Study guide
13.2 Thermal Fatigue & Thermal Shock
API 571 Corrosion and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals
1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology
2 Chapter 2: Atmospheric, Water & Soil Corrosion
2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion
3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss
3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation
4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion
4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion
5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems
5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)
6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services
6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion
7 Chapter 7: High-Temperature Oxidation & Sulfidation
7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)
8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions
8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion
9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture
9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating
10 Chapter 10: Wet H2S Cracking Mechanisms
10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)
11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking
11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)
12 Chapter 12: Environmental Cracking in Chemical & Refining Services
12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC
13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue
13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue
14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation
14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons
15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure
15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging
16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking
16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)
17 Chapter 17: Environmental Embrittlement & Specialized Hydriding
17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding
13.2 Thermal Fatigue & Thermal Shock
Key Takeaways Explain This Topic AI
Thermal Fatigue (API RP 571 Section 3.64) is cracking caused by cyclic thermal stresses that develop when constrained thermal expansion or contraction creates alternating mechanical strains during temperature swings or across steep thermal gradients.
The cracking morphology of thermal fatigue exhibits a distinctive 'craze cracking' or 'alligator hide' surface network of dagger-shaped, blunt-tipped, transgranular cracks that are heavily packed with dense, tenacious oxide scale.
Mixing tees (where hot and cold streams join, such as hydroprocessing quench lines, desuperheaters, and boiler feedwater injection points) and cyclic equipment (delayed coker drums undergoing fill, water-quench, and steam-out) represent the highest-risk refining services.
Thermal Shock (API RP 571 Section 3.65) differs from thermal fatigue because it causes immediate, non-cyclic structural failure or through-wall cracking from a massive thermal gradient in a single or very few cycles, when thermal strain abruptly exceeds the material's ultimate tensile or yield strength.
Mitigation of thermal fatigue in mixing tees commonly uses internal thermal sleeves or quills with an annular gap to shield the pressure boundary from turbulent thermal mixing, while delayed cokers require strict computerized ramp rates and preheating controls.
Last updated: September 2026
13.2 Thermal Fatigue & Thermal Shock — API RP 571 Sections 3.64 & 3.65
Thermal stress cracking in refining and petrochemical operations encompasses two related yet fundamentally distinct damage mechanisms cataloged in API Recommended Practice 571:
Thermal Fatigue (Section 3.64): Subcritical, progressive cracking driven by repeated, cyclic temperature fluctuations that induce alternating thermal expansion and contraction strains under mechanical restraint.
Thermal Shock (Section 3.65): Non-cyclic or low-cycle catastrophic structural failure resulting from a sudden, massive temperature gradient where localized thermal strain instantaneously exceeds the yield or ultimate tensile strength of the material.
Both mechanisms stem from the physics of thermal expansion, but their operational timescales, morphology, and engineering mitigations differ markedly.
Thermomechanical Stress Principles & Mechanics
When a metallic component experiences a temperature change ( Δ T \Delta T Δ T ), it undergoes a dimensional change proportional to its mean coefficient of thermal expansion ( α \alpha α ) : Δ L L = ϵ t h = α ⋅ Δ T \frac{\Delta L}{L} = \epsilon_{th} = \alpha \cdot \Delta T L Δ L = ϵ t h = α ⋅ Δ T
If the component is free to expand and contract without external or internal restraint, zero mechanical stress is induced. However, in pressure vessels, heat exchangers, and piping systems, thermal movement is inevitably restrained by:
Rigid piping anchors, vessel nozzles, and structural guide supports.
Heavy cross-sectional wall thickness differences (e.g., a thin nozzle neck welded to a thick shell course).
Steep internal-to-external temperature gradients across the wall thickness.
Bimetallic joints (dissimilar metal welds) joining alloys with differing thermal expansion coefficients.
When thermal expansion or contraction is fully restrained in one dimension, the resulting thermal stress ( σ t h \sigma_{th} σ t h ) is expressed as: σ t h = − E ⋅ α ⋅ Δ T \sigma_{th} = -E \cdot \alpha \cdot \Delta T σ t h = − E ⋅ α ⋅ Δ T
For equibiaxial restraint (such as the surface of a thick pressure vessel wall), Poisson's ratio ( ν \nu ν ) amplifies the induced stress: σ t h = − E ⋅ α ⋅ Δ T 1 − ν \sigma_{th} = -\frac{E \cdot \alpha \cdot \Delta T}{1 - \nu} σ t h = − 1 − ν E ⋅ α ⋅ Δ T
where E E E is Young's modulus of elasticity. For carbon steel, with E ≈ 30 × 10 6 psi E \approx 30 \times 10^6\text{ psi} E ≈ 30 × 1 0 6 psi and α ≈ 6.5 × 10 − 6 in/in/°F \alpha \approx 6.5 \times 10^{-6}\text{ in/in/°F} α ≈ 6.5 × 1 0 − 6 in/in/°F , a sudden unconstrained surface temperature drop of only 200 °F (111 °C) generates a theoretical localized surface tensile stress exceeding 55,000 psi (380 MPa) —well above the room-temperature yield strength of typical ASTM A106 Grade B pipe or A516 Grade 70 plate. THE MECHANICS OF THERMAL FATIGUE CYCLING
- Hot Operating State Cold Quench / Temperature Swing
- ┌────────────────────────┐ ┌────────────────────────┐
- │ Metal attempts to │ │ Metal attempts to │
- │ expand against rigid │──────CYCLE────>│ contract; exterior │
- │ restraint. │ SWING │ surface develops high │
- │ Compressive plastic │ │ cyclic TENSILE stress. │
- │ yielding occurs. │ │ Cracks initiate at ID. │
- └────────────────────────┘ └────────────────────────┘
- Critical Factors Driving Thermal Fatigue (API RP 571 Section 3.64)
- 1. Temperature Swing Magnitude ( Δ T \Delta T Δ T )
API RP 571 gives a rule of thumb that thermal fatigue cracking may be suspected where temperature swings exceed about 200 °F (93 °C) .
Thermal fatigue is primarily strain-controlled (low-cycle fatigue). While high-frequency thermal stripping with temperature fluctuations of 50 °F to 100 °F (28 °C to 56 °C) can cause cracking over millions of cycles, larger swings exceeding 200 °F (111 °C) produce rapid failure within hundreds to thousands of cycles. The rate of damage accumulation accelerates exponentially with the magnitude of Δ T \Delta T Δ T .
2. Cycling Frequency and Thermal Conductivity
Materials with low thermal conductivity (such as austenitic stainless steels, k ≈ 15 W/(m K) k \approx 15\text{ W/(m K)} k ≈ 15 W/(m K) ) establish much steeper through-wall thermal gradients than carbon steels ( k ≈ 50 W/(m K) k \approx 50\text{ W/(m K)} k ≈ 50 W/(m K) ) or copper alloys. Consequently, austenitic stainless steels generate higher localized surface thermal strains under rapid thermal cycling.
3. Dissimilar Metal Welds (DMWs)
When ferritic steels (such as 2.25Cr-1Mo or carbon steel) are welded directly to austenitic stainless steels (such as 304H or 347) in high-temperature hydrocrackers, cat crackers, or furnace headers, their differing thermal expansion coefficients create severe cyclic stresses:
Ferritic steel thermal expansion: α ≈ 12 × 10 − 6 / K \alpha \approx 12 \times 10^{-6}/\text{K} α ≈ 12 × 1 0 − 6 / K ( 6.7 × 10 − 6 / °F 6.7 \times 10^{-6}/\text{°F} 6.7 × 1 0 − 6 / °F )
Austenitic stainless steel thermal expansion: α ≈ 18 × 10 − 6 / K \alpha \approx 18 \times 10^{-6}/\text{K} α ≈ 18 × 1 0 − 6 / K ( 10.0 × 10 − 6 / °F 10.0 \times 10^{-6}/\text{°F} 10.0 × 1 0 − 6 / °F )
Under thermal cycling, the austenitic side expands ~30% more than the ferritic side. High cyclic shear stresses concentrate at the fusion line, causing thermal fatigue cracking along the ferritic heat-affected zone (HAZ).
High-Risk Refinery Units & Equipment Assets HIGH-RISK REFINERY THERMAL FATIGUE SERVICES
- Mixing Tees & Quench Points Delayed Coker Drums
- ┌─────────────────────────────────────┐ ┌─────────────────────────────────────┐
- │ - Hydroprocessing reactor quench │ │ - 24 to 48-hour batch cycle │
- │ - Desuperheater steam/water inject │ │ - 900°F (482°C) oil filling │
- │ - FCC fractionator reflux tees │ │ - Rapid cold water quench │
- │ - Turbulent thermal stripping at ID │ │ - Skirt attachment cracking │
- └─────────────────────────────────────┘ └─────────────────────────────────────┘
- Boiler Tubes & Soot Blowers Dissimilar Metal Welds (DMW)
- ┌─────────────────────────────────────┐ ┌─────────────────────────────────────┐
- │ - Cold steam/air soot blower blast │ │ - Low alloy to austenitic SS welds │
- │ - Rapid local tube chilling │ │ - 30% thermal expansion mismatch │
- │ - Transverse craze cracking │ │ - Fusion-line cyclic shear tearing │
- │ - Thick oxide scale packing │ │ - Catalytic reforming / hydrocracking│
- └─────────────────────────────────────┘ └─────────────────────────────────────┘
- 1. Mixing Tees and Quench Injection Stations
Mixing tees represent the single most common location for thermal fatigue failures. When two fluid streams at differing temperatures merge (such as cold hydrogen quench injected into hot hydrocracker reactor effluent lines, cold condensate into steam desuperheaters, or cold wash oil into FCC overhead vapors), turbulent mixing does not occur instantaneously. Unstable eddies of hot and cold fluid alternate against the inner pipe wall at frequencies of 1 Hz to 50 Hz (a phenomenon known as thermal stripping ). This causes rapid cyclic thermal strains in the inner wetted skin, initiating through-wall cracking within months.
2. Delayed Coker Drums
Delayed coking is a severe batch process operating on a 24- to 48-hour cycle. Empty coke drums are preheated with steam, filled with heavy residuum at 900 °F (482 °C) , and subsequently quenched by pumping cold water into the bottom of the drum to cool the solid coke bed. Water quench introduces rapid localized thermal gradients that contract the vessel shell unevenly. This severe thermal cycling induces:
Circumferential weld cracking and shell bulging ("elephant footing" or drum ovalization).
Catastrophic fatigue cracking at the skirt-to-cone attachment weld , where thermal expansion of the hot cone is mechanically restrained by the cooler cylindrical skirt.
3. Boiler Waterwall and Superheater Tubes
Boiler tubes in utility and refinery power plants suffer thermal fatigue in soot-blower lanes. When soot blowers inject cold steam or compressed air against hot operating tubes (700 °F to 1,000 °F / 371 °C to 538 °C) to dislodge slag, localized surface chilling induces cyclic tensile stress, forming transverse craze cracks.
Morphology and Physical Appearance of Thermal Fatigue
Thermal fatigue generates a unique, unmistakable morphological signature under visual and metallographic inspection: THERMAL FATIGUE MORPHOLOGY: CRAZE CRACKING
- Pipe / Vessel Inner Wetted Surface (Plan View)
- ┌──────────────────────────────────────────────────────────┐
- │ ┌──────┬───────┐ ┌───────┬─────────┐ ┌─────────┐ │
- │ │ │ └──┘ │ └───┘ │ │
- │ │ │ "CRAZE CRACKING" / "ALLIGATOR HIDE" │ │
- │ │ │ Multidirectional mosaic network │ │
- │ └──┬───┴───────┐ ┌──────┴─────────┐ ┌─────┬───┘ │
- │ │ └───┘ └───┘ │ │
- └──────┴──────────────────────────────────────────┴────────┘
- Cross-Sectional Microscopic View
- ═════════════════════════════╤════════════════════════════════
- │ ◄── Broad, surface-breaking mouth
- / \
- / \ Dense, dark iron oxide
- │ █ │ scale filling the fissure
- │ █ │ (Magnetite Fe3O4 / Spinels)
- \ █ /
- \ / ◄── Wide, dagger-shaped,
- ▼ blunt-tipped transgranular crack
- 1. Macroscopic Appearance: "Craze Cracking" or "Alligator Hide"
Because thermal strains in a pipe or vessel wall are typically equibiaxial (acting equally in circumferential and longitudinal directions), thermal fatigue cracking manifests as an interconnected, multidirectional network of surface fissures. This pattern is universally described in API RP 571 as craze cracking , alligator hide , or elephant hide .
If thermal restraint is directional (such as longitudinal bending restraint in a heat exchanger tube or circumferential hoop restraint in a thick-wall mixing tee), cracks orient perpendicular to the direction of maximum tensile strain .
2. Microscopic Characteristics
Crack Path: Predominantly transgranular , propagating directly across the crystalline grains.
Crack Profile: Cracks are characteristically wide, dagger-shaped, and blunt-tipped . Unlike the ultra-fine, sharp fissures of mechanical fatigue or stress corrosion cracking, thermal fatigue cracks exhibit significant crack-mouth opening displacement.
Oxide Wedging: Thermal fatigue fissures are heavily packed with dense, dark oxide scale (magnetite F e 3 O 4 Fe_3O_4 F e 3 O 4 in carbon steels or complex chrome-iron spinels in alloy steels). The thick oxide scale wedged within the crack opening acts as a mechanical wedge during the compressive portion of thermal cycles, concentrating high mechanical stress at the crack tip and accelerating propagation.
Thermal Shock (API RP 571 Section 3.65)
Thermal Shock is defined as structural fracturing or through-wall rupture resulting from sudden, extreme thermal gradients experienced in a single cycle or very few cycles . While thermal fatigue is a progressive endurance failure, thermal shock is an acute overload failure.
Feature Thermal Fatigue (API 571 Section 3.64) Thermal Shock (API 571 Section 3.65)
Cycle Count High or medium cycles ( 10 2 10^2 1 0 2 to 10 7 + 10^7+ 1 0 7 + cycles) Single event or very few cycles ( 1 1 1 to 10 10 10 cycles)
Mechanism Cumulative subcritical fatigue crack propagation Instantaneous strain exceeding yield or ultimate tensile strength
Typical Drivers Quench mixing tees, delayed coker cycles, soot blowers Rain deluge on hot uninsulated vessels, emergency cold water quench
Crack Morphology Dagger-shaped, blunt-tipped, craze cracking filled with oxide Sharp, clean, fast-running through-wall brittle fracture or shattering
Vulnerable Thickness All thicknesses; common in standard piping Thick-wall vessels (> 1 to 4+ inches) due to extreme thermal lag
Operational Causes of Thermal Shock
Rainstorms on Uninsulated Hot Equipment: Vessels, heavy piping flanges, or exchanger shells operating above 400 °F (204 °C) that lack thermal insulation (or where insulation jacketing has blown off) suffer massive localized chilling during sudden rainstorms, generating instantaneous surface tensile strains that shatter brittle materials.
Emergency Cold Water Injection: Uncontrolled injection of cold emergency cooling water into dry, overheated steam drums or fired heater tubes.
Cryogenic Spill / Inadvertent Auto-Refrigeration: Flashing light hydrocarbons (LPG, propane, butane) venting across carbon steel components, dropping metal temperatures below the ductile-to-brittle transition temperature (DBTT) while thermal contraction generates massive tensile stresses.
Prevention and Engineering Mitigations ENGINEERING MITIGATION: THERMAL MIXING SLEEVE
- Hot Main Process Stream
- ───────────────────────┐ ┌──────────────
- │ Annular Stagnant Gap │
- │ (Protects Pressure Boundary) │
- ═══════════════════════╪═════════════════════════════════╪══════════════
- ═══════════════════════╡ ┌─────────────────────────────┐ ╞══════════════
- │ │ Thermal Mixing Quill/Sleeve │ │
- │ │ (High-Nickel Alloy / 316SS) │ │
- Cold Quench Stream │ │ │ │
- ──────────────────────┘ │ │ └──────────────
- └─────────────┐ ┌─────────────┘
- │ │ Cold Quench
- │ │ Centerline Discharge
- ▼ ▼ (Mixing occurs in bulk flow)
Thermal Sleeves & Mixing Quills: In all quench mixing tees where Δ T > 100 °F \Delta T > 100\text{ °F} Δ T > 100 °F ( 56 °C 56\text{ °C} 56 °C ), install an internal thermal mixing sleeve or quill . The quill discharges the cold quench stream directly into the centerline of the hot flow, allowing turbulent mixing to complete within the fluid core before contacting any metal surface. An annular stagnant gap between the sleeve and the pressure-retaining pipe wall insulates the pressure boundary from temperature fluctuations.
Controlled Ramp Rates: Enforce strict computerized ramp rates for heat-up and cool-down cycles. In delayed coke drums and heavy hydrocracker reactors, cool-down rates are typically limited to 50 °F to 100 °F per hour (28 °C to 56 °C/hr) per owner and equipment-manufacturer procedures.
Dissimilar Metal Weld Design: When joining ferritic and austenitic steels, use nickel-base weld consumables (such as Alloy 82, Alloy 182, Alloy 52, or Alloy 152) . Nickel alloys have an intermediate thermal expansion coefficient ( α ≈ 14 × 10 − 6 / K \alpha \approx 14 \times 10^{-6}/\text{K} α ≈ 14 × 1 0 − 6 / K ) that bridges the gap between ferritic and austenitic steels, cutting interfacial cyclic shear stresses by more than 50%.
Weatherproofing and Insulation: Hot operating vessels ( > 200 °F / 93 °C > 200\text{ °F} / 93\text{ °C} > 200 °F /93 °C ) should be protected with continuous, well-maintained thermal insulation and weather-sealed aluminum or stainless steel jacketing to prevent thermal shock from cold rain impingement.
Inspection, Non-Destructive Examination (NDE) & Detection
Inspection Technique Application for Thermal Fatigue & Shock Detection Capabilities & Limitations
Liquid Penetrant Testing (PT) Flanged mixing tees, internal mixing quills, and stainless steel / non-ferromagnetic components. Primary surface method for detecting fine craze cracking. Requires thorough solvent degreasing and oxide removal.
Magnetic Particle Testing (MT / WFMT) Ferromagnetic carbon and low-alloy steel vessels, coker skirt-to-cone welds, and external nozzle welds. Wet Fluorescent MT (WFMT) using an AC yoke provides high sensitivity for detecting surface-breaking thermal cracks.
Phased Array Ultrasonic (PAUT) / TOFD External non-intrusive scanning of mixing tees, coker drum shells, and dissimilar metal welds. Time-of-Flight Diffraction (TOFD) and PAUT provide accurate through-wall depth sizing of blunt, oxide-filled thermal cracks.
Internal Visual / Borescopy (VT) High-temperature mixing tees, desuperheaters, and boiler headers during shutdowns. Video borescopes inserted through thermowell taps or flange openings visually confirm craze cracking networks and quill integrity.