Study guide

1.3 Key Process Variables, Morphology Patterns & NDE Terminology

API 571 Corrosion and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals

1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology

2 Chapter 2: Atmospheric, Water & Soil Corrosion

2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion

3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss

3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation

4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion

4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion

5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems

5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)

6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services

6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion

7 Chapter 7: High-Temperature Oxidation & Sulfidation

7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)

8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions

8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion

9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture

9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating

10 Chapter 10: Wet H2S Cracking Mechanisms

10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)

11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking

11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

12 Chapter 12: Environmental Cracking in Chemical & Refining Services

12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC

13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue

13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue

14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation

14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons

15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure

15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging

16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking

16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)

17 Chapter 17: Environmental Embrittlement & Specialized Hydriding

17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding

1.3 Key Process Variables, Morphology Patterns & NDE Terminology

Key Takeaways Explain This Topic AI

Operating temperature exponentially impacts corrosion kinetics according to the Arrhenius relationship (roughly doubling reaction rates per 10 deg C / 18 deg F rise), while governing phase transitions including acid condensation dew points.

Fluid velocity and turbulence strip protective passivating and semi-protective sulfide/carbonate films when local shear stresses exceed critical thresholds, transitioning uniform attack into catastrophic erosion-corrosion.

Environmental and chemical degradation patterns are visually and micro-structurally classified into uniform wall loss, localized pitting/crevice attack (ASTM G46), intergranular cracking (sensitized boundaries), and transgranular cracking (mechanical fatigue or chloride SCC).

Fractographic signatures distinguish failure modes: brittle cleavage exhibits microscopic river patterns and flat facets without plastic deformation; ductile overload displays dimpled microvoid coalescence; fatigue displays macroscopic beach marks and microscopic striations.

API RP 571 lists specialized NDE methods: straight beam UT and profile RT quantify wall loss; Phased Array UT (PAUT) and Time of Flight Diffraction (TOFD) size volumetric crack depths; Wet Fluorescent Magnetic Particle Testing (WFMT) is the primary detection tool for surface-breaking wet H2S cracking.

Last updated: September 2026

1.3 Key Process Variables, Morphology Patterns & NDE Terminology

Accurate failure investigation, damage mechanism identification, and inspection planning under API RP 571 require mastery of three interconnected engineering disciplines:

Analyzing how process and environmental variables dictate degradation thermodynamics and kinetics.

Recognizing the specific visual, macro-structural, and micro-metallurgical damage morphology produced by each mechanism.

Selecting the optimal Non-Destructive Examination (NDE) techniques capable of detecting, mapping, and sizing flaws in operating plant equipment.

Critical Process and Environmental Variables

Every damage mechanism documented in API RP 571 operates within a specific window of physical and chemical parameters. Changes in process conditions—whether during steady-state operations, feed transitions, or transient startups and shutdowns—can dramatically activate or accelerate damage.

1. Temperature and Thermal Thresholds

Temperature is the single most pervasive operating variable influencing degradation rates:

Arrhenius Reaction Kinetics: For chemical and activation-controlled electrochemical reactions, reaction velocity constants follow the Arrhenius relationship:

k = A · exp(-Ea / (R · T))

As a general engineering rule of thumb, the reaction rate approximately doubles for every 18 °F (10 °C) increase in temperature.

Acid Dew Point Condensation: Highly corrosive mineral and organic acids condense from vapor phase to aqueous liquid at specific dew points:

Sulfuric Acid (H₂SO₄): In flue gases containing sulfur trioxide (SO₃), acid dew points commonly fall between 260 °F and 320 °F (127 °C to 160 °C) ; RP 571 cites a typical sulfuric acid dew point of about 280 °F (138 °C) .

Hydrochloric Acid (HCl): In atmospheric crude tower overheads, HCl gas dissolves into the first droplets of water that form at the initial water dew point (commonly about 200 °F to 240 °F / 93 °C to 116 °C, depending on pressure and steam rate), causing aggressive localized thinning of carbon steel. In fired-heater flue gas, RP 571 gives a typical HCl dew point of about 130 °F (54 °C) .

Ammonium Salt Deposition: Solid ammonium chloride (NH₄Cl) and ammonium bisulfide (NH₄HS) deposit directly from the gas phase at temperatures well above the water dew point, absorbing trace moisture to form concentrated, acidic corrosive pastes.

High-Temperature Metallurgical Transformation Thresholds:

Graphitization: Carbon steel after long exposure above about 800 °F (427 °C) ; C-0.5Mo above about 875 °F (468 °C) .

Creep and Stress Rupture: RP 571 threshold temperatures start at 650 °F (343 °C) for carbon steel with tensile strength up to 60 ksi and 700 °F (371 °C) above 60 ksi; 1.25Cr through 9Cr-1Mo steels start at 800 °F (427 °C) .

885 °F (475 °C) Embrittlement: Embrittles ferrite-containing stainless steels (400 series and duplex) exposed within 600 °F to 1,000 °F (316 °C to 540 °C) , most rapidly near 885 °F.

2. Fluid Velocity, Flow Regime & Wall Shear Stress

The hydrodynamic behavior of flowing streams dictates whether protective films persist or fail:

Stagnant / Low Velocity (< 3 ft/s / < 0.9 m/s): Allows entrained solids, silt, and water droplets to settle out in piping low points and deadlegs. This promotes localized under-deposit corrosion, concentration cells, and Microbiologically Influenced Corrosion (MIC) .

Moderate Velocity (3 - 10 ft/s / 0.9 - 3.0 m/s): Typically the ideal operational envelope; maintains solids in suspension and sweeps away gas bubbles without stripping protective corrosion product scales.

Excessive Velocity and Turbulence (> 15 - 20 ft/s / > 4.5 - 6.0 m/s): Generates high wall shear stress that mechanically thins the hydrodynamic boundary layer and scours away protective oxide, iron sulfide (FeS), or iron carbonate (FeCO₃) films. This triggers erosion-corrosion , cavitation, and severe impingement attack at piping elbows, tees, reducers, and control valves.

3. pH Regimes and Solution Acidity

Electrolyte pH determines the active cathodic reaction and governs the thermodynamic stability of protective corrosion product films:

Strong Acid Regime (pH < 4.0): Carbon steel dissolves rapidly via hydrogen evolution (2H⁺ + 2e⁻ → H₂). Protective iron oxide, sulfide, and carbonate films are chemically dissolved.

Neutral to Moderately Alkaline Regime (pH 4.0 - 10.0): Typical operating range for cooling waters, treated boiler feedwaters, and stabilized sour waters. Dissolved oxygen reduction is the primary cathodic driver; semi-protective siderite (FeCO₃) or mackinawite (FeS) scales remain stable.

Strong Alkaline / Caustic Regime (pH > 12.0): At ambient temperatures, carbon steel passivates; however, at temperatures above 150 °F to 180 °F (65 °C to 82 °C) , concentrated sodium hydroxide (NaOH) causes Caustic Gouging and drives intergranular Caustic Stress Corrosion Cracking (Caustic Embrittlement) .

4. Dissolved Gases and Chemical Contaminants

Chemical Species Critical Concentration / Context Induced API RP 571 Damage Mechanism

Dissolved Oxygen (O₂) > 5 - 10 ppb in boiler feedwater Deep localized oxygen pitting in economizers and boiler steam drums.

Hydrogen Sulfide (H₂S) About 50 ppmw in the water phase is a common screening level (damage has been reported lower) Wet H₂S damage: Sulfide Stress Cracking (SSC), HIC, SOHIC, blistering.

Carbon Dioxide (CO₂) Rises with CO₂ partial pressure (industry rule of thumb: corrosive above about 3 psia, severe above about 30 psia) CO₂ corrosion of carbon steel; localized thinning, pitting, and flow-related grooving.

Chlorides (Cl⁻) No practical lower limit when evaporation or deposits concentrate chlorides Chloride Stress Corrosion Cracking (Cl- SCC); pitting under deposits and insulation.

Cyanides (CN⁻) Trace levels in FCC / Coker gas plants Complex with protective FeS scales, accelerating atomic hydrogen charging into steel.

Ammonium Bisulfide (NH₄HS) Concentrations > 2 - 8 wt% Severe, velocity-sensitive alkaline sour water thinning of hydroprocessing air coolers.

Visual and Metallurgical Damage Morphology Patterns

Damage morphology describes the physical shape, orientation, and metallurgical characteristics of metal degradation. Accurately classifying morphology in the field is essential to identify the underlying damage mechanism. DAMAGE MORPHOLOGY CLASSIFICATION

  • |
  • +-----------------------------------------+-----------------------------------------+
  • | | |
  • v v v
  • +------------------+ +------------------+ +------------------+
  • | General Thinning | | Localized Attack | | Cracking Modes |
  • | - Uniform Loss | | - Pitting | | - Intergranular |
  • | - Broad Washing | | - Crevices | | - Transgranular |
  • | - Atmospheric | | - Gouging | | - Environmental |
  • +------------------+ +------------------+ +------------------+
  • 1. General vs. Localized Metal Loss

General / Uniform Wall Thinning: Metal loss proceeds at an approximately equal rate across the entire exposed surface. Typical of atmospheric corrosion, high-temperature sulfidation in uninhibited gas streams, and high-temperature oxidation. Thickness loss is predictable and easily quantified by routine ultrasonic thickness spot measurements.

Localized Pitting: Severe, highly concentrated metal loss occurring at isolated microscopic sites while the surrounding surface remains unattacked or passivated. Characterized by high depth-to-width aspect ratios. ASTM G46 provides the standard methodology for rating pitting density, size, and penetration depth.

Crevice Corrosion: Intense localized attack occurring within occluded, shielded geometry gaps (under gaskets, beneath heat exchanger tube sheets, under scale/debris, or at overlap welds) where mass transfer of bulk fluid is restricted, causing local oxygen depletion, chloride accumulation, and aggressive acidification.

2. Crack Propagation Paths: Intergranular vs. Transgranular

When inspecting cracked components using optical metallography or scanning electron microscopy (SEM), the crack propagation pathway establishes the root cause:

Intergranular Cracking (IG): Cracks propagate exclusively along the crystalline grain boundaries of the metal lattice. Intergranular attack occurs when grain boundaries are chemically altered or sensitized:

Sensitization of 300-Series Stainless Steels: Chromium carbides (Cr₂₃C₆) precipitate at grain boundaries upon exposure to about 750 °F - 1,500 °F (400 °C - 815 °C), depleting adjacent zones of protective chromium (< 10.5%).

Associated Mechanisms: Polythionic Acid SCC (PASCC), Caustic Stress Corrosion Cracking, Intergranular Corrosion of austenitic alloys, and Stress Relaxation Cracking.

Transgranular Cracking (TG): Cracks cut directly through the crystalline grains, cleaving across the metal lattice without following grain boundaries:

Morphology: Frequently displays multi-directional branching, described as a "river" or "lightning bolt" pattern.

Associated Mechanisms: Chloride Stress Corrosion Cracking (Cl- SCC) in austenitic stainless steels, Mechanical Fatigue, Thermal Fatigue, and Corrosion Fatigue.

Metallurgical Fractography: Distinguishing Brittle, Ductile, and Fatigue Failures

When pressurized equipment experiences through-wall fracture, fractographic analysis of the fracture faces provides conclusive evidence of the operating stress state and failure mode.

Failure Mode Macroscopic Appearance Microscopic (SEM) Appearance Key Mechanism Context

Brittle Fracture (Cleavage) Flat, shiny, highly reflective facets; no macroscopic necking; sharp chevron marks pointing back to fracture origin. Transgranular cleavage facets; microscopic "river patterns" marking local crack progression steps. Low-temperature operating excursions below DBTT; 885 °F embrittlement; Temper embrittlement.

Ductile Rupture (Shear) Extensive gross plastic deformation; wall thinning; elongation; 45° shear lips along final rupture edges. Microvoid coalescence (MVC); equiaxed or elongated microscopic hemispherical dimples. Short-term thermal overheating; mechanical overpressurization beyond tensile ultimate strength.

Mechanical / Thermal Fatigue Smooth, flat fracture plane; macroscopic concentric "beach marks" (clamshell lines) radiating from initiation notch. Microscopic fatigue striations; each individual striation represents crack growth from a single stress cycle. Vibration at small-bore piping connections; thermal cycling at mixing tees and quench nozzles.

Hydrogen Embrittlement Macro-brittle appearance; lack of gross plastic deformation; initiation at high triaxial stress concentrations. Intergranular separation ("rock candy" morphology) or quasi-cleavage with hairline micro-cracks. High-strength bolting (> 32 HRC); hard heat-affected zones (HAZ) in sour service.

API RP 571 Non-Destructive Examination (NDE) Methodologies

Non-Destructive Examination (NDE) methods must be matched to the specific damage morphology, material properties, and geometry of the component. API RP 571 lists the inspection and monitoring methods that are effective for each mechanism.

1. Ultrasonic Testing (UT)

Straight Beam (0° Compression) UT: Employs longitudinal sound waves traveling perpendicular to the test surface. Primarily used for remaining wall thickness measurement, laminar flaw detection, and mapping the planar extent of internal hydrogen blisters.

Shear Wave (Angle Beam) UT: Uses mode-converted shear waves introduced at specific angles (typically 45°, 60°, or 70°). Essential for volumetric inspection of welds to detect planar weld flaws and environmental cracks.

Phased Array Ultrasonic Testing (PAUT): Employs an array of dozens of independently pulsed piezo-electric elements. By electronically steering and focusing the ultrasonic beam across a range of angles (sectorial S-scan), PAUT produces high-resolution cross-sectional images of complex crack profiles, flange faces, and weld volumes.

Time of Flight Diffraction (TOFD): Utilizes a pair of angled probes (transmitter and receiver) positioned across the weld. Rather than relying on reflected sound, TOFD detects the low-amplitude diffracted sound waves originating from the top and bottom tips of a flaw. TOFD provides exceptional through-wall crack depth and height sizing accuracy , largely independent of flaw tilt and orientation.

Pulsed Eddy Current (PEC): Uses electromagnetic pulses to induce transient eddy currents through insulation, weather jacketing, and fireproofing. Measures the average remaining wall thickness over a broad footprint, serving as the industry standard screening tool for Corrosion Under Insulation (CUI) without stripping jacketing.

2. Radiographic Testing (RT)

Profile Radiography: Uses an external radioactive source (Iridium-192, Cobalt-60, or Selenium-75) or X-ray tube to shoot a tangential beam across the profile of an insulated pipe. Accurately reveals internal scale buildup, generalized wall thinning, and external CUI on piping ≤ 12 in. without insulation removal.

Digital Radiography (DR) / Computed Radiography (CR): Replaces traditional silver halide film with re-usable phosphor imaging plates (CR) or flat panel digital detector arrays (DR). Provides immediate digital archiving, wide dynamic exposure ranges, and computerized image enhancement.

3. Surface Crack Detection Methods

Wet Fluorescent Magnetic Particle Testing (WFMT): The most critical NDE surface technique in petroleum refining. Performed on ferromagnetic materials (carbon and low-alloy steels) using an AC or articulated DC yoke while flooding the surface with fluorescent iron oxide particles suspended in a light carrier fluid under ultraviolet (black light, UVA ≈ 365 nm) illumination. WFMT is the industry benchmark for detecting fine, tight, surface-breaking wet H₂S cracking (SSC, SOHIC) and amine/carbonate cracks .

Liquid Penetrant Testing (PT): Employs solvent-removable or water-washable dyes (visible red or fluorescent) that enter surface-breaking defects via capillary action. Mandatory for surface crack detection on non-ferromagnetic alloys (300-series austenitic stainless steels, nickel alloys, copper alloys, and titanium) where magnetic particle testing is physically impossible. PT cannot detect subsurface defects and requires extensive surface cleaning to remove oils, scale, and carbon deposits that plug crack openings.

4. Specialized Heat Exchanger Tubing NDE

Eddy Current Testing (ECT): Uses electromagnetic induction to detect wall thinning, pitting, and cracking in non-ferromagnetic heat exchanger tubes (brasses, copper-nickel, austenitic stainless steels, and titanium).

Remote Field Eddy Current (RFET): An electromagnetic technique designed specifically for inspecting ferromagnetic (carbon steel) heat exchanger and boiler tubes from the inside diameter, transmitting signals through the tube wall to measure wall loss.

Internal Rotating Inspection System (IRIS): An ultrasonic immersion technique utilizing a high-frequency transducer and a rotating 45° acoustic mirror inside water-flooded tubes. Generates precise, full 360-degree wall thickness profiles capable of sizing both internal and external pits in virtually all tube materials.

5. Acoustic Emission Testing (AET)

Utilizes arrays of highly sensitive piezoelectric sensors attached to vessel walls during controlled hydrostatic pressure tests or operational stress increases. AET detects transient, high-frequency elastic stress waves released by active crack propagation, plastic deformation, or fiber breakage, locating dynamically propagating defects throughout massive pressure vessels in real time.

Comprehensive NDE Selection Matrix for API RP 571 Damage Mechanisms

Damage Classification Primary Recommended NDE Method Secondary / Complementary Method Common Mechanism Applications

Uniform Wall Loss Straight-Beam Ultrasonic Thickness Gauging (UT) Profile Radiography (RT), Pulsed Eddy Current (PEC) Atmospheric corrosion, Sulfidation, Flue gas dew point corrosion.

Pitting & Crevice Corrosion Internal Rotating Inspection System (IRIS), Borescope Visual (VT) Radiographic Testing (RT), Eddy Current Testing (ECT) Cooling water corrosion, Oxygen pitting, Boiler condensate corrosion.

Surface Environmental Cracking (Ferrous) Wet Fluorescent Magnetic Particle Testing (WFMT) Shear Wave Angle-Beam UT, Alternating Current Field Measurement (ACFM) Sulfide Stress Cracking (SSC), Amine SCC, Carbonate SCC, Caustic SCC.

Surface Environmental Cracking (Non-Ferrous) Liquid Penetrant Testing (PT) Eddy Current Testing (ECT), Phased Array UT (PAUT) Chloride SCC (300 SS), Polythionic Acid SCC, Caustic cracking of nickel alloys.

Through-Wall Crack Sizing (Volumetric) Time of Flight Diffraction (TOFD), Phased Array UT (PAUT) High-Resolution Shear Wave UT, Radiographic Testing (RT) Wet H₂S crack growth, Thermal fatigue cracks, Reheat cracking.

Internal Hydrogen Blistering & Laminations Straight-Beam UT Thickness & Mapping Phased Array UT (PAUT), Angle-Beam UT Hydrogen blistering, Hydrogen-Induced Cracking (HIC) in sour vessels.

High-Temperature Hydrogen Attack (HTHA) Advanced PAUT, TOFD, Spatial Frequency / Spectral Analysis In-situ Metallographic Replication (metallurgy screening) Nelson Curve services, Hydrocracker reactors, Catalytic reformer piping.

API RP 571 Section 2 Terms and Acronyms You Must Recognize

The API 571 Body of Knowledge lists Terms, Definitions, and Acronyms as its first category. RP 571 Section 2 defines material families and abbreviations that appear throughout the mechanism write-ups, and exam stems use them without explanation. The definitions below are paraphrased study summaries.

Term What it means on the exam

Carbon steel Iron-carbon steel without deliberate additions of chromium, molybdenum, or other alloying elements beyond small amounts of manganese and silicon.

Low alloy steel Steel containing up to 9% chromium plus other additions such as molybdenum (for example C-0.5Mo, 1.25Cr-0.5Mo, 2.25Cr-1Mo, 5Cr-0.5Mo, 9Cr-1Mo). A 12% Cr steel is a 400 series stainless steel, not a low alloy steel.

Austenitic Face-centered cubic structure, nonmagnetic in the annealed condition; 300 series stainless steels and many nickel alloys.

Ferritic Body-centered cubic structure, magnetic; carbon steel, low alloy steels, and ferritic 400 series grades such as 405, 409, 430, and 446.

Martensitic Hard, magnetic structure formed by rapid cooling; martensitic 400 series grades such as 410 and 420.

Duplex stainless steel Roughly half austenite and half ferrite (for example 2205, 2304, 2507); stronger and more Cl⁻ SCC-resistant than 300 series, but susceptible to 885 °F and sigma embrittlement.

300 / 400 series SS Austenitic Cr-Ni stainless steels / ferritic or martensitic straight-chromium stainless steels.

Heat-affected zone (HAZ) Base metal next to a weld whose microstructure and hardness were altered by welding heat but did not melt.

PWHT Postweld heat treatment: a controlled reheat that relieves residual stress and tempers hard weld and HAZ microstructures.

Amines (MEA, DEA, MDEA, DIPA, DGA) Monoethanolamine, diethanolamine, methyldiethanolamine, diisopropanolamine, and diglycolamine used to remove H2S and CO2.

Wet H2S acronyms HIC (hydrogen-induced cracking), SOHIC (stress-oriented HIC), SSC (sulfide stress cracking).

Other damage acronyms CUI (corrosion under insulation), MIC (microbiologically influenced corrosion), HTHA (high-temperature hydrogen attack), PASCC (polythionic acid SCC), DMW (dissimilar metal weld), LME (liquid metal embrittlement).

NDE acronyms UT, SWUT (shear wave UT), PAUT, TOFD, AUBT (advanced ultrasonic backscatter technique), RT, MT, WFMT, PT, ET/ECT, RFET, IRIS, ACFM, AE, EMAT, PEC, VT.

Two classic trap items: a question describing "low alloy steel" never includes 12Cr or 300 series stainless steels, and "400 series SS" includes both ferritic and martensitic grades, which matters for 885 °F embrittlement, sigma, and brittle fracture questions.

Loading diagram... Damage Morphology to NDE Method Selection Decision Tree