Study guide

5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion

API 571 Corrosion and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals

1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology

2 Chapter 2: Atmospheric, Water & Soil Corrosion

2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion

3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss

3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation

4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion

4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion

5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems

5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)

6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services

6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion

7 Chapter 7: High-Temperature Oxidation & Sulfidation

7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)

8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions

8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion

9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture

9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating

10 Chapter 10: Wet H2S Cracking Mechanisms

10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)

11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking

11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

12 Chapter 12: Environmental Cracking in Chemical & Refining Services

12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC

13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue

13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue

14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation

14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons

15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure

15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging

16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking

16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)

17 Chapter 17: Environmental Embrittlement & Specialized Hydriding

17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding

5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion

Key Takeaways Explain This Topic AI

Hydrochloric acid (HCl) corrosion in refinery crude atmospheric overhead systems originates from the thermal hydrolysis of magnesium chloride (MgCl2 at >250 °F / 121 °C) and calcium chloride (CaCl2 at >350 °F / 177 °C) in crude preheat furnaces, whereas sodium chloride (NaCl) remains non-hydrolyzed.

At the water dew point (typically 200 °F to 240 °F / 93 °C to 116 °C), the initial condensing water droplet absorbs highly soluble HCl gas with extreme thermodynamic affinity, plunging local pH to 1.0–2.0 and producing catastrophic carbon steel thinning rates exceeding 100 to 500 mils/year.

300-series austenitic stainless steels are strictly prohibited in wet overhead HCl condensing zones due to rapid pitting, crevice attack, and catastrophic transgranular chloride stress corrosion cracking (Cl- SCC); titanium Grade 2/7 and nickel alloys (Alloy C-276, Alloy B-2) provide superior resistance.

Primary control of overhead HCl corrosion requires a multi-barrier defense: high-efficiency desalting (<1.0 to 2.0 ptb salt), controlled dilute caustic injection (1 to 3 wt% NaOH) into desalted crude, continuous upstream slipstream water washing, and neutralizing/filming amine injection maintaining boot water pH between 5.5 and 6.5.

Phenol (carbolic acid) corrosion (API RP 571 Section 3.50) attacks carbon and low-alloy steels in lube oil extraction and chemical recovery units, especially at higher temperature with water and high velocity; Type 304L or 316L stainless steel provides excellent resistance.

Last updated: September 2026

Acidic Aqueous and Organic Degradation in Refining

Crude oil distillation, petrochemical intermediate synthesis, and lube oil extraction expose metallic infrastructure to severe acidic operating environments. While process streams are frequently non-corrosive under dry, single-phase hydrocarbon conditions, the presence of trace moisture, thermal decomposition, and phase changes create highly corrosive aqueous electrolyte films.

This section examines two critical mechanisms defined in API RP 571:

Hydrochloric Acid (HCl) Corrosion (API RP 571 Section 3.37) : Rapid aqueous acid thinning and pitting in atmospheric crude tower overhead systems, hydroprocessing units, catalytic reforming chloride treaters, and isomerization units.

Phenol (Carbolic Acid) Corrosion (API RP 571 Section 3.50) : Uniform and flow-induced degradation of carbon steel and alloys in lube oil solvent extraction units and chemical recovery systems.

Understanding the precise physical chemistry of salt hydrolysis, condensation dew point thermodynamics, and metallurgy limitations is crucial for process plant integrity management.

  • Hydrochloric Acid (HCl) Corrosion (API RP 571 Section 3.37)
  • Description and Chemical Origin

Hydrochloric acid corrosion is an extremely aggressive form of aqueous chemical attack affecting carbon steels, low-alloy steels, copper alloys, and stainless steels. While aqueous HCl \text{HCl} HCl is widely utilized for industrial chemical cleaning and regeneration, in petroleum refining it forms as an unintentional, highly destructive byproduct in atmospheric distillation crude tower overhead circuits .

Raw crude oil extracted from geological formations contains emulsified formation brine rich in inorganic chloride salts:

Sodium Chloride ( NaCl \text{NaCl} NaCl ) : Typically represents 75% to 85% of total salts.

Magnesium Chloride ( MgCl 2 \text{MgCl}_2 MgCl 2 ​ ) : Typically 10% to 15% of total salts.

Calcium Chloride ( CaCl 2 \text{CaCl}_2 CaCl 2 ​ ) : Typically 5% to 10% of total salts.

As desalted crude oil passes through the preheat exchanger train and atmospheric pipestill furnace coils (where temperatures reach 650 °F to 750 °F / 343 °C to 399 °C), the alkaline earth salts undergo thermal hydrolysis in the presence of residual emulsified water: MgCl 2 + 2 H 2 O → > 250 – 280 ∘ F ( 121 – 138 ∘ C ) Mg(OH) 2 + 2 HCl (g) \text{MgCl}_2 + 2\text{H}_2\text{O} \xrightarrow{>250\text{--}280\text{ }^\circ\text{F } (121\text{--}138\text{ }^\circ\text{C})} \text{Mg(OH)}_2 + 2\text{HCl}\text{ (g)} MgCl 2 ​ + 2 H 2 ​ O > 250 – 280 ∘ F ( 121 – 138 ∘ C ) ​ Mg(OH) 2 ​ + 2 HCl (g) CaCl 2 + 2 H 2 O → > 350 – 400 ∘ F ( 177 – 204 ∘ C ) Ca(OH) 2 + 2 HCl (g) \text{CaCl}_2 + 2\text{H}_2\text{O} \xrightarrow{>350\text{--}400\text{ }^\circ\text{F } (177\text{--}204\text{ }^\circ\text{C})} \text{Ca(OH)}_2 + 2\text{HCl}\text{ (g)} CaCl 2 ​ + 2 H 2 ​ O > 350 – 400 ∘ F ( 177 – 204 ∘ C ) ​ Ca(OH) 2 ​ + 2 HCl (g)

Importantly, sodium chloride ( NaCl \text{NaCl} NaCl ) is thermally stable up to approximately 950 °F (510 °C) and does not hydrolyze to any significant degree under crude distillation furnace conditions. Thus, the thermal decomposition of MgCl 2 \text{MgCl}_2 MgCl 2 ​ and CaCl 2 \text{CaCl}_2 CaCl 2 ​ generates virtually all volatile hydrogen chloride ( HCl \text{HCl} HCl ) gas.

The Initial Water Dew Point Phenomenon

The generated anhydrous HCl \text{HCl} HCl gas flashes out of the crude oil in the flash zone and travels upward through the atmospheric fractionation column along with hydrocarbon vapors and process stripping steam, exiting via the overhead vapor line at 210 °F to 260 °F (99 °C to 127 °C).

In the dry vapor phase above the water dew point, gaseous HCl \text{HCl} HCl is completely non-corrosive to carbon steel. However, as the overhead vapor stream cools through heat exchangers, air-fin coolers, and condenser bundles, it reaches the water dew point (typically 200 °F to 240 °F / 93 °C to 116 °C , depending on operating pressure and steam partial pressure):

Extreme Solubility and Acid Concentration : Hydrogen chloride gas possesses an enormous thermodynamic affinity for liquid water (Henry's law constant). The very first microscopic droplet of water that condenses on the pipe wall or condenser tube absorbs almost all surrounding HCl \text{HCl} HCl gas instantly.

Runaway Low pH : Instead of forming a dilute solution, this initial condensate forms concentrated hydrochloric acid with an instantaneous pH between 1.0 and 2.0 (and occasionally <0.5) .

Catastrophic Metal Dissolution : In this unneutralized, hot, highly conductive electrolyte, carbon steel dissolves rapidly via hydrogen-evolution acid corrosion: Fe + 2 HCl → FeCl 2 + H 2 \text{Fe} + 2\text{HCl} \rightarrow \text{FeCl}_2 + \text{H}_2 Fe + 2 HCl → FeCl 2 ​ + H 2 ​

Corrosion rates on bare carbon steel under initial dew-point droplets routinely exceed 100 to 500+ mils/year (2.5 to 12.7 mm/yr) , causing through-wall perforation within weeks if unmitigated. Hydrocarbon Vapors + Steam + HCl (g) [Dry, Non-Corrosive]

  • ═══════════════════════════════════════════════════════════════
  • │
  • ▼ Cooling to Dew Point (200°F - 240°F)
  • ┌─────────────────────────────────────────────────────────────┐
  • │ Initial Water Condensation Droplet Forms │
  • │ HCl Gas Dissolves Instantly (Extreme Thermodynamic Draw) │
  • │ Aqueous Droplet pH Drops to 1.0 - 2.0 │
  • └─────────────────────────────────────────────────────────────┘
  • │
  • ▼ Metal Dissolution
  • Bare Carbon Steel Wall: Active Dissolution >100 - 500 mpy
  • Austenitic Stainless: Catastrophic Pitting & Transgranular Cl- SCC
  • Susceptible Materials and Metallurgy Limitations

Key API RP 571 statements: carbon steel and low alloy steels suffer excessive corrosion when exposed to any concentration of HCl that produces a pH below about 4.5 ; 300 series and 400 series SS are not usefully resistant to any concentration of HCl; Alloy 400, titanium, and some other nickel alloys have good resistance to dilute HCl in many refinery applications; and oxidizing agents (oxygen, ferric ions, cupric ions) increase the corrosion rate, particularly for Alloy 400 and Alloy B-2.

Carbon Steel and Low-Alloy Steels :

Highly susceptible to rapid uniform thinning, localized grooving, and under-deposit corrosion beneath condensed ammonium/amine chloride salts.

300-Series Austenitic Stainless Steels (Type 304, 304L, 316, 316L) :

Strictly Prohibited in Wet Crude Overhead Systems : Austenitic stainless steels rely on a passive chromium oxide ( Cr 2 O 3 \text{Cr}_2\text{O}_3 Cr 2 ​ O 3 ​ ) film. Aqueous chlorides and low pH instantly destroy this film, causing rapid pitting and crevice corrosion. Furthermore, under operating temperatures (>140 °F / 60 °C) and residual welding or mechanical stresses, 300-series stainless steels experience catastrophic transgranular chloride stress corrosion cracking (Cl- SCC) .

Copper Alloys (Admiralty Brass C44300, 90-10 Cu-Ni C70600, 70-30 Cu-Ni C71500) :

Historically utilized for crude overhead condenser tube bundles because they resist neutral chloride brines.

Severe Limitations : Highly susceptible to rapid attack if condensate pH drops below 6.0. Furthermore, copper alloys suffer accelerated complexation corrosion if oxygen is present, or if ammonia / ammonium salts are introduced via neutralizer injection.

Titanium (Grade 2 Commercially Pure, Grade 7/12 with Palladium/Ruthenium) :

Forms an exceptionally tough, protective rutile ( TiO 2 \text{TiO}_2 TiO 2 ​ ) barrier oxide film. Titanium Grade 2 is the premier industry standard for crude overhead condenser tubes and finned tubes, exhibiting complete immunity to wet HCl \text{HCl} HCl condensate across standard overhead temperatures.

Caution : API RP 571 notes that titanium performs well in oxidizing conditions but fails rapidly in dry HCl service . Trace fluorides also attack its TiO 2 \text{TiO}_2 TiO 2 ​ film.

Nickel-Base Alloys :

Alloy C-276 (UNS N10276) : Contains 16% molybdenum and 16% chromium, providing exceptional resistance to both oxidizing and reducing hydrochloric acid mixtures.

Alloy B-2 / B-3 (UNS N10665 / N10675) : High-molybdenum (28% Mo) nickel alloys offering outstanding resistance to pure, non-oxidizing HCl \text{HCl} HCl at all concentrations and temperatures up to the atmospheric boiling point.

Alloy 400 (Monel / UNS N04400) : Good resistance to dilute, non-aerated aqueous HCl \text{HCl} HCl , but RP 571 warns that oxygen and ferric or cupric ions increase its corrosion rate.

Multi-Barrier Mitigation Architecture

Refinery crude overhead systems employ an integrated, multi-layered defense strategy:

High-Efficiency Crude Desalting :

The primary defense. Crude oil is washed with 3% to 8% fresh water and passed through two-stage electrostatic desalters.

Target Residual Salt : Desalters must achieve a treated crude salt content of < 1.0 to 2.0 pounds per thousand barrels (ptb) (approximately 3 to 6 ppm chloride equivalent). Desalter brine pH and electrical grid voltage are continuously optimized to maximize MgCl 2 \text{MgCl}_2 MgCl 2 ​ and CaCl 2 \text{CaCl}_2 CaCl 2 ​ extraction.

Controlled Caustic Injection :

Dilute sodium hydroxide ( NaOH \text{NaOH} NaOH , 1.0 to 3.0 wt%, typically 1° to 3° Baumé) is continuously metered into the desalted crude stream downstream of the desalter: MgCl 2 + 2 NaOH → Mg(OH) 2 ↓ + 2 NaCl \text{MgCl}_2 + 2\text{NaOH} \rightarrow \text{Mg(OH)}_2\downarrow + 2\text{NaCl} MgCl 2 ​ + 2 NaOH → Mg(OH) 2 ​ ↓ + 2 NaCl CaCl 2 + 2 NaOH → Ca(OH) 2 ↓ + 2 NaCl \text{CaCl}_2 + 2\text{NaOH} \rightarrow \text{Ca(OH)}_2\downarrow + 2\text{NaCl} CaCl 2 ​ + 2 NaOH → Ca(OH) 2 ​ ↓ + 2 NaCl

Because NaCl \text{NaCl} NaCl does not thermally hydrolyze in the furnace, caustic converts volatile acid precursors into non-volatile salts that pass safely out the bottom of the column in the atmospheric residuum.

Strict Operational Control : Caustic dosage must be carefully limited to < 1.5 to 3.0 ptb equivalent NaOH \text{NaOH} NaOH . Over-injection causes furnace tube coking, preheat exchanger fouling, sodium contamination of catalytic cracker feeds, and severe caustic corrosion / caustic embrittlement in furnace tubes.

Continuous Overhead Slipstream Water Wash :

Injected continuously into the overhead vapor line upstream of the initial water dew point .

The wash water (typically stripped sour water condensate or deaerated boiler feedwater) is injected at 5% to 10% of total overhead vapor rate .

Mechanism : Provides an immediate, massive volume of water that instantly dilutes condensing acid to a non-corrosive concentration and washes away deposited ammonium chloride ( NH 4 Cl \text{NH}_4\text{Cl} NH 4 ​ Cl ) salts before under-deposit corrosion can initiate. Complete water vaporization must be avoided.

Neutralizing Amines and Filming Inhibitors :

Neutralizers : Specialty neutralizing amines (or aqueous ammonia) are injected into the overhead vapor line to react with HCl \text{HCl} HCl , buffering accumulator boot water to an optimal target pH of 5.5 to 6.5 (or 6.0 to 7.0 if copper alloys are present).

If pH drops < 5.0 : Runaway hydrochloric acid corrosion occurs.

If pH exceeds > 7.5 : Amine over-injection leads to amine hydrochloride salt deposition, triggering severe under-deposit corrosion and ammonium bisulfide fouling.

Filming Amines : Long-chain aliphatic filming inhibitors are continuously dosed to establish a microscopic, hydrophobic barrier film on internal metal surfaces.

Morphology of HCl Attack

Uniform Thinning : Broad, smooth wall loss along the bottom and sides of overhead vapor piping.

Grooving and Impingement Washout : Deep, smooth-bottomed flow grooves immediately downstream of water wash injection quills, piping elbows, and condenser inlet nozzles.

Under-Deposit Pitting : Deep, localized pits beneath crusty salt cakes formed by unwashed amine hydrochlorides.

Inspection and NDE Techniques

Profile Radiography (PRT) : Primary NDE method for identifying internal wall thinning, flow grooving, and step-changes at piping elbows, reducer transitions, and thermowell nozzles without insulation stripping.

Ultrasonic Thickness Testing (UT) : Automated UT scanning (AUT) and continuous high-temperature UT monitoring probes installed on overhead vapor lines and condenser inlets.

Boot Water Analytical Monitoring : Continuous online pH probes and daily laboratory sampling of atmospheric accumulator boot water tracking pH, total chlorides (target <20 to 50 ppm), and dissolved iron (spikes indicate active acid attack).

  • Phenol (Carbolic Acid) Corrosion (API RP 571 Section 3.50)
  • Description and Mechanism

Phenol (carbolic acid, C 6 H 5 OH \text{C}_6\text{H}_5\text{OH} C 6 ​ H 5 ​ OH ) is a weak organic aromatic acid utilized extensively in refining lube oil solvent extraction plants (to selectively extract aromatic hydrocarbons from lubricating oil base stocks) and in chemical manufacturing (bisphenol-A, phenolic resins, and caprolactam synthesis).

Under completely anhydrous conditions and moderate temperatures, molten phenol is relatively non-corrosive to carbon steel. However, at elevated process temperatures, and particularly when contaminated with water or trace organic acids, phenol becomes highly aggressive to carbon steel and low-alloy steels.

Metallic iron reacts with hot phenol to produce iron phenolate and gaseous hydrogen: Fe + 2 C 6 H 5 OH → Fe(C 6 H 5 O) 2 + H 2 \text{Fe} + 2\text{C}_6\text{H}_5\text{OH} \rightarrow \text{Fe(C}_6\text{H}_5\text{O)}_2 + \text{H}_2 Fe + 2 C 6 ​ H 5 ​ OH → Fe(C 6 ​ H 5 ​ O) 2 ​ + H 2 ​

The resulting iron phenolate scale is weakly adherent, porous, and easily removed by flowing fluid.

Critical Factors Influencing Phenol Corrosion

Operating Temperature :

Temperature is the dominant process accelerator:

Below 200 °F (93 °C) : Corrosion rates on carbon steel in dry phenol are negligible (<1 to 2 mils/year).

Between 200 °F and 250 °F (93 °C to 121 °C) : Corrosion rates begin to increase noticeably.

Above 250 °F (121 °C) : Carbon steel corrosion rates accelerate exponentially.

Above 400 °F (204 °C) (such as in phenol recovery flash towers and extract furnace tubes), carbon steel experiences severe, unacceptable thinning rates exceeding 50 to 100+ mils/year.

Water and Moisture Content :

Pure phenol has an atmospheric boiling point of 360 °F (182 °C). When water is introduced, phenol and water form azeotropic mixtures.

Aqueous Phenol Corrosivity : Solutions containing 5% to 15% water are vastly more corrosive than pure phenol. Water promotes ionization of the phenolic hydroxyl group (producing hydronium and phenolate ions) and prevents the formation of any semi-protective organic film.

Organic Acid and Inorganic Contaminants :

Trace carboxylic acids (formic acid, acetic acid) and inorganic chlorides act as aggressive catalytic accelerators, destabilizing protective passive films and lowering solution pH.

Fluid Velocity and Mechanical Shear :

In areas of high fluid shear, turbulence, or impingement, weakly adherent iron phenolate films are sheared off, exposing fresh steel to continuous rapid attack.

Affected Equipment and Units

Lube Oil Phenol Extraction Units : Phenol recovery towers, extract flash strippers, extract mix preheat exchangers, furnace tubes, phenol storage tanks, and solvent dehydrator columns.

Bisphenol-A (BPA) and Resin Plants : Reaction vessels, distillation columns, reboiler bundles, and overhead condensers.

Piping and Pumps : Phenol charge pump casings, high-velocity transfer piping, control valves, and orifice plates.

Morphology of Phenol Attack

General Thinning : Uniform wall loss across vessel shells, column trays, and piping runs operating above 250 °F.

Localized Flow Gouging : Deep, smooth, scallop-shaped depressions and grooving in high-velocity pump impellers, piping elbows, and reboiler tube inlets.

Prevention and Mitigation Strategies

Metallurgical Upgrades :

300-Series Austenitic Stainless Steel (Type 304L and 316L) : Provides excellent resistance to phenol corrosion and is the usual upgrade for recovery-section equipment; higher alloys (for example, Alloy C-276) are used where velocity, turbulence, or temperature is severe.

Austenitic stainless steels form a durable chromium oxide film that remains impervious to phenolate formation. Standard industry practice specifies solid 304L/316L or 316L roll-bonded cladding for phenol recovery towers, furnace tubes, heat exchanger bundles, and transfer piping operating above 250 °F (121 °C).

Moisture Control and Dehydration :

Operating solvent recovery stripping systems efficiently to minimize water accumulation in circulating phenol loops; maintaining water content below 1.0 wt% where carbon steel must be retained.

Fluid Velocity Management :

Limiting carbon steel piping flow velocities below 3.0 to 5.0 ft/s in moderate-temperature circuits.

Inspection and NDE Techniques

Ultrasonic Thickness Testing (UT) : Compression wave straight-beam UT and grid mapping on extraction column shells, recovery reboilers, and transfer lines.

Internal Visual Testing (VT) : Turnaround visual inspection of column internals, trays, downcomers, and nozzle attachments to detect localized thinning or detachment of internal cladding.

Solvent Quality Sampling : Routine laboratory titration measuring water content, total acid number (TAN), and dissolved iron concentration in circulating solvent.

Loading diagram... Crude Unit Atmospheric Overhead HCl Generation, Dew Point, and Multi-Barrier Defense Architecture