Study guide
2.4 Electrolytes, Acid-Base Balance, Anion Gap, and Blood Gas Analysis
AMT Medical Laboratory Scientist Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: General Laboratory Operations, Safety & Quality
1.1 Laboratory Safety, OSHA Standards, Hazard Communication, and Biohazard Control 1.2 Quality Systems, Quality Control, and Westgard Rules Interpretation 1.3 Specimen Collection, Handling, Order of Draw, and Phlebotomy Complications 1.4 Laboratory Instrumentation, Photometry, Spectrophotometry, and Centrifugation 1.5 Laboratory Mathematics, Dilutions, Solution Preparation, and Standard Curves 1.6 Regulatory Compliance, CLIA '88 Regulations, Accreditation, and Laboratory Ethics
2 Chapter 2: Clinical Chemistry & Metabolic Testing
2.1 Carbohydrate Metabolism, Glucose Regulation, Diabetes Mellitus, and HbA1c 2.2 Proteins, Non-Protein Nitrogenous Compounds (BUN, Creatinine, Uric Acid), and Renal Function 2.3 Enzymology and Organ Systems 2.4 Electrolytes, Acid-Base Balance, Anion Gap, and Blood Gas Analysis 2.5 Clinical Endocrinology, Thyroid, Adrenal, and Reproductive Hormones 2.6 Clinical Toxicology, Therapeutic Drug Monitoring (TDM), and Pharmacokinetics 2.7 Lipids, Lipoproteins, and the Friedewald LDL Calculation
3 Chapter 3: Hematology & Leukocyte Disorders
3.1 RBC Indices and Anemia 3.2 WBC Differential and Benign Disorders 3.3 Hematologic Malignancies 3.4 Hemoglobin Structure, Hemoglobinopathies (Sickle Cell, Thalassemia), and Variants 3.5 Hematology Automation, Flow Cytometry, and Cell Counting Technology
4 Chapter 4: Coagulation & Hemostasis
4.1 Primary and Secondary Hemostasis, Platelet Function, and Vascular Integrity 4.2 Coagulation Cascade Disorders 4.3 Coagulation Testing and Anticoagulants
5 Chapter 5: Immunology & Serology
5.1 Immune Mechanisms, Hypersensitivity Reactions, and Autoimmune Disease Testing 5.2 Serological Testing Principles and Infectious Serology
6 Chapter 6: Immunohematology & Blood Grouping
6.1 ABO and Rh Blood Group Systems, Antigens, Subgroups, and Weak D Variant 6.2 Red Cell Antibody Screening, Identification Panels, and Dosage Effects 6.3 Direct and Indirect Antiglobulin Testing (DAT/IAT) and Troubleshooting 6.4 Compatibility Testing, Crossmatching, and Hemolytic Disease of the Fetus and Newborn
7 Chapter 7: Blood Banking & Transfusion Medicine
7.1 Blood Donor Selection, Screening, Collection, and Component Storage 7.2 Transfusion Practice, Indications for Blood Components, and Administration 7.3 Transfusion Reactions: Investigation Protocol and Reaction Classification
8 Chapter 8: Clinical Microbiology
8.1 Specimen Processing, Gram Stain, and Aerobic Gram-Positive Cocci 8.2 Gram-Negative Bacilli: Enterobacteriaceae, Non-Fermenters, and Fastidious Organisms 8.3 Anaerobic Bacteria, Mycobacteria, Acid-Fast Stains, and Molecular Diagnostic Methods 8.4 Clinical Mycology and Medical Parasitology 8.5 Antimicrobial Susceptibility Testing, Resistance, and Virology
9 Chapter 9: Urinalysis & Body Fluids
9.1 Physical and Chemical Examination of Urine and Reagent Strip Principles 9.2 Microscopic Urinalysis: Cells, Casts, Crystals, and Renal Pathology 9.3 Analysis of Cerebrospinal Fluid (CSF), Serous Fluids, and Synovial Fluid
2.4 Electrolytes, Acid-Base Balance, Anion Gap, and Blood Gas Analysis
Key Takeaways Explain This Topic AI
Anion gap is calculated as Na - (Cl + HCO3) with a normal reference range of 8-16 mmol/L; elevations indicate unmeasured anions such as ketones or lactate.
Normal arterial blood gas reference ranges are pH 7.35-7.45, pCO2 35-45 mm Hg, and HCO3 22-29 mmol/L.
The Henderson-Hasselbalch equation relates pH to the ratio of bicarbonate (kidney) to dissolved CO2 (lungs): pH = 6.1 + log(HCO3 / (0.03 x pCO2)).
Hemolysis falsely elevates potassium (K+) since it is a major intracellular cation; serum K+ reference range is tightly regulated at 3.5-5.0 mmol/L.
Metabolic acidosis features primary decreased HCO3 and pH, prompting respiratory compensation via hyperventilation to lower pCO2.
Last updated: July 2026
Electrolytes, Acid-Base Balance, Anion Gap, and Blood Gas Analysis
Clinical chemistry relies heavily on the accurate measurement of electrolytes and blood gases to assess a patient's hydration, renal function, and acid-base status. A deep understanding of these interrelated systems is essential for the medical laboratory scientist.
1. Major Electrolytes
Electrolytes are charged ions distributed in the intracellular fluid (ICF) and extracellular fluid (ECF). They maintain osmotic pressure, water balance, and proper muscle and nerve function.
Sodium (Na+)
Role : Major extracellular cation. Determines extracellular osmolality.
Reference Range : 135–145 mmol/L
Regulation : Aldosterone promotes renal reabsorption of sodium; antidiuretic hormone (ADH) regulates water retention, diluting sodium.
Clinical Significance :
Hyponatremia (<135 mmol/L): Can be caused by water retention (SIADH), renal loss (diuretics), or severe burns.
Hypernatremia (>145 mmol/L): Dehydration, diabetes insipidus, or excessive salt intake.
Potassium (K+)
Role : Major intracellular cation. Critical for resting membrane potential of muscle cells, especially the myocardium.
Reference Range : 3.5–5.0 mmol/L
Regulation : Excreted by the kidneys; cellular uptake is stimulated by insulin.
Clinical Significance :
Hypokalemia (<3.5 mmol/L): Vomiting, diarrhea, hyperaldosteronism, or alkalosis (K+ shifts into cells).
Hyperkalemia (>5.0 mmol/L): Renal failure, hypoaldosteronism, acidosis (K+ shifts out of cells).
Exam Trap - Pre-analytical Error : Hemolysis falsely elevates potassium because RBCs are rich in K+. Even slight hemolysis (pink serum) invalidates K+ results. Plasma from a sodium heparin tube is preferred over serum for K+ because platelets release potassium during clotting.
Chloride (Cl-)
Role : Major extracellular anion. Moves passively with sodium to maintain neutrality. "Chloride shift" buffers blood pH.
Reference Range : 98–107 mmol/L
Clinical Significance : Tends to follow sodium. In prolonged vomiting, chloride is lost (hypochloremia), leading to metabolic alkalosis.
Bicarbonate (HCO3-) / Total CO2
Role : Second most abundant extracellular anion; primary blood buffer.
Reference Range : 22–29 mmol/L
Measurement : Total CO2 consists of ~95% HCO3-. Measured via enzymatic methods or Ion-Selective Electrode (ISE).
2. The Anion Gap
The anion gap calculates the difference between routinely measured cations and anions. It evaluates unmeasured anions (e.g., proteins, organic acids, sulfates, phosphates).
Formula and Reference Range
Formula : Na+ - (Cl- + HCO3-) (Note: Sometimes K+ is included, but the exam typically uses the simplified formula without K+).
- Normal Range : 8–16 mmol/L
- Clinical Significance
An elevated anion gap (>16 mmol/L) suggests an accumulation of unmeasured acids. Memorize the mnemonic MUDPILES for high anion gap metabolic acidosis:
- M ethanol
- U remia (renal failure)
- D iabetic ketoacidosis (DKA)
- P araldehyde / Propylene glycol
- I soniazid / Iron / Ischemia
- L actic acidosis
- E thylene glycol
- S alicylates (aspirin overdose)
Quality Control Note : An unusually low or negative anion gap often indicates a laboratory error (such as a failing ISE membrane) or severe hypoalbuminemia (since albumin is a primary unmeasured anion).
3. Acid-Base Balance & The Henderson-Hasselbalch Equation
The body maintains arterial blood pH tightly at 7.35–7.45. This balance relies heavily on the bicarbonate-carbonic acid buffer system.
The Henderson-Hasselbalch Equation
This fundamental clinical formula relates pH to the components of the buffer system:
- pH = pKa + log [ (HCO3-) / (0.03 × pCO2) ]
- pKa : 6.1 (for the carbonic acid system at body temperature)
- HCO3- : Regulated by the kidneys (metabolic component)
pCO2 : Regulated by the lungs (respiratory component); 0.03 is the solubility coefficient of CO2.
Normal ratio of HCO3- to dissolved CO2 is 20:1 . Maintaining this exact ratio keeps pH at 7.40.
4. Arterial Blood Gas (ABG) Interpretation
ABG analysis is essential for diagnosing acid-base disorders and assessing oxygenation. Normal adult arterial ranges are:
- pH : 7.35 – 7.45
- pCO2 : 35 – 45 mm Hg
- HCO3- : 22 – 26 mmol/L
- pO2 : 80 – 100 mm Hg
- Four Primary Acid-Base Disorders
- Disorder Primary Defect Change in pH Compensatory Response
- Metabolic Acidosis Decreased HCO3- Decreased (< 7.35) Hyperventilation (Decreases pCO2)
- Metabolic Alkalosis Increased HCO3- Increased (> 7.45) Hypoventilation (Increases pCO2)
- Respiratory Acidosis Increased pCO2 Decreased (< 7.35) Kidneys retain HCO3-
- Respiratory Alkalosis Decreased pCO2 Increased (> 7.45) Kidneys excrete HCO3-
- Step-by-Step ABG Interpretation
Look at the pH : Is it acidosis (<7.35) or alkalosis (>7.45)?
Look at pCO2 and HCO3- : Which parameter matches the direction of the pH shift?
If pH is low and pCO2 is high, it's respiratory.
If pH is low and HCO3- is low, it's metabolic.
Assess Compensation : Has the other parameter changed to correct the pH? If the pH is still abnormal but the secondary parameter has shifted, it is partially compensated . If the pH has returned to the normal range, it is fully compensated .
Pre-analytical Variables in ABG Testing
Exposure to air (bubbles in syringe) : Increases pO2, decreases pCO2, increases pH.
Prolonged delay without ice : Cellular respiration continues in the tube, causing decreased pO2, increased pCO2, and decreased pH. Specimens must be analyzed quickly (within 30 mins) or kept on an ice slurry.