Study guide
8.3 Impression Materials: Alginate, Elastomers (PVS, Polyethers) & Bite Registrations
AMT RDA Registered Dental Assistant Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Dental Office Administration, Practice Management & Records
1.1 Appointment Scheduling, Telephone Etiquette & Patient Communication 1.2 Health Information Management, Dental Records & EHR Systems 1.3 Clinical Inventory Control, Supply Purchasing & Equipment Tracking
2 Chapter 2: Dental Law, Ethics, Jurisprudence & Patient Management
2.1 Patient Psychology, Anxiety Management & Communication Strategies 2.2 Dental Jurisprudence, State Practice Acts & Scope of Practice 2.3 Ethics, Malpractice Liabilities & Medication Dispensing Rules 2.4 HIPAA Compliance, Patient Privacy & Confidentiality in Dentistry
3 Chapter 3: Dental Terminology, Tooth Anatomy & Tooth Numbering Systems
3.1 Dental Directional Terminology, Surfaces & Anatomical Landmarks 3.2 Permanent and Deciduous Dentitions, Eruption & Life Cycle 3.3 Tooth Identification, Morphology & Numbering Systems (Universal, FDI, Palmer) 3.4 Periodontium & Tooth Supporting Structures
4 Chapter 4: Head and Neck Anatomy, Oral Cavity & Oral Pathology
4.1 Cranial Bones, Temporomandibular Joint (TMJ) & Muscles of Mastication 4.2 Trigeminal Nerve Innervation, Oral Cavity Vasculature & Salivary Glands 4.3 Oral Pathology: Caries, Periodontal Disease, Mucosal Lesions & Neoplasms
5 Chapter 5: Patient Assessment, Health History & Local Anesthesia
5.1 Patient Medical History, Systemic Disease Alerts & Vital Signs 5.2 Local Anesthetics: Amides, Esters & Vasoconstrictor Guidelines 5.3 Anesthetic Armamentarium, Injection Techniques & OSHA Needle Safety
6 Chapter 6: Medical Emergencies in the Dental Office
6.1 Emergency Armamentarium, Oxygen Delivery & Emergency Drug Kit 6.2 Syncope, Postural Hypotension, Hyperventilation & Nitrous Oxide Complications 6.3 Cardiovascular, Diabetic & Neurologic Emergencies: Angina, MI, Stroke, Hypoglycemia & Seizures 6.4 Allergic Reactions, Anaphylaxis, Asthma & Airway Obstruction
7 Chapter 7: Infection Control, Sterilization & Operatory Asepsis
7.1 Dental Microbiology, Modes of Transmission & Dental Unit Waterlines 7.2 Personal Protective Equipment (PPE) & OSHA Bloodborne Pathogens Standard 7.3 Instrument Sterilization Methods, Packaging & Biological Spore Monitoring 7.4 Surface Disinfection, Environmental Barriers & Regulated Biohazard Waste
8 Chapter 8: Restorative Dental Materials, Cements & Impression Media
8.1 Cavity Liners, Bases & Dental Cements (Glass Ionomer, ZOE, Zinc Phosphate) 8.2 Dental Amalgam & Composite Resins: Chemistry, Placement & Finishing 8.3 Impression Materials: Alginate, Elastomers (PVS, Polyethers) & Bite Registrations 8.4 Gypsum Products, Model Pouring, Trimming, Waxes & Laboratory Resins
9 Chapter 9: Dental Instruments, Handpieces & Equipment Maintenance
9.1 Dental Handpieces, Rotary Burs & Power Scalers 9.2 Handpiece Care, Maintenance, Purging & Sterilization Protocols 9.3 Procedural Tray Setups & Specialty Dental Armamentarium 9.4 Dental Unit Compressors, Central Suction & Vacuum Line Maintenance
10 Chapter 10: Four-Handed Chairside Dentistry & Moisture Control
10.1 Ergonomics, Operator Zones & Patient Positioning 10.2 Four-Handed Instrument Transfer Techniques & Instrument Grasps 10.3 Moisture Control: High-Volume Evacuation (HVE), Saliva Ejectors & Isolation 10.4 Dental Dam Application, Clamps & Armamentarium
11 Chapter 11: Clinical Dental Charting, Operatory Hazards & Preventative Procedures
11.1 Dental Charting, G.V. Black Cavity Classifications & Periodontal Records 11.2 Operatory Chemical Safety, OSHA HazCom & Safety Data Sheets (SDS) 11.3 Coronal Polishing: Principles, Selective Polishing & Clinical Technique 11.4 Dental Fluoride Therapy, Pit and Fissure Sealants & Patient Education
12 Chapter 12: Restorative, Specialty Dental Assisting & Laboratory Procedures
12.1 Chairside Restorative Assisting: Matrices, Wedges & Cavity Preparation 12.2 Endodontic, Periodontic & Oral Surgery Specialty Assisting 12.3 Fixed and Removable Prosthodontics & Orthodontic Assisting 12.4 Dental Laboratory Safety, Equipment, Custom Trays & Appliance Fabrication
13 Chapter 13: Radiation Physics, Radiographic Anatomy & Imaging Principles
13.1 Radiation Physics, X-Ray Generation & Beam Characteristics 13.2 Radiographic Anatomy: Normal Radiolucent and Radiopaque Landmarks 13.3 Analog Radiography: Film Packets, Emulsion & Chemical Processing 13.4 Digital Radiography: CCD, CMOS & Photostimulable Phosphor (PSP) Systems
14 Chapter 14: Intraoral & Extraoral Radiographic Techniques & Image Evaluation
14.1 Paralleling and Bisecting-Angle Techniques & Beam Alignment Devices 14.2 Periapical, Bitewing & Occlusal Projections 14.3 Panoramic Radiography, Cephalometrics & Cone Beam CT (CBCT) 14.4 Radiographic Artifacts, Exposure Errors & Technique Error Remediation
15 Chapter 15: Radiation Safety, Regulatory Compliance & Radiographic Infection Control
15.1 The ALARA Concept, Patient Shielding & Collimation Standards 15.2 Operator Protection, Dosimetry & Maximum Permissible Dose (MPD) 15.3 Environmental Compliance: Lead Foil Recycling, Fixer Silver Recovery & Waste Management 15.4 Infection Control in Dental Radiography & Digital Sensor Asepsis
8.3 Impression Materials: Alginate, Elastomers (PVS, Polyethers) & Bite Registrations
Key Takeaways Explain This Topic AI
Impression materials are classified into inelastic (rigid: impression plaster, compound, ZOE paste) and elastic (hydrocolloids and synthetic elastomers); inelastic materials cannot be withdrawn over undercuts and are used mainly for edentulous arches.
Irreversible hydrocolloid (alginate) sets via a chemical cross-linking reaction between soluble potassium alginate and calcium sulfate dihydrate, regulated by a trisodium phosphate retarder; warm water accelerates setting while cold water retards it.
Alginate impressions are subject to syneresis (fluid exudation causing shrinkage) and imbibition (water absorption causing swelling), requiring gypsum pouring within 10 to 15 minutes of removal for optimal dimensional accuracy.
Polyvinyl siloxane (PVS / addition silicone) undergoes an addition reaction with zero volatile byproducts, yielding outstanding dimensional stability for 7 to 14 days; however, its platinum catalyst is permanently poisoned by sulfur compounds found in natural latex gloves.
Bite registrations record the patient's exact three-dimensional centric occlusal relationship; fast-setting PVS pastes provide zero resistance to closure and set to a rigid, non-distorting Shore A hardness.
Last updated: October 2026
8.3 Impression Materials: Alginate, Elastomers (PVS, Polyethers) & Bite Registrations
In restorative dentistry, fixed and removable prosthodontics, and orthodontics, indirect dental appliances and restorations must be fabricated extraorally on accurate gypsum replicas of the patient's dentition. Generating an exact master cast requires taking an impression —a precise negative reproduction of oral hard and soft tissues. Once poured with gypsum, this negative mold yields a positive working cast. The dental assistant plays a central role in selecting impression media, loading and seating impression trays, managing water-to-powder ratios, and disinfecting impressions prior to laboratory transfer.
Classification of Impression Materials
Impression materials are broadly classified based on their physical behavior upon setting into inelastic (rigid) and elastic (flexible) materials:
Inelastic (Rigid) Impression Materials
Inelastic impression materials set to a hard, rigid state that cannot flex or bend. If inserted into an area possessing anatomical undercuts (such as interdental spaces around natural teeth), they become mechanically locked in place or fracture upon removal. Consequently, inelastic materials are used mainly for edentulous arches (and occasionally as bite-registration media), not for impressions of natural teeth with undercuts:
Impression Plaster (Type I Gypsum): Rarely used today; sets rigid with minimal expansion.
Impression Compound: Thermoplastic material supplied as cakes or sticks. Softened in a hot water bath (120°F to 130°F / 49°C to 55°C) and cooled to intraoral temperature. Primarily used for border molding edentulous custom trays to register peripheral vestibule contours.
Zinc Oxide-Eugenol (ZOE) Impression Paste: Two-paste system that provides exceptional mucostatic (non-pressure) detail of edentulous ridge mucosa in custom trays for full dentures.
Elastic (Flexible) Impression Materials
Elastic materials set to a resilient, rubbery state that deforms elastically as it is withdrawn over undercuts, instantly rebounding to its original dimension without permanent distortion. Elastic materials include hydrocolloids and synthetic elastomers .
Irreversible Hydrocolloid (Alginate): Chemistry & Mechanics
A colloid is a suspension of microscopic particles of one substance dispersed throughout another. In a hydrocolloid , water serves as the dispersing medium. Alginate is termed irreversible because its liquid sol transforms into a solid gel via an irreversible chemical reaction; once set, it cannot be returned to the sol state by heating.
Chemical Composition of Alginate Powder
Potassium Alginate (or Sodium Alginate, ~12% to 15%): Soluble alginate salt extracted from marine brown kelp, serving as the primary reactive polymer.
Calcium Sulfate Dihydrate (~16%): The chemical reactor that donates calcium ions to replace monovalent potassium ions, cross-linking linear alginate chains into an insoluble elastic gel network of calcium alginate .
Trisodium Phosphate (~1% to 2%): The chemical retarder. Calcium sulfate reacts preferentially with trisodium phosphate before it can react with potassium alginate. This delay establishes a predictable working time (approximately 1.5 to 2 minutes) during which the material can be mixed and seated before gelation begins.
Diatomaceous Earth (~60%): Inert silica filler that imparts body, bulk, handling stiffness, and prevents the mix from being excessively sticky.
Potassium Titanium Fluoride: Surface hardener that prevents alginate from inhibiting the setting reaction of poured gypsum, ensuring dense, smooth model surfaces.
Water-to-Powder Ratios & Dispensing Protocols
Adult Maxillary Arch: Standardly 3 level scoops of powder to 3 measures of water .
Adult Mandibular Arch: Standardly 2 level scoops of powder to 2 measures of water .
Fluffing the Powder: Over storage and shipping, alginate powder settles and becomes compacted. The cannister must be gently inverted and fluffed several times before opening. The measuring scoop is dipped into the powder without packing, overfilled, and leveled flat with the straight edge of a cement spatula.
Mixing Protocol: Always measure room-temperature water into a clean, flexible rubber bowl FIRST , then sift the powder into the water. Adding water to powder traps dry pockets of powder and air. The assistant spatulates with a wide-blade alginate spatula against the curved bowl walls in a rapid figure-eight motion, smearing the paste to express trapped air. Mixing must produce a creamy, smooth, bubble-free consistency within 30 to 45 seconds .
Water Temperature Effects on Reaction Kinetics
The setting time of alginate is governed by the water temperature:
Normal Water Temperature: Standard room temperature water at 68°F to 72°F (20°C to 22°C) provides normal working time (approximately 2 minutes) and setting time (approximately 2 to 4 minutes).
Warm Water (>72°F / 22°C): Dramatically accelerates the chemical setting reaction, shortening working and setting times. Useful for patients with severe gag reflexes or pediatric patients, but increases the risk of premature setting during tray seating.
Cold Water (<68°F / 20°C): Dramatically retards (prolongs) the setting reaction, granting extended working time. Useful in hot clinical environments or when novice operators require additional time to seat complex arches.
Syneresis vs. Imbibition: Dimensional Stability Limits
Alginate gel contains approximately 80% to 85% water entrapped within its calcium alginate meshwork. Because the gel walls are permeable, alginate is highly sensitive to ambient humidity:
Syneresis: If an alginate impression is left exposed to ambient air, the gel matrix spontaneously contracts and squeezes out droplets of internal water onto the surface. This fluid evaporation causes severe dimensional shrinkage and distortion .
Imbibition: If an alginate impression is immersed directly in water or soaked in liquid disinfectant, the gel matrix absorbs the liquid and swells. This fluid uptake causes severe dimensional expansion and distortion .
Important
The 10-to-15 Minute Pour Imperative: To avoid the destructive effects of syneresis and imbibition, alginate impressions must be poured with gypsum within 10 to 15 minutes of removal from the mouth . If an immediate pour is impossible, the disinfected impression must be wrapped in a slightly damp paper towel (maintaining 100% relative humidity) and placed inside an airtight, sealed plastic bag, and poured within 30 to 45 minutes maximum.
- Tray Selection, Seating Protocols & Anatomical Landmarks
- Tray Types and Modifications
Perforated vs. Rim-Lock Trays: Perforated metal or plastic trays allow alginate to extrude through holes, creating mechanical retention that locks the set gel to the tray. Rim-lock trays possess a raised interior rim that mechanically traps the material.
Tray Sizing: The selected tray must extend 2 to 3 mm beyond the retromolar pads (mandibular) or maxillary tuberosities and hamular notches , and provide 2 to 3 mm of uniform space between the flanges and facial/lingual surfaces of the teeth.
Utility Wax Modification: Soft ropes of red utility (periphery) wax can be adapted along the tray flanges to extend border length into deep vestibules, prevent soft tissue bruising from tray edges, and build up high palatal vaults in the maxillary tray.
- Mandibular vs. Maxillary Seating Sequence ┌────────────────────────────────────────────────────────┐
- │ ALGINATE TRAY SEATING & REMOVAL SEQUENCES │
- ├───────────────────────────┬────────────────────────────┤
- │ Mandibular Arch │ • Operator at 8-9 o'clock │
- │ │ • Seat posterior to anterior│
- │ │ • Patient raises tongue │
- ├───────────────────────────┼────────────────────────────┤
- │ Maxillary Arch │ • Operator at 11-12 o'clock│
- │ │ • Seat posterior to anterior│
- │ │ • Directs excess forward │
- ├───────────────────────────┼────────────────────────────┤
- │ Removal Maneuver │ • Break peripheral seal │
- │ │ • Quick snap along teeth │
- └───────────────────────────┴────────────────────────────┘
Mandibular Seating Sequence:
The operator/assistant stands at the 8:00 to 9:00 o'clock position in front of the patient.
Wipe a small amount of alginate from the bowl with a gloved finger and rub it into deep occlusal grooves and interdental spaces to prevent air bubbles.
Retract the patient's right cheek with the side of the tray, rotate the tray into the mouth, and center it over the mandibular arch.
Instruct the patient to raise their tongue to the roof of the mouth ; this pulls the floor of the mouth up, preventing the lingual flanges from trapping the tongue and ensuring full registration of the lingual sulcus and retromolar pads.
Seat the tray firmly from posterior to anterior to express excess material forward.
Perform muscle trimming by gently pulling the lips and cheeks outward, upward, and inward.
Maxillary Seating Sequence:
The operator/assistant stands at the 11:00 to 12:00 o'clock position behind the patient.
Retract the right cheek, rotate the loaded tray into the oral cavity, and position the tray handle centered with the patient's facial midline.
Seat the tray posterior to anterior , placing the posterior border firmly against the hard palate/tuberosities first before rolling the anterior portion upward. This forces excess material forward toward the lips and prevents material from escaping backward into the oropharynx, preventing gagging.
Perform muscle trimming by pulling cheeks and lip outward, downward, and inward.
The Quick-Snap Removal Technique: After alginate has fully set (tested by probing excess material in the bowl or vestibule for resiliency and lack of stickiness; wait an additional 1 to 2 minutes after initial set for tear strength to develop), break the peripheral air seal by lifting the cheek. Remove the tray with a single, swift, quick snap along the long axis of the teeth. Never rock, wiggle, or slowly pry the tray; slow deformation causes permanent plastic strain and irreversible dimensional distortion.
Reversible Hydrocolloid (Agar)
Reversible hydrocolloid consists predominantly of agar-agar extracted from red seaweed. Unlike alginate, agar undergoes a purely physical phase change governed by temperature: it melts into a liquid sol upon heating and solidifies into an elastic gel upon cooling.
Armamentarium: Requires specialized water-cooled impression trays connected to circulating water hoses, and a three-compartment hydrocolloid conditioning bath :
Liquefying Unit (212°F / 100°C for 10 min): Melts solid agar gel into fluid sol.
Storage Unit (150°F / 65°C): Maintains agar in fluid sol state ready for tray loading.
Tempering Unit (110°F / 43°C for 5-10 min): Cools the filled tray material to a temperature tolerable to oral mucosa.
While exceptionally accurate, the cumbersome hardware and sensitive technique have led to agar being almost entirely replaced by modern synthetic elastomers.
Elastomeric Impression Materials: Chemistry & Clinical Use
Elastomers are synthetic rubber polymers used whenever maximum dimensional accuracy, fine detail reproduction, and stability over time are required, such as master impressions for crowns, fixed partial dentures (bridges), inlays, onlays, and dental implants.
Elastomer Class Polymerization Chemistry Dimensional Stability & Pour Window Clinical Pros & Cons
Polysulfide (Rubber Base) Mercaptan-terminated polymer cross-linked by lead dioxide Moderate stability; releases water byproduct; pour within 1 hour High tear strength; strong sulfur odor; stains clothing permanently; long set time (8-14 min)
Polyether (Impregum) Ring-opening polymerization of aziridine rings High stability; no byproduct; pour within 7-14 days if kept dry Intrinsically hydrophilic; captures detail in moisture; very rigid (hard to remove over undercuts)
Condensation Silicone Hydroxyl-terminated polydimethylsiloxane + alkyl silicate Low-to-moderate; releases volatile ethyl alcohol byproduct; pour immediately Easy mixing; pleasant odor; high setting shrinkage over 1-2 hours due to alcohol evaporation
Addition Silicone (PVS / VPS) Vinyl siloxane addition to silane catalyzed by chloroplatinic acid Maximum stability; no volatile byproducts; stable for 7-14 days; multiple pours Exceptional detail; lowest shrinkage; hydrophobic; poisoned by sulfur in latex gloves
1. Polysulfide (Rubber Base)
Polysulfide was the earliest synthetic elastomer. Supplied as a two-paste system (white base paste containing polysulfide polymer with mercaptan [-SH] groups + brown catalyst paste containing lead dioxide). The setting condensation reaction links mercaptan groups, producing water as a volatile byproduct . As this water evaporates, the impression undergoes progressive dimensional shrinkage; it must be poured with gypsum within one hour .
2. Polyether
Polyether (e.g., Impregum) polymerizes via ring-opening addition of aziridine rings, producing no volatile byproduct . Polyether is intrinsically hydrophilic , meaning it has a low contact angle that allows it to wet tooth preparations and capture sharp marginal detail even in the presence of slight sulcular moisture. However, set polyether is extremely rigid and stiff ; removing it from deep undercuts requires high force, risking stone tooth fracture during model separation. Furthermore, polyether absorbs water; it must never be stored in high-humidity bags or wet disinfectant solutions , but stored completely dry.
3. Addition Silicone / Polyvinyl Siloxane (PVS / VPS)
Polyvinyl siloxane (PVS) is the most widely utilized and dimensionally accurate impression material in modern restorative dentistry:
Addition Chemistry: Terminal vinyl groups cross-link with silane groups in the presence of a chloroplatinic acid (platinum) catalyst . Because it is a true addition reaction, no volatile byproducts are generated , yielding virtually undetectable setting shrinkage (<0.05%). PVS impressions can be stored for 7 to 14 days and poured multiple times with identical accuracy.
Hydrophobic Nature & Surfactants: Pure PVS is hydrophobic (repelled by water and saliva). Modern formulations incorporate non-ionic surfactants to enhance wetting against moist dentin and gypsum slurries.
Delivery Systems: Available in light-body (wash), medium-body, heavy-body (tray), and putty viscosities. Standardly delivered using automix cartridge guns with helical spiral static mixing tips, ensuring exact proportions and bubble-free delivery.
Warning
Latex Poisoning of PVS Platinum Catalysts: The platinum addition catalyst in polyvinyl siloxane is extraordinarily sensitive to sulfur and sulfur compounds . Sulfur contaminants completely poison the platinum catalyst, arresting polymerization. Residual sulfur found in natural rubber latex examination gloves , dental dams, or sulfur-containing hemostatic retraction agents (ferric sulfate) will prevent PVS from curing, leaving a sticky, uncured layer of fluid paste against the tooth preparation. Dental assistants and clinicians must wear nitrile, vinyl, or synthetic gloves when handling PVS putty, loading trays, or manipulating preparations.
Bite Registrations: Materials & Centric Occlusion
A bite registration (occlusal registration) is an accurate record of the three-dimensional relationship between the maxillary and mandibular teeth when the jaws are in centric occlusion (maximum intercuspation) . It enables the dental laboratory technician to mount maxillary and mandibular gypsum working casts onto a mechanical articulator with identical spatial orientation.
Bite Registration Materials
Bite Registration Wax (Baseplate Wax Wafers): Softened in warm water, positioned over the occlusal surfaces, and the patient bites into centric occlusion. Wax is susceptible to thermal distortion during transport and can warp if handled improperly.
Elastomeric Bite Registration Paste (PVS / Blu-Mousse, Regisil): The standard of care. Fast-setting polyvinyl siloxane delivered via an automix gun directly over the occlusal surfaces of posterior teeth:
Zero Resistance to Closure: PVS paste has a light, mousse-like initial viscosity that offers zero mechanical resistance as the patient closes, preventing the patient from shifting their jaw into an unnatural or eccentric bite.
Rapid Setting: Fully sets intraorally within 30 to 60 seconds .
High Rigidity (Shore A Hardness > 85-90): Sets to a rock-hard consistency that will not flex, warp, or compress under the weight of stone models on an articulator. It is easily trimmed with a sharp scalpel or laboratory acrylic bur to expose only cusp tip indentations.