Study guide
8.1 Non-Blood Specimen Integrity
AMT Registered Phlebotomy Technician RPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day
2 Patient Identification & Test Prep
2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests
3 Collection Containers & Equipment
3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment
4 Venipuncture Sites & Technique
4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture
5 Order of Draw & Capillary Collection
5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures
6 Heel Stick, Post-Care & Specimen Integrity
6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity
7 Age Factors, Labeling & Arterial vs Venous
7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood
8 Specimen Processing & Special Collections
8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection
9 Delivery, Shipping & Patient Instructions
9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood
10 POCT & Quality Assurance
10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards
11 Time Management & Assignment Organization
11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate
12 Professional Communications
12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements
13 Clerical Skills & Duties
13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy
14 Safety Standards & Precautions
14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation
15 Complications & Facility Safety
15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety
16 Legal, Ethical & Professional Practice
16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent
17 Terminology, Anatomy & Physiology
17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy
8.1 Non-Blood Specimen Integrity
Key Takeaways Explain This Topic AI
Non-blood specimens (sputum, stool, CSF, urine, and other body fluids) are only diagnostically useful when collection containers, timing, temperature, and labeling match the ordered test
Sputum for culture or AFB should be an early-morning deep-cough specimen in a sterile container—saliva or residual mouthwash fluid is not acceptable
Stool handling depends on the test: O&P needs preservative promptly; C. difficile usually requires soft/liquid stool; some enteric cultures must not be refrigerated
CSF and sterile body fluids require leak-proof sterile containers, immediate delivery, and never transport with a needle still attached to a syringe
Leaking, unlabeled, QNS, wrong-container, or delayed non-blood specimens should be rejected or held for laboratory consultation rather than forced through the workflow
Last updated: July 2026
Work Area II of the AMT RPT exam covers specimen collection and processing beyond the venipuncture itself. Domain II-A focuses on non-blood specimen integrity —keeping sputum, stool, cerebrospinal fluid (CSF), urine, and other body fluids suitable for the tests that were ordered. A perfectly labeled blood tube does not help the patient if the accompanying sputum cup is full of saliva, the stool O&P vial sat empty for hours, or a CSF syringe arrived with a needle still capped on the tip. Your job is to know which container, which temperature, and which delivery speed each specimen type needs—and when to stop the process and call the laboratory.
Why Non-Blood Integrity Matters
Blood specimens have standardized evacuated tubes. Non-blood specimens do not. A sterile screw-cap cup that is perfect for sputum culture is wrong for stool ova-and-parasite (O&P) testing if the laboratory requires a preservative vial. CSF left on a counter for hours may lose fragile organisms or cells. Formed stool submitted for Clostridioides difficile toxin or PCR testing is often rejected because colonization or toxin shedding patterns do not match what the assay is designed to detect in diarrheal disease.
Think of integrity as four linked controls:
Right specimen type for the order (deep cough sputum vs spit; liquid stool vs formed; midstream urine vs first-void).
Right container and preservative (sterile cup, anaerobic transport vial, O&P fixative, viral transport medium, boric acid urine preservative).
Right time and temperature from collection to receipt.
Right identity and documentation (two identifiers, source/site, collection time, collector initials).
If any one of those four fails, the laboratory result can mislead therapy even when the analyzer runs without error.
Sputum Specimens
Sputum is material from the lower respiratory tract. Patients often produce saliva instead, which contaminates culture with oral flora and yields false or useless results.
Collection expectations (typical laboratory practice):
Prefer first morning specimens when possible—overnight secretions pool in the airways and increase yield for mycobacteria and many bacterial pathogens.
Instruct the patient to rinse with water (not mouthwash with antibacterial agents unless the laboratory specifically allows it), take deep breaths, and cough deeply into a sterile, leak-proof screw-cap container .
Target volume is commonly about 5–10 mL of sputum, not a thin film of spit on the lid.
Cap tightly, bag in a biohazard specimen bag with the requisition in the outer pocket, and deliver promptly.
Integrity traps:
Problem Why it damages integrity What to do
Saliva only Oral flora dominate culture Recollect; coach deep cough or notify RT/nurse for induced sputum if ordered
Mouthwash residue Antimicrobial agents can suppress pathogens Water rinse only unless protocol says otherwise
Delayed room-temp hold for AFB/culture Overgrowth or death of organisms Deliver ASAP; follow lab policy for refrigeration of sputum when delay is unavoidable
Loose lid / leak Exposure risk and QNS Reject or recollect; never "top off" with another patient's specimen
Induced sputum (nebulized saline) and bronchoalveolar lavage are clinician/respiratory-therapy procedures. As an RPT, you may receive those containers for labeling and transport—verify identity, close lids, and move them quickly, but do not invent collection steps outside your scope.
For mycobacterial (AFB) workups, laboratories often request serial morning specimens on consecutive days . Do not pool multiple days into one cup unless the laboratory explicitly instructs you to; serial collections help distinguish true positives from contaminants and improve sensitivity.
Stool Specimens
Stool handling is test-specific. Memorizing one temperature rule for "all stool" will fail you on both the exam and the bench.
Common stool pathways:
Test / purpose Container / preservative Timing & temperature notes
Bacterial enteric culture Clean leak-proof container; some labs use Cary-Blair transport Deliver promptly; many labs advise do not refrigerate certain enteric culture specimens—follow local SOP
Ova & parasites (O&P) Preservative (fixative) vial(s) Transfer stool into preservative immediately after passage; fill to fill-line
C. difficile toxin/PCR Soft or liquid stool in clean container Formed stool often rejected; deliver per lab (often refrigerate if delayed)
Occult blood (FOBT/FIT) Kit cards or devices Follow kit instructions for diet restrictions and specimen spots
Fecal fat / special chemistries Timed collection containers Exact timing and diet instructions matter as much as the cup
Integrity rules you will be tested on:
Transfer stool for O&P into the preservative vial to the marked line as soon as possible . Unpreserved stool left sitting allows parasite morphology to degrade.
Do not overfill preservative vials—ratio of stool to fixative is part of the method.
Keep the outside of containers clean; fecal contamination on the exterior is a biohazard and a rejection reason.
Match the order: a C. difficile order is not interchangeable with a routine culture cup if the laboratory uses different acceptance rules.
When patients bring stool from home, verify collection time, that the correct kit was used, and that the specimen was not frozen or left in a hot car unless the kit allows it.
Urine and Other Body Fluids
Urine integrity depends on whether the order is routine chemistry, culture, or timed collection. A clean-catch midstream specimen in a sterile cup is standard for culture; a random specimen in a nonsterile container contaminates the result. Preservative tubes (boric acid, etc.) protect cell counts and some analytes when delay is unavoidable—use the tube the laboratory specifies.
CSF, synovial (joint), pleural, peritoneal, pericardial, and amniotic fluids are usually collected by physicians or advanced practitioners. The phlebotomy technician's integrity role is receiving, labeling, protecting, and transporting these specimens correctly—and refusing unsafe packaging.
Core CSF / sterile fluid practices:
Use sterile, leak-proof tubes or containers designated by the laboratory (often numbered CSF tubes for chemistry, microbiology, cell count, and hold).
Deliver immediately . Many organisms and cells are unstable; laboratories treat CSF as a STAT specimen.
Temperature depends on the test: microbiology culture specimens are generally kept at room temperature and processed ASAP; some PCR or specialized assays may specify ice— read the order and lab directory , do not invent a single rule.
Never transport a syringe with a needle attached. Needle-on-syringe specimens are a safety rejection. Cap with a sterile cap or transfer into a sterile tube per protocol.
Do not discard "extra" fluid. Residual volume may be needed for add-on tests that cannot be recollected without another lumbar puncture.
Other sterile body fluids follow the same leak-proof, prompt-delivery logic. If anaerobic culture is ordered, the collector may use an anaerobic transport vial; your job is to keep that vial closed, upright as directed, and moving toward microbiology without delay.
Labeling, Bagging, and Rejection Criteria
Non-blood specimens follow the same identity standard as blood: typically two unique patient identifiers , collection date/time, collector identification, and—critically— specimen source (sputum, stool, left knee fluid, CSF tube 2, and so on). Source errors send the wrong workup to the wrong bench.
Place primary containers in biohazard bags; keep paperwork outside the primary compartment when using two-pocket bags so leaks do not destroy the requisition. If a container arrives leaking, unlabeled, or with conflicting identifiers, follow laboratory rejection policy: quarantine, notify the ordering location, and document. Do not relabel another person's specimen based on "I think that's Mr. Smith's cup."
High-yield rejection triggers for Domain II-A:
- Unlabeled or mismatched identifiers
- Wrong container or missing preservative for the ordered test
- Quantity not sufficient (QNS)
- Leaking or grossly contaminated exterior
- Needle left on syringe
- Obvious wrong specimen type (saliva for sputum; formed stool for C. difficile when policy rejects it)
- Excessive delay beyond the laboratory's stability window
- Exam Scenarios to Rehearse
A nurse hands you a CSF syringe with the needle still on: stop, do not carry it through the hallway, and follow safety/rejection steps for transfer into a sterile tube.
A patient returns a stool O&P kit with stool stuck only on the lid of an empty preservative vial: integrity failed—recollect with proper fill.
Respiratory therapy delivers three AFB sputum cups labeled with the same time stamp from one morning: clarify whether they are true serial collections or a pooled error before accessioning as three distinct specimens.
Domain II-A is less about performing lumbar punctures and more about being the last barrier that keeps non-blood specimens honest. If the cup, clock, temperature, or label is wrong, the culture report is fiction—catch it before it reaches the analyzer.