Study guide
2.1 Identify the Correct Patient
AMT Registered Phlebotomy Technician RPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day
2 Patient Identification & Test Prep
2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests
3 Collection Containers & Equipment
3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment
4 Venipuncture Sites & Technique
4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture
5 Order of Draw & Capillary Collection
5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures
6 Heel Stick, Post-Care & Specimen Integrity
6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity
7 Age Factors, Labeling & Arterial vs Venous
7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood
8 Specimen Processing & Special Collections
8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection
9 Delivery, Shipping & Patient Instructions
9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood
10 POCT & Quality Assurance
10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards
11 Time Management & Assignment Organization
11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate
12 Professional Communications
12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements
13 Clerical Skills & Duties
13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy
14 Safety Standards & Precautions
14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation
15 Complications & Facility Safety
15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety
16 Legal, Ethical & Professional Practice
16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent
17 Terminology, Anatomy & Physiology
17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy
2.1 Identify the Correct Patient
Key Takeaways Explain This Topic AI
CLSI GP33 and GP41 require at least two person-specific identifiers before every collection — never room number, bed location, or chart proximity alone.
Use active identification: ask the patient to state full name and date of birth, then match those answers to the ID band and the requisition.
An identification band must be on the patient's body; bands on bed rails, IV poles, or clipboards are not valid parallel checks.
Inpatient, outpatient, and emergency-department settings each create distinct wrong-patient traps — location familiarity and throughput pressure are common failure modes.
Any mismatch among patient statement, wristband, and order is a hard stop: resolve identity before the needle enters the skin.
Last updated: July 2026
Identifying the correct patient is the non-negotiable first step in every blood collection. AMT RPT Work Area I-A tests whether you can apply national patient-safety standards — especially CLSI GP33 (Accuracy in Patient and Specimen Identification) and CLSI GP41 (Collection of Diagnostic Venous Blood Specimens) — plus Joint Commission NPSG.01.01.01 . A specimen drawn from the wrong person can trigger wrong treatment, incompatible transfusion, or a sentinel event. On the exam, patient-ID scenarios appear throughout the largest blueprint block (Obtaining Blood Samples, 34%). Treat every stem as a safety decision before you think about tubes or technique.
The Two-Identifier Standard
Before venipuncture, capillary puncture, or heel stick, verify identity with at least two person-specific identifiers . Person-specific means the data uniquely describes that human being — not where they are sleeping tonight.
- Acceptable identifiers Never acceptable as identifiers
- Full legal name (stated, spelled when policy requires) Room number
- Date of birth Bed number or bed tag
- Medical record number (MRN) or assigned patient ID Physical location on the unit
- Telephone number (when facility policy approves) "The chart on the bed"
- Barcode/RFID encoding ≥2 identifiers on a band attached to the patient Familiarity ("I drew her yesterday")
Exam trap: If an answer pairs name with room number, it fails — room number identifies a place, not a person. Patients transfer; beds turn over; charts get left behind.
Active vs Passive Identification
Active identification means open-ended questions:
Introduce yourself and state you must confirm identity before collection.
Ask the patient to state full name (and spell it if required).
Ask the patient to state date of birth.
Compare answers to the wristband (inpatients) and the requisition/order .
Confirm all sources agree before proceeding.
Passive or leading identification is unsafe: "Are you John Smith?" or "Your birthday is 4/12/1990, right?" Anxious, confused, hard-of-hearing, or non-English-speaking patients often nod to please staff. The exam rewards the phlebotomist who elicits identifiers from the patient, not the one who supplies them.
ID Band vs Verbal: Both, Not Either-Or
For inpatients, the identification band is a parallel check , not a replacement for verbal confirmation.
The band must be attached to the patient's body (wrist or ankle per policy).
Read identifiers from the band on the patient — not from a band clipped to bedding, an IV pole, or a bedside tray.
Match band data to what the patient stated and to the order.
A band on the rail is a classic exam image: scanning it is wrong even if the printed name matches the requisition, because the safety system assumes bands migrate off patients. Likewise, a band can be on the wrong patient from admission — verbal confirmation catches band-placement errors.
Outpatients may lack a wristband. Use facility policy: typically government or facility photo ID plus requisition, still achieving two person-specific identifiers. The principle does not change — only the physical artifacts.
Requisition Matching: The Third Leg of the Stool
Identification is a three-way match:
Patient statement ↔ ID band (when present) ↔ Requisition/order
- Requisition element Why it matters
- Patient name and DOB/MRN Must match verified identity
- Tests ordered Confirms you are collecting what was authorized
- Collection time/fasting flags Wrong patient + right tube still harms care
- Location or account number Helpful logistics — not a substitute identifier
Hard stops before the draw:
Name or DOB on the order does not match band and patient statement.
Order appears to belong to a roommate or prior occupant.
Duplicate names in the unit — heighten use of DOB and MRN; read alerts on the label.
Patient denies the ordered tests — pause; verify identity and order status.
Never draw first and "fix the label at the desk." Wrong-patient blood cannot be uncoupled from harm after the fact.
- Setting-Specific Traps
- Inpatient Floors
Room-only routing: Phlebotomists who enter by room number without stopping to identify invite swap errors after bed changes.
Sleeping patients: Wake gently, identify actively when possible; if non-verbal, follow unconscious-patient policy (band + second verified source).
Isolation rooms: Gowning delays are not a reason to skip identification — do it before or immediately upon entry per policy.
Outpatient / Draw Stations
Queue pressure: Calling "Next!" without matching the person who stood up to the appointment record.
Similar names on the schedule: Two "Maria Garcia" appointments — confirm DOB aloud every time.
No wristband assumption: Photo ID and requisition must still yield two identifiers.
Emergency Department
Unidentified trauma: May require temporary identifiers assigned by registration — follow ED protocol; do not invent identifiers.
High turnover: Patients move from hallway to bay quickly; re-identify when location changes if policy requires.
Altered mental status: Band plus nurse verification or record match per policy; document non-verbal pathway.
- Special Populations
- Pediatric Patients
Children often cannot state DOB reliably. Typical pathway:
Band on the child (not on the crib rail).
Parent/guardian states child's name and DOB.
Match to band and order.
Limited blood volume makes wrong-patient pediatric draws especially dangerous — you may not get a safe repeat volume.
Unconscious, Sedated, or Non-Verbal Adults
Use attached band plus second verified source (authorized nurse confirmation, barcode scan tied to band, electronic record match per policy).
Do not rely on visitors or unattached charts alone.
Document the identification method when the patient could not participate verbally.
Patients With Cognitive Impairment or Language Barriers
Use qualified interpreters — not family guessing — when policy requires.
Simplify language but keep open-ended identification when the patient can respond.
Never skip two identifiers because communication is difficult; escalate for help.
Discrepancy Response
- Situation Action
- Band missing or illegible Stop; obtain new band; re-identify
- Patient DOB differs from band/order Stop; involve nursing/registration
- Order for wrong MRN Stop; do not draw
Patient refuses after identity confirmed Separate issue (consent/refusal) — identity still must be correct first
Report near-misses per facility policy. Patient identification is the first link in the chain that continues with correct tubes, order of draw, and bedside labeling in the patient's presence — but I-A ends at the moment you are certain you have the right human being in front of you.
- AMT RPT Exam Traps (I-A)
- Room number as a second identifier
- Band on equipment accepted as valid
- Leading yes/no identity questions
- Drawing from chart location without person-specific checks
- Proceeding after a name/DOB mismatch because the patient "looks like" yesterday's draw
- Pre-labeling tubes before identification to save time (wrong-patient pathway)
Master I-A and you protect patients while securing points on the highest-weight work area.