Study guide
3.2 Hazard Communication, SDS, and GHS
AMT Certified Medical Laboratory Assistant CMLA
Track your progress as you read
Finished sections get a check mark.
1 Introduction
1.1 Current Exam Facts 1.2 Blueprint Weights and Study Strategy
2 Chapter 2: Safety Terminology and Infection Control
2.1 Safety, Infection, and OSHA Terminology 2.2 Chain of Infection and Precautions 2.3 Isolation, Aseptic Technique, and Disease Prevention
3 Chapter 3: OSHA, HazCom, and Public-Health Reporting
3.1 OSHA Bloodborne Pathogens and Needlestick Safety 3.2 Hazard Communication, SDS, and GHS 3.3 Mandated Safety Rules and Public-Health Reporting
4 Chapter 4: Quality Assessment and Quality Control
4.1 Quality Control and Assessment Terminology 4.2 QC vs QA, Internal vs External QC, and Proficiency Testing 4.3 Daily QC, Temperature Logs, and Corrective Action 4.4 Instrument Maintenance and Calibration in CMLA Scope
5 Chapter 5: Waived-Test Integrity and Confirmatory Testing
5.1 Off-Label Waived Testing and High-Complexity Default 5.2 Following Manufacturer Instructions for Waived Tests 5.3 Confirmatory and Supplemental Testing
6 Chapter 6: Phlebotomy Foundations
6.1 Phlebotomy Terminology and Equipment 6.2 Serum, Plasma, Whole Blood, and Anticoagulation 6.3 Patient Identification and Container Identification
7 Chapter 7: Venipuncture, Order of Draw, and Specimen Integrity
7.1 Patient Preparation and Physiologic Effects 7.2 Vein Selection and Venipuncture Technique 7.3 Order of Draw and Tube Additives 7.4 Short Draws, Hemolysis, and Plasma-on-Cells Limits
8 Chapter 8: Capillary Collection, Processing, and Legal Specimens
8.1 Capillary Puncture Including Infants 8.2 Post-Care, Labeling, Transport, Processing, and Send-Outs 8.3 Specimens Used as Legal Evidence
9 Chapter 9: Non-Blood Collection and Preanalytical Errors
9.1 Urine Collection Types and Patient Instruction 9.2 Urine Suitability, Storage, Preservatives, and Rejection 9.3 Other Specimens and Time/Temperature Requirements 9.4 Shipping, Slide Prep, Preanalytical Errors, and Complications
10 Chapter 10: Clinical Chemistry
10.1 Clinical Chemistry Terminology and Test Families 10.2 Chemistry Instrumentation, Cleaning, and Maintenance 10.3 Point-of-Care and Waived Chemistry Testing 10.4 Toxicology Within CMLA Scope
11 Chapter 11: Hematology and Coagulation
11.1 Hematology Terminology, Blood Functions, and Cell Types 11.2 Hematology Instrumentation, QC, and Calibration 11.3 Coagulation: PT, PTT, INR, Heparin, and Warfarin 11.4 Point-of-Care and Waived Hematology Tests
12 Chapter 12: Immunology, Serology, and Immunohematology
12.1 Antigen-Antibody Principles 12.2 Blood Types, Rh, and Immunohematology Basics 12.3 Waived Immunology, Serology, and Immunohematology Procedures
13 Chapter 13: Microbiology
13.1 Microbiology Terminology and Specimen Appropriateness 13.2 Aseptic Processing, Storage, and Transport of Micro Specimens 13.3 Media, Cultures, and Procedure Matching 13.4 Stains, KOH, Wet Preps, Reagents, and Controls
14 Chapter 14: Urinalysis and Microscopy
14.1 Urinalysis Terminology 14.2 Waived Urinalysis Procedures and Specimen Handling 14.3 Microscopy Parts, Magnification, Wet Prep, and Cleaning
15 Chapter 15: Basic Anatomy and Physiology
15.1 Anatomy Relevant to Laboratory Testing 15.2 Physiology Relevant to Laboratory Testing
16 Chapter 16: Legal, Ethical, and HIPAA Foundations
16.1 Consent, ABN, Test Ordering, and PPM Restrictions 16.2 Patient's Bill of Rights, Refusal, and Medicolegal Risk 16.3 Professional Appearance, Conduct, and Social Media 16.4 HIPAA Confidentiality and Record Release
17 Chapter 17: Clerical Skills, Communication, and Critical Values
17.1 Reports, Abnormal Results, and Critical-Value Notification 17.2 HIT Data, Inventory, Expirations, and Billing/Coding 17.3 Patient Instruction, Communication, Telephone, and Time Management
3.2 Hazard Communication, SDS, and GHS
Key Takeaways Explain This Topic AI
29 CFR 1910.1200 is OSHA's Hazard Communication Standard; it requires chemical labels, a 16-section Safety Data Sheet (SDS) for each product, and employee training.
GHS signal word Danger means a more severe hazard than Warning; Caution is not a GHS signal word, and a label carries only one signal word.
CMLAs most often use SDS Section 2 (hazards), Section 4 (first aid), Section 7 (handling and storage), and Section 8 (exposure controls and PPE).
A chemical hygiene plan is the laboratory's written chemical-safety program; an SDS is the manufacturer document for one product—neither replaces the other.
Secondary containers that remain on the bench must identify the product and communicate its hazards; NFPA 704 uses 4 as most severe, while GHS Category 1 is most severe.
Last updated: August 2026
The OSHA Hazard Communication Standard (HCS) , 29 CFR 1910.1200 , is the federal right-to-know rule for hazardous chemicals. Manufacturers and importers must classify chemical hazards. Employers must pass that information to workers through labels , Safety Data Sheets (SDS) , and training . OSHA aligned HCS with the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS) in 2012, and a 2024 OSHA update further aligns U.S. rules with later GHS revisions. The CMLA outline tests both the HCS workflow and GHS itself because assistants handle bleach, alcohols, and acid reagents around waived and point-of-care testing every shift.
Quick Answer: Read the GHS label —product identifier, Danger or Warning , pictograms, and hazard statements—before you open a bottle. Use SDS Section 2 for hazards, Section 4 for first aid, Section 7 for handling and storage, and Section 8 for PPE. A secondary container that sits on the bench needs a product identifier and hazard information. Do not confuse the NFPA 704 fire diamond (4 = most severe) with GHS categories (Category 1 = most severe).
What Hazard Communication Requires in the Laboratory
HCS applies whenever hazardous chemicals are used at work. The employer must keep an inventory, maintain an SDS for each product, make every SDS accessible on the shift (a binder or an electronic system is acceptable if there is no login barrier in an emergency), leave manufacturer GHS labels intact, label secondary workplace containers, and train employees before they work with the chemicals and again when a new hazard is introduced.
You are not expected to classify chemicals from first principles. You are expected to use the label and SDS instead of a coworker’s nickname for a reagent. "The blue stuff" is not a hazard communication system.
GHS Pictograms and Signal Words
GHS uses standardized pictograms —red diamond frames with black symbols on white—to flag hazard classes. OSHA requires the health-hazard, flame, exclamation-mark, gas-cylinder, corrosion, exploding-bomb, flame-over-circle (oxidizer), and skull-and-crossbones pictograms when those hazards are present. The environmental (dead fish and tree) pictogram is not mandatory under OSHA HCS, even though imported labels may still show it.
- Pictogram Typical laboratory meaning
- Corrosion Skin burns, serious eye damage, corrosive to metals (acids, concentrated bleach)
- Flame Flammable liquids and vapors (ethanol, isopropanol)
- Flame over circle Oxidizer (some bleach and peroxide products)
- Exclamation mark Irritant, skin sensitizer, harmful (acute toxicity Category 4)
- Skull and crossbones Acute toxicity — toxic or fatal
Health hazard Carcinogen, mutagen, reproductive toxin, respiratory sensitizer, target-organ toxicity, aspiration hazard
- Gas cylinder Gases under pressure
- Exploding bomb Explosives; some self-reactives and organic peroxides
Signal words communicate severity. Danger marks more severe hazards. Warning marks less severe hazards. A label carries only one signal word—the more severe one if both would otherwise apply. Caution is not a GHS signal word. If an exam option treats Caution as equivalent to Danger, it is a distractor.
Hazard statements (for example, "Causes severe skin burns and eye damage") and precautionary statements (prevention, response, storage, disposal) complete the label. The product identifier on the bottle must match the identifier on the SDS so you can find the right sheet during a splash.
The 16-Section SDS — Pages Assistants Actually Open
GHS standardized the SDS into 16 numbered sections . OSHA currently enforces the content of Sections 1–11 most directly; Sections 12–15 still appear on almost every sheet even though other agencies govern ecology, disposal, transport, and some regulatory listings. For waived-testing and bench work, four sections do most of the job:
SDS section Title Why the CMLA opens it
2 Hazard(s) identification Pictograms, signal word, hazard class, and hazard statements — what this product can do
4 First-aid measures Eye, skin, inhalation, and ingestion response, including whether to use the eyewash and for how long
7 Handling and storage Incompatibilities (bleach with acid or ammonia), flammable-storage rules, keep-container-closed instructions
8 Exposure controls / PPE Required gloves, eye protection, ventilation, and any occupational exposure limits
Be able to name the others: Section 1 identification (product and supplier), Section 3 composition, Section 5 fire-fighting, Section 6 accidental release (chemical spill), Section 9 physical and chemical properties, Section 10 stability and reactivity, Section 11 toxicology, and Section 16 other information (including the revision date). If bleach hits the eye, start at Section 4 , not Section 16. Section 2 tells you the hazard class; it does not replace the first-aid steps. Section 8 tells you which gloves to put on before the next pour.
Chemical Hygiene Plan Versus SDS
Do not treat the chemical hygiene plan (CHP) and the SDS as the same document. The SDS is the manufacturer or importer document for one chemical or mixture . The CHP is the laboratory’s written program —typically required under the OSHA Laboratory Standard, 29 CFR 1910.1450 —that describes how this laboratory will protect workers: standard operating procedures, PPE policy, fume-hood use, waste handling, training, and the designated chemical hygiene officer .
Document Source Question it answers
SDS Chemical manufacturer or importer What are the hazards of this product, and what first aid and PPE apply?
Chemical hygiene plan The employer / laboratory How does this lab expect me to store, use, spill-respond, and dispose of chemicals?
If the SDS says a reagent is corrosive and the CHP says acids are used only in a designated area with a functioning eyewash, you follow both . The SDS does not replace the CHP, and a CHP binder does not replace the SDS for a new lot of bleach.
Secondary Container Labeling
When you pour 10% bleach into a spray bottle, or aliquot alcohol into a squeeze bottle that will sit at the phlebotomy station, that bottle is a secondary (workplace) container . HCS requires it to carry the product identifier plus words, pictures, symbols, or a combination that communicate the hazards. GHS pictograms and a signal word are the cleanest way to do that. Tape that says only "bleach" with no hazard cue is not enough if someone else could pick the bottle up.
The narrow exception is a portable container intended only for immediate use by the employee who transferred the chemical. Immediate use does not mean "I will get back to it after lunch," and it does not mean "the original bottle is still in the room." If the container remains on the bench for the shift, label it.
Fire Diamond Versus GHS — The Numbering Trap
The NFPA 704 fire diamond is a facility and emergency-response placard, not a GHS label. Blue is health, red is flammability, yellow is instability, and white is special hazards (for example OX for oxidizer, W with a bar for water-reactive). Numbers run 0 (minimal) to 4 (severe) .
GHS hazard categories generally run the opposite direction: Category 1 is the most severe . A GHS Flammable Liquid Category 1 is more dangerous than Category 4. Never translate an NFPA 4 into a GHS 4. Both systems may appear in the same laboratory—NFPA diamonds on a door or cabinet, GHS on the bottle and SDS. Use each system on its own terms.
Reagents Used Around Waived Testing
Sodium hypochlorite (bleach) used to disinfect blood spills is corrosive and may also be classified as an oxidizer. Mixing bleach with acids or ammonia can release chlorine or chloramine gas—that incompatibility is why Section 7 exists. Prepare dilutions fresh when the SOP requires it; old dilute bleach loses available chlorine and then fails as a disinfectant and remains a chemical hazard.
Ethanol and isopropanol used as antiseptics and in some waived-test wipes are flammable liquids . Keep ignition sources away, recap bottles, and store bulk stock per the CHP (often a flammable cabinet). Expect a GHS flame pictogram plus Danger or Warning depending on flash point and concentration. An open alcohol bottle next to a bunsen burner or a heat block is a HazCom failure, not a BBP failure.
Acid reagents around some waived or point-of-care chemistry and occult-blood systems carry the corrosion pictogram. Splash risk makes the eyewash and Section 4 first-aid steps part of ordinary use. Neutralize and absorb chemical spills per SDS Section 6 and the CHP. Do not treat an acid spill as if it were a blood spill, and do not treat a blood spill as if the only issue were the acid in the cleaner. When both hazards are present, apply both standards.