Study guide
3.2 Collection Devices & Equipment
AMT Registered Phlebotomy Technician RPT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Eligibility Routes & Documentation 1.3 Scoring, Retakes, CCP & Test Day
2 Patient Identification & Test Prep
2.1 Identify the Correct Patient 2.2 Prepare the Patient for Tests
3 Collection Containers & Equipment
3.1 Specimen Containers & Identification 3.2 Collection Devices & Equipment
4 Venipuncture Sites & Technique
4.1 Select the Proper Venipuncture Site 4.2 Perform Venipuncture
5 Order of Draw & Capillary Collection
5.1 Proper Tube-Draw Sequence 5.2 Capillary Punctures
6 Heel Stick, Post-Care & Specimen Integrity
6.1 Infant Heel Punctures 6.2 Post-Care of Puncture Sites 6.3 Maintain Blood Specimen Integrity
7 Age Factors, Labeling & Arterial vs Venous
7.1 Physiological & Age-Related Collection 7.2 Labeling Including Blood Bank 7.3 Venous vs Arterial Blood
8 Specimen Processing & Special Collections
8.1 Non-Blood Specimen Integrity 8.2 Time, Temperature & Special Requirements 8.3 Blood Culture Collection
9 Delivery, Shipping & Patient Instructions
9.1 Department Delivery 9.2 Process Specimens for Shipping 9.3 Instruct Patients — Urine 9.4 Instruct Patients — Other Non-Blood
10 POCT & Quality Assurance
10.1 Point-of-Care Testing Specimens 10.2 Quality Assurance Standards
11 Time Management & Assignment Organization
11.1 Orders, Priorities & Path of Workflow 11.2 Tolerance Tests & TDM Scheduling 11.3 Escalate Problems & Cooperate
12 Professional Communications
12.1 Professional Communication Skills 12.2 Telephone Technique & Etiquette 12.3 Inform Patients of Special Requirements
13 Clerical Skills & Duties
13.1 Chart & File Lab Reports 13.2 Enter, Retrieve & Verify Collection Data 13.3 Inventory, Ordering & Restocking 13.4 Computer Skills for Phlebotomy
14 Safety Standards & Precautions
14.1 Regulatory & Standard-Setting Agencies 14.2 SDS & OSHA Hazard Communication 14.3 Universal/Standard Precautions 14.4 Infection Control & Isolation
15 Complications & Facility Safety
15.1 Syncope, Nausea, Vomiting & Convulsions 15.2 Nerve, Arterial, Hematoma & Related Injuries 15.3 Environmental & Facility Safety
16 Legal, Ethical & Professional Practice
16.1 Liability in Phlebotomy Practice 16.2 Ethical & Legal Duties 16.3 Professional Conduct & Appearance 16.4 Obtain Patient Consent
17 Terminology, Anatomy & Physiology
17.1 Medical Terminology Basics 17.2 Anatomy for Phlebotomy 17.3 Physiology for Phlebotomy
3.2 Collection Devices & Equipment
Key Takeaways Explain This Topic AI
Needle gauge numbers run inverse to bore size — 21-gauge is the routine adult default; smaller-bore 23-gauge suits fragile veins; 16–18-gauge may be used for large-volume or transfusion draws when policy allows
The evacuated tube system (ETS) is preferred for routine multisample adult venipuncture; winged infusion (butterfly) sets suit small or fragile veins; syringe transfer is reserved for very fragile veins or when vacuum is contraindicated, always using safety transfer devices
Apply a tourniquet 3–4 inches above the site, never longer than one minute (or per facility policy), and release it before drawing coagulation-sensitive tubes when protocol requires to avoid hemoconcentration
Cleanse venipuncture sites with 70% isopropyl alcohol (or chlorhexidine/povidone-iodine per order and site policy), allow complete drying, and never palpate an uncleaned site after disinfection
Activate needle safety devices immediately after use and dispose of sharps in an approved puncture-resistant container filled only to the fill line — never recap needles by hand
Last updated: July 2026
Collection Devices & Equipment
Quick Answer: Domain I-M tests whether you can choose and safely use the right collection hardware — usually a 21-gauge multisample needle with an evacuated tube holder for routine draws, a winged set or syringe when veins are fragile, a tourniquet applied briefly to distend the vein, alcohol or ordered antiseptic allowed to dry fully, and immediate disposal of activated sharps in an approved container.
Equipment selection bridges anatomy and laboratory science. The RPT exam presents scenarios where the "best" device depends on vein quality, volume needed, patient age, test type, and safety engineering available in your facility. Knowing names is not enough; you must predict outcomes — hemolysis from tiny gauges under strong vacuum, blown veins from oversized needles, false coagulation results from prolonged tourniquet time, and needlestick injuries from recapping.
Evacuated Tube System (ETS)
The evacuated tube system — also called a Vacutainer-style or multisample system — is the default for routine adult venipuncture when veins are adequate and multiple tubes are ordered.
Components and assembly
Multisample needle — hollow needle beveled on both ends: patient end enters the vein; holder end pierces tube stoppers sequentially without removing the needle.
Needle holder (tube adapter) — rigid plastic barrel that threads onto the needle hub and guides tubes during fill. Some products integrate holder and needle as a single safety device.
Evacuated tubes — discussed in Section 3.1; vacuum pulls blood once the stopper is punctured.
Assemble the needle into the holder before patient contact. Confirm the safety mechanism type (hinged cap, sliding sheath, etc.) and how it activates after the draw. With the tourniquet in place and the vein anchored, insert at the facility-approved angle (often 15–30 degrees), engage the first tube, and follow the laboratory order-of-draw sequence.
Advantages: Speed for multiple tubes, reduced needle manipulations, standardized fill volumes.
Limitations: Strong vacuum can collapse fragile veins; not ideal for every geriatric or oncology patient without adaptation.
Winged Infusion Sets ("Butterfly" Needles)
A winged infusion set connects a short needle to flexible tubing and a Luer fitting. Tubes attach directly or through a transfer device.
Use winged sets when:
- Hand, wrist, or small antecubital veins require shallow, controlled entry
- Pediatric or geriatric patients have delicate vessels
- The patient is anxious and benefits from lower-profile hardware
Winged needles are commonly 23 gauge with lengths such as ½ inch or ¾ inch. Because vacuum is farther from the vein, fills may be slower — watch for clotting in the first tube if flow is sluggish.
Safety note: The tubing can rebound; stabilize wings with tape if policy allows and keep fingers clear during activation.
Syringe Collection and Transfer
Syringe venipuncture draws blood without direct vacuum on the vein. It is reserved for veins that collapse under ETS vacuum or when policy limits vacuum (some pediatric protocols).
Critical rules for RPT candidates:
Use a syringe only when clinically indicated — it adds transfer steps and injury risk.
Never squirt blood forcefully into tubes; that hemolyzes cells.
Transfer through a safety transfer device (shielded needle or fill device) rated for the tube type.
Maintain order of draw during transfer exactly as with direct ETS fills.
Fill citrate tubes to the line — syringe draws make volume judgment harder; use marked tubes and stop at the indicator.
Syringe technique is slower but can salvage a draw that would otherwise fail with multisample holders.
ETS vs Winged Set vs Syringe — Decision Guide
Factor Evacuated tube system (multisample) Winged infusion set Syringe + transfer
Typical patient Healthy adult with visible antecubital vein Small/hand veins, pediatrics, some geriatrics Fragile veins that collapse under vacuum
Speed for multiple tubes Fastest Moderate Slowest
Hemolysis risk Higher if gauge too small or vacuum strong Moderate; slow flow may clot first tube High if transfer is forceful
Needlestick exposure One insertion; safety activation on withdrawal Flexible tubing; watch rebound Extra transfer step increases risk if unsafe
Exam buzzwords "Routine draw," "multiple tubes ordered" "Fragile hand vein," "difficult access" "Vacuum collapses vein," "very fragile"
Needle Gauge Reference
Gauge (G) describes bore diameter. The numbering is inverse : higher gauge = smaller hole.
- Gauge Relative bore Typical phlebotomy use
- 16–18 G Largest listed Blood bank large-volume draws, trauma protocols, therapeutic phlebotomy (per policy)
- 21 G Medium — routine adult default Standard antecubital venipuncture with ETS
- 22 G Medium-small Alternative when 21 G is unavailable; some hand veins
- 23 G Small Winged sets, fragile veins, pediatrics
25 G Very small Winged sets for neonates or severely compromised venous access only; CLSI GP41 notes some 25 G needles raise hemolysis risk. Capillary lancets are specified by incision depth , not gauge
Using an unnecessarily small gauge with strong vacuum increases shear stress on red cells → hemolysis → falsely elevated potassium, LDH, and magnesium, and depressed some chemistry results. Using an oversized needle on a tiny vein increases hematoma and nerve injury risk.
Tourniquets
The tourniquet distends veins by temporarily slowing venous return. Proper technique:
Place 3–4 inches (7–10 cm) above the intended puncture site — never on an extremity with a fistula, IV infusion, mastectomy side (unless explicitly ordered), or suspected thrombosis.
Tighten enough to impede venous flow but not arterial flow — the patient should still feel distal pulses and have normal skin color.
Limit duration to one minute. If vein selection runs longer, release the tourniquet, wait about two minutes, and reapply. Prolonged application causes hemoconcentration of protein-bound analytes and can alter coagulation testing.
Release the tourniquet as soon as blood flow is established, and in every case within one minute of application.
Always remove the tourniquet before withdrawing the needle.
Latex-free disposable tourniquets reduce allergy risk. Never reuse a tourniquet between patients.
Antiseptics and Site Preparation
Site prep prevents bloodstream infection — especially for blood cultures — and reduces colonization of the puncture wound.
Agent Common use Key points
70% isopropyl alcohol Default venipuncture cleanse Single-use pad; concentric circles from center outward; allow to air-dry completely (about 30 seconds) before puncture
2% chlorhexidine gluconate in 70% alcohol Preferred blood-culture prep (outside the youngest infants) and central-line draws Apply for the manufacturer's contact time; let dry; do not wipe off
Povidone-iodine / iodine tincture Blood-culture fallback when chlorhexidine is contraindicated Must dry fully; iodophor alone without adequate alcohol contact is inferior for cultures
Benzalkonium chloride, aqueous povidone-iodine, or soap and water Legal/forensic blood alcohol Never use an alcohol-based prep for an ethanol draw — the specimen can be challenged as contaminated
Never palpate the site with ungloved fingers after cleansing — re-clean if you must re-palpate. For blood cultures, disinfect bottle tops per laboratory procedure and maintain sterile technique for the collection duration.
Allergies matter: ask about chlorhexidine or iodine sensitivity when those agents are on the order. Alcohol is flammable; keep it away from active oxygen sources until dry.
Sharps Safety and Disposal
Needlestick injuries remain a leading occupational hazard. OSHA's Bloodborne Pathogens Standard requires engineering controls and work practice controls.
Mandatory practices tested on the RPT:
Do not recap needles by hand unless a specific one-handed scoop technique is approved — many facilities ban recapping entirely.
Activate safety devices immediately after the last tube fills or syringe transfer completes — audible click or visual lock confirmation.
Dispose of needles intact in a puncture-resistant sharps container at the point of use.
Fill sharps containers only to the fill line (commonly about three-quarters full); replace before overfilling forces needles to protrude.
Never place sharps in regular trash, linen hampers, or biohazard bags meant for soft waste.
If a needlestick occurs, wash the area, report immediately per exposure control plan, and document the source patient when permissible for post-exposure evaluation.
Additional Equipment You May See on Exams
Gauze or cotton ball — apply with pressure after needle withdrawal; bandage as needed.
Tube racks and carriers — keep labeled tubes upright; use padded transport for cultures.
Personal protective equipment (PPE) — gloves at minimum; face protection if splash risk.
Hand hygiene — before and after every patient contact, even when gloves are worn.
Equipment-Centered Scenario Checklist
When a test question describes a patient, run this mental sequence:
Vein quality — robust antecubital vs fragile hand vein?
Volume and tube count — single tube vs full culture set and chemistries?
Gauge and device — 21 G ETS vs 23 G butterfly vs syringe transfer?
Tourniquet timing — release before citrate fill if required?
Antiseptic — alcohol dry time vs iodine/chlorhexidine culture protocol?
Sharps finish — safety device activated into approved container?
Competent equipment use protects patients from hemolyzed specimens, contaminated cultures, and hematomas — and protects you from preventable needlestick injuries.