Study guide
2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion
API 571 Corrosion and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals
1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology
2 Chapter 2: Atmospheric, Water & Soil Corrosion
2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion
3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss
3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation
4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion
4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion
5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems
5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)
6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services
6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion
7 Chapter 7: High-Temperature Oxidation & Sulfidation
7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)
8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions
8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion
9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture
9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating
10 Chapter 10: Wet H2S Cracking Mechanisms
10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)
11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking
11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)
12 Chapter 12: Environmental Cracking in Chemical & Refining Services
12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC
13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue
13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue
14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation
14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons
15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure
15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging
16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking
16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)
17 Chapter 17: Environmental Embrittlement & Specialized Hydriding
17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding
2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion
Key Takeaways Explain This Topic AI
Cooling water corrosion is driven by dissolved oxygen and flow velocity boundaries: velocities below 3 ft/s permit silt deposition and underdeposit pitting, while velocities above 8 to 10 ft/s cause erosion-corrosion.
The Langelier Saturation Index (LSI) and Ryznar Stability Index (RSI) predict scaling versus corrosive tendencies: positive LSI (>0) and low RSI (<6.0) promote protective CaCO3 scale, while negative LSI (<0) and high RSI (>7.0) indicate aggressive corrosive water.
Economizers and boiler feedwater lines experience severe localized oxygen pitting when dissolved oxygen exceeds 7 parts per billion (ppb), forming deep pits capped with iron oxide tubercles.
Carbonic acid grooving produces distinctive smooth, sharp-edged channeling along the bottom (invert) of horizontal steam condensate return piping due to carbon dioxide dissolution, controlled via neutralizing and filming amines.
Caustic gouging develops in boiler generating tubes when high heat flux beneath porous magnetite deposits concentrates sodium hydroxide up to 10% to 40%, dissolving the protective Fe3O4 layer as soluble sodium ferrate.
Last updated: September 2026
Water-Side Industrial Degradation Mechanisms
Water is the universal heat transfer medium in process refining, chemical manufacturing, and power generation. Industrial water systems encompass open and closed cooling water circuits ( API RP 571 Section 3.20 ), high-pressure steam generation boilers and condensate return networks ( API RP 571 Section 3.9 ), and oxygen-contaminated process water piping ( API RP 571 Section 3.49 ).
Although water appears non-hazardous compared to hydrocarbon streams, untreated or improperly balanced water is aggressively corrosive to carbon steels, copper alloys, and stainless steels. Metal loss manifests across a broad spectrum of morphology—from uniform thinning and underdeposit pitting to sharp carbonic acid channeling and destructive caustic gouging.
- Cooling Water Corrosion (API RP 571 Section 3.20)
- System Classifications and Susceptible Materials
Once-Through Systems : Water is drawn from a river, lake, or ocean, pumped once through process heat exchangers, and discharged. Dissolved oxygen is continuously saturated, and mineral content reflects the raw source.
Open Evaporative Recirculating Systems : Cooling tower systems where warm water cascades over tower fill. Evaporation dissipates heat, continuously concentrating dissolved mineral solids (cycles of concentration) and fully saturating the water with atmospheric oxygen.
Closed Recirculating Systems : Chilled water or jacket cooling loops circulating in closed circuits with minimal evaporation or makeup water. Dissolved oxygen can be eliminated chemically, resulting in far lower baseline corrosivity.
Susceptible Materials : Carbon steel (general thinning and underdeposit pitting), copper alloys (admiralty brass, 90/10 and 70/30 copper-nickel; vulnerable to dezincification and erosion), and 300-series austenitic stainless steels (resistant to general loss, but highly vulnerable to pitting, crevice attack, and chloride stress corrosion cracking above 140 °F / 60 °C).
Critical Factors in Cooling Water Systems
Dissolved Oxygen :
Dissolved oxygen acts as the primary cathodic reactant driving iron dissolution: O 2 + 2 H 2 O + 4 e − → 4 OH − \text{O}_2 + 2\text{H}_2\text{O} + 4e^- \rightarrow 4\text{OH}^- O 2 + 2 H 2 O + 4 e − → 4 OH − . In open cooling towers, oxygen is constantly replenished to saturation levels (6–10 ppm depending on water temperature).
Water Velocity and Flow Regimes :
Low Velocity / Stagnant Regime (< 3 ft/s / 0.9 m/s) : Suspended silt, sediment, organic matter, and calcium carbonate precipitants settle out of the water column onto horizontal exchanger tube surfaces. These accumulations establish differential aeration concentration cells where the shielded steel beneath the deposit becomes anodic and pits aggressively, often exacerbated by anaerobic microbial colonies (MIC).
Optimal Design Velocity (3 to 8 ft/s / 0.9 to 2.4 m/s) : Maintains suspended solids in dynamic suspension and ensures uniform distribution of chemical corrosion inhibitors to the metal surface.
High Velocity / Erosion-Corrosion Regime (> 8 to 10 ft/s / 2.4 to 3.0 m/s for carbon steel; > 4 to 6 ft/s for copper alloys) : High shear forces strip protective passive films and corrosion inhibitor complexes, causing rapid impingement and erosion-corrosion, especially at tube inlet ends and U-bends.
Water Chemistry and Mineral Saturation Indices :
Langelier Saturation Index (LSI) : Evaluates the equilibrium of calcium carbonate ( CaCO 3 \text{CaCO}_3 CaCO 3 ) dissolution versus precipitation: LSI = pH − pH s \text{LSI} = \text{pH} - \text{pH}_s LSI = pH − pH s (where pH s \text{pH}_s pH s is the saturation pH for CaCO 3 \text{CaCO}_3 CaCO 3 based on calcium hardness, total alkalinity, dissolved solids, and temperature).
LSI > 0 : Water is supersaturated with CaCO 3 \text{CaCO}_3 CaCO 3 ; tendency to precipitate scale. While a thin scale film can provide mild corrosion protection, excessive scale insulates heat transfer surfaces.
LSI = 0 : Chemical equilibrium.
LSI < 0 : Water is undersaturated; tendency to dissolve protective CaCO 3 \text{CaCO}_3 CaCO 3 scale, resulting in aggressive corrosion of bare metal.
Ryznar Stability Index (RSI) : Empirical index providing improved correlation with actual operating scale behavior: RSI = 2 ( pH s ) − pH \text{RSI} = 2(\text{pH}_s) - \text{pH} RSI = 2 ( pH s ) − pH
RSI < 6.0 : Scaling tendency increases.
RSI 6.0 to 7.0 : Stable water, minimal scaling or corrosion.
RSI 7.0 to 8.0 : Corrosive water; scale dissolved.
RSI > 8.0 : Extremely aggressive, highly corrosive water.
- Index Parameter Heavy Scaling Tendency Stable / Balanced Corrosive Tendency Extremely Corrosive
- Langelier Saturation Index (LSI) > +2.0 +0.5 to +1.0 0.0 to -1.0 < -2.0
- Ryznar Stability Index (RSI) < 5.5 6.0 to 7.0 7.5 to 8.5 > 9.0
- RP 571 Temperature and Scaling Notes
Corrosion rates increase with cooling water temperature, and outlet temperatures drive scaling.
RP 571 notes that process-side temperatures above about 140 °F (60 °C) create a scaling potential with fresh water, and brackish or salt water outlet temperatures above about 115 °F (46 °C) may cause serious scaling.
Velocities that are too low allow fouling, sedimentation, and under-deposit corrosion; velocities that are too high cause erosion-corrosion, with the limits depending on tube material and water quality.
Morphology of Cooling Water Attack
Carbon steel displays rough, uneven wall loss and deep, irregular underdeposit pitting covered by soft silt or carbonate mounds.
Copper alloys exhibit horseshoe-shaped inlet pits or localized reddish, spongy copper deposits resulting from dezincification of brasses.
Austenitic stainless steels develop pinpoint crevice pits beneath mineral deposits or transgranular branching cracks under high-temperature conditions.
Chemical Mitigation and Inspection
Chemical Water Treatment Programs : Incorporate scale inhibitors (phosphonates, polyacrylates), corrosion inhibitors (orthophosphates to form protective iron phosphate films, zinc salts, tolyltriazole for copper alloys), and biocides (oxidizing agents like chlorine, bleach, or chlorine dioxide; non-oxidizing biocides like glutaraldehyde and isothiazolinones) to suppress biological slime and MIC.
Inspection Methods : Standard NDE includes Eddy Current Testing (ECT) for non-ferromagnetic exchanger tubing (brass, stainless, titanium), Internal Rotary Inspection System (IRIS) or Remote Field Eddy Current (RFET) for ferromagnetic carbon steel tubes, and split-tube destructive failure analysis to measure deposit weight density (DWD).
Boiler Water and Steam Condensate Corrosion (API RP 571 Section 3.9)
Steam generation equipment, including utility water-tube boilers, waste heat boilers, economizers, steam drums, and steam condensate return piping, is vulnerable to three distinct, high-consequence water-side damage mechanisms:
1. Dissolved Oxygen Pitting
Affected Locations : Economizer coils, boiler feedwater piping, and deaerator storage vessels.
Mechanism : Cold water carries substantial dissolved oxygen. When feedwater is pumped into high-temperature economizers without proper deaeration, the oxygen rapidly reacts with bare carbon steel at micro-cathodes, driving intense localized anodic dissolution.
Morphology : Deep, sharp-edged, hemispherical pits. Each pit is typically covered by a distinctive, brittle reddish-orange or black iron oxide mound called a tubercle .
Critical Operating Target : High-pressure boiler operation requires mechanical deaeration (spray-tray deaerators operating under positive steam pressure) to strip dissolved oxygen down to less than 7 parts per billion (ppb / 0.007 ppm) , followed by chemical oxygen scavengers to consume all remaining trace oxygen to 0 ppb.
2. Carbonic Acid (CO₂) Condensate Grooving
Affected Locations : Steam condensate return piping, reboiler steam traps, condensate collection tanks, and tracing returns.
Chemical Origin : Boiler feedwater naturally contains dissolved carbonate ( CO 3 2 − \text{CO}_3^{2-} CO 3 2 − ) and bicarbonate ( HCO 3 − \text{HCO}_3^- HCO 3 − ) alkalinity. Under high temperatures and pressures in the steam drum, these species thermally decompose, liberating gaseous carbon dioxide ( CO 2 \text{CO}_2 CO 2 ): 2 HCO 3 − → Δ CO 3 2 − + H 2 O + CO 2 ↑ 2\text{HCO}_3^- \xrightarrow{\Delta} \text{CO}_3^{2-} + \text{H}_2\text{O} + \text{CO}_2 \uparrow 2 HCO 3 − Δ CO 3 2 − + H 2 O + CO 2 ↑ CO 3 2 − + H 2 O → Δ 2 OH − + CO 2 ↑ \text{CO}_3^{2-} + \text{H}_2\text{O} \xrightarrow{\Delta} 2\text{OH}^- + \text{CO}_2 \uparrow CO 3 2 − + H 2 O Δ 2 OH − + CO 2 ↑
Gaseous CO 2 \text{CO}_2 CO 2 vaporizes and travels harmlessly with the dry steam into process headers and heat exchangers. However, as the steam transfers heat and condenses into liquid condensate, the CO 2 \text{CO}_2 CO 2 gas dissolves into the condensate, forming carbonic acid ( H 2 CO 3 \text{H}_2\text{CO}_3 H 2 CO 3 ): CO 2 + H 2 O ⇌ H 2 CO 3 ⇌ H + + HCO 3 − \text{CO}_2 + \text{H}_2\text{O} \rightleftharpoons \text{H}_2\text{CO}_3 \rightleftharpoons \text{H}^+ + \text{HCO}_3^- CO 2 + H 2 O ⇌ H 2 CO 3 ⇌ H + + HCO 3 −
Carbonic acid depresses condensate pH to 4.5–5.5. The acidic water rapidly dissolves the protective iron oxide film, attacking the steel: Fe + 2 H 2 CO 3 → Fe(HCO 3 ) 2 + H 2 \text{Fe} + 2\text{H}_2\text{CO}_3 \rightarrow \text{Fe(HCO}_3)_2 + \text{H}_2 Fe + 2 H 2 CO 3 → Fe(HCO 3 ) 2 + H 2 .
Morphology : Distinctive smooth, sharp-edged longitudinal grooving or channeling along the bottom (invert) of horizontal condensate lines where the acidic stream flows. Threaded connections and elbows experience accelerated localized thinning.
3. Caustic Gouging (Caustic Corrosion)
Affected Locations : High-heat-flux boiling zones in generating tubes, furnace water-wall tubes, and tilted boiling tubes where internal deposits exist.
Mechanism : Occurs when alkaline boiler water treatments containing sodium hydroxide ( NaOH \text{NaOH} NaOH ) or coordinated sodium phosphates concentrate locally beneath porous internal magnetite deposits or in regions undergoing Departure from Nucleate Boiling (DNB). Liquid boiler water wicks through the porous deposit to the tube surface, where high heat flux flashes water into steam. The steam escapes through chimneys in the deposit, leaving non-volatile NaOH \text{NaOH} NaOH behind. The localized caustic concentration can rise from a normal bulk level of a few parts per million to 10% to 40% (100,000 to 400,000 ppm) .
At these extreme concentrations, concentrated caustic dissolves the normally protective magnetite layer as soluble sodium ferrate: Fe 3 O 4 + 4 NaOH → 2 NaFeO 2 + Na 2 FeO 2 + 2 H 2 O \text{Fe}_3\text{O}_4 + 4\text{NaOH} \rightarrow 2\text{NaFeO}_2 + \text{Na}_2\text{FeO}_2 + 2\text{H}_2\text{O} Fe 3 O 4 + 4 NaOH → 2 NaFeO 2 + Na 2 FeO 2 + 2 H 2 O
Morphology : Broad, irregular, smooth-bottomed gouges or horseshoe depressions beneath thick deposits, often displaying a clean, white-etched steel appearance under microscopic analysis, with no structural deformation prior to rupture.
Boiler Water Treatment and Mitigation
Oxygen Scavenging : Injecting chemical scavengers at the deaerator drop leg:
Sodium Sulfite ( Na 2 SO 3 \text{Na}_2\text{SO}_3 Na 2 SO 3 ) : Widely used in industrial boilers operating below 900–1000 psi. At higher pressures, sulfite decomposes into corrosive SO 2 \text{SO}_2 SO 2 and H 2 S \text{H}_2\text{S} H 2 S .
Volatile Scavengers : Hydrazine ( N 2 H 4 \text{N}_2\text{H}_4 N 2 H 4 ), carbohydrazide, or diethylhydroxylamine (DEHA) for high-pressure utility boilers, which leave no dissolved solids in the boiler water.
Condensate Protection via Amines :
Neutralizing Amines (morpholine, cyclohexylamine, diethylaminoethanol [DEAE]): Volatilize with steam and dissolve into condensing droplets to neutralize carbonic acid, elevating condensate pH to 8.5–9.2.
Filming Amines (octadecylamine): Form a protective, continuous monomolecular hydrophobic organic film across the steel surface, physically barring acidic condensate from contact.
Coordinated Phosphate Chemistry : Coordinated or congruent sodium phosphate treatments maintain an exact Na:PO 4 \text{Na:PO}_4 Na:PO 4 molar ratio (typically 2.2:1 to 2.8:1) to buffer boiler water pH, preventing the generation of free caustic ( NaOH \text{NaOH} NaOH ) beneath internal deposits.
Inspection Methods : Profile Radiography (PRT) of condensate line bottom inverts, straight-beam ultrasonic thickness grid mapping of economizer bends, and internal videoprobe fiberscope inspection of generating tubes.
- Oxygenated Process Water Corrosion (API RP 571 Section 3.49)
- Description and Mechanism
Oxygenated process water corrosion occurs when carbon and low-alloy steel process equipment carrying process water (such as sour water, stripped sour water, desalter effluent, hydroprocessor wash water, or stripped steam condensate) is inadvertently contaminated with dissolved oxygen.
Under normal refining operations, process water streams are completely anaerobic and contain dissolved hydrogen sulfide ( H 2 S \text{H}_2\text{S} H 2 S ), establishing a protective, passivating iron sulfide ( FeS \text{FeS} FeS ) scale on the pipe surface. However, when oxygen is inadvertently introduced through unblanketed atmospheric surge tanks, leaking pump suction seals, vacuum column operations, or utility water makeup cross-connections, the dissolved oxygen acts as a powerful depolarizing agent:
Oxygen destabilizes and oxidizes protective iron sulfide films, converting adherent FeS \text{FeS} FeS into elemental sulfur and acidic iron hydroxides.
Oxygen creates intense differential aeration cells beneath porous sulfide and sludge deposits.
Even modest dissolved oxygen contamination can raise corrosion rates dramatically compared with oxygen-free process water at the same temperature and pH, because oxygen becomes the dominant cathodic reactant.
Morphology, Mitigation, and Materials
Morphology : Severe, irregular localized pitting under reddish/black oxide-sulfide deposits, broad cratering, and rapid wall loss.
Mitigation Strategies :
Installing closed nitrogen gas blanketing systems on all process water surge vessels, skim tanks, and balance drums to prevent atmospheric air contact.
Eliminating suction-side pump seal ingress and inspecting vacuum system flanges.
Installing oxygen-stripping fuel gas or nitrogen columns for water makeup streams.
Material Upgrades : Where dissolved oxygen cannot be reliably excluded in warm process water, carbon steel piping is upgraded to 300-series austenitic stainless steels (304L/316L) or duplex stainless steels (2205) , provided operating temperatures remain below ECSCC limits.