Study guide

Corrosion Science & Industry Terminology Glossary

AMPP CP1 Cathodic Protection Tester Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & CP Exam Overview

About the AMPP CP1 Tester Exam & Certification Path How to Study for CP1 & Navigate This Guide Corrosion Science & Industry Terminology Glossary Field Mathematics & Ohm's Law Fundamentals AMPP Ethics for the Corrosion Professional

2 Chapter 2: Fundamentals of Electrochemistry & Corrosion Cells

2.1 The Corrosion Cell: Anode, Cathode, Electrolyte & Metallic Path 2.2 Anodic & Cathodic Reactions on Carbon Steel 2.3 Galvanic Series & Electromotive Force (EMF) Series 2.4 Forms of Corrosion: Uniform, Galvanic, Pitting & Crevice 2.5 Factors Affecting Corrosion Rates: Oxygen, pH, Temperature & Flow

3 Chapter 3: Principles of Cathodic Protection

3.1 Cathodic Protection Theory & Mixed-Potential Diagrams 3.2 Galvanic (Sacrificial Anode) CP Systems 3.3 Impressed Current Cathodic Protection (ICCP) Systems 3.4 Sacrificial Anode Materials: Mg, Zn, & Al Alloys 3.5 ICCP Anode Materials: MMO, Graphite, HSCI, & Platinum

4 Chapter 4: Electrical Circuit Analysis for CP

4.1 Ohm's Law Applications in CP Circuits 4.2 Series & Parallel Resistance in CP Groundbeds & Piping 4.3 Kirchhoff's Voltage & Current Laws in Network Piping 4.4 Shunts: Types, Ratings & Current Calculations 4.5 Rectifier Operation & Transformer Tap Adjustments

5 Chapter 5: Reference Electrodes & Half-Cell Potentials

5.1 Copper/Copper Sulfate (CSE) Reference Electrode Construction & Maintenance 5.2 Silver/Silver Chloride (Ag/AgCl) & Zinc Reference Electrodes 5.3 Converting Potentials Between Reference Electrodes 5.4 Reference Electrode Care, Temperature Correction & Contamination Checks 5.5 High-Impedance Voltmeters & Contact Resistance Errors

6 Chapter 6: Field Measurement & Potential Criteria

6.1 Structure-to-Electrolyte Potential Measurement Procedures 6.2 The -850 mV CSE Polarized Criterion (NACE SP0169) 6.3 The 100 mV Polarization Decay Criterion 6.4 Understanding IR Drop & The Instant-Off Interruption Technique 6.5 Native, On, Polarized, & Off Potentials Comparison

7 Chapter 7: Advanced Field Survey Techniques

Soil Resistivity Testing: Wenner 4-Pin Method (ASTM G57) Soil Pin Spacing, Layering & Corrosivity Classification Close Interval Potential Surveys (CIPS) Direct Current Voltage Gradient (DCVG) Coating Fault Surveys Cathodic Protection Coupons for IR-Free Potential Measurements

8 Chapter 8: Test Stations, Isolation & Stray Current

8.1 Test Station Types, Lead Wires & Commissioning Inspection 8.2 Electrical Isolation Joints & Dielectric Flange Testing 8.3 Casing Isolation & Shorted Casing Testing 8.4 DC Stray Current Interference: Detection & Mitigation 8.5 AC Stray Current Interference & Induction Hazards (NACE SP0177)

9 Chapter 9: Industry Standards & Field Documentation

9.1 NACE SP0169: External Corrosion Control Overview 9.2 NACE TM0497: Measurement Techniques Standard 9.3 Regulatory Compliance: PHMSA, DOT, & EPA Requirements 9.4 CP Data Collection, Logging & Quality Assurance 9.5 Rectifier Maintenance & Routine Inspection Logs 9.6 Anode Groundbed Testing & Resistance Measurements

10 Chapter 10: Electrical & Operational Safety for CP Personnel

10.1 Rectifier Electrical Safety, Lockout/Tagout (LOTO) & NFPA 70E 10.2 AC Induction Hazards Near High-Voltage Power Lines 10.3 Hazardous Atmospheres & Confined Space Safety at Test Vaults 10.4 Personal Protective Equipment (PPE) & Arc Flash Protection 10.5 Excavation, Trenching & Underground Utility Location (811) 10.6 Stop-Work Authority & Emergency Response Procedures

Corrosion Science & Industry Terminology Glossary

Key Takeaways Explain This Topic AI

A solid grasp of corrosion terminology is crucial for understanding exam questions and communicating effectively in the field.

The four essential components of a corrosion cell are the anode, cathode, metallic path, and electrolyte.

Oxidation occurs at the anode (loss of electrons), while reduction occurs at the cathode (gain of electrons).

Understanding the difference between conventional current flow and electron flow is critical for interpreting circuit diagrams.

Last updated: July 2026

  • Corrosion Science & Industry Terminology Glossary
  • The Importance of Terminology

To succeed on the AMPP CP1 exam and in your career as a cathodic protection tester, you must become fluent in the language of corrosion science and electricity. Misunderstanding a single term in a test question can lead you to the wrong answer. This section provides a detailed glossary of the most critical terms you must know. We will break these down into two main categories: Corrosion Terminology and Electrical Terminology.

  • Core Corrosion Terminology
  • The Corrosion Cell

Corrosion of metals in aqueous environments is an electrochemical process. For this process to occur, a corrosion cell must exist. A corrosion cell consists of four mandatory components. If any one of these is removed, corrosion stops.

Anode : The electrode of a corrosion cell where oxidation occurs. This is the area where metal is lost (corrodes). At the anode, metal atoms lose electrons and become positive ions that dissolve into the electrolyte.

Cathode : The electrode of a corrosion cell where reduction occurs. This is the area that is protected from corrosion. At the cathode, electrons arrive through the metallic path and are consumed in chemical reactions at the surface.

Electrolyte : A chemical substance containing ions that migrate in an electric field. For CP purposes, the electrolyte is usually soil or water. The electrolyte conducts ionic current (the movement of ions) between the anode and cathode.

Metallic Path (Return Circuit) : The physical connection between the anode and cathode that allows electrons to flow from the anode to the cathode. This is usually the pipeline or structure itself, or a wire connecting different parts of the structure.

Electrochemical Reactions

Oxidation : A chemical reaction in which a substance loses electrons. In corrosion, oxidation always occurs at the anode. (Remember the mnemonic: AN OX - Anode Oxidation).

Reduction : A chemical reaction in which a substance gains electrons. In corrosion, reduction always occurs at the cathode. (Remember the mnemonic: RED CAT - Reduction Cathode).

Ion : An electrically charged atom or group of atoms. Cations are positively charged (e.g., F e 2 + Fe^{2+} F e 2 + ), and anions are negatively charged (e.g., C l − Cl^- C l − ).

Cathodic Protection Terms

Cathodic Protection (CP) : A technique to reduce the corrosion rate of a metal surface by making it the cathode of an electrochemical cell.

Galvanic (Sacrificial) Anode : A metal that provides sacrificial protection to another metal that is more noble when electrically coupled in an electrolyte. For example, zinc or magnesium attached to a steel pipe.

Impressed Current Cathodic Protection (ICCP) : A CP system that utilizes an external power source (usually a rectifier) to drive direct current from an anode (e.g., mixed metal oxide) to the structure to be protected.

Reference Electrode (Half-Cell) : A device whose open-circuit potential is constant under similar conditions of measurement, used for measuring the relative potential of other electrodes. The Copper/Copper Sulfate Electrode (CSE) is the most common in soil.

Structure-to-Soil Potential : The voltage difference between a buried metallic structure and the electrolyte, measured using a reference electrode placed in the soil.

Core Electrical Terminology

Understanding electrical terms is vital because CP involves manipulating electrical currents to stop corrosion.

Voltage (Electromotive Force, E or V) : The electrical pressure or driving force that pushes current through a circuit. It is measured in Volts (V) or millivolts (mV). Voltage is the difference in electrical potential between two points.

Current (I) : The rate of flow of electrical charge. It is measured in Amperes (A) or milliamperes (mA).

Resistance (R) : The opposition to the flow of electrical current. It is measured in Ohms ( Ω \Omega Ω ). All materials have some resistance, though it varies widely.

Direct Current (DC) : Electrical current that flows continuously in only one direction. Cathodic protection utilizes DC.

Alternating Current (AC) : Electrical current that reverses its direction of flow at regular intervals (e.g., 60 times a second for standard US power). Rectifiers convert AC power to DC power for ICCP systems.

Current Flow Direction

This is a concept that frequently trips up candidates. There are two ways to describe the flow of electricity:

Electron Flow : The actual physical movement of electrons. Electrons are negatively charged, so they flow from the negative pole to the positive pole. In a corrosion cell, electrons flow through the metallic path from the Anode to the Cathode.

Conventional Current : A historical convention established before the discovery of the electron. It assumes current flows from the positive pole to the negative pole. In the CP industry, unless specifically stated otherwise, we usually speak in terms of conventional current. Therefore, conventional current leaves the Anode, travels through the electrolyte, and enters the Cathode.

Key Exam Tip : Always read questions carefully to see if they are asking for the direction of electron flow or conventional current flow .

Measurement and Circuit Terms

Series Circuit : A circuit where components are connected end-to-end, providing only a single path for current flow. The current is the same everywhere in a series circuit.

Parallel Circuit : A circuit where components are connected across each other, providing multiple paths for current flow. The voltage is the same across all branches of a parallel circuit.

Short Circuit : An abnormal connection of relatively low resistance between two points of different potential in a circuit, often causing a massive increase in current flow.

Isolation (Dielectric) Joint : A fitting used to electrically separate two sections of a metallic structure (e.g., an insulating flange on a pipeline). This is essential for controlling CP current and preventing it from flowing to unintended structures.

By mastering these terms, you will be much better equipped to understand the complex scenarios presented on the CP1 exam. Refer back to this glossary whenever you encounter a term you are unsure about during your studies.