Study guide

6.3 Maintain Blood Specimen Integrity

AMT Registered Phlebotomy Technician RPT

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day

2 Patient Identification & Test Prep

2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests

3 Collection Containers & Equipment

3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment

4 Venipuncture Sites & Technique

4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture

5 Order of Draw & Capillary Collection

5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures

6 Heel Stick, Post-Care & Specimen Integrity

6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity

7 Age Factors, Labeling & Arterial vs Venous

7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood

8 Specimen Processing & Special Collections

8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection

9 Delivery, Shipping & Patient Instructions

9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood

10 POCT & Quality Assurance

10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards

11 Time Management & Assignment Organization

11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate

12 Professional Communications

12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements

13 Clerical Skills & Duties

13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy

14 Safety Standards & Precautions

14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation

15 Complications & Facility Safety

15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety

16 Legal, Ethical & Professional Practice

16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent

17 Terminology, Anatomy & Physiology

17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy

6.3 Maintain Blood Specimen Integrity

Key Takeaways Explain This Topic AI

Gently invert additive tubes the manufacturer-recommended number of times immediately after collection—never shake vigorously

Serum tubes require adequate clotting time (often 30–60 minutes upright) before centrifugation unless the test allows shorter gelling

Hemolysis from rough handling, small needles, prolonged tourniquet, or difficult draws falsely elevates potassium and lactate dehydrogenase and lowers some chemistry values

Protect light-sensitive specimens (bilirubin, vitamin A, some drugs) from direct light; refrigerate or freeze per test requirements

Transport specimens promptly; delays alter glucose, gases, potassium, and enzyme results—know STAT vs routine delivery times

Last updated: July 2026

Maintain Blood Specimen Integrity From Collection to Laboratory (Domain I-K)

Quick Answer: Invert additive tubes gently right after draw; allow serum to clot before centrifugation; prevent hemolysis ; protect light- and temperature-sensitive analytes; and transport promptly —delays change glucose, gases, potassium, and enzymes.

The puncture site and tubes are only the beginning. Domain I-K tests whether you can handle blood samples so laboratory results reflect the patient's true physiology—not artifacts from shaking, clotting errors, hemolysis, light exposure, wrong temperature, or transport delay. Rejected specimens force redraws, delay care, and harm vulnerable patients (especially infants).

Mixing Additive Tubes: Invert, Do Not Shake

Anticoagulant and additive tubes require immediate gentle mixing to distribute additive throughout the blood. Shaking violently lyses red cells and causes hemolysis .

  • Tube type Typical mixing If mixing delayed or omitted
  • EDTA (lavender/pink) 8–10 gentle inversions Microclots; invalid CBC/differential
  • Sodium citrate (light blue) 3–4 gentle inversions Clots; invalid PT/aPTT
  • Heparin (green) 5–10 gentle inversions Clots in plasma; chemistry errors
  • SST/serum separator 5–10 inversions if clot activator present Delayed clotting; fibrin in serum
  • Gray (fluoride/oxalate) 5–10 gentle inversions Glycolysis continues; false low glucose

Invert means end-over-end rotation with a smooth motion—rough enough to mix, gentle enough to preserve cell membranes. Follow the manufacturer's inversion count printed on tube packaging or facility chart; exam items often cite representative numbers.

Clotting Times for Serum Specimens

Across specimen types, the companion rule is the two-hour separation standard : serum or plasma should be separated from the cells within 2 hours of collection unless the tube is designed to prevent cell metabolism. Left in contact with cells, glucose falls roughly 5–7% per hour , potassium leaks upward, and LDH rises.

Serum is produced after blood clots and retracts, then separates from the clot (manually or by centrifugation). Drawing into a plain red-top or clot-activator/gel separator tube is not enough—you must allow adequate clotting time before centrifugation unless using rapid protocols approved for your analyzer.

Practice Typical guidance Consequence of rushing

Upright clotting at room temperature Often 30–60 minutes for plain/activator tubes Fibrin strands in serum; analyzer clogs

  • Gel separator tubes Manufacturer time (may be shorter with activator) Incomplete separation; poor gel barrier
  • Centrifuge too soon <15 minutes on many plain tubes Hemolyzed appearance; rejected chemistry
  • Chill before clot complete Refrigerating unclotted serum Can interfere with clot formation

If a specimen must be transported before clotting completes, follow laboratory policy—some accept tubes upright for clotting at the lab; others require on-site centrifugation for outreach draws. Never freeze unseparated whole blood expecting serum later unless the test specifically requires frozen plasma.

Hemolysis Prevention: Before, During, and After Draw

Hemolysis is rupture of red cells, releasing intracellular potassium, LDH, AST, and other analytes into serum/plasma. Laboratories reject hemolyzed specimens for many tests because results are uninterpretable.

  • Hemolysis cause Prevention
  • Vigorous shaking or mixing Gentle inversions only
  • Small-gauge needle, slow draw, vacuum too strong Use appropriate gauge; smooth draw technique
  • Tourniquet left on longer than 1 minute Release when blood flows; relocate if delayed
  • Difficult draw, vein collapse, probing One confident insertion; do not dig
  • Alcohol not dry on skin Allow complete drying before puncture
  • Forceful milking (capillary) Wipe first drop; gentle intermittent pressure
  • Traumatic venipuncture Anchor vein; choose appropriate site
  • Extreme temperatures Do not freeze/heat whole blood inadvertently

Hemolyzed specimens often appear pink to red in serum/plasma after centrifugation. Even slight hemolysis may falsely elevate potassium —a critical value risk.

Light Protection

Some analytes degrade when exposed to ultraviolet and fluorescent light :

  • Analyte / test Light sensitivity action
  • Bilirubin (neonatal jaundice panels) Shield from light; amber or foil wrap
  • Vitamin A, beta-carotene Protect from light during transport
  • Some drug levels (e.g., certain immunosuppressants) Follow lab-specific dark transport
  • Blood gases Minimal air bubbles and light exposure; immediate analysis ideal

If the laboratory provides amber tubes or foil pouches , use them. Do not leave light-sensitive tubes on a sunny windowsill or under bright procedure lights while completing paperwork.

Temperature Requirements

Temperature control slows or stops enzymatic and cellular changes:

  • Requirement Examples Error to avoid
  • Room temperature (15–25°C) Some coagulation specimens per lab Refrigerating citrate when not indicated
  • Refrigerated (2–8°C) Many chemistry tubes after clot/centrifuge Leaving chilled specimen at room temp hours
  • Frozen Some drug levels, aliquots Freezing whole EDTA blood for serum tests
  • Body temperature (~37°C) Cryoglobulin, cold agglutinin Letting the tube cool before serum separation

Blood gases Plastic syringe: room temperature, analyze within 30 min Icing a plastic ABG syringe (falsely raises pO₂)

Do not freeze Whole blood cellular morphology Destroyed RBC morphology on smear

Gray-top fluoride tubes inhibit glycolysis for glucose—but even they have limits; prompt delivery still matters. EDTA specimens for CBC are usually analyzed within hours; prolonged room-temperature storage alters MCV and morphology.

Transport Delays and Stability

Every minute between patient and analyzer is a chemical reaction waiting to happen:

  • Analyte Stability concern
  • Glucose Glycolysis lowers glucose in whole blood without fluoride
  • Potassium Leaks from cells with delay, hemolysis, or chilling whole blood incorrectly
  • Blood gases pO2, pCO2, pH change rapidly with air bubbles and delay
  • Enzymes (CK, LDH) Degrade with time and temperature
  • Ammonia Rises with delay; often requires chilled transport on ice slurry
  • Coagulation factors Temperature-sensitive; follow exact lab protocol
  • Priority Handling expectation
  • STAT Immediate delivery to lab or POC; shortest possible delay
  • Timed / TDM Draw at exact ordered time; deliver within lab window
  • Routine Still prompt—"routine" is not "overnight at nurse's station"
  • Outreach / courier Pack per IATA/clinical courier rules; temperature monitors

Document collection time on labels when required—especially for glucose tolerance, therapeutic drug monitoring, and cortisol rhythms. A perfectly drawn specimen that sat four hours in a warm phlebotomy cart fails as surely as a mislabeled tube.

Fill Volume and Physical Integrity

Integrity also means correct fill and uncompromised containers :

Citrate tubes must fill to the vacuum line for a 9:1 blood-to-anticoagulant ratio ; underfill prolongs clotting times falsely.

Microcontainers must meet minimum fill lines; underfilled EDTA causes morphologic changes.

Do not transfer blood between tubes or pour from one additive into another.

Inspect for cracks, expired tubes, and wrong additives before sticking.

Rejection Triggers You Can Prevent

  • Rejection reason Collector prevention
  • Hemolyzed Gentle technique, timely tourniquet release, no shaking
  • Clotted EDTA/heparin Immediate proper inversions
  • Short citrate draw Fill to line; butterfly discard rule
  • Fibrin in serum Adequate clotting time upright
  • Wrong temperature Chilled transport when ordered
  • Light-degraded bilirubin Amber/foil protection
  • Unlabeled/mislabeled Bedside labeling before leaving patient
  • End-to-End Integrity Checklist

Correct order of draw and tube types.

Mix each additive tube immediately with gentle inversions.

Allow serum clotting per policy before centrifugation.

Protect light-sensitive tubes.

Store/transport at required temperature.

Deliver within stability window; note collection time on label.

Do not leave specimens in hot vehicles, direct sun, or pneumatic tubes unless approved.

Specimen integrity is the laboratory's trust in your hands. AMT RPT items often describe a tube that was shaken, left in sunlight, or delayed two hours and ask which result will be falsely changed. Connect each handling step to the analyte it protects—that is Domain I-K mastery.