Study guide

7.2 Sulfidation in H2-Free Environments

API 571 Corrosion and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals

1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology

2 Chapter 2: Atmospheric, Water & Soil Corrosion

2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion

3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss

3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation

4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion

4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion

5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems

5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)

6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services

6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion

7 Chapter 7: High-Temperature Oxidation & Sulfidation

7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)

8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions

8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion

9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture

9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating

10 Chapter 10: Wet H2S Cracking Mechanisms

10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)

11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking

11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

12 Chapter 12: Environmental Cracking in Chemical & Refining Services

12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC

13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue

13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue

14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation

14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons

15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure

15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging

16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking

16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)

17 Chapter 17: Environmental Embrittlement & Specialized Hydriding

17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding

7.2 Sulfidation in H2-Free Environments

Key Takeaways Explain This Topic AI

High-temperature sulfidation in hydrogen-free (H2-free) hydrocarbon streams occurs at process temperatures above 500 °F (260 °C), with corrosion rates escalating sharply above 550 °F (288 °C) up to approximately 800 °F (427 °C).

Corrosivity in H2-free hydrocarbon environments is dictated strictly by reactive sulfur species (elemental sulfur, aliphatic mercaptans, sulfides, disulfides, polysulfides) rather than total sulfur, because thermally stable ring sulfur (thiophenes, benzothiophenes) does not react in the absence of hydrogen.

Carbon steel containing low silicon (< 0.10 wt% Si) can corrode significantly faster than silicon-killed carbon steel, a failure factor highlighted in API RP 939-C and in the 2012 Chevron Richmond crude unit fire.

Modified McConomy curves show sulfidation resistance increasing with chromium content (5Cr and 9Cr are common upgrades), while 300 series stainless steels (18Cr-8Ni) are highly resistant.

Damage morphology manifests as multi-layered, porous, easily flaked black iron sulfide (FeS) scale accompanied by uniform, circumferential wall thinning around the full internal perimeter of piping and furnace coils.

Last updated: September 2026

7.2 Sulfidation in H2-Free Environments

Sulfidation (also designated as High-Temperature Sulfidic Corrosion ) in hydrogen-free ( H 2 \text{H}_2 H 2 ​ -free) hydrocarbon environments is the high-temperature chemical reaction between metallic iron, low-alloy steels, or stainless steels and naturally occurring sulfur compounds present in crude oil and refined fractions. Documented under API RP 571 Section 3.61 , sulfidation is one of the most prevalent and historically significant damage mechanisms in petroleum refineries.

Sulfidation operates across crude distillation units (CDUs), vacuum distillation units (VDUs), delayed cokers, visbreakers, and fluid catalytic cracking (FCC) recovery sections. The degradation occurs in hot, non-aqueous hydrocarbon liquids and vapors in the complete absence of hydrogen gas . In H 2 \text{H}_2 H 2 ​ -free systems, sulfidation initiates at temperatures above 500 °F (260 °C) and accelerates aggressively above 550 °F (288 °C) , resulting in uniform circumferential metal loss that can lead to catastrophic, full-bore piping rupture if remaining wall thickness is not meticulously managed. [ Hot Hydrocarbon Stream: H2-Free, T > 500 °F ]

  • Reactive Sulfur Compounds (Mercaptans, Disulfides, S8)
  • |
  • v
  • +-------------------------------------------------------------+
  • | Multi-Layer Iron Sulfide Scale (Pyrrhotite: Fe1-xS) |
  • | Porous, Friable, Black/Dark Gray, Easily Delaminates |
  • +-------------------------------------------------------------+
  • ^
  • | Fe2+ Cation Migration Outward
  • +-------------------------------------------------------------+
  • | Carbon Steel or Cr-Mo Low-Alloy Substrate |
  • | (Uniform Circumferential Wall Thinning) |
  • +-------------------------------------------------------------+
  • Chemical Reaction Mechanisms and Sulfide Scale Formation

Unlike aqueous corrosion, high-temperature sulfidation does not require liquid water or ionic electrolytes. It is a direct high-temperature heterogeneous gas/liquid-solid metallurgical reaction. Sulfur atoms react directly with the iron lattice to form iron sulfide (FeS) , predominantly in the crystallographic form of pyrrhotite ( Fe 1 − x S \text{Fe}_{1-x}\text{S} Fe 1 − x ​ S ) :

Direct Reaction with Reactive Elemental Sulfur: Fe + S ( reactive ) ⟶ FeS \text{Fe} + \text{S}_{(\text{reactive})} \longrightarrow \text{FeS} Fe + S ( reactive ) ​ ⟶ FeS

Reaction with Aliphatic Mercaptans (Thiols): Fe + R-SH ⟶ FeS + R-H \text{Fe} + \text{R-SH} \longrightarrow \text{FeS} + \text{R-H} Fe + R-SH ⟶ FeS + R-H

Reaction with Disulfides and Polysulfides: Fe + R-S-S-R ⟶ FeS + R-S-R \text{Fe} + \text{R-S-S-R} \longrightarrow \text{FeS} + \text{R-S-R} Fe + R-S-S-R ⟶ FeS + R-S-R

Pyrrhotite ( Fe 1 − x S \text{Fe}_{1-x}\text{S} Fe 1 − x ​ S ) is a metal-deficient, p-type semiconductor with substantial iron cation vacancies in its hexagonal lattice. The corrosion rate is controlled by the outward solid-state diffusion of ferrous cations ( Fe 2 + \text{Fe}^{2+} Fe 2 + ) through these vacancies toward the outer scale surface, where they combine with incoming sulfur species. Because the pyrrhotite scale is naturally porous, friable, and mechanically weak, it provides only partial diffusion resistance compared to oxide scales.

Reactive Sulfur vs. Total Sulfur: The Critical Chemical Distinction

A core, heavily emphasized concept in API RP 571 Section 3.61 is that Total Sulfur Content does NOT correlate directly with sulfidation corrosivity in H2-free environments .

Standard refinery laboratory assays measure Total Sulfur (via X-ray fluorescence per ASTM D4294 or combustion per ASTM D2622). Total sulfur captures every sulfur atom present in the oil, irrespective of its chemical bonding. However, organic sulfur compounds in crude oil fall into distinct chemical classifications with vastly different thermal stability and reactivity:

Sulfur Compound Family Typical Molecular Representatives Thermal Decomposition Temperature Corrosivity in H2-Free Service

Elemental Sulfur Dissolved S 8 \text{S}_8 S 8 ​ rings Active at > 300 °F (149 °C) Extremely Corrosive: Reacts directly and aggressively with steel.

Aliphatic Mercaptans Methyl, ethyl, butyl mercaptans ( R-SH \text{R-SH} R-SH ) Decompose at 450 °F to 600 °F (232 °C to 316 °C) Highly Corrosive: Readily cleave weak C-S bonds to release reactive sulfur.

Aliphatic Disulfides & Polysulfides Dimethyl disulfide, dialkyl polysulfides Decompose at 450 °F to 550 °F (232 °C to 288 °C) Highly Corrosive: S-S bonds have low bond dissociation energy (~250 kJ/mol).

Aliphatic Sulfides (Thioethers) Diethyl sulfide ( R-S-R’ \text{R-S-R'} R-S-R’ ) Decompose at 550 °F to 650 °F (288 °C to 343 °C) Moderately Corrosive: Moderately stable; cleave at elevated heater temperatures.

Thiophenes & Benzothiophenes Thiophene, benzothiophene, dibenzothiophene Thermally stable up to > 850 °F to 1000 °F (454 °C to 538 °C) Non-Reactive (Benign): Sulfur is locked inside aromatic ring resonance; cannot react with steel without hydrogen present.

The Heavy Crude Paradox

In heavy, sour crude oils (such as Canadian bitumen or Venezuelan extra-heavy crudes), total sulfur may exceed 3.0 wt% to 5.0 wt%. However, 70% to 85% of that sulfur is locked within polycyclic aromatic rings (dibenzothiophenes and alkyl-substituted benzothiophenes) . In an atmospheric crude tower operating at 680 °F without hydrogen, these ring structures remain intact and pass into the bottoms stream without corroding the steel.

Conversely, a lighter crude with only 0.8 wt% total sulfur that happens to be exceptionally rich in light aliphatic mercaptans and elemental sulfur will cause severe, rapid sulfidation attack. Therefore, assessing sulfidation risk based on total sulfur alone leads to dangerous design and operational errors.

Temperature Profile and Kinetics of H2-Free Sulfidation

High-temperature sulfidation in H 2 \text{H}_2 H 2 ​ -free environments is bounded by precise thermal thresholds:

Process Temperature Range Corrosion Kinetic Behavior & Metallurgy Response

Below 500 °F (< 260 °C) Kinetically Inactive: Diffusion of iron cations through the nascent sulfide lattice is too slow to cause measurable wall loss (< 1 mpy).

500 °F to 550 °F (260 °C to 288 °C) Activation Threshold: Sulfidation activates; corrosion rates on carbon steel typically range from 1 to 5 mpy.

550 °F to 750 °F (288 °C to 399 °C) Rapid Acceleration Zone: Peak exponential acceleration occurs. Reaction rates increase roughly doubling for every 50 °F (28 °C) increase in temperature. Typical carbon steel corrosion rates range from 10 to 50+ mpy depending on reactive sulfur concentration.

750 °F to 800 °F (399 °C to 427 °C) Maximum Severity Window: Maximum corrosion rates are recorded. Above 750 °F, thermal cracking of heavy hydrocarbons begins depositing protective coke scales on metal walls, while thermodynamic dissociation of iron sulfide starts to limit kinetics.

Above 800 °F (> 427 °C) Coking Regime & Scale Dissociation: Heavy coke deposition forms an insulating physical barrier on tube walls, often retarding further sulfidation metal loss, although localized attack can continue beneath coke deposits.

The McConomy and Modified McConomy Curves

To predict corrosion rates in H 2 \text{H}_2 H 2 ​ -free sulfidation service, the refining industry relies on the Modified McConomy Curves , originally developed by H.F. McConomy in 1963 and subsequently revised by API and NACE to reflect decades of empirical refinery operating data.

Structure of the Modified McConomy Correlation

The modified McConomy correlation establishes a baseline corrosion rate for carbon steel exposed to a crude hydrocarbon stream containing 0.6 wt% total sulfur , plotted as a function of temperature between 500 °F and 800 °F (260 °C and 427 °C). Corrosion Rate (mpy)

  • 60 | CS Baseline (0.6% S)
  • 50 | * * *
  • 40 | * * *
  • 30 | * * *
  • 20 | * * * [ 5Cr-0.5Mo: lower curve ]
  • 10 | * * * [ 9Cr-1Mo: lower still ]
  • 0 +--------------* * *-----------------------[ 300 SS: highly resistant]
  • 500°F 600°F 700°F 800°F
  • Temperature (°F)

To determine the actual predicted corrosion rate for a specific alloy and process stream, two adjustment factors are applied: Corrosion Rate = Base Rate ( Temp ) × F Sulfur × F Alloy \text{Corrosion Rate} = \text{Base Rate}_{(\text{Temp})} \times F_{\text{Sulfur}} \times F_{\text{Alloy}} Corrosion Rate = Base Rate ( Temp ) ​ × F Sulfur ​ × F Alloy ​

Sulfur Content Correction: Accounts for sulfur contents that differ from the curve's 0.6 wt% baseline, read from the companion sulfur-correction curve.

Alloy Curves: Separate curves show the lower rates of chromium-bearing alloys, from low-chromium steels through 12Cr and 18Cr-8Ni stainless steel.

Use the published curves (API RP 939-C and RP 571 reproduce them) for actual values; the numbers in this section are for orientation only.

Chromium Alloying Effects: The Progressive Resistance Pathway

In H 2 \text{H}_2 H 2 ​ -free sulfidation, adding chromium to steel stabilizes the crystal lattice by incorporating chromium into the sulfide scale, forming complex ( Fe,Cr ) x S y (\text{Fe,Cr})_x\text{S}_y ( Fe,Cr ) x ​ S y ​ spinel structures that drastically reduce cation vacancy concentration and cation mobility.

  • Alloy Metallurgy Nominal Chromium Relative resistance (modified McConomy curves) Notes
  • Carbon Steel ~0% Baseline Verify silicon; low-Si carbon steel (<0.10% Si) corrodes faster
  • C-0.5Mo ~0% Same as carbon steel Molybdenum adds creep strength, not sulfidation resistance
  • 1.25Cr to 2.25Cr 1.25% to 2.25% Modest improvement Usually selected for strength or creep
  • 5Cr-0.5Mo 5% Substantial improvement Common furnace-tube upgrade
  • 9Cr-1Mo 9% Further improvement Common upgrade for severe crude and vacuum service
  • 12Cr (400 series) 12% Much better Cladding, trays, internals
  • 300 Series SS ~18% Highly resistant Near-immune at typical crude and vacuum temperatures

API RP 571 states that resistance to sulfidation increases with chromium content and that 300 series SS are highly resistant. Read actual values from the curves rather than memorizing single multipliers.

Loading diagram... H2-Free Sulfidation: Chemical Drivers, Silicon Anomaly, and Metallurgical Upgrades

The Low-Silicon Carbon Steel Anomaly (API RP 571 & API 939-C)

One of the most critical safety alerts and heavily tested concepts in refinery inspection is the Silicon Effect in Carbon Steel , governed in detail by API Recommended Practice 939-C ( Guidelines for Avoiding Sulfidation Corrosion Failures in Oil Refineries ).

The Discovery and Mechanism of Low-Silicon Accelerated Attack

Historically, carbon steel pipe specifications (such as ASTM A53 Grade B or vintage ASTM A106 Grade B) did not mandate a strict minimum silicon content. In steelmaking, silicon is added primarily as a deoxidizer ("killing" agent) to remove dissolved oxygen prior to casting. Steels manufactured via semi-killed or rimmed practices often contained residual silicon levels below 0.10 wt% , sometimes as low as 0.01 wt% to 0.05 wt% .

Extensive laboratory investigations and catastrophic refinery failures (most notably the 2012 Chevron Richmond refinery crude unit fire, investigated by the U.S. Chemical Safety Board) established that:

Carbon steels with Si < 0.10 wt% can corrode significantly faster than silicon-killed carbon steels (typically 0.10 wt% Si or more) at identical temperatures and sulfur concentrations; reported multiples vary widely.

Mechanism: Silicon atoms segregate near the metal-scale interface, facilitating the development of a compact, highly adherent, iron silicate or silicon-enriched subscale. This barrier layer significantly restricts the outward diffusion of Fe 2 + \text{Fe}^{2+} Fe 2 + cations. In low-silicon steels, this subscale cannot form; the resulting pyrrhotite scale is extremely porous, poorly adhered, defect-rich, and prone to continuous micro-delamination, allowing unrestricted cation migration.

  • Affected Equipment, Damage Morphology, and Inspection Protocols
  • 1. High-Risk Refinery Locations

Crude Distillation Units (CDU): Atmospheric furnace radiant tubes, furnace crossover piping, atmospheric transfer line, atmospheric column flash zone internals, tower bottoms piping, and reduced crude heat exchanger circuits operating above 500 °F (260 °C).

Vacuum Distillation Units (VDU): Vacuum furnace fired tubes, vacuum transfer line (where naphthenic acid is not dominant), vacuum tower bottoms circuits, and pitch/resid pumps.

Delayed Coking Units (DCU): Coker furnace tubes, transfer lines to coke drums, and coker fractionator bottoms circuits.

Visbreaking Units: Visbreaker furnace coils, soaker drum piping, and residue transfer lines.

FCC Units: Heavy cycle oil (HCO) circuits, fractionator bottoms slurry pumparounds operating above 500 °F.

2. Physical and Metallurgical Appearance

Macroscopic Morphology: Metal loss manifests as uniform circumferential wall thinning around the entire 360-degree perimeter of the pipe. The metal surface is covered by a dense to friable, multi-layered, dull black or charcoal-gray iron sulfide ( FeS \text{FeS} FeS ) scale.

Pyrophoric Hazards During Outages: When iron sulfide scale is exposed to air (oxygen) during unit turnarounds, it undergoes an intense exothermic oxidation reaction: 4 FeS + 7 O 2 ⟶ 2 Fe 2 O 3 + 4 SO 2 + Heat 4\text{FeS} + 7\text{O}_2 \longrightarrow 2\text{Fe}_2\text{O}_3 + 4\text{SO}_2 + \text{Heat} 4 FeS + 7 O 2 ​ ⟶ 2 Fe 2 ​ O 3 ​ + 4 SO 2 ​ + Heat This pyrophoric reaction can reach incandescence, igniting residual hydrocarbon vapors. Chemical cleaning (permanganate or nitrate washes) or continuous water misting is required to neutralize pyrophoric scale prior to air entry.

3. Inspection and Non-Destructive Examination (NDE) Protocols

100% Component Verification per API 939-C: API RP 939-C guidance is to identify all carbon steel piping circuits operating above 500 °F (260 °C). For lines of unknown metallurgical pedigree, Optical Emission Spectroscopy (OES) or portable spark-PMI must be deployed to quantify exact silicon weight percentages. Any piping component, fitting, or spool piece exhibiting Si < 0.10 wt% must be flagged for prioritized thickness scanning or replacement.

Profile Radiography (PRT): Essential for small-bore piping, vents, drains, and pipe bends. PRT reveals internal scale thickness and remaining base metal wall thickness without insulation removal.

Automated Ultrasonic Thickness Scanning (AUT): High-density grid scanning or phased array UT (PAUT) along straight runs and elbows to detect uniform wall thinning and identify localized acceleration.

Guided Wave Ultrasonic Testing (GWUT): Screening tool for long straight runs of insulated piping to detect significant cross-sectional area loss before conducting targeted UT verification.