Study guide

10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC)

API 571 Corrosion and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals

1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology

2 Chapter 2: Atmospheric, Water & Soil Corrosion

2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion

3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss

3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation

4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion

4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion

5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems

5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)

6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services

6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion

7 Chapter 7: High-Temperature Oxidation & Sulfidation

7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)

8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions

8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion

9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture

9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating

10 Chapter 10: Wet H2S Cracking Mechanisms

10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)

11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking

11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

12 Chapter 12: Environmental Cracking in Chemical & Refining Services

12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC

13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue

13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue

14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation

14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons

15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure

15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging

16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking

16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)

17 Chapter 17: Environmental Embrittlement & Specialized Hydriding

17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding

10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC)

Key Takeaways Explain This Topic AI

Stress-Oriented Hydrogen-Induced Cracking (SOHIC, API RP 571 Section 3.67) is an aggressive wet H2S cracking mechanism where small hydrogen-induced micro-cracks or micro-cavities form in vertical stacks oriented perpendicular to the principal tensile stress field.

Unlike classical HIC, which is driven purely by internal molecular hydrogen gas pressure along rolling planes, SOHIC requires the synergistic combination of active hydrogen charging and high tensile stress (applied mechanical stress plus residual welding stresses).

SOHIC predominantly initiates in high-stress concentration zones, particularly the heat-affected zone (HAZ) of un-post-weld heat-treated (non-PWHT) welds, weld toes, nozzle-to-shell intersections, and structural geometric discontinuities.

Standard HIC-resistant steels (such as low-sulfur calcium-treated plate) are NOT immune to SOHIC; high local tensile stress fields can still drive through-thickness crack stacking and catastrophic failure.

PWHT, which lowers residual stress and hardness, is the principal engineering mitigation for SOHIC (RP 571 notes it helps against SOHIC and SSC but not HIC), while TOFD and PAUT are the main volumetric detection methods.

Last updated: September 2026

  • Mechanistic Definition and Physics of SOHIC
  • 1. Phenomenological Description (API RP 571 Section 3.67)

Stress-Oriented Hydrogen-Induced Cracking (SOHIC) is one of the most insidious and structurally dangerous damage mechanisms encountered in wet H 2 S H_2S H 2 ​ S refining and petrochemical service.

SOHIC manifests as an array or "stack" of small, planar, hydrogen-induced micro-cracks or micro-cavities oriented vertically in the through-thickness direction, perpendicular to the principal tensile stress field.

Over time, localized shear stresses and intense hydrogen embrittlement in the ligaments between these stacked micro-cracks cause them to link together, forming a continuous, through-thickness macro-crack that propagates rapidly through the vessel or pipe wall. COMPARATIVE CRACK MORPHOLOGY

  • LAMINAR HIC (Stepwise Cracking) SOHIC (Stress-Oriented HIC)
  • ────────────────────────────────── ──────────────────────────────────
  • Driven solely by internal gas pressure Driven by hydrogen + high tensile stress
  • No applied or residual stress needed Arranged PERPENDICULAR to principal stress
  • Plate Surface Plate Surface
  • ───────────────────────── ─────────────────────────
  • ───═══─── ───═══─── ▲ High Tensile
  • \ │ │ Stress Field
  • ───═══─── ───═══─── │ (Applied Hoop
  • \ │ │ or Residual
  • ───═══─── ───═══─── │ Welding)
  • │ ▼
  • ───────────────────────── ─────────────────────────
  • Stepwise staircase across planes Vertical through-thickness stack
  • 2. The Synergistic Mechanical-Chemical Mechanism

To understand SOHIC, candidates must master the fundamental interaction between atomic hydrogen permeation and triaxial mechanical stress:

Internal Hydrogen Charging : The cathodic charging reaction in sour aqueous media ( 2 H + + 2 e − → 2 H ∙ 2H^+ + 2e^- \rightarrow 2H^\bullet 2 H + + 2 e − → 2 H ∙ ) forces nascent atomic hydrogen into the steel lattice, identical to the initiation of hydrogen blistering and HIC.

Stress-Driven Lattice Dilation & Trap Orientation : In an unstressed steel matrix, hydrogen diffuses isotropically and collects primarily at low-energy rolling inclusions, producing laminar HIC. However, in regions subject to high tensile stresses (applied operational hoop stress or un-relieved welding residual stress) , the crystal lattice undergoes elastic dilation.

Hydrostatic Tensile Stress Gradient : Atomic hydrogen is strongly attracted to regions of high hydrostatic (triaxial) tensile stress. The chemical potential of dissolved hydrogen is lowered in dilated lattice regions according to the relationship: μ H = μ H 0 − V ˉ H ⋅ σ h \mu_H = \mu_H^0 - \bar{V}_H \cdot \sigma_h μ H ​ = μ H 0 ​ − V ˉ H ​ ⋅ σ h ​ where V ˉ H \bar{V}_H V ˉ H ​ is the partial molar volume of hydrogen in iron (~ 2.0 × 10 − 6 m 3 / mol 2.0 \times 10^{-6}\text{ m}^3/\text{mol} 2.0 × 1 0 − 6 m 3 / mol ) and σ h \sigma_h σ h ​ is the hydrostatic tensile stress ( σ h = σ 1 + σ 2 + σ 3 3 \sigma_h = \frac{\sigma_1 + \sigma_2 + \sigma_3}{3} σ h ​ = 3 σ 1 ​ + σ 2 ​ + σ 3 ​ ​ ).

Through-Thickness Micro-Cavity Stacking : Under this directional stress gradient, atomic hydrogen accumulates in microstructural traps (such as fine pearlite-ferrite interfaces, sub-grain boundaries, and micro-inclusions) that are positioned perpendicular to the principal tensile stress axis .

Through-Thickness Coalescence : Once stacked vertically, the high localized stress concentration at each micro-crack tip overlaps with the adjacent micro-crack directly above and below it. The intervening metallic ligaments suffer localized plastic collapse and hydrogen embrittlement, linking the micro-cracks into a fatal through-thickness fracture network.

Loading diagram... Mechanical-Chemical Mechanism of Stress-Oriented Hydrogen-Induced Cracking (SOHIC)

Tri-Mechanism Comparison: HIC vs. SOHIC vs. SSC

API RP 571 exam questions frequently test the precise engineering boundaries and metallurgical distinctions separating HIC, SOHIC, and SSC.

Engineering Parameter Hydrogen-Induced Cracking (HIC) Stress-Oriented HIC (SOHIC) Sulfide Stress Cracking (SSC)

Primary Driving Force Internal molecular hydrogen gas ( H 2 H_2 H 2 ​ ) pressure only. Synergistic combination of internal H 2 H_2 H 2 ​ pressure + high tensile stress. High tensile stress + lattice hydrogen embrittlement (no gas cavity).

Stress Requirement Zero external applied stress; zero residual stress required. High tensile stress required (residual welding stress + applied load). High tensile stress required (typically > 30 to 50 % >30\text{ to }50\% > 30 to 50% of yield strength).

Material Hardness Sensitivity Independent of hardness; occurs readily in soft steels ( < 200 HBW <200\text{ HBW} < 200 HBW ). Occurs in soft steels ( < 200 HBW <200\text{ HBW} < 200 HBW ), but accelerated in hard weld HAZ. Extremely hardness sensitive ; occurs predominantly when hardness > 22 HRC (237 HBW) >22\text{ HRC (237 HBW)} > 22 HRC (237 HBW) .

Crack Morphology & Path Stepwise (staircase) laminar cracks parallel to rolling direction. Vertical stack of parallel micro-cracks positioned through-thickness. Sharp, highly branched, transgranular or intergranular brittle cleavage.

Primary Microstructural Location Base metal rolled plate along elongated M n S MnS M n S inclusions. Weld Heat-Affected Zone (HAZ), weld toes, and high stress raisers. Hard weld metal passes, untempered martensitic HAZ, high-strength bolting.

Immunity of HIC-Resistant Steel Immune / Highly Resistant (calcium treated, S ≤ 0.001 % S \le 0.001\% S ≤ 0.001% ). NOT immune ; can still suffer SOHIC under high tensile stress concentrations. Not applicable; SSC is governed by microstructure and hardness limits.

Critical Susceptibility Zones and Stress Concentrators

SOHIC does not occur uniformly throughout a pressure vessel or piping system. It concentrates almost exclusively in localized zones experiencing extreme tensile stress combined with active hydrogen charging:

Un-PWHT Weld Heat-Affected Zones (HAZ) :

As-welded joints contain severe residual tensile stresses that frequently reach or exceed the yield strength of the base metal (typically 50 to 75 ksi / 345 to 517 MPa ).

The HAZ undergoes rapid thermal cycling during welding, creating coarse-grained microstructures and localized hard zones that accelerate hydrogen trapping.

Weld Toe Discontinuities and Geometric Stress Concentrations :

Abrupt geometric transitions at weld toes, weld root undercuts, incomplete penetration, and excessive weld reinforcement act as intense stress raisers.

The elastic-plastic stress concentration factor ( K t K_t K t ​ ) at a sharp weld toe can amplify nominal hoop stresses by a factor of 3.0 to 5.0 , creating the hydrostatic stress gradient required to stack micro-cracks vertically.

Nozzle-to-Shell Attachments and Reinforcement Pads :

Corner joints and set-on/set-through nozzle connections experience complex triaxial stress fields from internal operating pressure, piping thermal loads, and weld shrinkage restraint.

Cold-Formed Knuckle Radii and Dished Heads :

Cold-worked vessel heads that have not received post-forming stress relief retain severe residual plastic strain and high dislocation densities.

  • Susceptible Materials & The "HIC-Resistant" Steel Limitation
  • 1. Carbon and Low-Alloy Steels

All conventional carbon steels (such as ASTM A516 Gr 70, ASTM A285 Gr C, ASTM A106 Gr B) and low-alloy steels (such as C-0.5Mo and 1.25Cr-0.5Mo) are susceptible to SOHIC when exposed to sour aqueous environments in the as-welded condition.

2. The Critical Exam Caveat: HIC-Resistant Steel Vulnerability

A common and dangerous engineering misconception—frequently highlighted in API 571 exam items—is the belief that specifying HIC-resistant steel (manufactured per NACE TM0284 with ultra-low sulfur and calcium shape control) will eliminate the risk of SOHIC.

Why HIC Steels Still Fail from SOHIC : HIC-resistant steel successfully eliminates large, elongated manganese sulfide ( M n S MnS M n S ) stringers. However, SOHIC does not require large inclusion stringers to initiate; it can nucleate on microstructural bandings, sub-micron inclusions, or grain boundaries when driven by high localized tensile stresses.

If an un-PWHT weld in HIC-resistant plate is subjected to high residual and applied tensile stress in severe sour service, SOHIC can and will initiate in the weld HAZ.

Conclusion : HIC-resistant metallurgy alone is insufficient to mitigate SOHIC. True mitigation requires mechanical stress reduction via post-weld heat treatment.

  • Engineering Prevention and Mitigation Strategies
  • 1. Post-Weld Heat Treatment (PWHT)

Post-Weld Heat Treatment (PWHT) is the primary engineering defense against SOHIC.

Residual Stress Relief : Standard PWHT per ASME Section VIII, Division 1 (holding at 1100 °F to 1250 °F / 593 °C to 677 °C for a minimum of 1 hour per inch of thickness) reduces peak residual tensile stresses from near-yield levels (>50 ksi) down to below 15 to 20 ksi (100 to 138 MPa) .

Eliminating the Stacking Driving Force : By drastically diminishing the hydrostatic tensile stress field ( σ h \sigma_h σ h ​ ), PWHT removes the directional driving force that organizes hydrogen micro-cracks into vertical stacks.

Microstructural Tempering : PWHT tempers localized hard spots in the weld metal and HAZ, softening untempered martensite/bainite and reducing hydrogen trap binding energies.

Industry Practice : Owners commonly require PWHT of carbon steel weldments in wet H2S service where SOHIC risk is significant. NACE MR0103 / ISO 17945 itself controls hardness (refinery carbon steel weld deposits are commonly limited to 200 HBW per NACE SP0472) rather than requiring PWHT in every case.

2. Weld Joint Design and Profile Blending

Smooth Contour Blending : Fabricators must contour and blend weld toes smoothly into the adjacent base plate, maintaining a re-entrant angle > 150 ∘ >150^\circ > 15 0 ∘ to minimize stress concentration factors.

Full Penetration Welds : Prohibiting partial-penetration welds, backing rings, or socket welds in severe wet sour service, as root crevices act as immediate SOHIC initiation points.

Toe Grinding : Grinding weld toes with a burr tool to remove surface micro-notches and transition the weld profile smoothly.

3. Barrier Cladding and Environmental Controls

Corrosion-Resistant Cladding / Overlay : Applying an internal barrier of Nickel-Base Alloy 625 or Austenitic Stainless Steel (316L) stops electrochemical corrosion, entirely preventing atomic hydrogen generation and permeation into the backing carbon steel.

Polysulfide Injection & Cyanide Scrubbing : Neutralizing cyanides with ammonium polysulfide ( A P S APS A PS ) in FCC overheads protects the iron sulfide film, depressing hydrogen charging.

Non-Destructive Examination (NDE) Methodologies

Detecting SOHIC represents a major volumetric inspection challenge because the micro-cracks are stacked vertically through-thickness and are often confined to narrow weld heat-affected zones.

NDE Technique Inspection Geometry SOHIC Detection Capability & Limitations

Time-of-Flight Diffraction (TOFD) Dual pitch-catch longitudinal wave probes across the weld seam. Superior method for detecting and vertically sizing through-thickness SOHIC crack stacks; resolves diffracted tip signals from upper and lower crack boundaries with ± 0.5 to 1.0 mm \pm 0.5\text{ to }1.0\text{ mm} ± 0.5 to 1.0 mm accuracy.

Phased Array UT (PAUT) Multi-angle sectorial scanning from adjacent plate surfaces. Highly effective for imaging vertical crack stacks in the weld HAZ; advanced Total Focusing Method (TFM) provides crisp cross-sectional B-scan and S-scan flaw rendering.

Wet Fluorescent Magnetic Particle (WFMT) AC electromagnetic yoke applied directly to the internal wetted surface. Gold standard for identifying surface-breaking SOHIC cracks and micro-cracking at weld toes; cannot detect subsurface, embedded SOHIC stacks.

Straight-Beam UT (0° UT) Compression wave normal to the plate surface. Poor sensitivity for SOHIC; vertical, through-thickness crack stacks present an edge-on orientation that reflects minimal specular acoustic energy back to a 0° probe.

Acoustic Emission Testing (AET) Piezoelectric sensor array monitored during hydrostatic testing. Detects acoustic stress burst signals emitted by active through-thickness micro-crack tearing under pressure.