Study guide

15.4 Infection Control in Dental Radiography & Digital Sensor Asepsis

AMT RDA Registered Dental Assistant Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Dental Office Administration, Practice Management & Records

1.1 Appointment Scheduling, Telephone Etiquette & Patient Communication 1.2 Health Information Management, Dental Records & EHR Systems 1.3 Clinical Inventory Control, Supply Purchasing & Equipment Tracking

2 Chapter 2: Dental Law, Ethics, Jurisprudence & Patient Management

2.1 Patient Psychology, Anxiety Management & Communication Strategies 2.2 Dental Jurisprudence, State Practice Acts & Scope of Practice 2.3 Ethics, Malpractice Liabilities & Medication Dispensing Rules 2.4 HIPAA Compliance, Patient Privacy & Confidentiality in Dentistry

3 Chapter 3: Dental Terminology, Tooth Anatomy & Tooth Numbering Systems

3.1 Dental Directional Terminology, Surfaces & Anatomical Landmarks 3.2 Permanent and Deciduous Dentitions, Eruption & Life Cycle 3.3 Tooth Identification, Morphology & Numbering Systems (Universal, FDI, Palmer) 3.4 Periodontium & Tooth Supporting Structures

4 Chapter 4: Head and Neck Anatomy, Oral Cavity & Oral Pathology

4.1 Cranial Bones, Temporomandibular Joint (TMJ) & Muscles of Mastication 4.2 Trigeminal Nerve Innervation, Oral Cavity Vasculature & Salivary Glands 4.3 Oral Pathology: Caries, Periodontal Disease, Mucosal Lesions & Neoplasms

5 Chapter 5: Patient Assessment, Health History & Local Anesthesia

5.1 Patient Medical History, Systemic Disease Alerts & Vital Signs 5.2 Local Anesthetics: Amides, Esters & Vasoconstrictor Guidelines 5.3 Anesthetic Armamentarium, Injection Techniques & OSHA Needle Safety

6 Chapter 6: Medical Emergencies in the Dental Office

6.1 Emergency Armamentarium, Oxygen Delivery & Emergency Drug Kit 6.2 Syncope, Postural Hypotension, Hyperventilation & Nitrous Oxide Complications 6.3 Cardiovascular, Diabetic & Neurologic Emergencies: Angina, MI, Stroke, Hypoglycemia & Seizures 6.4 Allergic Reactions, Anaphylaxis, Asthma & Airway Obstruction

7 Chapter 7: Infection Control, Sterilization & Operatory Asepsis

7.1 Dental Microbiology, Modes of Transmission & Dental Unit Waterlines 7.2 Personal Protective Equipment (PPE) & OSHA Bloodborne Pathogens Standard 7.3 Instrument Sterilization Methods, Packaging & Biological Spore Monitoring 7.4 Surface Disinfection, Environmental Barriers & Regulated Biohazard Waste

8 Chapter 8: Restorative Dental Materials, Cements & Impression Media

8.1 Cavity Liners, Bases & Dental Cements (Glass Ionomer, ZOE, Zinc Phosphate) 8.2 Dental Amalgam & Composite Resins: Chemistry, Placement & Finishing 8.3 Impression Materials: Alginate, Elastomers (PVS, Polyethers) & Bite Registrations 8.4 Gypsum Products, Model Pouring, Trimming, Waxes & Laboratory Resins

9 Chapter 9: Dental Instruments, Handpieces & Equipment Maintenance

9.1 Dental Handpieces, Rotary Burs & Power Scalers 9.2 Handpiece Care, Maintenance, Purging & Sterilization Protocols 9.3 Procedural Tray Setups & Specialty Dental Armamentarium 9.4 Dental Unit Compressors, Central Suction & Vacuum Line Maintenance

10 Chapter 10: Four-Handed Chairside Dentistry & Moisture Control

10.1 Ergonomics, Operator Zones & Patient Positioning 10.2 Four-Handed Instrument Transfer Techniques & Instrument Grasps 10.3 Moisture Control: High-Volume Evacuation (HVE), Saliva Ejectors & Isolation 10.4 Dental Dam Application, Clamps & Armamentarium

11 Chapter 11: Clinical Dental Charting, Operatory Hazards & Preventative Procedures

11.1 Dental Charting, G.V. Black Cavity Classifications & Periodontal Records 11.2 Operatory Chemical Safety, OSHA HazCom & Safety Data Sheets (SDS) 11.3 Coronal Polishing: Principles, Selective Polishing & Clinical Technique 11.4 Dental Fluoride Therapy, Pit and Fissure Sealants & Patient Education

12 Chapter 12: Restorative, Specialty Dental Assisting & Laboratory Procedures

12.1 Chairside Restorative Assisting: Matrices, Wedges & Cavity Preparation 12.2 Endodontic, Periodontic & Oral Surgery Specialty Assisting 12.3 Fixed and Removable Prosthodontics & Orthodontic Assisting 12.4 Dental Laboratory Safety, Equipment, Custom Trays & Appliance Fabrication

13 Chapter 13: Radiation Physics, Radiographic Anatomy & Imaging Principles

13.1 Radiation Physics, X-Ray Generation & Beam Characteristics 13.2 Radiographic Anatomy: Normal Radiolucent and Radiopaque Landmarks 13.3 Analog Radiography: Film Packets, Emulsion & Chemical Processing 13.4 Digital Radiography: CCD, CMOS & Photostimulable Phosphor (PSP) Systems

14 Chapter 14: Intraoral & Extraoral Radiographic Techniques & Image Evaluation

14.1 Paralleling and Bisecting-Angle Techniques & Beam Alignment Devices 14.2 Periapical, Bitewing & Occlusal Projections 14.3 Panoramic Radiography, Cephalometrics & Cone Beam CT (CBCT) 14.4 Radiographic Artifacts, Exposure Errors & Technique Error Remediation

15 Chapter 15: Radiation Safety, Regulatory Compliance & Radiographic Infection Control

15.1 The ALARA Concept, Patient Shielding & Collimation Standards 15.2 Operator Protection, Dosimetry & Maximum Permissible Dose (MPD) 15.3 Environmental Compliance: Lead Foil Recycling, Fixer Silver Recovery & Waste Management 15.4 Infection Control in Dental Radiography & Digital Sensor Asepsis

15.4 Infection Control in Dental Radiography & Digital Sensor Asepsis

Key Takeaways Explain This Topic AI

Under the CDC Spaulding Classification, intraoral digital sensors, PSP plates, and beam alignment devices are semi-critical items contacting mucous membranes, while tubeheads, PIDs, and lead aprons are non-critical items.

Solid-state digital sensors (CMOS/CCD) cannot tolerate heat sterilization or chemical immersion; they are covered with an FDA-cleared barrier during use and then cleaned and wiped with an intermediate-level (tuberculocidal) disinfectant the manufacturer approves.

Reusable beam alignment assemblies (bite-blocks, indicator arms, and collimator rings) must be disassembled, ultrasonically cleaned, pouched, and heat-sterilized in an autoclave between every patient.

Lead aprons and thyroid collars are non-critical items wiped with an EPA-registered hospital disinfectant between patients and hung or laid flat; folding cracks the internal lead and lets radiation leak through.

Aseptic handling of exposed analog film packets and PSP plates requires wiping saliva chairside, using clean transfer receptacles, and executing glove changes prior to darkroom or scanner plate feeding.

Last updated: October 2026

15.4 Infection Control in Dental Radiography & Digital Sensor Asepsis

Radiographic procedures present complex infection control challenges in the dental operatory. During radiographic imaging, the dental assistant repeatedly moves their hands between the patient's saliva-coated oral cavity and dry operatory equipment—including the x-ray tubehead, collimator cylinder, exposure buttons, computer mice, keyboards, and darkroom hardware. Without meticulous adherence to aseptic technique, pathogens such as Mycobacterium tuberculosis , Hepatitis B virus (HBV), Hepatitis C virus (HCV), Herpes simplex virus (HSV), and Human Immunodeficiency Virus (HIV) can be cross-contaminated across clinical surfaces and transmitted to subsequent patients or dental personnel. The Centers for Disease Control and Prevention (CDC) Guidelines for Infection Control in Dental Health-Care Settings establish explicit protocols governing radiographic asepsis.

The Spaulding Classification in Dental Radiography

In 1968, Dr. Earle Spaulding devised a medical classification system that categorizes patient-care instruments and environmental surfaces according to their inherent risk of transmitting infection. The CDC and ADA apply this classification to all dental radiographic equipment: THE SPAULDING CLASSIFICATION IN RADIOGRAPHY

  • │
  • ┌─────────────────────────────┼─────────────────────────────┐
  • ▼ ▼ ▼
  • ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐
  • │ CRITICAL ITEMS │ │ SEMI-CRITICAL │ │ NON-CRITICAL │
  • │ Penetrate soft │ │ Contact mucous │ │ Contact intact │
  • │ tissue or bone │ │ membranes; no │ │ skin or clinical│
  • │ │ │ penetration │ │ surfaces │
  • │ (None in normal │ │ │ │ │
  • │ dental x-rays) │ │ - Digital CMOS │ │ - Tubehead & PID│
  • │ │ │ - PSP Plates │ │ - Control Panel │
  • │ Must be Heat- │ │ - XCP Aimers │ │ - Lead Apron │
  • │ Sterilized │ │ - Film Packets │ │ - Mouse/Keyboard│
  • └─────────────────┘ └─────────────────┘ └─────────────────┘
  • 1. Critical Items

Instruments that penetrate oral soft tissue, enter the bloodstream, or contact alveolar bone. Critical items present the highest risk of disease transmission and must be heat-sterilized after every use. In routine diagnostic dental radiography, no critical items are employed (unless a surgical radiographic guide penetrates mucosa during implant surgery).

2. Semi-Critical Items

Instruments and devices that contact oral mucous membranes or non-intact skin but do not penetrate bone or soft tissue. In radiography, semi-critical items include:

  • Digital intraoral sensors (CMOS and CCD)
  • Photostimulable phosphor (PSP) storage plates
  • Analog intraoral film packets
  • Beam alignment devices and film holders (bite-blocks, indicator arms, and plastic collimator guide rings)

CDC Guidance: Semi-critical items should be heat-sterilized (or high-level disinfected) between patients. If an item cannot tolerate either (as with digital sensors and phosphor plates), at a minimum it is protected with an FDA-cleared barrier during use and then cleaned and disinfected with an EPA-registered hospital disinfectant with intermediate-level (tuberculocidal) activity between patients.

3. Non-Critical Items and Clinical Contact Surfaces

Devices and surfaces that contact only intact skin or do not directly contact the patient. In radiography, non-critical items and environmental contact surfaces include:

  • X-ray tubehead, yoke, and position-indicating device (PID)
  • Exposure control button, timer dials, and control panel console
  • Lead apron and thyroid collar
  • Operatory dental chair, headrest, and armrests
  • Computer mouse, keyboard, and monitor housing

CDC Guidance: Non-critical items and clinical contact surfaces are barrier-protected or cleaned and disinfected between patients with an EPA-registered hospital disinfectant with low- to intermediate-level activity; use an intermediate-level ( tuberculocidal ) product when they are visibly contaminated with blood.

Operatory Preparation and Surface Barrier Placement

To prevent the transfer of oral fluids to radiographic equipment, the operatory must be prepared prior to seating the patient. Dental assistants must perform hand hygiene, don clean examination gloves, and place disposable plastic barriers over all clinical contact surfaces that will be touched during the appointment:

X-Ray Tubehead and PID: Slide a large plastic sleeve over the tubehead positioning handles, the yoke, and the cylindrical rim of the PID. The PID rim is frequently touched when aligning the beam with intraoral aiming rings.

Control Panel and Exposure Switch: Cover the exposure button, timer dials, and activation switch with plastic wrap or form-fitting polyethylene sleeves. Because exposure buttons contain sensitive electronic relays, spraying liquid disinfectants directly onto the switch can induce internal corrosion, short circuits, or electrical malfunction.

Computer Hardware: Place clear plastic barrier covers over the computer mouse and keyboard. If a touch-screen monitor is utilized, apply an adhesive clear barrier film over the screen.

Operatory Chair: Cover the chair headrest with a plastic sheath, as the patient's hair and neck contact this surface.

Digital Sensor Cable: Slide a 3-to-6-foot plastic tube sheath over the sensor cord, as the cord routinely brushes against the patient's chest and the operator's gloved hands during positioning.

Digital Intraoral Sensor Asepsis: CMOS/CCD and PSP Plates

Solid-state digital sensors (CMOS and CCD) represent a significant financial investment for the dental practice (typically costing $4,000 to $10,000 per sensor ). They contain delicate silicon photodiodes, micro-circuitry boards, and fiber-optic scintillation plates hermetically sealed in ceramic or polymer casings.

Why Digital Sensors Cannot Be Autoclaved

Dental assistants must recognize that solid-state digital sensors CANNOT tolerate steam heat sterilization, dry heat, or chemical autoclaving . Subjecting a digital sensor to autoclave temperatures (121°C to 134°C / 250°F to 273°F) and extreme steam pressure melts the polymer housing, delaminates the fiber-optic faceplate, destroys delicate solder connections, and permanently ruins the microchip, voiding manufacturer warranties. Furthermore, sensors cannot be soaked in liquid chemical sterilants (such as 2.4% glutaraldehyde), because caustic liquids corrode the cable entry boot, seep into the internal circuitry, and destroy the electronics.

Barrier-Plus-Disinfection Protocol for Sensors

Because digital sensors are semi-critical items that cannot be heat-sterilized, CDC guidance calls for an FDA-cleared barrier plus intermediate-level disinfection between patients (always using a disinfectant the sensor manufacturer approves): DIGITAL SENSOR ASEPSIS PROTOCOL

  • │
  • 1. PRE-EXPOSURE: Barrier Sheath Placement
  • Perform hand hygiene & don clean gloves
  • Insert bare sensor into FDA-cleared plastic sheath / finger cot
  • Ensure tight, smooth seal without wrinkles across active sensor face
  • Slide full-length plastic sleeve along entire sensor cord
  • │
  • ▼
  • 2. INTRAORAL EXPOSURE: Patient Positioning
  • Assemble autoclaved XCP beam alignment holder over sheathed sensor
  • Position in patient's oral cavity & complete diagnostic exposure
  • │
  • ▼
  • 3. POST-EXPOSURE: Aseptic Barrier Removal
  • Remove assembly from mouth; wipe saliva with 2x2 gauze
  • Invert plastic sheath inside-out away from sensor body
  • Release bare sensor onto clean, uncontaminated barrier surface
  • Discard saliva-contaminated plastic sheath in regular trash
  • │
  • ▼
  • 4. DECONTAMINATION: Intermediate-Level Disinfection
  • Doff contaminated gloves, sanitize hands, don fresh gloves
  • Wipe entire sensor housing & cord with EPA-registered
  • intermediate-level disinfectant wipe (tuberculocidal claim)
  • Maintain wet contact dwell time per manufacturer instructions (1-3 min)
  • Inspect casing and cable boot for microscopic cracks

Important

Intermediate-Level Disinfection Requirement: The disinfectant wipe used on the bare digital sensor must be an EPA-registered hospital disinfectant with a tuberculocidal claim (effective against Mycobacterium tuberculosis var. bovis ), such as quaternary ammonium formulations combined with alcohol, accelerated hydrogen peroxide, or dual-phenolics. Low-level disinfectants lacking a tuberculocidal claim are not acceptable for barrier-protected semi-critical items under CDC guidance.

Photostimulable Phosphor (PSP) Plate Asepsis

Phosphor storage plates (PSP plates) are cordless, flexible receptors that store latent x-ray energy in europium-doped barium fluorohalide crystals. Like digital sensors, PSP plates cannot be autoclaved, as high heat destroys the luminescent phosphor coating:

Barrier Packaging: Prior to clinical use, each PSP plate is sealed inside an individual, fluid-proof, light-tight plastic barrier envelope . The active phosphor side must face the black exposure side of the envelope.

Chairside Aseptic Removal: Following intraoral exposure, the assistant wipes saliva from the barrier envelope with a clean 2x2 gauze sponge. Using gloved hands, the assistant peels open the adhesive tear-strip of the envelope and carefully drops the bare phosphor plate directly into a clean transfer receptacle (or directly into the scanner loading chute) without touching the bare plate with saliva-contaminated gloves.

Cleaning the Bare Plate: If a PSP plate becomes contaminated with saliva, it is cleaned only by the manufacturer's approved method, because water and many disinfectants can damage the phosphor coating. Manufacturers typically supply or name specific phosphor cleaning wipes (often alcohol-based).

Chairside Handling and Darkroom Transfer of Analog Film

When exposing traditional analog film packets, oral saliva heavily contaminates the outer vinyl packet. Contaminated film packets transferred directly into a darkroom or daylight loader will contaminate darkroom counters, safelight switches, and processor transport rollers:

Chairside Decontamination: Upon removing the exposed film packet from the patient's mouth, the assistant immediately wipes all saliva and blood from the packet using a clean 2x2 gauze sponge. The wiped packet is dropped into a clean, disposable paper cup labeled with the patient's name.

Transfer to Darkroom: The assistant must never touch the outside of the clean paper cup with contaminated gloves . Once all exposures are completed, the assistant removes contaminated gloves, performs hand hygiene, and carries the clean paper cup to the darkroom.

Darkroom Processing Asepsis: Inside the darkroom under safelight illumination, the assistant dons clean examination gloves:

Carefully tear open the outer paper/vinyl packet flaps without touching the bare film emulsion inside.

Allow the bare film to drop freely onto a clean paper towel placed on the counter.

Discard the contaminated packet wrappers and black paper into the trash, and deposit the lead foil sheet into the scrap lead recycling container.

Doff gloves and wash hands before touching the automatic processor feed slot. Feeding bare films into the processor rollers with bare, clean hands prevents transferring microbial contaminants onto the internal processor rollers.

Daylight Loader Precautions: Automatic film processors equipped with daylight loaders feature flexible neoprene light-tight arm cuffs. Daylight loaders present an exceptionally high cross-contamination risk because operators frequently insert contaminated gloved hands through the cuffs. Dental assistants must never insert contaminated gloved hands into a daylight loader. Clean paper cups holding wiped packets, clean gloves, and clean paper barriers must be placed inside the daylight loader compartment before closing the access lid. The operator then inserts clean hands through the cuffs, dons the gloves inside the loader, unwraps the films, feeds them into the rollers, removes gloves inside, and withdraws clean hands.

Beam Alignment Device Sterilization (XCP Assemblies)

Beam alignment assemblies—such as Rinn XCP (Extension Cone Paralleling) instruments—consist of plastic bite-blocks, colored plastic collimator guide rings, and stainless steel indicator arms. Because these devices are placed directly into the patient's oral cavity and contact mucous membranes, they are semi-critical instruments that must undergo heat sterilization between every patient:

Disassembly: Immediately after patient dismissal, the assistant disassembles all bite-blocks, aiming rings, and metal arms. Leaving components assembled during processing traps saliva and cleaning chemicals in joint junctions.

Ultrasonic Cleaning: Disassembled components are placed in an ultrasonic cleaning bath or automated instrument washer containing enzymatic detergent for 10 to 15 minutes to loosen and dissolve biological debris and dried saliva.

Rinsing and Drying: Instruments are thoroughly rinsed with water and patted dry with lint-free paper towels.

Packaging: Components are placed into FDA-cleared sterilization pouches equipped with internal and external chemical indicators. Color-coded components can be bagged as complete sets (e.g., anterior, posterior, bitewing).

Heat Sterilization: Pouches are processed in a calibrated steam autoclave (typically at 121°C / 250°F for 30 minutes, or 132°C / 270°F for 4 to 10 minutes in a high-speed pre-vacuum sterilizer). Chemical cold immersion ("cold sterilization" in glutaraldehyde) is strictly unacceptable when heat-tolerant autoclavable plastics are utilized.

Maintenance and Decontamination of the Lead Apron

The lead apron and thyroid collar are classified as non-critical patient-care items . However, because they are handled by gloved personnel during positioning and rest directly against patient clothing, necks, and skin, they are subjected to saliva spatter and microbial contamination.

Disinfection Protocol

Between every patient, the assistant must decontaminate the lead apron and thyroid collar:

Don utility gloves or fresh examination gloves.

Wipe all front surfaces, back surfaces, and hanging straps with an EPA-registered hospital disinfectant (many offices use the same tuberculocidal wipe they use on clinical contact surfaces; CDC calls for an intermediate-level product when blood is visible).

Allow the surfaces to remain wet for the manufacturer's specified contact dwell time (typically 1 to 3 minutes).

Allow the apron to air-dry completely before hanging or placing on a subsequent patient.

The Critical Storage Rule: Never Fold a Lead Apron

Caution

Strict Storage Mandate: Lead aprons and thyroid collars must NEVER be folded, creased, rolled tightly, or thrown onto operatory counters or chairs!

The protective core of a lead apron consists of a thin, flexible sheet of metallic lead or a lead-rubber composite matrix. When a lead apron is folded, severe mechanical stress is concentrated along the crease line. Repeated folding induces fatigue fracturing of the internal lead sheeting , creating microscopic and macroscopic cracks. These invisible fractures allow primary and scatter radiation to penetrate directly through the apron to the patient's underlying thyroid gland, gonads, and developing fetus, rendering the protective garment useless.

Approved Storage: Lead aprons must always be stored hung flat on specialized heavy-duty lead apron wall racks, multi-arm pivoting apron hangers, or broad, rounded coat hangers designed to distribute weight without creasing.

Quality Assurance Testing: Dental practices must periodically inspect lead aprons for internal shielding integrity. Aprons should be palpated manually every 3 months to detect lumps, tears, or thin spots, and imaged radiographically or under fluoroscopy annually to verify that no internal fractures exist.

Radiographic Device / Surface Spaulding Category Infection Control Standard Permitted Decontamination Method

Digital Sensor (CMOS/CCD) Semi-Critical Dual-barrier + Tuberculocidal wipe FDA plastic sheath; Intermediate wipe (Never Autoclave!)

PSP Phosphor Plates Semi-Critical Barrier envelope + Specialized cleaner Plastic envelope; Anhydrous alcohol wipe (Never Autoclave!)

XCP Beam Alignment Holders Semi-Critical Heat Sterilization Ultrasonic clean; Pouch; Steam Autoclave

X-Ray Tubehead & PID Non-Critical Surface Barrier / Intermediate Wipe Polyethylene sleeve; Tuberculocidal disinfectant wipe

Control Panel & Timer Switch Non-Critical Surface Barrier Protection Plastic barrier wrap; Avoid spraying liquid chemicals

Lead Apron & Thyroid Collar Non-Critical Intermediate-level wipe; Hang flat Tuberculocidal wipe; Hang on wall rack (Never Fold!)

Computer Mouse & Keyboard Clinical Contact Surface Barrier / Intermediate Wipe Disposable plastic covers; Disinfectant wipe

Loading diagram... Aseptic Radiographic Workflow from Setup to Equipment Reprocessing