Study guide

Cathodic Protection Coupons for IR-Free Potential Measurements

AMPP CP1 Cathodic Protection Tester Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & CP Exam Overview

About the AMPP CP1 Tester Exam & Certification Path How to Study for CP1 & Navigate This Guide Corrosion Science & Industry Terminology Glossary Field Mathematics & Ohm's Law Fundamentals AMPP Ethics for the Corrosion Professional

2 Chapter 2: Fundamentals of Electrochemistry & Corrosion Cells

2.1 The Corrosion Cell: Anode, Cathode, Electrolyte & Metallic Path 2.2 Anodic & Cathodic Reactions on Carbon Steel 2.3 Galvanic Series & Electromotive Force (EMF) Series 2.4 Forms of Corrosion: Uniform, Galvanic, Pitting & Crevice 2.5 Factors Affecting Corrosion Rates: Oxygen, pH, Temperature & Flow

3 Chapter 3: Principles of Cathodic Protection

3.1 Cathodic Protection Theory & Mixed-Potential Diagrams 3.2 Galvanic (Sacrificial Anode) CP Systems 3.3 Impressed Current Cathodic Protection (ICCP) Systems 3.4 Sacrificial Anode Materials: Mg, Zn, & Al Alloys 3.5 ICCP Anode Materials: MMO, Graphite, HSCI, & Platinum

4 Chapter 4: Electrical Circuit Analysis for CP

4.1 Ohm's Law Applications in CP Circuits 4.2 Series & Parallel Resistance in CP Groundbeds & Piping 4.3 Kirchhoff's Voltage & Current Laws in Network Piping 4.4 Shunts: Types, Ratings & Current Calculations 4.5 Rectifier Operation & Transformer Tap Adjustments

5 Chapter 5: Reference Electrodes & Half-Cell Potentials

5.1 Copper/Copper Sulfate (CSE) Reference Electrode Construction & Maintenance 5.2 Silver/Silver Chloride (Ag/AgCl) & Zinc Reference Electrodes 5.3 Converting Potentials Between Reference Electrodes 5.4 Reference Electrode Care, Temperature Correction & Contamination Checks 5.5 High-Impedance Voltmeters & Contact Resistance Errors

6 Chapter 6: Field Measurement & Potential Criteria

6.1 Structure-to-Electrolyte Potential Measurement Procedures 6.2 The -850 mV CSE Polarized Criterion (NACE SP0169) 6.3 The 100 mV Polarization Decay Criterion 6.4 Understanding IR Drop & The Instant-Off Interruption Technique 6.5 Native, On, Polarized, & Off Potentials Comparison

7 Chapter 7: Advanced Field Survey Techniques

Soil Resistivity Testing: Wenner 4-Pin Method (ASTM G57) Soil Pin Spacing, Layering & Corrosivity Classification Close Interval Potential Surveys (CIPS) Direct Current Voltage Gradient (DCVG) Coating Fault Surveys Cathodic Protection Coupons for IR-Free Potential Measurements

8 Chapter 8: Test Stations, Isolation & Stray Current

8.1 Test Station Types, Lead Wires & Commissioning Inspection 8.2 Electrical Isolation Joints & Dielectric Flange Testing 8.3 Casing Isolation & Shorted Casing Testing 8.4 DC Stray Current Interference: Detection & Mitigation 8.5 AC Stray Current Interference & Induction Hazards (NACE SP0177)

9 Chapter 9: Industry Standards & Field Documentation

9.1 NACE SP0169: External Corrosion Control Overview 9.2 NACE TM0497: Measurement Techniques Standard 9.3 Regulatory Compliance: PHMSA, DOT, & EPA Requirements 9.4 CP Data Collection, Logging & Quality Assurance 9.5 Rectifier Maintenance & Routine Inspection Logs 9.6 Anode Groundbed Testing & Resistance Measurements

10 Chapter 10: Electrical & Operational Safety for CP Personnel

10.1 Rectifier Electrical Safety, Lockout/Tagout (LOTO) & NFPA 70E 10.2 AC Induction Hazards Near High-Voltage Power Lines 10.3 Hazardous Atmospheres & Confined Space Safety at Test Vaults 10.4 Personal Protective Equipment (PPE) & Arc Flash Protection 10.5 Excavation, Trenching & Underground Utility Location (811) 10.6 Stop-Work Authority & Emergency Response Procedures

Cathodic Protection Coupons for IR-Free Potential Measurements

Key Takeaways Explain This Topic AI

CP coupons are bare steel samples buried adjacent to a pipeline, designed to simulate a coating holiday on the main structure.

They are electrically connected to the pipeline via a test station, allowing them to receive the same cathodic protection current as the pipe.

By momentarily disconnecting the coupon from the pipeline, operators can measure a true IR-free "instant-off" potential without interrupting rectifiers.

Coupons are particularly vital in areas with multiple interference sources, foreign rectifiers, or direct-connected galvanic anodes that cannot be interrupted.

Measuring the disconnected coupon over time allows for the determination of the native (free corrosion) potential, necessary for the 100mV shift criterion.

Last updated: July 2026

  • Cathodic Protection Coupons for IR-Free Potential Measurements
  • The Challenge of IR Drop in Complex Environments

As discussed in previous sections, accurately assessing cathodic protection requires measuring the polarized potential of the structure, free of voltage drop (IR drop) caused by current flowing through the soil. The standard method is to synchronously interrupt all rectifiers influencing the pipeline and measure the "instant-off" potential.

However, in many real-world scenarios, interrupting all current sources is impossible. Examples include:

Pipelines protected by directly welded galvanic (sacrificial) anodes that have no test station switch to break the circuit.

Complex pipeline corridors with severe stray current interference from foreign, inaccessible rectifiers.

Dynamic stray currents from telluric activity or DC electric transit systems (like subways or mining haulage).

In these situations, taking a traditional interrupted "off" reading will still contain significant IR drop error, rendering the data useless for verifying the -850 mV criterion. The solution to this problem is the installation and measurement of Cathodic Protection Coupons.

What is a CP Coupon?

A CP coupon is a carefully manufactured, precisely sized piece of bare steel. It is fabricated from the same type of steel as the pipeline it is protecting (e.g., API 5L Grade B or X52 carbon steel) to ensure metallurgical compatibility. The coupon is buried in the soil adjacent to the pipeline, typically at pipe depth, in an area representative of the local soil environment.

The coupon represents a simulated, highly controlled "holiday" or coating defect. It features two heavily insulated lead wires that are routed up into an above-ground test station.

Physical Sizing and Current Density Calculations

CP coupons are manufactured in standardized surface areas to allow for direct current density calculations. Common coupon surface areas include:

1 cm 2 1\text{ cm}^2 1 cm 2 ( 0.155 sq in 0.155\text{ sq in} 0.155 sq in ): Used in high-resistivity soils or high-precision micro-holiday monitoring.

10 cm 2 10\text{ cm}^2 10 cm 2 ( 1.55 sq in 1.55\text{ sq in} 1.55 sq in ): The industry standard for pipeline External Corrosion Direct Assessment (ECDA).

100 cm 2 100\text{ cm}^2 100 cm 2 ( 15.5 sq in 15.5\text{ sq in} 15.5 sq in ): Used for simulating larger disbonded coating areas or tank bottom defects.

By measuring the DC current ( I c o u p o n I_{coupon} I co u p o n ​ ) flowing through a calibrated shunt connected in series with the coupon wire inside the test station, the CP tester can calculate the exact cathodic current density ( J c o u p o n J_{coupon} J co u p o n ​ ) arriving at the simulated holiday: J c o u p o n = I c o u p o n A r e a c o u p o n J_{coupon} = \frac{I_{coupon}}{Area_{coupon}} J co u p o n ​ = A re a co u p o n ​ I co u p o n ​ ​

For example, if a 10 cm 2 10\text{ cm}^2 10 cm 2 ( 0.001 m 2 0.001\text{ m}^2 0.001 m 2 ) coupon draws 1.5 mA 1.5\text{ mA} 1.5 mA ( 1500 μ A 1500\ \mu\text{A} 1500 μ A ) of CP current, the current density is: J c o u p o n = 1.5 mA 0.001 m 2 = 1 , 500 mA/m 2 = 1.5 A/m 2 J_{coupon} = \frac{1.5\text{ mA}}{0.001\text{ m}^2} = 1,500\ \text{mA/m}^2 = 1.5\ \text{A/m}^2 J co u p o n ​ = 0.001 m 2 1.5 mA ​ = 1 , 500 mA/m 2 = 1.5 A/m 2

NACE/AMPP guidelines generally recommend a minimum cathodic current density of 10 10 10 to 20 mA/m 2 20\ \text{mA/m}^2 20 mA/m 2 to maintain effective polarization in typical aerated soils.

How Coupons Operate & Instant-OFF Procedure

Inside the test station, one of the coupon's lead wires is connected to a wire coming from the pipeline through a magnetic switch or high-speed electronic interrupter relay. Once connected, the coupon becomes electrically continuous with the pipeline. It begins to receive cathodic protection current from the soil, polarizing to the exact same potential as any real coating defect on the adjacent pipe.

Step-by-Step Measurement Procedure

To take an IR-free reading using a coupon, the operator follows these steps:

Position Reference Electrode: The operator places a portable reference electrode in the soil directly above the buried coupon. Many modern coupon test stations include a permanently buried reference electrode or a PVC access tube to ensure the portable electrode is placed perfectly close to the coupon, further minimizing any local soil IR drop.

Measure ON Potential: The voltmeter is connected between the coupon lead wire and the reference electrode to read the "ON" potential ( E O N E_{ON} E ON ​ ).

Disconnect the Coupon: The operator triggers the magnetic switch or electronic interrupter to momentarily break the connection between the coupon and the pipeline.

Read Instant-Off: The instant the connection is broken, CP current stops flowing specifically to the coupon . Because there is zero current flowing to the coupon, there is zero IR drop ( V = I × R = 0 V = I \times R = 0 V = I × R = 0 ). The voltmeter instantly captures the true, completely IR-free polarized potential ( E O F F E_{OFF} E OFF ​ ) of the coupon within the first 100 milliseconds.

Because the coupon was connected to the pipe and polarized identically to it, the coupon's "instant-off" reading is representative of the IR-free potential of a holiday on the pipeline at that exact location. Crucially, the main pipeline rectifiers never had to be turned off.

Dual-Coupon Setups: Native Potential & 100mV Shift

Coupons offer another massive advantage: they allow operators to easily determine the "native" or free-corrosion potential ( E n a t i v e E_{native} E na t i v e ​ ) of the steel without shutting down the CP system. If a pipeline has been protected for decades, it can take weeks or months for it to fully depolarize to its native state when rectifiers are turned off, making the 100 mV depolarization criterion nearly impossible to measure on the main line.

In a Dual-Coupon Test Station , two identical coupons are buried in the same excavation:

Coupon A (Polarized Coupon): Connected to the pipeline, receiving CP current.

Coupon B (Free-Corroding Native Coupon): Left permanently disconnected from the pipeline.

Because Coupon B remains un-protected in the local soil, it maintains the true native free-corrosion potential of bare steel at that site. The operator can instantly check the 100 mV polarization shift criterion by comparing the instant-off potential of Coupon A to the native potential of Coupon B: Δ E = E O F F ( C o u p o n A ) − E n a t i v e ( C o u p o n B ) \Delta E = E_{OFF\ (Coupon\ A)} - E_{native\ (Coupon\ B)} Δ E = E OFF ( C o u p o n A ) ​ − E na t i v e ( C o u p o n B ) ​

If Δ E ≥ 100 mV \Delta E \ge 100\text{ mV} Δ E ≥ 100 mV (more negative), the 100 mV polarization decay criterion is fully satisfied.

CP Coupon Application Matrix

Coupon Setup / Feature Primary Function Ideal Application Environment

Single Coupon ( 10 cm 2 10\text{ cm}^2 10 cm 2 ) Instant-OFF IR-free potential measurement Non-interruptible galvanic anode systems & foreign rectifier corridors

Dual Coupon Setup Instant 100 mV polarization shift verification Decades-old pipelines where complete system depolarization is impractical

Integral Reference Coupon Zero-soil-path IR-free potential readings High-resistivity dry soils, paved urban areas, or concrete structures

Shunted Coupon Measures localized current density ( J c o u p o n J_{coupon} J co u p o n ​ ) High-risk stray DC interference zones & AC mitigation monitoring

Coupons have revolutionized CP monitoring in complex electrical environments, providing precise, undeniable data where traditional interrupted survey methods fail.