Study guide

11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

API 571 Corrosion and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals

1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology

2 Chapter 2: Atmospheric, Water & Soil Corrosion

2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion

3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss

3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation

4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion

4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion

5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems

5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)

6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services

6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion

7 Chapter 7: High-Temperature Oxidation & Sulfidation

7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)

8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions

8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion

9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture

9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating

10 Chapter 10: Wet H2S Cracking Mechanisms

10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)

11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking

11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

12 Chapter 12: Environmental Cracking in Chemical & Refining Services

12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC

13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue

13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue

14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation

14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons

15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure

15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging

16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking

16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)

17 Chapter 17: Environmental Embrittlement & Specialized Hydriding

17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding

11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

Key Takeaways Explain This Topic AI

Caustic stress corrosion cracking (API RP 571 Section 3.15) causes cracking in carbon steels, low alloys, and 300-series stainless steels exposed to aqueous NaOH or KOH at elevated temperatures under sustained tensile stress.

The NACE Caustic Handling Chart delineates three operational regimes: Zone A (as-welded carbon steel acceptable), Zone B (mandatory PWHT at 1150 °F to 1250 °F required), and Zone C (nickel alloys required).

Standard 300-series austenitic stainless steels crack rapidly in caustic solutions above 200 °F to 250 °F (93 °C to 121 °C) and must never be used as a material upgrade for hot alkaline services.

In carbon steel, caustic cracking exhibits predominantly intergranular branching with oxide-filled fissures; in stainless steel, cracks can be transgranular or intergranular.

Primary detection relies on internal Wet Fluorescent Magnetic Particle Testing (WFMT) for carbon steel equipment and external shear wave ultrasonic or Phased Array UT (PAUT) for non-intrusive crack sizing.

Last updated: September 2026

11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

Caustic Stress Corrosion Cracking ( Caustic SCC ), historically termed caustic embrittlement , is an environmental cracking mechanism detailed in API RP 571 Section 3.15 . It involves the cracking of carbon steels, low-alloy steels, and 300-series austenitic stainless steels exposed to aqueous alkaline solutions—most commonly sodium hydroxide ( N a O H NaOH N a O H ) or potassium hydroxide ( K O H KOH K O H )—under the combined influence of sustained tensile stress and elevated temperature.

Caustic SCC (3.15) vs. Caustic Corrosion (3.14)

A frequent distinction tested on the API 571 examination is the difference between Caustic Corrosion and Caustic Stress Corrosion Cracking : +-----------------------------------------------------------------------------------+

  • | CAUSTIC CORROSION (3.14) vs. CAUSTIC STRESS CORROSION (3.15) |
  • +-----------------------------------------------------------------------------------+
  • | FEATURE | CAUSTIC CORROSION (3.14) | CAUSTIC SCC (3.15) |
  • | :--- | :--- | :--- |
  • | Damage Mode | Active metal loss, thinning| Environmental cracking |
  • | Tensile Stress Needed?| No | Yes (Mandatory) |
  • | Morphology | Localized gouging, grooves,| Intergranular branching |
  • | | horseshoe depressions | (carbon steel) or TG network |
  • | Driving Force | High-heat flux boiling | Alkaline corrosion potential |
  • | | dissolving protective oxide| rupturing passivated tip |
  • | Failure Consequence | Wall thinning, rupture | Brittle-like crack thru-wall |
  • +-----------------------------------------------------------------------------------+

API RP 571 Section 3.14 (Caustic Corrosion): Involves accelerated general or localized metal loss, gouging, and deep horseshoe-shaped depressions. It occurs when concentrated caustic chemically dissolves protective magnetite ( F e 3 O 4 Fe_3O_4 F e 3 ​ O 4 ​ ) films on carbon steel under high heat flux, steam blanketing, or localized boiling conditions without requiring tensile stress.

API RP 571 Section 3.15 (Caustic SCC): Involves sharp, brittle-like crack propagation through metal grains or along grain boundaries driven by sustained tensile stress. Bulk metal loss is minimal or absent.

The NACE Caustic Handling Envelope

The industrial guideline governing material selection and heat treatment for sodium hydroxide service is the NACE Caustic Handling Chart (NACE SP0403; a version of the chart appears in API RP 571 Section 3.15). The chart maps operational temperature against caustic concentration (wt% N a O H NaOH N a O H ) to define three critical operational zones for carbon steel: Temperature (°F)

  • ^
  • 250 | ZONE C
  • | (Carbon steel NOT recommended;
  • 200 | Upgrade to Nickel Alloys: Alloy 200, 400)
  • | -----------------------------------------------------
  • 150 | ZONE B
  • | (Carbon steel ACCEPTABLE ONLY WITH
  • 100 | Mandatory Stress Relief / PWHT)
  • | -----------------------------------------------------
  • 50 | ZONE A
  • | (Carbon steel ACCEPTABLE As-Welded, No PWHT)
  • +------------------------------------------------------------->
  • 0 10 20 30 40 50 60 wt% NaOH
  • Detailed Zone Analysis

Operational Zone Temperature & Concentration Limits Material & Fabrication Mandate

Zone A Ambient temperatures up to approximately 115 °F to 140 °F (46 °C to 60 °C) depending on concentration ( 5 % to 50 % NaOH 5\%\text{ to }50\%\text{ NaOH} 5% to 50% NaOH ). Carbon steel is acceptable as-welded. Post-weld heat treatment (PWHT) is not mandatory to resist caustic cracking, though standard piping code requirements still apply.

Zone B Temperatures above the Zone A boundary up to approximately 180 °F to 200 °F (82 °C to 93 °C). Carbon steel is acceptable ONLY IF given a mandatory Post-Weld Heat Treatment (PWHT). All fabrication girth welds, longitudinal seams, piping branch welds, nozzle attachments, and internal/external structural attachment welds (e.g., pipe supports, lifting lugs) must be stress-relieved.

Zone C Temperatures above Zone B boundary, or high caustic concentrations ( > 20 % to 50 % > 20\%\text{ to }50\% > 20% to 50% ) operating at temperatures > 180 °F ( 82 °C ) > 180\text{ °F } (82\text{ °C}) > 180 °F ( 82 °C ) . Carbon steel is not recommended regardless of PWHT. Severe cracking and active caustic corrosion occur. Operating units must upgrade to nickel-base alloys (Alloy 200, Alloy 201, Alloy 400, Alloy 600).

The Critical Stainless Steel Misconception

A critical trap on the API 571 examination concerns the behavior of 300-series austenitic stainless steels in caustic environments:

CRITICAL METALLURGICAL WARNING: 300-series austenitic stainless steels (304, 304L, 316, 316L) are NOT an upgrade for carbon steel in hot caustic service!

While austenitic stainless steels offer excellent resistance to dilute caustic at ambient temperatures, they become extremely susceptible to rapid caustic stress corrosion cracking above 200 °F to 250 °F (93 °C to 121 °C) . In hot, concentrated caustic solutions, 300 SS frequently fails faster than non-stress-relieved carbon steel. When operating conditions enter Zone C, equipment must be upgraded to nickel-base alloys , never standard austenitic stainless steels.

Nickel Alloy Performance in Caustic

Commercially Pure Nickel (Alloy 200 / UNS N02200 & Alloy 201 / UNS N02201): Represent the premier materials for high-temperature, concentrated caustic soda evaporators and handling equipment. Alloy 201 (low carbon, C ≤ 0.02 % C \le 0.02\% C ≤ 0.02% ) is specified above 600 °F (316 °C) to prevent graphitization.

Alloy 400 (Monel / UNS N04400): Exhibits exceptional resistance to caustic solutions up to boiling temperatures across all concentrations.

Alloy 600 (UNS N06600): Superior resistance to cracking in high-temperature caustic up to 600 °F (316 °C).

Loading diagram... NACE Caustic Handling Protocol and Material Selection Logic

Critical Factors Driving Caustic SCC

Caustic Concentration & Temperature: Cracking probability increases with both increasing caustic concentration and operating temperature. In boiling solutions, caustic cracking can occur in minutes.

Tensile Stress: High sustained tensile stresses are mandatory. Non-PWHT fabrication weld residual stresses routinely exceed the base metal yield strength ( > 30 to 50 ksi > 30\text{ to }50\text{ ksi} > 30 to 50 ksi ), initiating cracks directly along weld toes and heat-affected zones.

Steam-Tracing & Thermal Hotspots (The Concentration Hazard):

In piping designed for dilute caustic (e.g., 2 % to 5 % NaOH 2\%\text{ to }5\%\text{ NaOH} 2% to 5% NaOH ), bulk fluid temperatures may reside safely within Zone A.

However, if the line is steam-traced or improperly heated , localized hot spots on the pipe wall can cause local boiling.

Evaporative boiling concentrates dilute caustic against the hot pipe wall into 30 % to 50 % NaOH 30\%\text{ to }50\%\text{ NaOH} 30% to 50% NaOH . Local skin temperatures exceed Zone B/C thresholds, resulting in rapid through-wall caustic cracking.

Appearance & Morphology of Damage

In Carbon and Low-Alloy Steels:

Cracking is predominantly intergranular (IG) , propagating along ferrite grain boundaries.

Cracks propagate perpendicular to the principal tensile stress, originating on the process-wetted internal surface.

Crack fissures are typically filled with dense, dark, magnetic iron oxide corrosion products ( magnetite, F e 3 O 4 Fe_3O_4 F e 3 ​ O 4 ​ ).

Macroscopic appearance exhibits tight, spider-web craze cracking radiating from weld toes, nozzle attachment welds, and structural clip fillet welds.

In 300-Series Austenitic Stainless Steels:

Cracking can be transgranular (TG) or intergranular (IG) , depending on temperature and solution concentration.

Multi-branched crack networks resemble chloride SCC, initiating at microscopic surface pits or notches.

Affected Refining Units & Equipment

Caustic Treating Units (Merox Units): Mercaptan extraction towers, pre-wash caustic vessels, caustic regenerator columns, caustic transfer pumps, and caustic piping circuits.

Crude Distillation Units:

Caustic injection systems downstream of the desalter where dilute N a O H NaOH N a O H ( 1 % to 3 % 1\%\text{ to }3\% 1% to 3% ) is injected into crude oil to neutralize hydrolyzable magnesium and calcium chlorides ( M g C l 2 , C a C l 2 MgCl_2, CaCl_2 M g C l 2 ​ , C a C l 2 ​ ).

Caustic injection quills, crude transfer lines, and preheat exchanger shells/tubes where un-neutralized caustic concentrates.

Boiler Feedwater & Steam Generation Assets: Boiler blowdown piping, steam drums, mud drums, and deaerator internals where water treatment caustic chemicals undergo localized evaporative concentration.

Caustic Storage & Truck Unloading: Caustic storage tanks, tank heating coils, and transfer lines subjected to high-pressure steam tracing.

  • Prevention, Mitigation & Materials Selection
  • 1. Post-Weld Heat Treatment (PWHT)

For carbon steel operating in Zone B, mandatory Post-Weld Heat Treatment (PWHT) must be performed on all welds in accordance with NACE SP0403 and API RP 571 .

Heat treatment temperature must be maintained between 1,150 °F and 1,250 °F (621 °C to 677 °C) for a minimum hold time of 1 hour per inch of thickness (minimum 1 hour hold) .

Scope of PWHT: Heat treatment must encompass the entire component or joint, including girth butt welds, nozzle reinforcement pad welds, internal support tray clips, external pipe support shoes, and any temporary lifting lug attachment sites.

2. Steam-Tracing and Heating Coil Design

Design steam tracing systems to prevent local overheating and boiling of caustic.

Utilize low-pressure steam ( < 50 psig < 50\text{ psig} < 50 psig ) or tempered hot-water tracing rather than high-pressure steam.

Employ spacer blocks or non-contact tracing to avoid direct metallic contact between steam tubes and caustic pipe walls.

3. Caustic Injection Point Architecture

Caustic injected into crude units must utilize a properly designed injection quill positioned in the center third of the hydrocarbon pipe stream.

The quill must direct flow downstream into high-velocity, turbulent crude to ensure instantaneous dispersion and prevent droplet impingement against pipe walls.

The piping spool downstream of the quill should be fabricated from Alloy 20 or Alloy 400 for a minimum length of 5 pipe diameters.

4. Materials Upgrades

For Zone C service, upgrade from carbon steel to Alloy 200, Alloy 201, Alloy 400 (Monel), or Alloy 600 .

Remember: 300-series stainless steels must never be used as a material upgrade for hot caustic service.

Inspection & Non-Destructive Examination (NDE)

Inspection Method Target Metallurgy & Capability Practical Field Considerations

Wet Fluorescent Magnetic Particle Testing (WFMT) Primary method for carbon steel internals. Provides outstanding sensitivity for detecting tight, oxide-filled, surface-breaking caustic cracks along weld toes and heat-affected zones. Requires internal vessel entry and thorough abrasive surface cleaning (white metal blast / grit blasting). Regular dry magnetic particle testing is significantly less sensitive to tight crack networks.

Liquid Penetrant Testing (PT) Primary surface examination method for non-ferromagnetic alloys (austenitic stainless steels and nickel alloys). Ineffective on carbon steel carrying heavy oxide scale; penetrant can be masked by porous magnetite inside crack mouths.

Angle Beam Ultrasonic Testing (Shear Wave / PAUT) Non-intrusive external examination capable of detecting, characterizing, and sizing the through-wall depth of internal caustic cracks in piping and vessels. Highly effective for baseline screening and turnaround verification without internal entry; requires experienced technicians and proper calibration blocks.

Acoustic Emission Testing (AET) Online screening method to detect active crack initiation and growth during pressure spikes or operational thermal cycles. Identifies active crack locations for targeted follow-up NDE; does not size flaw depth.