Study guide
9.1 Urine Collection Types and Patient Instruction
AMT Certified Medical Laboratory Assistant CMLA
Track your progress as you read
Finished sections get a check mark.
1 Introduction
1.1 Current Exam Facts 1.2 Blueprint Weights and Study Strategy
2 Chapter 2: Safety Terminology and Infection Control
2.1 Safety, Infection, and OSHA Terminology 2.2 Chain of Infection and Precautions 2.3 Isolation, Aseptic Technique, and Disease Prevention
3 Chapter 3: OSHA, HazCom, and Public-Health Reporting
3.1 OSHA Bloodborne Pathogens and Needlestick Safety 3.2 Hazard Communication, SDS, and GHS 3.3 Mandated Safety Rules and Public-Health Reporting
4 Chapter 4: Quality Assessment and Quality Control
4.1 Quality Control and Assessment Terminology 4.2 QC vs QA, Internal vs External QC, and Proficiency Testing 4.3 Daily QC, Temperature Logs, and Corrective Action 4.4 Instrument Maintenance and Calibration in CMLA Scope
5 Chapter 5: Waived-Test Integrity and Confirmatory Testing
5.1 Off-Label Waived Testing and High-Complexity Default 5.2 Following Manufacturer Instructions for Waived Tests 5.3 Confirmatory and Supplemental Testing
6 Chapter 6: Phlebotomy Foundations
6.1 Phlebotomy Terminology and Equipment 6.2 Serum, Plasma, Whole Blood, and Anticoagulation 6.3 Patient Identification and Container Identification
7 Chapter 7: Venipuncture, Order of Draw, and Specimen Integrity
7.1 Patient Preparation and Physiologic Effects 7.2 Vein Selection and Venipuncture Technique 7.3 Order of Draw and Tube Additives 7.4 Short Draws, Hemolysis, and Plasma-on-Cells Limits
8 Chapter 8: Capillary Collection, Processing, and Legal Specimens
8.1 Capillary Puncture Including Infants 8.2 Post-Care, Labeling, Transport, Processing, and Send-Outs 8.3 Specimens Used as Legal Evidence
9 Chapter 9: Non-Blood Collection and Preanalytical Errors
9.1 Urine Collection Types and Patient Instruction 9.2 Urine Suitability, Storage, Preservatives, and Rejection 9.3 Other Specimens and Time/Temperature Requirements 9.4 Shipping, Slide Prep, Preanalytical Errors, and Complications
10 Chapter 10: Clinical Chemistry
10.1 Clinical Chemistry Terminology and Test Families 10.2 Chemistry Instrumentation, Cleaning, and Maintenance 10.3 Point-of-Care and Waived Chemistry Testing 10.4 Toxicology Within CMLA Scope
11 Chapter 11: Hematology and Coagulation
11.1 Hematology Terminology, Blood Functions, and Cell Types 11.2 Hematology Instrumentation, QC, and Calibration 11.3 Coagulation: PT, PTT, INR, Heparin, and Warfarin 11.4 Point-of-Care and Waived Hematology Tests
12 Chapter 12: Immunology, Serology, and Immunohematology
12.1 Antigen-Antibody Principles 12.2 Blood Types, Rh, and Immunohematology Basics 12.3 Waived Immunology, Serology, and Immunohematology Procedures
13 Chapter 13: Microbiology
13.1 Microbiology Terminology and Specimen Appropriateness 13.2 Aseptic Processing, Storage, and Transport of Micro Specimens 13.3 Media, Cultures, and Procedure Matching 13.4 Stains, KOH, Wet Preps, Reagents, and Controls
14 Chapter 14: Urinalysis and Microscopy
14.1 Urinalysis Terminology 14.2 Waived Urinalysis Procedures and Specimen Handling 14.3 Microscopy Parts, Magnification, Wet Prep, and Cleaning
15 Chapter 15: Basic Anatomy and Physiology
15.1 Anatomy Relevant to Laboratory Testing 15.2 Physiology Relevant to Laboratory Testing
16 Chapter 16: Legal, Ethical, and HIPAA Foundations
16.1 Consent, ABN, Test Ordering, and PPM Restrictions 16.2 Patient's Bill of Rights, Refusal, and Medicolegal Risk 16.3 Professional Appearance, Conduct, and Social Media 16.4 HIPAA Confidentiality and Record Release
17 Chapter 17: Clerical Skills, Communication, and Critical Values
17.1 Reports, Abnormal Results, and Critical-Value Notification 17.2 HIT Data, Inventory, Expirations, and Billing/Coding 17.3 Patient Instruction, Communication, Telephone, and Time Management
9.1 Urine Collection Types and Patient Instruction
Key Takeaways Explain This Topic AI
CLSI PRE05, Processes for the Collection of Urine Specimens, 1st edition (2024), is the current urine-collection guideline and replaces GP16-A3; patient identification remains PRE01.
Random, mid-stream, and clean-catch are not synonyms: random is any void, mid-stream is a portion, and clean-catch adds periurethral cleansing plus a sterile cup, usually for culture.
Female clean-catch: keep labia spread and wipe front to back; male: retract the foreskin if uncircumcised and clean the glans; toilet-trained children follow the same idea with a caregiver, while infant bags are easily contaminated and are poor culture specimens.
For a 24-hour (and other timed) collection, discard the first morning void, save every subsequent void including the next morning void at the same clock time, refrigerate or use the issued preservative per SOP, and send the entire volume.
Drug-screening urine follows chain-of-custody, temperature and volume checks, and seals; it is not a leftover urinalysis cup.
Last updated: August 2026
CMLA Work Area II (Preexamination / Preanalytical Considerations) is 36 items, or 18.0% of the 200-question exam. After phlebotomy (Chapters 6–8), competency 4 covers non-blood collection. II.4.A.1 tests whether you can instruct patients in proper collection and preservation of mid-stream , random , clean-catch , timed collections (including 2-hour , 12-hour , and 24-hour ), and collections for drug screening . You match the order to a method, hand over the right container, give verbal plus written steps, and have the patient repeat the critical points. Guessing a cup from a supply closet is not instruction.
The current Clinical and Laboratory Standards Institute (CLSI) urine guideline is CLSI PRE05 , Processes for the Collection of Urine Specimens , 1st edition (2024). PRE05 replaces GP16-A3 (2009). AMT CMLA-REF-2025-1 lists PRE05 as the urine standard. Patient identification remains CLSI PRE01 ; PRE05 assumes identity is already established and then walks collection, quality assessment, and transport. PRE05 also describes straight-catheter, indwelling-catheter, pediatric, suprapubic, and urostomy collections so you can recognize those labels. CMLA-level teaching still centers on what you explain to an ambulatory patient.
Quick Answer: Random is any void; it is not automatically clean. Mid-stream means skip the first and last urine. Clean-catch adds cleansing (different for female, male, and child) and a sterile cup, usually for culture. For 24-hour urine, discard the first morning void, save everything including the next morning void, and send the entire volume . Drug screens follow chain of custody, not a leftover urinalysis (UA) cup.
Random versus first-morning urine
A random urine is a single void collected at any time, without a timed start or stop. It is the convenience specimen for many dipstick screens, some pregnancy tests, and many chemistry spot tests. Random does not mean dirty, and it does not mean mid-stream. If the order is only "UA, random," a clean dry container and prompt delivery may be enough. If that patient also needs culture, an uncleansed random void is the wrong method.
A first-morning (first-void) specimen is urine that accumulated overnight. It is usually more concentrated, so protein, nitrite, cells, and human chorionic gonadotropin (hCG) are easier to detect. First-morning is still one void. It becomes a clean-catch only if the patient also cleanses and collects mid-stream into a sterile cup.
Mid-stream is a portion; clean-catch is a method
Mid-stream means the patient starts voiding into the toilet, catches the middle portion in the container, then finishes in the toilet. The first urine flushes distal urethral organisms and debris. Mid-stream can be done with or without antiseptic cleansing.
Clean-catch (clean-catch midstream) adds cleansing of the periurethral area , a sterile container, and mid-stream collection so the specimen is suitable for culture . CMLA traps treat random, mid-stream, and clean-catch as synonyms. They are not. A random dirty cup is not a culture specimen. A mid-stream collection into a nonsterile hat is not a clean-catch.
Give the kit: sterile cup, towelettes, and written steps. Tell the patient not to touch the inside of the cup or lid. Label with two identifiers in the patient's presence per SOP (PRE01). Do not pre-label an empty cup the night before and hand it to the wrong person. Do not accept a cup that sat unlabeled on a bathroom counter.
- Type What it is Typical CMLA use Classic trap
- Random Any single void, any time Many UA screens and spot chemistries Calling it a culture specimen
First-morning Overnight-concentrated single void Preferred UA, protein, pregnancy screens Thinking it is automatically clean-catch
- Mid-stream Skip first and last urine Reduces urethral contamination Treating it as cleansing
- Clean-catch Cleanse + sterile cup + mid-stream Urine culture (C&S) Using a nonsterile hat
Timed (2, 12, 24 h) All urine in a defined clock window Clearance, protein, many 24-hour chemistries Sending "a cupful" and dumping the jug
Drug screen Chain-of-custody collection Workplace, legal, or clinical toxicology Pouring leftover UA into a sealed drug cup
Female clean-catch (assistant-level script)
Wash hands. Open the kit without touching the inside of the cup.
Spread the labia with one hand and keep them spread until the cup is filled.
Wipe front to back (toward the anus, never reverse). Typical kits include three towelettes: left fold, right fold, then center over the urethral opening. Use each wipe once and discard it.
Void a small amount into the toilet.
Catch the mid-stream in the cup. Do not let the cup touch skin. Fill to the marked line if one is printed (often about 30–60 mL).
Finish in the toilet. Cap immediately. Do not put toilet paper or a wipe in the cup.
Male clean-catch
Wash hands. If the patient is uncircumcised , retract the foreskin and keep it retracted during cleansing and collection.
Clean the glans with towelettes from the urethral opening outward (follow the printed card).
Void a small amount into the toilet.
Catch the mid-stream in the sterile cup without touching the rim to the penis.
Finish in the toilet. Replace the foreskin. Cap the cup.
Child and infant
A toilet-trained child uses the same clean-catch idea with a caregiver holding the cup and coaching the pause. Do not scold; anxiety produces an empty bladder or a grab from toilet water.
Infants and toddlers who cannot void on command may need a pediatric collection bag after cleansing. Teach caregivers: clean, dry, apply the bag around the genitalia (not over the anus), check frequently, transfer urine to a labeled sterile cup as soon as it appears, and do not leave a bag on overnight. Bag urine is easily contaminated by skin flora. It may be acceptable for some chemistry UA screens; it is a poor culture specimen . Straight catheterization or suprapubic aspiration are PRE05 methods performed by licensed staff, not independently by a Certified Medical Laboratory Assistant (CMLA). Explain why a bag is not "just as good" for culture and follow the SOP for what the laboratory will accept.
Timed collections: 2-hour, 12-hour, and 24-hour
Timed urine measures how much of an analyte is excreted over a defined interval. Common intervals on the CMLA outline are 2-hour , 12-hour , and 24-hour . Creatinine clearance, protein, cortisol, metanephrines, electrolytes, and some stone-risk panels are classic 24-hour tests. A 2-hour collection may appear for selected glucose or urobilinogen protocols in the test directory. The clock and the complete volume are the specimen.
Teach the 24-hour script the same way every time:
The laboratory issues the jug (and the preservative, if the SOP requires it in the jug). Household jars are not acceptable.
On day 1, the patient empties the bladder on waking and discards that first morning void. Write the start time (for example, 07:00). That void formed before the clock started.
Save every drop after that: all day, all night, urine passed with a bowel movement, and urine that would otherwise go down the shower drain.
On day 2, at the same clock time , the patient voids and adds that morning specimen to the jug. That last void completes the 24 hours.
Keep the jug refrigerated or on ice, or use the issued preservative , exactly as the label and SOP say (Section 9.2). Acid preservatives can burn skin; if the SOP says not to void directly onto acid, the patient voids into a clean cup and then pours.
Deliver the entire jug . The laboratory measures total volume . Pouring off "just a cup for the lab" and dumping the rest destroys the result. If two jugs were needed, both go to the lab so they can be combined and mixed.
A 12-hour collection uses the same discard-first, save-all, end-with-a-void logic over 12 hours. Missing a void, adding extra hours, or losing volume to the toilet is a recollection, not a math problem you "fix" by guessing.
Drug-screening collections
Urine for drug screening is often a legal evidence specimen (Chapter 8). II.4.A.1 still requires you to instruct the collection. Follow the workplace or laboratory chain-of-custody SOP, not a routine UA script.
Typical assistant-level points (always overridden by the printed SOP):
Use the kit issued for drugs of abuse: marked cup, temperature strip, seals, and chain-of-custody form.
Explain bladder volume: many programs require a minimum (often about 30–45 mL). The patient may drink a modest amount of water if the SOP allows; they may not add sink water to the cup.
Collection may be witnessed or unwitnessed per the order and regulation. Privacy rules still apply; do not improvise a search.
Read the temperature within the time the SOP specifies (commonly within 4 minutes; an accepted range is often about 90–100°F / 32–38°C). Out-of-range temperature is a collection failure, not a result you "correct" by warming the cup in your hands.
Seal, initial, and document. Transfer per chain of custody. Do not pour a leftover UA into a drug-screen cup.
Confirmatory testing for a positive screen (gas chromatography/mass spectrometry or liquid chromatography/mass spectrometry) is Chapter 5. Your preanalytical job is a sealed, identified, temperature-checked specimen of the correct type.
In practice
A provider orders a urine culture and a 24-hour protein. You issue a sterile clean-catch kit with female or male instructions for the culture, and a labeled 24-hour jug with written start/stop and "save it all" instructions for the protein. You do not tell the patient to put the culture specimen in the acid jug, and you do not accept a random hat specimen as the culture.
Exam traps
Random, mid-stream, and clean-catch are not the same instruction.
Female wipe direction is front to back; uncircumcised male patients retract the foreskin.
Pediatric bags are not equivalent to catheter urine for culture.
24-hour: discard first morning, save the next morning; entire volume matters.
Drug-screen cups are chain-of-custody devices, not leftover UA cups.
When CMLA shows a urine order, name the collection type, the script you would say, and the look-alike method it is not.