Study guide
14.2 SDS & OSHA Hazard Communication
AMT Registered Phlebotomy Technician RPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day
2 Patient Identification & Test Prep
2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests
3 Collection Containers & Equipment
3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment
4 Venipuncture Sites & Technique
4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture
5 Order of Draw & Capillary Collection
5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures
6 Heel Stick, Post-Care & Specimen Integrity
6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity
7 Age Factors, Labeling & Arterial vs Venous
7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood
8 Specimen Processing & Special Collections
8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection
9 Delivery, Shipping & Patient Instructions
9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood
10 POCT & Quality Assurance
10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards
11 Time Management & Assignment Organization
11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate
12 Professional Communications
12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements
13 Clerical Skills & Duties
13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy
14 Safety Standards & Precautions
14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation
15 Complications & Facility Safety
15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety
16 Legal, Ethical & Professional Practice
16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent
17 Terminology, Anatomy & Physiology
17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy
14.2 SDS & OSHA Hazard Communication
Key Takeaways Explain This Topic AI
OSHA's Hazard Communication Standard (29 CFR 1910.1200) aligns with GHS and requires chemical classification, container labels, Safety Data Sheets, and employee training.
GHS-aligned SDS documents use 16 standardized sections; OSHA enforces content in sections 1–11 and 16, while sections 12–15 appear for GHS consistency but are not OSHA-enforced.
Hazard labels must include product identifier, signal word (Danger or Warning), hazard statement(s), pictogram(s), precautionary statement(s), and supplier identification.
Phlebotomists must know where SDS are kept, how to read first-aid and PPE sections before handling laboratory chemicals, and that secondary containers still need proper identification.
A written hazard communication program and immediate SDS access are employer responsibilities—not optional paperwork for collection staff to ignore.
Last updated: July 2026
SDS and OSHA Hazard Communication
Quick Answer: OSHA's Hazard Communication Standard (HCS) at 29 CFR 1910.1200 requires employers to communicate chemical hazards through GHS-aligned labels , 16-section Safety Data Sheets (SDS) , and employee training . Phlebotomists must know where SDS are stored and how to read Sections 2, 4, 7, and 8 before using unfamiliar disinfectants or lab chemicals.
Hazard Communication in the Phlebotomy Workplace
Blood is not the only hazard in a draw room or processing area. Phlebotomists routinely encounter chemical disinfectants, skin antiseptics, tube additives in bulk, and occasional spill-cleanup agents. OSHA's Hazard Communication Standard (HCS) , 29 CFR 1910.1200 , requires manufacturers, importers, distributors, and employers to communicate chemical hazards so workers can protect themselves. The modern HCS is aligned with the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS) .
HCS is sometimes nicknamed the "right-to-know" law. For the RPT exam, memorize the four operational pillars you will actually use:
- Hazard classification of chemicals
- Labels on shipped and workplace containers
- Safety Data Sheets (SDS)
- Employee information and training
Employers must also maintain a written hazard communication program describing how labels, SDS, and training are handled at that site.
Safety Data Sheets — The 16-Section Format
An SDS (formerly MSDS) is the detailed technical document for a hazardous chemical. Under HCS/GHS, SDS content appears in a fixed 16-section order so workers can find emergency information fast.
- SDS section Title What a phlebotomist uses it for
- 1 Identification Product name, synonyms, recommended use, supplier, emergency phone
- 2 Hazard(s) identification Classification, signal word, pictograms, hazard and precautionary statements
- 3 Composition / ingredients Hazardous ingredients and concentrations
- 4 First-aid measures Immediate actions for eye, skin, inhalation, ingestion exposures
- 5 Fire-fighting measures Suitable extinguishing media and special hazards
- 6 Accidental release measures Spill containment, cleanup, and protective equipment
- 7 Handling and storage Safe handling practices and incompatible storage
- 8 Exposure controls / PPE Exposure limits, engineering controls, required PPE
9 Physical and chemical properties Appearance, odor, flash point, pH, etc.
- 10 Stability and reactivity Conditions to avoid; incompatible materials
- 11 Toxicological information Routes of exposure, symptoms, acute/chronic effects
- 12 Ecological information Environmental effects (GHS consistency; not OSHA-enforced )
- 13 Disposal considerations Waste disposal guidance (GHS consistency; not OSHA-enforced )
- 14 Transport information Shipping classification (GHS consistency; not OSHA-enforced )
- 15 Regulatory information Other agency rules (GHS consistency; not OSHA-enforced )
- 16 Other information Preparation or revision date and other notes
Exam-critical nuance: SDS must include all 16 headings for GHS consistency, but OSHA does not enforce the content of sections 12–15 because those topics fall under other agencies' jurisdictions. Sections 1–11 and 16 are the OSHA-enforced information workers rely on for identification, hazards, first aid, spill response, handling, PPE, and toxicology.
In an emergency, go first to Section 4 (first-aid) and Section 2 (hazards) ; for planned handling, also read Section 7 and Section 8 .
Labels and Pictograms
Shipped hazardous chemical containers require GHS-aligned labels. Required label elements include:
Product identifier (must match SDS Section 1)
Signal word — only two are used: Danger (more severe) or Warning (less severe). A label carries only one signal word even if multiple hazards exist; Danger overrides Warning.
- Hazard statement(s) describing the nature of the hazard
- Pictogram(s) — standardized red-bordered diamond symbols
- Precautionary statement(s) describing prevention, response, storage, and disposal
- Supplier identification (name, address, telephone)
Workplace (secondary) containers that hold chemicals transferred from the original bottle still need clear identification so the next worker is not guessing contents. Facility policy may allow alternative workplace labeling systems if they convey the required hazard information and workers are trained—but unlabeled bleach bottles and mystery spray bottles are never acceptable practice.
Common pictogram associations you should recognize conceptually:
- Flame → flammables
- Corrosion → skin/eye damage or metal corrosion
- Skull and crossbones → acute toxicity
Health hazard → carcinogen, respiratory sensitizer, reproductive toxicity, etc.
- Exclamation mark → irritant / lower-severity acute toxicity categories
- Gas cylinder → gases under pressure
- Exploding bomb → explosives / self-reactives
- Flame over circle → oxidizers
Environment → aquatic toxicity ( non-mandatory : OSHA enforces only eight of the nine GHS pictograms, and aquatic toxicity falls outside OSHA's jurisdiction, so this one may appear only as supplementary information)
Chemical Hygiene Expectations for Collection Staff
"Chemical hygiene" means the practical habits that keep chemical exposures as low as reasonably achievable. Phlebotomy-relevant hygiene behaviors include:
Read the SDS before using an unfamiliar disinfectant or reagent.
Wear the PPE listed in SDS Section 8 (often gloves and eye protection for splashable liquids).
Store chemicals upright, capped, and away from incompatible materials listed in Section 10.
Never mix bleach with ammonia or acidic cleaners—toxic chloramine or chlorine gas can form.
Know the location of the SDS library (binder, intranet, or SDS kiosk) before a spill happens.
Report damaged labels and request replacement labels or a fresh SDS from the supervisor or chemical hygiene officer.
Larger laboratories often maintain a Chemical Hygiene Plan under the OSHA Laboratory standard ( 29 CFR 1910.1450 ) in addition to HCS. Even if your exam item only says "Hazard Communication," the practical expectation is the same: you can identify the chemical, understand its hazards, and protect yourself.
Employer Duties Phlebotomists Should Recognize
Although phlebotomists rarely write the hazard communication program, exam items may test whether you know what the employer must provide:
- Employer duty Practical meaning at the draw station
- Written HCS program Describes how SDS, labels, and training are managed
- SDS access SDS available for every hazardous chemical in the workplace without delay
- Container labeling Original and secondary containers properly identified
- Training Initial and refresher training on chemical hazards and protective measures
- Non-retaliation Workers may report chemical hazards without punishment
If you cannot locate an SDS for a chemical you are asked to use, stop and ask your supervisor. Using an unlabeled bulk disinfectant because "we always use it this way" violates the spirit and often the letter of HCS.
Scenario: Alcohol Prep vs. Bulk Bleach
A unit-dose isopropyl alcohol pad is a different risk profile from a gallon of concentrated sodium hypochlorite used to wipe a processing counter. Both can be hazardous chemicals under HCS if they meet classification criteria, but the bulk bleach bottle is the one where SDS Sections 2, 4, 6, 7, and 8 become mission-critical. If bleach splashes into an eye, Section 4 drives immediate irrigation and medical follow-up. If a bottle tips over, Section 6 guides spill response and whether respiratory protection or special ventilation is needed.
High-Yield Traps
Trap: "MSDS format is still the legal name and random section order is fine." Correction: Current HCS uses SDS with a fixed 16-section GHS order.
Trap: "OSHA grades every word in SDS Sections 12–15." Correction: Those headings must be present for GHS consistency, but OSHA does not enforce their content.
Trap: "Warning is stronger than Danger." Correction: Danger is the more severe signal word.
Trap: "Secondary spray bottles do not need labels if everyone on the unit knows what is inside." Correction: Workplace containers must still convey hazard information per HCS and facility policy.