Study guide
6.4 Understanding IR Drop & The Instant-Off Interruption Technique
AMPP CP1 Cathodic Protection Tester Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction & CP Exam Overview
About the AMPP CP1 Tester Exam & Certification Path How to Study for CP1 & Navigate This Guide Corrosion Science & Industry Terminology Glossary Field Mathematics & Ohm's Law Fundamentals AMPP Ethics for the Corrosion Professional
2 Chapter 2: Fundamentals of Electrochemistry & Corrosion Cells
2.1 The Corrosion Cell: Anode, Cathode, Electrolyte & Metallic Path 2.2 Anodic & Cathodic Reactions on Carbon Steel 2.3 Galvanic Series & Electromotive Force (EMF) Series 2.4 Forms of Corrosion: Uniform, Galvanic, Pitting & Crevice 2.5 Factors Affecting Corrosion Rates: Oxygen, pH, Temperature & Flow
3 Chapter 3: Principles of Cathodic Protection
3.1 Cathodic Protection Theory & Mixed-Potential Diagrams 3.2 Galvanic (Sacrificial Anode) CP Systems 3.3 Impressed Current Cathodic Protection (ICCP) Systems 3.4 Sacrificial Anode Materials: Mg, Zn, & Al Alloys 3.5 ICCP Anode Materials: MMO, Graphite, HSCI, & Platinum
4 Chapter 4: Electrical Circuit Analysis for CP
4.1 Ohm's Law Applications in CP Circuits 4.2 Series & Parallel Resistance in CP Groundbeds & Piping 4.3 Kirchhoff's Voltage & Current Laws in Network Piping 4.4 Shunts: Types, Ratings & Current Calculations 4.5 Rectifier Operation & Transformer Tap Adjustments
5 Chapter 5: Reference Electrodes & Half-Cell Potentials
5.1 Copper/Copper Sulfate (CSE) Reference Electrode Construction & Maintenance 5.2 Silver/Silver Chloride (Ag/AgCl) & Zinc Reference Electrodes 5.3 Converting Potentials Between Reference Electrodes 5.4 Reference Electrode Care, Temperature Correction & Contamination Checks 5.5 High-Impedance Voltmeters & Contact Resistance Errors
6 Chapter 6: Field Measurement & Potential Criteria
6.1 Structure-to-Electrolyte Potential Measurement Procedures 6.2 The -850 mV CSE Polarized Criterion (NACE SP0169) 6.3 The 100 mV Polarization Decay Criterion 6.4 Understanding IR Drop & The Instant-Off Interruption Technique 6.5 Native, On, Polarized, & Off Potentials Comparison
7 Chapter 7: Advanced Field Survey Techniques
Soil Resistivity Testing: Wenner 4-Pin Method (ASTM G57) Soil Pin Spacing, Layering & Corrosivity Classification Close Interval Potential Surveys (CIPS) Direct Current Voltage Gradient (DCVG) Coating Fault Surveys Cathodic Protection Coupons for IR-Free Potential Measurements
8 Chapter 8: Test Stations, Isolation & Stray Current
8.1 Test Station Types, Lead Wires & Commissioning Inspection 8.2 Electrical Isolation Joints & Dielectric Flange Testing 8.3 Casing Isolation & Shorted Casing Testing 8.4 DC Stray Current Interference: Detection & Mitigation 8.5 AC Stray Current Interference & Induction Hazards (NACE SP0177)
9 Chapter 9: Industry Standards & Field Documentation
9.1 NACE SP0169: External Corrosion Control Overview 9.2 NACE TM0497: Measurement Techniques Standard 9.3 Regulatory Compliance: PHMSA, DOT, & EPA Requirements 9.4 CP Data Collection, Logging & Quality Assurance 9.5 Rectifier Maintenance & Routine Inspection Logs 9.6 Anode Groundbed Testing & Resistance Measurements
10 Chapter 10: Electrical & Operational Safety for CP Personnel
10.1 Rectifier Electrical Safety, Lockout/Tagout (LOTO) & NFPA 70E 10.2 AC Induction Hazards Near High-Voltage Power Lines 10.3 Hazardous Atmospheres & Confined Space Safety at Test Vaults 10.4 Personal Protective Equipment (PPE) & Arc Flash Protection 10.5 Excavation, Trenching & Underground Utility Location (811) 10.6 Stop-Work Authority & Emergency Response Procedures
6.4 Understanding IR Drop & The Instant-Off Interruption Technique
Key Takeaways Explain This Topic AI
IR drop is a voltage drop in the measurement circuit caused by CP current flowing through the resistance of the soil and coating.
If not accounted for, IR drop makes the structure appear more negatively polarized than it truly is, leading to false assumptions of protection.
The instant-off technique uses synchronized current interrupters to momentarily stop CP current, causing the IR drop to vanish instantly.
Accurate instant-off measurements require capturing the potential immediately after the switching spike dissipates, typically within 100 to 500 milliseconds.
Last updated: July 2026
- Understanding IR Drop & The Instant-Off Interruption Technique
- The Physics of IR Drop
To accurately evaluate cathodic protection criteria, one must understand the concept of IR drop. The term "IR drop" is derived directly from Ohm's Law, which states that Voltage (V, or sometimes denoted as E) equals Current (I) multiplied by Resistance (R).
Equation: V = I × R
In the context of cathodic protection, when a pipeline is connected to a rectifier, a direct current (I) flows from the anode groundbed, through the soil, through the holidays (defects) in the pipeline coating, and onto the pipeline. Both the soil and the coating possess inherent electrical resistance (R).
When a CP tester places a reference electrode on the ground above the pipeline to take an 'On' potential measurement, the voltmeter circuit includes the path through the soil and the coating. As the CP current flows through this resistance, it creates a voltage drop (IR drop) across the soil and coating. The voltmeter reads the sum of the true electrochemical potential at the pipe surface plus the IR drop.
Because the CP current flows toward the pipeline, this IR drop always adds to the negative magnitude of the reading. For example, if a pipeline has a true polarized potential of -0.800 V, but the IR drop through a highly resistive dry soil is 0.400 V, the voltmeter will display an 'On' potential of -1.200 V. If the tester accepts this -1.200 V reading at face value, they will incorrectly assume the pipeline is well protected, when in reality it is failing the -850 mV criterion. This false sense of security is why eliminating IR drop is mandated by NACE SP0169.
The Instant-Off Technique
The most universally accepted method for eliminating IR drop is the "Instant-Off" interruption technique. This technique relies on a fundamental difference in electrical and electrochemical physics:
Electrical IR Drop Vanishes Instantly: When the source of CP current is turned off, the current (I) drops to zero immediately at the speed of light. Because V = I × R, when I becomes zero, the IR drop (V) also becomes zero instantaneously.
Electrochemical Polarization Decays Slowly: The protective polarization of the pipeline is a chemical state (a buildup of hydrogen ions and a shift in the electrical double layer at the metal-electrolyte interface). When the current is turned off, this chemical state does not vanish instantly; it slowly dissipates (depolarizes) over a period of hours or days.
By momentarily interrupting the CP current and capturing the potential reading immediately after the current stops but before the polarization has time to decay, the tester obtains the true, IR-drop-free polarized potential.
Synchronized Current Interrupters
In modern CP systems, pipelines are rarely protected by a single rectifier. Multiple rectifiers often influence the same segment of pipe. To completely eliminate the IR drop, all sources of CP current affecting the measurement point must be interrupted simultaneously.
If one rectifier is turned off but an adjacent rectifier is left on, the current from the adjacent rectifier will still flow through the soil and coating at the test point, creating a residual IR drop. To prevent this, CP technicians use GPS-synchronized current interrupters . These devices are installed in the rectifiers and use satellite time signals to open and close their solid-state relays at the exact same millisecond. Typical interruption cycles might be 4 seconds ON and 1 second OFF.
Capturing the Instant-Off Waveform
Reading the instant-off potential is not as simple as looking at a digital multimeter when the interrupter clicks. When a large CP circuit is suddenly opened, the collapse of magnetic fields in the pipeline and the rectifier transformer induces a sharp voltage spike (an inductive kick or switching spike).
If the potential is read at the exact microsecond the switch opens, this inductive spike will corrupt the reading. Therefore, the true instant-off potential must be read in a specific time window:
Wait for the spike to clear: The inductive spike typically dissipates within a few dozen milliseconds.
Read before depolarization begins: The reading must be captured before the electrochemical polarization starts to significantly decay.
Industry consensus dictates that the optimal window to capture the instant-off potential is between 100 and 500 milliseconds (0.1 to 0.5 seconds) after the current interruption.
Modern data loggers, oscilloscopes, and specialized CP voltmeters are designed to capture this high-speed waveform. They digitally record thousands of voltage readings per second during the off cycle, allowing the technician to view the decay curve on a graph and select the exact voltage reading immediately following the dissipation of the inductive spike. This ensures absolute accuracy and compliance with the polarized potential criterion.