Study guide
9.2 Process Specimens for Shipping
AMT Registered Phlebotomy Technician RPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day
2 Patient Identification & Test Prep
2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests
3 Collection Containers & Equipment
3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment
4 Venipuncture Sites & Technique
4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture
5 Order of Draw & Capillary Collection
5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures
6 Heel Stick, Post-Care & Specimen Integrity
6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity
7 Age Factors, Labeling & Arterial vs Venous
7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood
8 Specimen Processing & Special Collections
8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection
9 Delivery, Shipping & Patient Instructions
9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood
10 POCT & Quality Assurance
10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards
11 Time Management & Assignment Organization
11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate
12 Professional Communications
12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements
13 Clerical Skills & Duties
13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy
14 Safety Standards & Precautions
14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation
15 Complications & Facility Safety
15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety
16 Legal, Ethical & Professional Practice
16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent
17 Terminology, Anatomy & Physiology
17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy
9.2 Process Specimens for Shipping
Key Takeaways Explain This Topic AI
Package specimens in leakproof primary containers inside sealed biohazard bags with absorbent material and paperwork in the outer pocket
Category B biological substances (UN 3373) for routine diagnostic specimens require triple packaging: primary, absorbent secondary, rigid outer box with biohazard labeling
Courier transport allows temperature control, tracking, and faster delivery; postal/mail services follow strict packaging rules and may reject noncompliant shipments
Never ship open tubes, needles on syringes, leaking containers, or dry ice in a sealed airtight compartment without trained hazardous-materials procedures
Document shipper identity, destination, contents, and chain of custody when specimens leave the facility for reference laboratories or legal testing
Last updated: July 2026
Domain II-E— process specimens for shipping —extends delivery beyond your own hallways. Reference laboratories, public health departments, forensic toxicology vendors, and sister hospitals receive thousands of diagnostic packages daily. A cracked tube in a thin envelope can expose a mail handler to hepatitis B; an unrefrigerated ammonia specimen can report a falsely high value that changes ICU management. The RPT exam expects you to know how to package , when biohazard rules apply , and how courier transport differs from postal mail —not to memorize every IATA paragraph, but to apply the core triple-packaging and temperature principles.
Shipping vs Local Delivery
Local delivery (walking to central lab, pneumatic tubes, internal couriers) still requires biohazard bags and temperature control. Shipping adds:
Regulatory classification (most patient diagnostic specimens = Category B, UN 3373).
Outer packaging strong enough to survive drops and compression.
Documentation (manifest, requisition, sometimes chain-of-custody forms).
Carrier-specific rules (courier contracts vs USPS/UPS/FedEx biological substance policies).
Training for staff who offer hazardous materials for transport.
If a specimen leaves your building, assume an inspector or carrier employee could open the package—package as if they will.
Biohazard Packaging Fundamentals
Whether the box travels across town or across the state, start with the same bedside habits:
Primary container — screw-cap tube, cup, or bottle sealed tight; no needles attached.
Secondary containment — sealable biohazard bag or canister; if multiple primaries, each should be leakproof.
Absorbent material — enough to absorb the entire liquid volume if all primary containers broke (paper towels, cellulose pads, vermiculite per kit).
Outer rigid package — corrugated fiberboard box or approved cooler shell; no padded envelopes alone for liquid blood tubes.
Labeling — biohazard symbol, "Biological Substance, Category B" (UN 3373) when required, sender and recipient addresses, orientation arrows if needed.
Paperwork — for shipped Category B packages, place the itemized list of contents between the secondary packaging and the rigid outer box (49 CFR 173.199 / IATA PI650); for local hand transport, keep the requisition in the biohazard bag's outer pocket so a leak cannot destroy patient identity.
- Layer Purpose Common failure
- Primary Holds specimen Loose cap, cracked tube
- Absorbent secondary Contains leaks Too little padding
- Outer box Impact protection Thin mailer, overpacked crush
Never ship:
Leaking or visibly contaminated outer packaging.
Syringes with needles attached.
Uncapped tubes.
Specimens with mismatched or missing identifiers (resolve before shipment).
Category B (UN 3373) Triple Packaging
Routine diagnostic blood, urine, stool, and swabs in transport media are typically Category B infectious substances —not known or suspected to contain Category A pathogens (e.g., Ebola culture stocks). Category B shipments use triple packaging :
Primary receptacle — leakproof tube or cup (often in a zip bag).
Secondary packaging — leakproof container with absorbent between primary and secondary walls; all primaries must fit with absorbent surrounding them.
Outer packaging — rigid box meeting drop-test standards; marked with UN 3373 diamond label and proper shipping name.
Staff who classify, package, and offer these shipments usually need documented hazmat training — DOT/HMR recurrent training at least every three years (49 CFR 172.704), and every 24 months for staff preparing air shipments under ICAO/IATA. Untrained shipping is both an exam topic and an OSHA/DOT compliance issue.
Category A (UN 2814/2900) applies to cultures of highly infectious agents and requires far stricter packaging—rare in outpatient phlebotomy. If you do not know the classification, ask the laboratory shipping desk—do not guess.
Temperature Control During Shipment
Shipping extends preanalytical time. Match the cooler to the specimen class:
Temperature class Examples Shipping practice
Ambient / room temp Many chemistry tubes, blood cultures (per lab) Avoid hot trunks; summer courier vans need insulated boxes
Refrigerated (2–8°C) Some urine chemistries, certain hormones Validated cold packs; monitor season extremes
Frozen Some molecular tests, aliquots Dry ice or frozen packs; dry ice is a dangerous good —ventilation and labeling required
Ice slurry / wet ice Ammonia, lactate (if not separated before ship) Ship STAT by courier; do not let ice water contact open specimens
Warm (~37°C) Cryoglobulin workflows before separation Specialized warm packs; never mail warm specimens without lab approval
Separate refrigerated , frozen , and ambient specimens into different shippers when the reference lab instructs you to—mixing frozen gel packs with cultures that must stay at room temperature can destroy both.
Courier vs Mail
Courier services (medical courier, dedicated lab route, expedited overnight) are preferred when:
Specimens are time-critical (STAT chemistry, microbiology cultures, fragile stability windows).
Temperature chain must be monitored or same-day delivery is required.
Chain of custody or legal specimens need signed handoffs at pickup and delivery.
Volume justifies scheduled pickups with trained drivers.
Couriers often provide coolers , manifest logs , and barcode tracking . Confirm pickup cutoffs—missing the 3 p.m. run may mean overnight delay incompatible with stability.
Postal and commercial mail (USPS, UPS, FedEx with biological substance approval) may be used for properly packaged Category B specimens when:
The carrier accepts UN 3373 from your account type.
Packaging meets IATA Packing Instruction 650 (for air) or equivalent ground rules.
No Category A or prohibited items are included.
Dry ice quantities and markings comply if used.
Mail is generally slower and less flexible for temperature excursions. Many reference labs publish "do not use regular mail for STAT" policies. Exam questions often contrast: courier for STAT refrigerated plasma vs prohibited padded envelope with loose tubes .
- Factor Medical courier Postal / parcel mail
- Speed Same-day or scheduled STAT Often 1–3+ days unless premium
- Temperature Coolers, chain documentation Depends on packaging; more risk
- Tracking Usually detailed Varies by service
- Legal/chain of custody Signed transfers Harder to maintain continuous custody
- Training Driver may be hazmat certified Shipper must package correctly
- Special Shipping Situations
Fixed specimens (tissue in formalin) ship as chemical hazardous goods—separate from unfixed blood. Do not pour formalin into blood tubes.
Dry ice: Used to keep frozen specimens frozen. Requires ventilation (do not seal dry ice in an airtight jar), weight limits on air shipments, and UN 1845 Class 9 miscellaneous hazard labeling with the net weight of dry ice declared when thresholds are met. Only trained staff should prepare dry-ice shipments.
Chain of custody: Employment drug screens, forensic toxicology, and some legal alcohol specimens need tamper-evident seals , custody forms signed at each transfer, and direct courier handoff—never drop in an unattended mailbox.
International shipping: Additional customs forms, import permits, and stricter IATA rules. Outpatient phlebotomy sites usually route international work through a central laboratory—not improvising at the draw station.
Pneumatic Tubes vs Off-Site Shipping (Exam Crossover)
Hospital pneumatic tube systems are not "shipping," but II-E scenarios sometimes contrast them. Many policies prohibit PTS for CSF, stool, 24-hour urine jugs, iced specimens, arterial blood gases, open cups, and some blood-bank materials. Off-site shipping always needs rigid outer packaging—PTS uses carriers, not envelopes, but hemolysis risk still applies locally.
Pre-Shipment Checklist
Before sealing the outer box:
Two patient identifiers match requisition and tubes.
Caps tight; no needles.
Absorbent adequate for total liquid volume.
Biohazard bag sealed; paperwork outside primary compartment.
UN 3373 label and shipping name if required.
Temperature packs appropriate; specimens segregated.
Manifest / requisition enclosed in outer pouch.
Courier pickup scheduled or mail service approved for biological substances.
Chain-of-custody form signed if legal specimen.
Common Shipping Failures
- Failure Risk Fix
- Envelope with one tube Breakage, exposure Rigid triple packaging
- No absorbent Leak contaminates truck Pad all sides
- Warm frozen aliquot Invalid molecular test Validate cold chain
- Wrong UN label Carrier refusal, fine Use lab-approved kit
- Mailbox for custody specimen Broken chain Direct courier handoff
- Exam Focus
Expect packaging-layer questions, UN 3373 identification, when to choose courier over mail, and prohibited practices (needles, leaks, airtight dry-ice bombs). The correct answer almost always prioritizes leak containment, identification, and stability together—not the cheapest postage.
Domain II-E is where collection quality meets transportation engineering. A specimen that hemolyzed in a poorly packed box is still your preanalytical failure—even if the stick was perfect.