate → serum → heparin → EDTA → gray backbone.

Why wrong order ruins results (carryover table)

  • If this contaminates that… Typical false effect
  • EDTA → chemistry (green/gold) ↑ potassium , ↓ calcium , ↓ magnesium; enzyme interference
  • EDTA → light blue Calcium chelation wrecks coagulation assays
  • Clot activator / serum tube → light blue May shorten clotting times
  • Heparin → lavender Distorts WBC morphology/staining on films
  • Fluoride/oxalate → chemistry Enzyme inhibition; sodium effects
  • Non-sterile tube before culture False-positive blood culture (skin flora misread as bacteremia)
  • Practical draw technique that supports correct order

Line tubes up in draw order before venipuncture.

Fill blood cultures with meticulous skin and bottle prep first.

Push each tube onto the multi-sample needle until vacuum stops; do not pry early if volume is short unless safety requires it.

Invert each tube immediately after fill, then place it upright in the rack.

For syringe draws, use a transfer device and still respect order of transfer into tubes.

Common CMAC traps on order of draw

Starting with lavender “because CBC is most important.” Clinical priority ≠ tube sequence.

Putting light blue after red/gold. Clot activator carryover threatens coags.

Omitting cultures when ordered. Cultures are first, not “whenever.”

Confusing capillary microcollection order with venous order (capillary order differs—see Section 6.4).

Assuming pink is drawn before light blue. Pink is EDTA—same family as lavender, late in the sequence.

Linking additives to everyday ambulatory orders

  • Typical outpatient order Tube you reach for
  • CBC Lavender EDTA
  • PT/INR on warfarin Light blue
  • CMP / lipid panel Gold SST or green per lab
  • HbA1c Lavender
  • Type and screen Pink EDTA
  • Fasting glucose (dedicated) Gray (or as lab specifies)
  • Blood cultures for fever workup Culture bottles first

If the requisition lists multiple tests, one stick, many tubes, correct order —not six separate sticks. If vacuum fails mid-draw, you may need a new stick with remaining tubes still in proper relative order and full volumes.

Mastery check: cover the color column and recite additive, specimen type, and sequence position. If you can do that in under two minutes, you are exam-ready for 3.03.7–3.03.8.