Study guide

CIP Level 2 Exam Facts and Format

AMPP CIP Level 2 Certified Coatings Inspector

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

CIP Level 2 Exam Facts and Format Prerequisites, Certification Path, and Renewal July 2026 Blueprint and Study Strategy

2 Safety

Process Safety: Equipment and Job-Site Hazards Safety Issues for Specialized Coatings and Prep Methods Environmental Safety Regulations and Regulatory Layers Containment, Waste, VOC, Silica, and Hexavalent Chromium

3 Inspection Planning

Evaluating and Applying Client Written Expectations Purpose and Cost Justification of Inspection Creating Inspection and Test Plans (ITPs) Supporting Job Specifications

4 Inspection Activities & Standards

De Facto, National, and International Standards CIP Level 2 Scope vs Level 1 Responsibilities Verifying Level 1 Work and Applying NACE/AMPP Standards

5 Corrosion Causes

Corrosion Types: General, Localized, Crevice, Flow-Assisted Corrosion Cell and Electrochemical Processes Galvanic Corrosion and Dissimilar Metals

6 Corrosion Effect & Control

Substrate Corrosion Rates, Influencing Factors, and Mitigation Cathodic Protection Systems and Effects on Coatings

7 Environmental Conditions & Inspection

Environmental Requirements and Inspection Concerns Humidity Effects on Corrosion Rates and Coating Risk Dehumidification Systems: Desiccant, Refrigerant, and Heaters Enclosures, Air Movement, and Advanced Environmental Instrumentation

8 Surface Preparation Methods

Prep Methods for Nonferrous, Wood, Concrete, and Polymeric Substrates Surface Contaminants and Acid Cleaning Pickling, Passivation, and Rinse Verification Waterjetting Methods and Removable Materials

9 Surface Prep Equipment & Standards

Concrete Surface Preparation and Standards Abrasive Types, Mixes, and Inspection Considerations Centrifugal Blast Cleaning and Portable/Remote Systems Waterjetting and Centrifugal Blast Standards AB-1/2/3 Media Standards and Special Substrates

10 Coating Application Equipment

Thermal, Electrostatic, and Polyester Spray Applications Plural-Component Systems and Specialty Coating Application Convertible vs Non-Convertible Curing and Polymerization

11 Specialty Coatings & Products

Powder Coatings and Specialized Coating Types Thick-Barrier Linings: Installation and Use Coal-Tar Enamel, Asphalt, and Tape Coatings Maintenance Coating Considerations

12 Pipeline Coatings & Hot-Dip Galvanizing

Hot-Dip Galvanizing Application Process Fusion-Bonded Epoxy (FBE) Pipeline Coating Multi-Layer Polyolefin (3LPE/3LPP) Pipeline Coatings Pipeline Field Joints and Mainline Repair Products Pipeline Coating Importance and Integrity Failure Consequences Concrete on Pipelines and Concrete Coating Standards Concrete Coating Requirements and Cure Verification

13 Coating Inspection: Assessing

Coating Surveys of Existing Systems Coating Defects, Failures, and Detection Criteria Differentiating Adhesion Testing Methods HDG Defects; Nonferrous and Concrete Coating Inspection

14 Coating Inspection: Verification

Instrument Inspections: Verification vs Calibration Concrete Coating Thickness and Destructive Tests Eddy Current and Ultrasonic DFT Methods Cathodic Disbondment and Specialized Lab Testing

15 Documentation

Level 1 Report Review and Failure Documentation for Level 3 Documenting Specialty Coatings and Developing Reports Electronic Reporting, Data Storage, and Retention Maintenance Coating Surveys and Standards Bodies Product Data Sheets and Hot-Dip Galvanizing Standards

16 Communications & Teamwork

Certified Inspector Role and CIP Level 2 Limits Owner, Contractor, and Inspector Responsibilities Pre-Job Conference and Coating Condition Assessment Surveyor Defensive Behavior and Conflict Resolution Communication

17 Ethics

Attestation and Ethics of the AMPP-Certified Inspector Addressing and Analyzing Ethical Dilemmas Positive Suggestions That Improve Job Flow and Quality

CIP Level 2 Exam Facts and Format

Key Takeaways Explain This Topic AI

The AMPP Certified Coatings Inspector (CIP Level 2) theory exam uses test code CertifiedCtgsIn and delivers 120 items: 100 scored plus 20 unscored pretest items.

Total seat time is 3 hours: about 10 minutes for tutorial and NDA, then 2 hours 50 minutes for the exam itself at a Pearson VUE CBT site.

Certification requires both the written theory exam and a separate classroom practical exam—passing only one path is not enough.

Candidates use the built-in on-screen TI calculator, or a hand-held unit supplied by the test administrator on request; bringing your own calculator into the testing room is prohibited.

Results are reported as Pass/Fail with domain-level performance feedback; item order is randomized and each question has one best answer.

Last updated: August 2026

CIP Level 2 Exam Facts and Format

Quick Answer: The AMPP Certified Coatings Inspector (CIP Level 2) written exam is a Pearson VUE computer-based test under test code CertifiedCtgsIn . You face 120 items ( 100 scored + 20 unscored ), with 3 hours total seat time ( 10 minutes tutorial/NDA + 2 hours 50 minutes exam). Results are Pass/Fail with domain performance reports. Certification also requires a separate classroom practical exam .

If you are advancing from CIP Level 1, treat this page as your logistics brief. The technical domains come later in this guide; here you lock down name, code, timing, tools, and the two-exam certification model so nothing on test day is a surprise.

Official Test Identity

AMPP’s July 2026 Exam Preparation Guide (EPG) is the source of truth for the written theory exam. Third-party study pages sometimes still list older formats (for example 100 total items or an 11-domain outline). Use the July 2026 facts below and ignore stale mirrors.

  • Detail Official fact (July 2026 EPG)
  • Credential / test name AMPP Certified Coatings Inspector (Level 2)
  • Test code CertifiedCtgsIn
  • Delivery Computer-based testing (CBT) via Pearson VUE
  • Total items 120 multiple-choice
  • Scored items 100
  • Unscored (pretest) items 20
  • Total seat time 3 hours
  • Tutorial / NDA About 10 minutes
  • Exam working time 2 hours 50 minutes
  • Answer format One best answer per item
  • Item order Randomized
  • Score report Pass/Fail plus domain performance feedback

Calculator Built-in on-screen (TI standard or scientific); a test administrator may supply a hand-held calculator on request — never your own

Memorize the test code for registration and confirmation emails. When you check in at Pearson VUE, staff will match your ID to the exam on your appointment; knowing CertifiedCtgsIn helps you verify you are sitting the correct AMPP product.

Two Required Exams: Theory vs Practical

CIP Level 2 is not a single written test. Full certification requires both :

Written theory exam — the CBT described in this section (Pearson VUE; knowledge of inspection process, surface preparation, coatings, documentation, ethics, and related domains).

Classroom practical exam — a hands-on assessment typically delivered with the official CIP Level 2 course (instrument use, procedure application, and demonstrated inspection skills in a controlled classroom/lab setting).

Passing theory alone does not award the Certified Coatings Inspector credential. Passing the practical alone does not either. Plan your calendar so course, practical, and theory scheduling work together—especially if travel or employer approval is involved.

What this guide covers

This study guide targets the written theory blueprint. Practical skills still matter for the classroom exam and for job performance, but the item bank and domain weights you study here map to the CertifiedCtgsIn CBT. Use lab time, instrument practice, and instructor feedback to prepare for the practical; use this guide plus the official course manual and standards for the written exam.

Seat Time and Pacing

3 hours of seat time breaks roughly as follows:

~10 minutes — computer tutorial and non-disclosure agreement (NDA). Read the NDA carefully; you must accept it to proceed.

2 hours 50 minutes — the exam proper (120 items).

A simple pacing target: about 1.4 minutes per item if you use the full working window evenly (170 minutes ÷ 120 ≈ 1.42 min/item). In practice, flag calculation-heavy or multi-standard items and return after a first pass. Because 20 items are unscored , you cannot tell scored from pretest items—treat every question seriously.

CBT behavior that affects strategy

Randomized items mean you will not see domains in a fixed order. Do not wait for a “surface prep section” to appear as a block.

One best answer means distractors can be partially true. Choose the option that best matches AMPP/NACE/SSPC-style standards language and the scenario’s constraints.

Domain performance reports after Pass/Fail help you target weak areas for renewal study and job performance—even when you pass, note domains that flagged low.

Allowed Tools and Testing-Room Rules

Pearson VUE and AMPP rules prohibit personal electronic devices in the secure testing room. For CIP Level 2 theory:

Allowed: the built-in on-screen calculator provided by the testing software (TI standard or TI scientific mode). If you find the on-screen calculator hard to use, the July 2026 EPG says you may raise your hand and ask the test administrator for a hand-held calculator; one is supplied if available .

Not allowed: personal calculators, phones, smartwatches, notes, standards books, or other reference materials (unless AMPP/Pearson VUE explicitly state otherwise for a future form—assume closed book).

Practice DFT conversions, WFT calculations, and simple environmental math with a basic four-function or scientific on-screen style calculator so the interface does not slow you down. Do not depend on programmable or graphing calculator features you will not have.

Sample-Item Awareness (Logistics, Not Full Domain Teaching)

The July 2026 EPG and related prep materials use sample-style topics to show how written items feel. You do not need full mastery of every specialty here—later chapters teach the domains in depth—but you should recognize what kind of judgment sample themes demand:

Sample theme What the item is testing (logistics of thinking)

Hot-dip galvanizing (HDG) bare spots Distinguishing coating/galvanizing defects and when a condition is rejectable vs. acceptable under inspection criteria

Tooke gauge and DFT Linking a destructive dry-film thickness method (Tooke/paint inspection gauge concepts) to measuring or verifying DFT and coating-layer structure

Silica gel contamination Recognizing contamination or packaging/desiccant issues that affect coating quality or storage-related inspection findings

Localized corrosion Classifying corrosion morphology (localized vs. general) and connecting it to inspection observations and reporting language

When you see these themes on practice tests, ask: What standard or procedure applies? What is the inspector’s scope at Level 2? What must be documented? That exam mindset transfers across all ten domains.

Registration and Day-of Checklist

Confirm Active CIP Level 1 , experience, ethics, and course/practical requirements before you pay for theory (see the next section).

Register for CertifiedCtgsIn through AMPP’s authorized path and schedule at a Pearson VUE center.

Bring required government-issued ID exactly as the confirmation email specifies.

Arrive early for check-in; lockers typically hold phones and bags.

Complete tutorial/NDA without rushing the NDA language.

Use the on-screen calculator only; manage flags and review time deliberately.

Expect Pass/Fail plus domain feedback—not a public scaled score table like some academic exams.

How This Section Connects to the Rest of the Guide

Exam logistics prevent avoidable failures: wrong appointment, poor pacing, calculator surprise, or misunderstanding that practical is separate. Once logistics are solid, invest study hours in the highest-weight domains —Surface Preparation & Inspection ( 18% ), Coating Inspection ( 16% ), and Inspection Process ( 15% )—covered in the blueprint section and later chapters.

Bottom line: Know the name, code, 120/100/20 split, 3-hour seat plan, CBT rules, built-in calculator, and dual theory-plus-practical requirement. Then treat every randomized item as if it counts—because you cannot see which twenty do not.