Study guide

14.2 Periapical, Bitewing & Occlusal Projections

AMT RDA Registered Dental Assistant Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Dental Office Administration, Practice Management & Records

1.1 Appointment Scheduling, Telephone Etiquette & Patient Communication 1.2 Health Information Management, Dental Records & EHR Systems 1.3 Clinical Inventory Control, Supply Purchasing & Equipment Tracking

2 Chapter 2: Dental Law, Ethics, Jurisprudence & Patient Management

2.1 Patient Psychology, Anxiety Management & Communication Strategies 2.2 Dental Jurisprudence, State Practice Acts & Scope of Practice 2.3 Ethics, Malpractice Liabilities & Medication Dispensing Rules 2.4 HIPAA Compliance, Patient Privacy & Confidentiality in Dentistry

3 Chapter 3: Dental Terminology, Tooth Anatomy & Tooth Numbering Systems

3.1 Dental Directional Terminology, Surfaces & Anatomical Landmarks 3.2 Permanent and Deciduous Dentitions, Eruption & Life Cycle 3.3 Tooth Identification, Morphology & Numbering Systems (Universal, FDI, Palmer) 3.4 Periodontium & Tooth Supporting Structures

4 Chapter 4: Head and Neck Anatomy, Oral Cavity & Oral Pathology

4.1 Cranial Bones, Temporomandibular Joint (TMJ) & Muscles of Mastication 4.2 Trigeminal Nerve Innervation, Oral Cavity Vasculature & Salivary Glands 4.3 Oral Pathology: Caries, Periodontal Disease, Mucosal Lesions & Neoplasms

5 Chapter 5: Patient Assessment, Health History & Local Anesthesia

5.1 Patient Medical History, Systemic Disease Alerts & Vital Signs 5.2 Local Anesthetics: Amides, Esters & Vasoconstrictor Guidelines 5.3 Anesthetic Armamentarium, Injection Techniques & OSHA Needle Safety

6 Chapter 6: Medical Emergencies in the Dental Office

6.1 Emergency Armamentarium, Oxygen Delivery & Emergency Drug Kit 6.2 Syncope, Postural Hypotension, Hyperventilation & Nitrous Oxide Complications 6.3 Cardiovascular, Diabetic & Neurologic Emergencies: Angina, MI, Stroke, Hypoglycemia & Seizures 6.4 Allergic Reactions, Anaphylaxis, Asthma & Airway Obstruction

7 Chapter 7: Infection Control, Sterilization & Operatory Asepsis

7.1 Dental Microbiology, Modes of Transmission & Dental Unit Waterlines 7.2 Personal Protective Equipment (PPE) & OSHA Bloodborne Pathogens Standard 7.3 Instrument Sterilization Methods, Packaging & Biological Spore Monitoring 7.4 Surface Disinfection, Environmental Barriers & Regulated Biohazard Waste

8 Chapter 8: Restorative Dental Materials, Cements & Impression Media

8.1 Cavity Liners, Bases & Dental Cements (Glass Ionomer, ZOE, Zinc Phosphate) 8.2 Dental Amalgam & Composite Resins: Chemistry, Placement & Finishing 8.3 Impression Materials: Alginate, Elastomers (PVS, Polyethers) & Bite Registrations 8.4 Gypsum Products, Model Pouring, Trimming, Waxes & Laboratory Resins

9 Chapter 9: Dental Instruments, Handpieces & Equipment Maintenance

9.1 Dental Handpieces, Rotary Burs & Power Scalers 9.2 Handpiece Care, Maintenance, Purging & Sterilization Protocols 9.3 Procedural Tray Setups & Specialty Dental Armamentarium 9.4 Dental Unit Compressors, Central Suction & Vacuum Line Maintenance

10 Chapter 10: Four-Handed Chairside Dentistry & Moisture Control

10.1 Ergonomics, Operator Zones & Patient Positioning 10.2 Four-Handed Instrument Transfer Techniques & Instrument Grasps 10.3 Moisture Control: High-Volume Evacuation (HVE), Saliva Ejectors & Isolation 10.4 Dental Dam Application, Clamps & Armamentarium

11 Chapter 11: Clinical Dental Charting, Operatory Hazards & Preventative Procedures

11.1 Dental Charting, G.V. Black Cavity Classifications & Periodontal Records 11.2 Operatory Chemical Safety, OSHA HazCom & Safety Data Sheets (SDS) 11.3 Coronal Polishing: Principles, Selective Polishing & Clinical Technique 11.4 Dental Fluoride Therapy, Pit and Fissure Sealants & Patient Education

12 Chapter 12: Restorative, Specialty Dental Assisting & Laboratory Procedures

12.1 Chairside Restorative Assisting: Matrices, Wedges & Cavity Preparation 12.2 Endodontic, Periodontic & Oral Surgery Specialty Assisting 12.3 Fixed and Removable Prosthodontics & Orthodontic Assisting 12.4 Dental Laboratory Safety, Equipment, Custom Trays & Appliance Fabrication

13 Chapter 13: Radiation Physics, Radiographic Anatomy & Imaging Principles

13.1 Radiation Physics, X-Ray Generation & Beam Characteristics 13.2 Radiographic Anatomy: Normal Radiolucent and Radiopaque Landmarks 13.3 Analog Radiography: Film Packets, Emulsion & Chemical Processing 13.4 Digital Radiography: CCD, CMOS & Photostimulable Phosphor (PSP) Systems

14 Chapter 14: Intraoral & Extraoral Radiographic Techniques & Image Evaluation

14.1 Paralleling and Bisecting-Angle Techniques & Beam Alignment Devices 14.2 Periapical, Bitewing & Occlusal Projections 14.3 Panoramic Radiography, Cephalometrics & Cone Beam CT (CBCT) 14.4 Radiographic Artifacts, Exposure Errors & Technique Error Remediation

15 Chapter 15: Radiation Safety, Regulatory Compliance & Radiographic Infection Control

15.1 The ALARA Concept, Patient Shielding & Collimation Standards 15.2 Operator Protection, Dosimetry & Maximum Permissible Dose (MPD) 15.3 Environmental Compliance: Lead Foil Recycling, Fixer Silver Recovery & Waste Management 15.4 Infection Control in Dental Radiography & Digital Sensor Asepsis

14.2 Periapical, Bitewing & Occlusal Projections

Key Takeaways Explain This Topic AI

A standard adult Full-Mouth Series (FMS/FMX) consists of 18 to 20 exposures combining anterior and posterior periapicals with bitewings, indicated for comprehensive evaluation in new adult patients with generalized oral disease.

Diagnostic periapical radiographs must show the complete crown, entire root trunk, and a minimum of 2 to 3 mm of healthy alveolar bone beyond the root apex to accurately evaluate periapical health and surrounding structures.

Bitewing radiographs use about +10 degrees of vertical angulation to compensate for the bend of the receptor's upper half and the tilt of the maxillary teeth; vertical bitewings are indicated for patients with moderate to severe periodontal bone loss.

The SLOB rule (Same Lingual, Opposite Buccal) governs radiographic object localization: when the tubehead shifts in a given direction, lingual structures shift in the same direction on the resulting image, whereas buccal structures shift in the opposite direction.

Last updated: October 2026

14.2 Periapical, Bitewing & Occlusal Projections

Intraoral radiography provides the clinician with essential diagnostic views of the crowns, roots, pulp chambers, periodontal attachments, and alveolar bone. Depending on the clinical diagnostic objective, the dental assistant exposes three fundamental types of intraoral projections: periapical (PA) radiographs, bitewing (BWX) radiographs, and occlusal radiographs. Each projection demands meticulous receptor placement, precise horizontal and vertical angulation, and systematic quality assurance to ensure diagnostic efficacy while minimizing patient radiation exposure.

The Full-Mouth Series (FMS / CMS / FMX)

A Full-Mouth Series (FMS) —also referred to as a Complete Mouth Series (CMS) or FMX —is a comprehensive set of intraoral radiographs that displays every tooth, crown, root, intervening contact area, and supporting alveolar bone in both the maxilla and mandible.

Clinical Composition of an Adult FMS

A standard adult FMS typically comprises 18 to 20 individual exposures , combining periapical and bitewing projections:

Anterior Periapicals (6 to 8 exposures): Imaged using narrow Size #1 receptors (or standard Size #2 receptors) oriented vertically . Vertical orientation is mandatory in the anterior region to accommodate the longer root lengths (particularly maxillary canines) and narrow dental arches. A typical series includes:

Maxillary central and lateral incisor projection (midline view or separate right/left views).

Maxillary right and left canine projections.

Mandibular central and lateral incisor projection (capturing all four incisors).

Mandibular right and left canine projections.

Posterior Periapicals (8 exposures): Imaged using standard Size #2 receptors oriented horizontally to accommodate the wider mesiodistal crowns and multi-rooted anatomy of posterior teeth:

Maxillary right premolar and molar projections.

Maxillary left premolar and molar projections.

Mandibular right premolar and molar projections.

Mandibular left premolar and molar projections.

Bitewing Projections (4 exposures): Imaged using Size #2 receptors:

Right premolar and molar bitewings.

Left premolar and molar bitewings.

Clinical Indications & ADA/FDA Selection Criteria

An FMS is never exposed on an arbitrary calendar schedule. In accordance with the ADA/FDA Dental Radiographic Examination Guidelines , intraoral radiographic series must be ordered only after a comprehensive clinical evaluation. Primary indications include:

A new adult patient presenting with clinical evidence of generalized dental disease (multiple active carious lesions, extensive existing restorations, or generalized periodontitis).

A comprehensive diagnostic baseline for full-mouth reconstruction, advanced prosthetic rehabilitation, or complex surgical treatment.

Evaluation of a patient with extensive, severe periodontal destruction where crestal and apical structures cannot be visualized on localized radiographs.

Periapical (PA) Radiographs: Diagnostic Criteria & Anatomy

The periapical radiograph derives its name from the Latin peri (around) and apex (terminal root tip). Its primary diagnostic mission is to evaluate the entire anatomical tooth and its immediate supporting periodontal tissues.

Stringent Diagnostic Quality Criteria

For a periapical radiograph to be considered clinically diagnostic, it must satisfy four mandatory criteria:

Full Coronal and Radicular Visualization: Must capture the entire anatomical crown, the full root length, and the pulp chamber without apex cutoff.

Periapical Alveolar Bone Margin: Must display a minimum of 2.0 to 3.0 mm of intact alveolar bone beyond the anatomical root apex. This surrounding zone of bone is essential for evaluating periapical health.

Open Interproximal Contacts: Contact areas between adjacent target teeth must not overlap horizontally, allowing assessment of proximal restorations and root proximity.

Absence of Technique Artifacts: Free of cone-cutting, elongation, foreshortening, bending distortion, motion unsharpness, or processing/digital errors.

Critical Anatomical & Pathological Features on Periapicals

Lamina Dura: The continuous, thin, dense radiopaque cortical bone lining the tooth socket. Disruption or loss of the lamina dura at the apex is a primary radiographic indicator of periapical inflammation secondary to pulpal necrosis.

Periodontal Ligament (PDL) Space: A thin, uniform radiolucent band (approximately 0.2 mm wide) located between the root cementum and lamina dura. Apical widening of the PDL space signifies early periapical periodontitis or traumatic occlusal loading.

Periapical Pathologies: Detection of periapical radiolucencies (periapical abscess, granuloma, or radicular cyst) and periapical radiopacities (condensing osteitis, hypercementosis, cementoblastoma).

Root Architecture: Visualizes root curvature (dilaceration), developmental anomalies, internal and external root resorption, root fractures following trauma, and root canal morphology prior to endodontic instrumentation.

Bitewing (BWX) Radiographs: Caries Detection & Periodontal Crest Evaluation

The bitewing projection is the single most valuable radiographic view for detecting interproximal caries and assessing crestal alveolar bone height. The patient bites down on a central tab or wing, recording the coronal halves of both maxillary and mandibular arches on a single image.

Diagnostic Objectives & Angulation Rules

Caries Detection: Evaluates early demineralization of interproximal enamel surfaces beneath the contact point, recurrent decay along proximal restorative margins, and occlusal caries penetrating the dentinoenamel junction (DEJ).

Periodontal Bone Height: Displays the alveolar crest in relation to the cementoenamel junction (CEJ). In healthy periodontium, the crest of the alveolar bone resides 1.5 to 2.0 mm apical to the CEJ .

Vertical Angulation (+10 Degrees): When performing bitewing radiographs, the vertical angulation of the PID must be set to +10 degrees (pointing slightly downward). This positive angulation serves two critical anatomical purposes:

It compensates for the slight lingual inclination of maxillary posterior crowns.

It compensates for the slight bending of the bite tab or sensor caused by tongue and palatal resistance when the patient occludes firmly.

Important

Horizontal Angulation for Bitewings: Horizontal overlap is the most common reason for non-diagnostic bitewings. The central ray must be directed directly through the contact spaces perpendicular to the facial surfaces of the teeth. If the beam strikes the contacts diagonally, adjacent enamel surfaces overlap, completely masking early interproximal caries.

Horizontal vs. Vertical Bitewings

Clinical Parameter Horizontal Bitewings Vertical Bitewings

Standard Receptor Size Size #2 (or Size #0 for primary dentition, Size #1 for mixed dentition) Size #2 (or Size #1 in narrow arches)

Receptor Orientation Long axis placed horizontally across teeth Long axis placed vertically across teeth

Number of Exposures Standard 4-view series (2 premolar, 2 molar) 4 to 7 exposures (anterior and posterior views)

Primary Indication Patients with healthy bone or mild bone loss Patients with moderate to severe periodontal bone loss

Crestal Bone Coverage Displays coronal third of roots and normal crestal margin Captures receded crestal bone, vertical infrabony defects, and furcation involvements

In moderate-to-severe periodontitis, the alveolar bone recedes apically toward the middle and apical thirds of the roots. On a standard horizontal bitewing, the receded crest lies entirely below the lower border of the receptor, showing only empty air where the bone should be. Vertical bitewings are preferred for patients with significant bone loss because the vertical dimension provides the necessary vertical coverage to image the receded alveolar crest and root furcations while retaining open interproximal contacts.

Specific Quadrant Alignment for Bitewings

Premolar Bitewing: Must capture the distal half of the mandibular canine, the first and second premolars, the first molar, and open contacts between the first and second premolars.

Molar Bitewing: Must capture the distal half of the second premolar, the first, second, and third molars (if present), centered over the second molar with open contacts between the first and second molars.

Occlusal Projections: Armamentarium & Anatomical Indications

The occlusal projection is an intraoral radiographic examination where the receptor is positioned on the occlusal plane between the biting surfaces of the maxillary and mandibular teeth. The patient gently closes their teeth together to hold the receptor like a sandwich.

Armamentarium & Receptor Sizes

Adults: Utilizes large Size #4 receptors (measuring approximately 57 x 76 mm, often referred to as "sandwich film").

Pediatric Patients: Utilizes standard Size #2 receptors placed horizontally between the arches.

Primary Clinical Indications

Locating Large Pathological Lesions: Retaining large cysts, ameloblastomas, odontogenic tumors, or extensive osteomyelitis lesions that exceed the boundaries of periapical sensors.

Salivary Gland Calculus (Sialolithiasis): Detecting radiopaque salivary stones within the submandibular duct ( Wharton's duct ) or sublingual gland tissues in the floor of the mouth.

Locating Impacted & Supernumerary Teeth: Determining the buccolingual position of impacted maxillary canines, impacted third molars, or midline supernumerary teeth ( mesiodens ).

Maxillofacial Trauma: Identifying fractures of the mandibular symphysis, body, or maxillary alveolar processes when extraoral imaging is unavailable.

Evaluating Cleft Palate: Visualizing bony defects of the hard palate in pediatric and cleft palate patients.

Patients Unable to Tolerate Periapicals: Young children, geriatric patients, or patients with severe trismus (inability to open the mouth) who cannot tolerate periapical bite blocks.

Key Occlusal Projection Techniques

Maxillary Topographic Occlusal Projection:

Patient Position: Head upright with occlusal plane parallel to the floor; midsagittal plane perpendicular to the floor.

Central Ray Angulation: Directed at +65 degrees vertical angulation through the bridge of the nose, centered toward the middle of the #4 receptor.

Anatomy Displayed: Anterior palate, nasal septum, incisive foramen, and maxillary canine-to-canine region.

Mandibular Cross-Sectional (True Occlusal) Projection:

Patient Position: Patient is reclined back, and the head is tipped backward so that the occlusal plane is oriented perpendicular to the floor.

Central Ray Angulation: Directed at 90 degrees to the receptor , entering through the soft tissue floor of the mouth approximately 1 inch below the chin.

Anatomy Displayed: Complete cross-section of the mandible, showing the buccal and lingual cortical plates, anterior teeth, and soft tissues of the floor of the mouth. This is the gold standard intraoral projection for detecting radiopaque sialoliths in Wharton's duct and diagnosing buccal-lingual cortical bone expansion.

Radiographic Localization Techniques: The SLOB Rule

A conventional dental radiograph is a two-dimensional flat representation of a three-dimensional anatomical structure. It depicts vertical height and mesiodistal width, but lacks buccolingual depth. When a radiopaque object (such as an impacted canine, a broken endodontic instrument tip, a foreign body, or a supernumerary tooth) is detected on a radiograph, the clinician must determine whether it lies on the buccal (facial) or lingual (palatal) aspect.

The Buccal Object Rule (Clark's Rule / SLOB Rule)

In 1910, Charles Clark established the buccal object rule , widely memorized by the acronym SLOB: Same Lingual, Opposite Buccal . +--------------------------------------------------------------------------------+

  • | The SLOB Rule (Same Lingual, Opposite Buccal): |
  • | |
  • | Radiograph 1 (Reference): Normal Horizontal Angulation |
  • | Radiograph 2 (Shifted): Tubehead Shifted Distally (or Mesially) |
  • | |
  • | * IF Object moves in the SAME direction as the tubehead shift: |
  • | ===> Object is located on the LINGUAL (Palatal) aspect. |
  • | |
  • | * IF Object moves in the OPPOSITE direction to the tubehead shift: |
  • | ===> Object is located on the BUCCAL (Facial) aspect. |
  • +--------------------------------------------------------------------------------+
  • Clinical Execution Protocol

First Exposure (Reference Radiograph): Expose a standard periapical radiograph of the target region using standard horizontal and vertical angulation.

Second Exposure (Shifted Radiograph): Expose a second periapical radiograph of the same area, but intentionally shift the horizontal angulation of the tubehead mesially or distally (or shift vertical angulation superiorly or inferiorly).

Evaluation: Compare the movement of the unknown object relative to a known anatomical landmark (such as a root canal or tooth crown):

If the object appears to move in the same direction as the tubehead shift , the object is located on the lingual .

If the object appears to move in the opposite direction of the tubehead shift , the object is located on the buccal .

The Right-Angle Technique (Miller's Technique)

The right-angle technique uses two radiographs exposed at a 90-degree right angle to one another: a standard periapical radiograph (showing vertical and mesiodistal coordinates) paired with a cross-sectional occlusal radiograph (showing buccolingual depth). While primarily applicable to the mandible, it provides definitive spatial coordinates for surgical exodontia.

Loading diagram... Buccal Object Rule (SLOB) Localization Dynamics