Study guide
9.1 Department Delivery
AMT Registered Phlebotomy Technician RPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day
2 Patient Identification & Test Prep
2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests
3 Collection Containers & Equipment
3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment
4 Venipuncture Sites & Technique
4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture
5 Order of Draw & Capillary Collection
5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures
6 Heel Stick, Post-Care & Specimen Integrity
6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity
7 Age Factors, Labeling & Arterial vs Venous
7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood
8 Specimen Processing & Special Collections
8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection
9 Delivery, Shipping & Patient Instructions
9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood
10 POCT & Quality Assurance
10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards
11 Time Management & Assignment Organization
11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate
12 Professional Communications
12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements
13 Clerical Skills & Duties
13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy
14 Safety Standards & Precautions
14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation
15 Complications & Facility Safety
15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety
16 Legal, Ethical & Professional Practice
16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent
17 Terminology, Anatomy & Physiology
17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy
9.1 Department Delivery
Key Takeaways Explain This Topic AI
Route specimens by order and tube type—chemistry (serum/plasma), hematology (EDTA), coagulation (citrate), microbiology (cultures and non-blood), and blood bank (strict labeling)—not by convenience
Light-blue citrate tubes go to coagulation; lavender EDTA to hematology; SST/gold/red/green typically to chemistry; blood culture bottles and non-blood cultures to microbiology
Blood bank specimens require two unique identifiers, collector signature, date/time, and often a second person verification—never relabel or combine tubes for transfusion workups
STAT, timed, and irreplaceable specimens (CSF, blood cultures, ABGs) bypass routine batching and follow hand-delivery or priority routing per facility policy
Central receiving may sort multi-department draws, but packaging must still prevent leaks, protect temperature, and keep paperwork dry and readable
Last updated: July 2026
Domain II-D— select proper department for specimen delivery —tests whether you can move a labeled specimen from the bedside to the bench that actually performs the ordered test. Hospitals may use central accessioning, pneumatic tube stations, or direct walk-in delivery, but the routing logic is the same: tube additive, specimen type, and order determine destination. Sending a coagulation tube to hematology because "it is purple-ish" or routing a type-and-screen to chemistry because "it is blood" creates delays, redraws, and patient-safety risk.
Why Department Routing Is a Safety Competency
Laboratory sections use different instruments, reagents, and quality-control rules. A CBC analyzer cannot run a PT/INR on citrate plasma without a different workflow. Microbiology incubates living organisms; chemistry measures analytes in serum or plasma. Blood bank work can affect transfusion decisions—misidentified tubes there are never "close enough." Your delivery decision is the last preanalytical gate before the specimen enters a method that assumes you sent the right material to the right place.
Think in three steps every time:
Read the order (electronic or paper requisition).
Match the container you actually collected.
Deliver to the section (or central receiving) that processes that combination.
If step 2 and step 1 disagree—wrong tube drawn, missing culture bottle—stop and escalate before delivery.
Chemistry Department
Chemistry performs quantitative and qualitative assays on serum, plasma, or whole blood depending on the test. Typical collection tubes include:
Tube / specimen Common chemistry uses Delivery notes
Gold/SST (serum separator) CMP, BMP, lipids, liver panel, many enzymes Allow clot if required; centrifuge per policy before or after delivery to central lab
Red-top (no additive) Serum tests when SST unavailable Clot, centrifuge, separate serum if policy requires
Green-top (lithium or sodium heparin) Plasma chemistry, some STAT panels, blood gases in some systems Do not confuse with light-blue citrate—green is heparin, not coagulation PT
Gray-top (fluoride/oxalate or fluoride only) Glucose, lactate (with ice) Lactate and some glucose protocols need immediate ice and STAT routing
Urine (random, timed, 24-hr) Urinalysis, urine chemistry, microalbumin Separate from blood tubes; follow preservative and refrigeration rules
Chemistry is often the highest-volume destination. Many facilities route all "routine blood tubes" to central specimen processing , which centrifuges and aliquots. Even then, you must not dump incompatible specimens in one leaking bag—separate iced ammonia from room-temperature CBC tubes, and never place blood bank tubes in a routine chemistry carrier without blood-bank policy approval.
High-yield chemistry delivery traps:
Sending a light-blue citrate tube to chemistry for PT/INR (belongs in coagulation).
Delivering unspun SST for a test that requires serum when the lab expects spun tubes at receipt.
Mixing iced specimens with ambient tubes so ice melts and warms critical analytes.
Hematology Department
Hematology focuses on cellular components of blood—primarily EDTA (lavender-top) whole blood.
Test category Typical tube Delivery notes
CBC with differential Lavender EDTA Mix gently by inversion 8–10 times at collection; deliver within stability window
ESR, reticulocyte count Lavender EDTA Avoid extreme shaking that can alter platelets or red-cell indices
Hemoglobin A1c Lavender EDTA (facility-dependent; some use lavender or dedicated tube) Follow local directory—do not assume gold-top
Peripheral blood smear review Lavender EDTA Some labs want slides made at bedside; deliver promptly
Hematology specimens are sensitive to clotting (if EDTA inadequate or tube underfilled), agitation , and delay . A lavender tube left in a hot car or vigorously shaken in a packed carrier can produce falsely abnormal platelet counts. Keep tubes upright when possible and deliver within the laboratory's stated stability limit—often a few hours at room temperature for CBC, shorter for some specialty hematology assays.
Do not send lavender tubes to coagulation for "any blood test" or to chemistry unless the order explicitly lists a chemistry method on EDTA whole blood.
Coagulation Department
Coagulation uses sodium citrate (light-blue-top) tubes filled to the exact fill line so the 9:1 blood-to-anticoagulant ratio is correct.
- Test Tube Critical delivery points
- PT/INR, aPTT Light-blue citrate Underfilled = rejected; deliver promptly—some assays unstable if delayed
Fibrinogen, D-dimer, factor assays Light-blue citrate May require centrifugation at specific g-force; follow STAT rules
Platelet function, TEG/ROTEM (facility-specific) Specialized tubes Often excluded from pneumatic tube transport —hand carry
Coagulation is unforgiving about volume and time . A tube drawn to half the line will be rejected before it reaches the analyzer. If you must batch deliveries, coagulation STATs and timed draws still outrank routine chemistry drops.
Exam contrast: Green heparin ≠ light-blue citrate. Heparin inhibits clotting by a different mechanism and is used for plasma chemistry, not standard PT/INR on citrate instruments.
Microbiology Department
Microbiology receives specimens that must stay viable for culture or that require direct microscopic examination— blood culture bottles , urine for culture , sputum , stool , wound swabs , throat swabs , and other site-specific cultures.
Specimen type Typical container Delivery priority
Blood cultures Aerobic/anaerobic bottles STAT —incubate ASAP; do not refrigerate routine bottles unless manufacturer says so
Urine culture Sterile cup or preservative per order Deliver within 1–2 hours when possible; refrigerate if delay
Sputum, wound, throat swabs Sterile cup or transport medium Keep transport media moist; avoid temperature extremes
Stool culture / O&P Clean container or preservative vial O&P needs preservative promptly; some enteric cultures must not be refrigerated
Microbiology is not the default for "any tube with red liquid." A gold-top serum tube for hepatitis serology may go to serology/immunology or chemistry depending on the lab layout—read the order. True culture specimens almost always route to microbiology or a dedicated bench listed on the requisition.
Never delay blood cultures while you finish paperwork for routine chemistries. Two sets from different sites mean nothing if bottles sit at room temperature in a drawer for hours against policy.
Blood Bank / Transfusion Services
Blood bank specimens support typing, antibody screening, crossmatching, and transfusion reaction workups. Requirements are stricter than routine chemistry:
Two unique patient identifiers on the tube and requisition, matching exactly.
Collector signature and date/time of collection—often bedside labeling mandatory.
Second-person verification at many facilities for transfusion-related collections.
Dedicated pink-top or facility-specified EDTA tubes for some type-and-screen protocols.
Hand delivery or designated blood-bank carriers—many policies prohibit mixing these tubes in generic pneumatic sends.
Blood bank will reject mislabeled, incomplete, or questionable tubes rather than risk a transfusion error. If you discover a labeling error after leaving the room, do not cross out and rewrite—follow rejection and recollection policy.
Transfusion reaction specimens (post-transfusion blood samples, urine, or other materials per protocol) also route to blood bank or transfusion services with urgent documentation—not to routine chemistry drop boxes.
Central Receiving vs Direct Section Delivery
Many hospitals use central specimen receiving to accession, centrifuge, and sort. In that model you deliver to one location with barcode scanning; the lab routes internally. You still must:
Separate temperature classes (frozen, refrigerated, ambient, 37°C warm pack, ice slurry).
Bag biohazard specimens with paperwork in the outer pocket.
Flag STAT , timed , and add-on specimens per policy.
Never hide a blood bank tube inside a routine chemistry bag without explicit process approval.
Smaller clinics and reference-lab draw sites may courier everything to one external lab address—packaging and temperature then matter more than internal hallway routing (covered in Section 9.2).
Multi-Tube Draws: Practical Routing Example
Order: blood cultures, PT/INR, CBC, CMP.
- Tube Department
- Culture bottles Microbiology (first priority delivery)
- Light-blue citrate Coagulation
- Lavender EDTA Hematology
- SST/gold Chemistry (or central processing for spin)
Deliver cultures immediately. Batch remaining tubes by policy, but do not let coagulation or cultures wait behind a routine chemistry run.
Common Delivery Failures
- Error Consequence Prevention
- Wrong department Delayed or wrong test Match order + tube additive
- Underfilled citrate Rejected coagulation Fill to line; second tube if needed
- Blood bank mislabel Transfusion risk Bedside two-ID label + verification
- Cultures delayed False negatives STAT hand delivery
- Leaking bag Exposure, lost paperwork Cap check, absorbent, outer pocket
- Exam Scenarios to Rehearse
Nurse asks you to drop a lavender and light-blue in the chemistry window "because the lab is closer." Refuse—route by test, not geography.
You find an unlabeled pink tube in your carrier. Do not deliver to blood bank; quarantine and investigate.
STAT ammonia on ice arrives with routine tubes in the same unrefrigerated bag. Separate and hand-deliver the iced specimen.
Domain II-D rewards collectors who treat delivery as part of the test method. The right stick in the wrong department is still the wrong result.