Study guide
2.2 Chain of Infection and Precautions
AMT Certified Medical Laboratory Assistant CMLA
Track your progress as you read
Finished sections get a check mark.
1 Introduction
1.1 Current Exam Facts 1.2 Blueprint Weights and Study Strategy
2 Chapter 2: Safety Terminology and Infection Control
2.1 Safety, Infection, and OSHA Terminology 2.2 Chain of Infection and Precautions 2.3 Isolation, Aseptic Technique, and Disease Prevention
3 Chapter 3: OSHA, HazCom, and Public-Health Reporting
3.1 OSHA Bloodborne Pathogens and Needlestick Safety 3.2 Hazard Communication, SDS, and GHS 3.3 Mandated Safety Rules and Public-Health Reporting
4 Chapter 4: Quality Assessment and Quality Control
4.1 Quality Control and Assessment Terminology 4.2 QC vs QA, Internal vs External QC, and Proficiency Testing 4.3 Daily QC, Temperature Logs, and Corrective Action 4.4 Instrument Maintenance and Calibration in CMLA Scope
5 Chapter 5: Waived-Test Integrity and Confirmatory Testing
5.1 Off-Label Waived Testing and High-Complexity Default 5.2 Following Manufacturer Instructions for Waived Tests 5.3 Confirmatory and Supplemental Testing
6 Chapter 6: Phlebotomy Foundations
6.1 Phlebotomy Terminology and Equipment 6.2 Serum, Plasma, Whole Blood, and Anticoagulation 6.3 Patient Identification and Container Identification
7 Chapter 7: Venipuncture, Order of Draw, and Specimen Integrity
7.1 Patient Preparation and Physiologic Effects 7.2 Vein Selection and Venipuncture Technique 7.3 Order of Draw and Tube Additives 7.4 Short Draws, Hemolysis, and Plasma-on-Cells Limits
8 Chapter 8: Capillary Collection, Processing, and Legal Specimens
8.1 Capillary Puncture Including Infants 8.2 Post-Care, Labeling, Transport, Processing, and Send-Outs 8.3 Specimens Used as Legal Evidence
9 Chapter 9: Non-Blood Collection and Preanalytical Errors
9.1 Urine Collection Types and Patient Instruction 9.2 Urine Suitability, Storage, Preservatives, and Rejection 9.3 Other Specimens and Time/Temperature Requirements 9.4 Shipping, Slide Prep, Preanalytical Errors, and Complications
10 Chapter 10: Clinical Chemistry
10.1 Clinical Chemistry Terminology and Test Families 10.2 Chemistry Instrumentation, Cleaning, and Maintenance 10.3 Point-of-Care and Waived Chemistry Testing 10.4 Toxicology Within CMLA Scope
11 Chapter 11: Hematology and Coagulation
11.1 Hematology Terminology, Blood Functions, and Cell Types 11.2 Hematology Instrumentation, QC, and Calibration 11.3 Coagulation: PT, PTT, INR, Heparin, and Warfarin 11.4 Point-of-Care and Waived Hematology Tests
12 Chapter 12: Immunology, Serology, and Immunohematology
12.1 Antigen-Antibody Principles 12.2 Blood Types, Rh, and Immunohematology Basics 12.3 Waived Immunology, Serology, and Immunohematology Procedures
13 Chapter 13: Microbiology
13.1 Microbiology Terminology and Specimen Appropriateness 13.2 Aseptic Processing, Storage, and Transport of Micro Specimens 13.3 Media, Cultures, and Procedure Matching 13.4 Stains, KOH, Wet Preps, Reagents, and Controls
14 Chapter 14: Urinalysis and Microscopy
14.1 Urinalysis Terminology 14.2 Waived Urinalysis Procedures and Specimen Handling 14.3 Microscopy Parts, Magnification, Wet Prep, and Cleaning
15 Chapter 15: Basic Anatomy and Physiology
15.1 Anatomy Relevant to Laboratory Testing 15.2 Physiology Relevant to Laboratory Testing
16 Chapter 16: Legal, Ethical, and HIPAA Foundations
16.1 Consent, ABN, Test Ordering, and PPM Restrictions 16.2 Patient's Bill of Rights, Refusal, and Medicolegal Risk 16.3 Professional Appearance, Conduct, and Social Media 16.4 HIPAA Confidentiality and Record Release
17 Chapter 17: Clerical Skills, Communication, and Critical Values
17.1 Reports, Abnormal Results, and Critical-Value Notification 17.2 HIT Data, Inventory, Expirations, and Billing/Coding 17.3 Patient Instruction, Communication, Telephone, and Time Management
2.2 Chain of Infection and Precautions
Key Takeaways Explain This Topic AI
The chain of infection has six links: infectious agent, reservoir, portal of exit, mode of transmission, portal of entry, and susceptible host.
CDC donning order is gown, mask or respirator, goggles or face shield, then gloves; the respirator is removed last, after leaving an airborne isolation room.
Airborne isolation for tuberculosis, measles, or varicella requires an airborne infection isolation room (AIIR) and a fit-tested N95 respirator.
Use alcohol-based hand rub when hands are not visibly soiled; use soap and water when hands are dirty and for Clostridioides difficile or norovirus per policy.
Gloves do not replace hand hygiene; hand hygiene after glove removal is the highest-yield break in contact transmission.
Last updated: August 2026
Infection spreads only if every link in the chain of infection is intact. Break any one link and transmission stops. CMLA I.1.B.1–2 expects you to name the links, match a laboratory assistant's actual tasks to the link they break, and choose the right isolation layer on top of Standard Precautions.
The six links
Infectious agent — the pathogen (bacterium, virus, fungus, or parasite) with enough virulence and dose to infect.
Reservoir — where the agent lives and multiplies: a patient, a healthcare worker, a fomite (bed rail, tourniquet, keyboard), standing water, or a specimen tube.
Portal of exit — how the agent leaves the reservoir: blood from a needle, respiratory droplets, stool, wound drainage, or aerosol from an uncapped centrifuge tube.
Mode of transmission — how the agent travels to the next person (contact, droplet, airborne, vehicle, or vector).
Portal of entry — how the agent enters the new host: a percutaneous injury, mucous membranes, non-intact skin, or the respiratory tract.
Susceptible host — someone who lacks immunity or has a lowered defense (unvaccinated worker, neonate, oncology patient, uncontrolled diabetes).
If any link is missing, infection does not complete. That is why one missed hand-hygiene moment can finish the chain between two otherwise well-run draws.
Modes of transmission in laboratory work
Mode How it travels Lab / phlebotomy example Typical extra precaution
Contact (direct) Person-to-person physical transfer Unwashed hands after a draw touch the next patient's IV arm Contact isolation: gown and gloves
Contact (indirect) Contaminated object (fomite) Shared tourniquet, glucometer, or phone Dedicated or disinfected equipment
Droplet Large respiratory droplets, about 3–6 feet Influenza, pertussis, meningococcus during close-range talking or coughing Surgical or procedure mask; door may remain open
Airborne Small droplet nuclei that remain suspended Pulmonary tuberculosis, measles, varicella Airborne infection isolation room (AIIR) and fit-tested N95 (or higher) respirator
Vehicle (common vehicle) Contaminated food, water, medication, or blood product Contaminated multi-dose vial or shared fingerstick device Aseptic medication practice; never reuse lancets
Vector Insect or arthropod Rare in U.S. inpatient labs (mosquito, tick) Environmental control; not a typical isolation sign
Do not confuse droplet with airborne. A surgical mask is appropriate for droplet precautions. An N95 respirator is required for airborne isolation; it must be fit-tested and user seal-checked each time you don it. Wearing an N95 just in case for a droplet patient is not a substitute for reading the sign, and a surgical mask is not an N95.
Vehicle transmission is easy to miss on exams because it does not look like a door sign. A glucometer used on sequential patients without disinfection, a reused safety lancet, or a multi-dose diluent vial entered with a dirty needle can infect many people from one reservoir. That is still the chain of infection—mode of transmission is the vehicle.
Standard Precautions versus isolation signage
Standard Precautions stay on for every patient, every draw, and every waived test. Transmission-based precautions are posted on the door or flagged in the electronic health record. In a hospital laboratory or phlebotomy context you:
Read the sign before you enter.
Do not rely on the patient to name the organism.
Add the PPE and room controls the sign requires without dropping gloves, hand hygiene, or sharps safety.
Contact signs typically mean gown and gloves for all contact with the patient and the environment (MRSA, vancomycin-resistant enterococci, Clostridioides difficile , norovirus). For C. difficile and norovirus, facility policy usually requires soap and water rather than alcohol-only hand rub because spores and some non-enveloped viruses are not reliably killed by alcohol. Droplet signs mean a surgical mask within close range. Airborne signs mean a monitored airborne infection isolation room (AIIR) —negative pressure, door closed—and a fit-tested respirator.
Some diseases stack categories. Varicella is often airborne plus contact because skin lesions shed virus and droplet nuclei travel. If signs conflict or the isolation type is unclear, stop and ask the nurse or infection-control resource before entering. Do not just get the draw done.
Breaking the chain: actions a laboratory assistant actually performs
Match the task to the link you are breaking:
Infectious agent: use the assigned hospital disinfectant with the required wet time on chairs, trays, and glucometers; never use a wipe that has already dried.
Reservoir: contain specimens in leak-proof, biohazard-labeled containers; do not store food in the specimen refrigerator; treat used tourniquets and holders as contaminated until cleaned.
Portal of exit: engage the safety device immediately after venipuncture; cover tubes before transport; do not centrifuge uncapped tubes.
Mode of transmission: hand hygiene before and after each patient and after glove removal; never wear the same gloves from one patient to the next; clean shared equipment; follow isolation signage; leave your phone out of isolation rooms.
Portal of entry: keep your own skin intact, cover cuts, never recap with two hands, use a face shield if splash is reasonably anticipated (popping a tube cap, pouring urine).
Susceptible host: maintain immunity (hepatitis B vaccination is the bloodborne example developed in section 2.3), stay home when policy requires if you have a contagious illness, and use extra care on units with immunocompromised patients.
Engineered sharps, the Needlestick Safety and Prevention Act, and the written exposure control plan are Chapter 3. Here, two-handed recapping is simply a portal-of-entry failure you must not commit.
Hand hygiene
Hand hygiene is the highest-yield single break in the chain. Use alcohol-based hand rub when hands are not visibly soiled. Use soap and water when hands are visibly dirty, after using the restroom, and when caring for patients with known or suspected spore-forming or non-enveloped pathogens (C. difficile, norovirus) per CDC and facility policy. Cover all surfaces of the hands and allow alcohol to dry; do not wave wet hands dry and then glove. Gloves do not replace hand hygiene. Remove gloves, then clean hands, even if the gloves did not look dirty. Wearing gloves down the hall to the next room is a contact-transmission error.
PPE donning and doffing order
CDC donning (clean to dirty, before entry):
- Gown
- Mask or respirator
- Goggles or face shield
- Gloves (extended over the gown cuffs)
CDC doffing (most contaminated first; perform hand hygiene as directed between steps and always at the end):
- Gloves
- Goggles or face shield
- Gown
- Mask or respirator — last , and for airborne isolation after leaving the room with the door closed
A common alternative doffs gown and gloves together. Follow your facility's posted sequence, but on CMLA expect the classic CDC order: mask or respirator comes off last , and gloves go on last when donning . Touching the front of a mask or an N95 with contaminated gloves is a classic self-inoculation error (portal of entry through mucous membranes).
N95 versus surgical mask
Device What it does Fit Use
Surgical or procedure mask Blocks large droplets; does not seal to the face Loose Droplet precautions; source control if you are coughing
N95 respirator Filters at least 95% of airborne particles when fitted Tight seal; annual fit test plus user seal check every donning Airborne isolation (tuberculosis, measles, varicella)
Facial hair that breaks the seal, an expired fit test, or a damp crushed N95 means you do not have airborne protection. A surgical mask under an ill-fitting N95 does not fix a failed seal.
Scenario
You are sent to draw a basic metabolic panel on a patient whose door shows airborne isolation. You gather tubes in the hallway, perform hand hygiene, don gown, N95, eye protection, then gloves, enter, keep the door closed, complete the draw, bag the specimen, doff gloves, goggles, and gown in the room, exit, close the door, remove the N95, and perform hand hygiene again. That sequence breaks the mode-of-transmission and portal-of-entry links for you and the next patient.