Study guide
16.2 Dissimilar Metal Weld (DMW) Cracking
API 571 Corrosion and Materials Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals
1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology
2 Chapter 2: Atmospheric, Water & Soil Corrosion
2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion
3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss
3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation
4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion
4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion
5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems
5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)
6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services
6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion
7 Chapter 7: High-Temperature Oxidation & Sulfidation
7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)
8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions
8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion
9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture
9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating
10 Chapter 10: Wet H2S Cracking Mechanisms
10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)
11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking
11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)
12 Chapter 12: Environmental Cracking in Chemical & Refining Services
12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC
13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue
13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue
14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation
14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons
15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure
15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging
16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking
16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)
17 Chapter 17: Environmental Embrittlement & Specialized Hydriding
17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding
16.2 Dissimilar Metal Weld (DMW) Cracking
Key Takeaways Explain This Topic AI
Dissimilar Metal Weld (DMW) Cracking (API RP 571 Section 3.26) is the failure of welded joints connecting materials with starkly differing chemical compositions, thermal expansion coefficients, and mechanical properties—most commonly ferritic/martensitic steels joined to austenitic stainless steels.
The failure mechanism is driven by three factors: thermal expansion mismatch (RP 571: 300 series SS expands about 25% to 30% more than carbon or low alloy steel), high-temperature carbon migration across the fusion boundary, and interfacial oxidation notch formation.
Above 800 °F to 900 °F (427 °C to 482 °C), carbon diffuses down its chemical activity gradient from the ferritic steel into the chromium-rich austenitic weld metal, creating a soft, weak decarburized zone in the ferritic base metal and a hard, brittle chromium carbide zone on the austenitic side.
Cracks initiate predominantly on the OD or ID surface and propagate along the fusion boundary within the weak decarburized ferritic zone, resulting in smooth, catastrophic separation with minimal macroscopic warning.
The primary mitigation strategy is utilizing nickel-base filler metals (ERNiCr-3 / Alloy 82, ENiCrFe-3 / Alloy 182, or ERNiCrMo-3 / Alloy 625), which possess intermediate thermal expansion coefficients and eliminate the carbon chemical potential gradient, preventing carbon migration.
Last updated: September 2026
- Dissimilar Metal Weld (DMW) Cracking Overview — API RP 571 Section 3.26
- 1. Phenomenological Nature and Definition
Dissimilar Metal Weld (DMW) Cracking is defined in API RP 571 Section 3.26 as cracking that develops in the heat-affected zone (HAZ) or along the fusion boundary of welded joints between two metals possessing significantly different chemical compositions, thermal expansion characteristics, and mechanical properties . In petroleum refining, petrochemical manufacturing, and fossil power generation, DMWs are most frequently employed to connect low-cost, creep-resistant ferritic or martensitic low-alloy steels (such as carbon steel, 1.25Cr-0.5Mo, 2.25Cr-1Mo, or 9Cr-1Mo) to high-alloy, corrosion- and oxidation-resistant austenitic stainless steels (such as AISI Types 304H, 316H, 321H, or 347H).
While these transitional weldments are indispensable for joining lower-temperature pressure boundary components to high-temperature radiant heater tubes or reactor vessels, the interface between ferritic and austenitic alloys constitutes a metallurgical, thermal, and mechanical discontinuity. Under sustained elevated temperatures and cyclic operational conditions, DMWs are subject to premature, catastrophic separation along the fusion boundary. DISSIMILAR METAL WELD ARCHITECTURE
- FERRITIC BASE METAL AUSTENITIC WELD METAL
- (e.g., 2.25Cr-1Mo Steel) (e.g., E309 / 316L)
- ┌─────────────────────────────┐ FUSION ┌─────────────────────────────┐
- │ │ LINE │ │
- │ BCC Crystal Structure │ │ │ FCC Crystal Structure │
- │ Low Thermal Expansion │ │ │ High Thermal Expansion │
- │ (alpha ~ 12-14 x 10^-6/°C) │ │ │ (alpha ~ 17-19 x 10^-6/°C) │
- │ │ │ │ │
- │ High Carbon Activity │ │ │ Low Carbon Activity │
- │ (Carbon donor phase) │ │ │ (High Cr = Carbon sink) │
- └─────────────────────────────┘ │ └─────────────────────────────┘
- ▼
- [THE FAILURE PLANE: FUSION LINE]
- The Three Fundamental Failure Drivers
DMW cracking is not caused by a single isolated variable, but rather by the synergistic interaction of three distinct metallurgical and thermodynamic driving forces: THE THREE SYNERGISTIC DMW FAILURE FORCES
[1. Thermal Expansion Mismatch] ──► Generates massive cyclic shear stresses
along the fusion boundary during swings.
[2. Solid-State Carbon Migration] ─► Creates a weak, soft decarburized zone
in the ferritic steel adjacent to fusion line.
[3. Interfacial Oxidation Notch] ──► Forms an external mechanical stress riser
accelerating crack nucleation.
1. Thermal Expansion Coefficient (alpha) Mismatch and Cyclic Shear Stress
Physical Disparity : The primary mechanical driver of DMW cracking is the vast disparity in the mean Coefficient of Thermal Expansion (CTE, alpha) between ferritic/martensitic steels and austenitic stainless steels:
Ferritic/Cr-Mo Steels (BCC): α ≈ 6.4 to 7.5 × 10 − 6 in/in/ ∘ F \alpha \approx 6.4 \text{ to } 7.5 \times 10^{-6}\text{ in/in/}^\circ\text{F} α ≈ 6.4 to 7.5 × 1 0 − 6 in/in/ ∘ F ( 11.5 to 13.5 × 10 − 6 mm/mm/ ∘ C 11.5 \text{ to } 13.5 \times 10^{-6}\text{ mm/mm/}^\circ\text{C} 11.5 to 13.5 × 1 0 − 6 mm/mm/ ∘ C );
Austenitic Stainless Steels (FCC): α ≈ 9.5 to 10.5 × 10 − 6 in/in/ ∘ F \alpha \approx 9.5 \text{ to } 10.5 \times 10^{-6}\text{ in/in/}^\circ\text{F} α ≈ 9.5 to 10.5 × 1 0 − 6 in/in/ ∘ F ( 17.0 to 19.0 × 10 − 6 mm/mm/ ∘ C 17.0 \text{ to } 19.0 \times 10^{-6}\text{ mm/mm/}^\circ\text{C} 17.0 to 19.0 × 1 0 − 6 mm/mm/ ∘ C ).
The Stress Field : API RP 571 notes that 300 series stainless steel has a thermal expansion coefficient about 25% to 30% greater than carbon or low alloy steel (the exact mismatch depends on the temperature range). Whenever a DMW is heated to operating temperatures (>800 °F to 1000 °F / 427 °C to 538 °C) or cooled to ambient during shutdown, this differential expansion generates immense cyclic shear and normal stresses concentrated within a microscopic zone of a few microns along the fusion line .
Thermal Fatigue Synergism : In cycling services (peaking power boilers, batch chemical units, daily temperature swings), this thermal strain differential drives cyclic creep-fatigue damage along the interface.
2. Carbon Migration and the Decarburization/Carburization Couple
Thermodynamic Driving Force : The second critical driver is solid-state elemental diffusion. Carbon diffusion is driven not simply by carbon concentration differences, but by the chemical potential (activity) gradient of carbon: μ C = μ C 0 + R T ln ( a C ) \mu_C = \mu_C^0 + R T \ln(a_C) μ C = μ C 0 + RT ln ( a C ) Chromium is a powerful carbide-forming element that dramatically lowers the chemical activity ( a C a_C a C ) of carbon in solid solution. Low-alloy ferritic steels (e.g., 2.25Cr-1Mo) contain 2.25 wt% Cr, whereas austenitic weld metals (e.g., Type 309 stainless steel) contain 23% to 25% Cr. Consequently, the chemical activity of carbon in the ferritic base metal is vastly higher than in the austenitic weld metal.
The Diffusion Phenomenon : At operating temperatures above 800 °F to 900 °F (427 °C to 482 °C) —or during post-weld heat treatment (PWHT)—carbon atoms spontaneously migrate across the fusion boundary down this chemical potential gradient, exiting the ferritic steel and entering the high-chromium austenitic weld metal.
The Two Microstructural Zones :
The Decarburized Zone (Ferritic Side) : A narrow band (typically 0.005 to 0.050 inches / 0.1 to 1.3 mm wide) in the ferritic steel immediately adjacent to the fusion boundary is completely stripped of carbon. Without carbon to form reinforcing carbides or pearlite/bainite, this zone converts to pure, soft polygonal alpha-ferrite . Its room-temperature and high-temperature creep strength plummet, and its hardness drops drastically (often below 110 to 120 HB ).
The Carburized Zone (Austenitic Side) : Immediately across the fusion line, migrating carbon encounters concentrated chromium (>20 wt%) and precipitates as a dense, continuous planar band of brittle chromium carbides ( ( Fe,Cr ) 23 C 6 (\text{Fe,Cr})_{23}\text{C}_6 ( Fe,Cr ) 23 C 6 and ( Fe,Cr ) 7 C 3 (\text{Fe,Cr})_7\text{C}_3 ( Fe,Cr ) 7 C 3 ). This carburized band exhibits extreme localized hardness (frequently exceeding 350 to 450 HV ) and virtually zero ductility. MICROSTRUCTURAL CROSS-SECTION OF A DMW FUSION LINE
- FERRITIC BASE METAL (2.25Cr-1Mo) │ AUSTENITIC WELD METAL (E309)
- ┌───────────────────────────────────┐ │ ┌───────────────────────────────────┐
- │ │ │ │ │
- │ Bulk Tempered Bainite │ │ │ Dendritic Austenite Matrix │
- │ Hardness: ~180-210 HB │ │ │ Hardness: ~190-220 HB │
- │ │ │ │ │
- │ DECARBURIZED FERRITE BAND │ │ │ CARBURIZED CARBIDE BAND │
- │ • Carbon stripped away │ │ │ • Massive (Fe,Cr)23C6 carbides │
- │ • Soft, coarse polygonal Fe │ │ │ • Hardness: >380-450 HV │
- │ • Hardness: <110-120 HB │ │ │ • Severe planar embrittlement │
- │ • Creep voids nucleate here! │ │ │ │
- └───────────────────────────────────┘ │ └───────────────────────────────────┘
- │
- FUSION LINE
- [Cracking Interface]
- 3. Accelerated Interfacial Oxidation and Notching
At elevated temperatures, low-alloy ferritic steel oxidizes significantly faster than highly alloyed austenitic stainless steel. At the exposed outer (OD) or inner (ID) surface where the fusion line meets the atmosphere or flue gas, preferential oxidation attacks the weak decarburized ferrite, carving a sharp V-shaped oxide notch . This notch acts as a localized stress riser that concentrates cyclic thermal expansion strains, accelerating crack initiation.
Crack Morphology and Propagation Path DMW CRACK MORPHOLOGY AND PATHWAY
- OD Surface Oxide Notch
- ▼
- ═════════╗ ╔═══════════════════════════════════════════════════════
- Ferritic ║ ║ Austenitic
- Base ║ ║ Weld Metal
- Metal ║ ║ (309SS)
- ║ ║
- ║ ║◄─── Crack initiates at surface notch and propagates
- ║ ║ strictly within the narrow decarburized ferrite band,
- ║ ║ parallel to and 1 to 2 grain diameters away from
║ ║ the hard chromium carbide fusion line.
- ║ ║
- ║ ║
- ═════════╝ ╚═══════════════════════════════════════════════════════
- ID Surface
Fracture Path : DMW cracking propagates almost exclusively within the weak decarburized ferrite layer of the ferritic base metal , running parallel to the fusion boundary and typically separated from the weld metal by only a fraction of a millimeter. The crack rarely penetrates into the tough austenitic weld metal or deep into the bulk ferritic base metal.
Macroscopic Appearance : The fracture surface is extraordinarily flat, smooth, and featureless, closely mimicking a brittle cleavage failure. There is zero macroscopic necking or wall thinning, even though the decarburized ferrite matrix is intrinsically soft and ductile. The failure gives little or no structural warning prior to sudden, complete through-wall separation.
Microscopic Features (Metallography) :
Microscopic examination reveals that cracking initiates via the coalescence of creep micro-cavities formed along grain boundaries in the decarburized ferrite band under cyclic shear and tensile stresses.
In thermal cycling applications, fracture faces display characteristic fatigue striations and beachmarks superimposed on creep cavitation, confirming a creep-fatigue interaction mechanism.
Comparison of Filler Metals: Stainless Steel vs. Nickel-Base Alloys
The choice of welding consumable is the single most critical factor dictating DMW service life. Historically, fabricators used austenitic stainless steel electrodes (such as AWS E309 or ER309L). For elevated-temperature service, RP 571 notes that nickel-base filler metals , whose thermal expansion is closer to that of carbon and low alloy steels, can dramatically increase joint life above about 800 °F (427 °C):
Engineering Characteristic Austenitic Stainless Filler Metal (e.g., E309 / ER309L) Nickel-Base Filler Metal (e.g., ERNiCr-3 / Alloy 82, ENiCrFe-3 / Alloy 182) High-Moly Nickel Filler Metal (e.g., ERNiCrMo-3 / Alloy 625)
Nominal Chemical Composition 23Cr-12Ni-Fe balance 72Ni-20Cr-3Mn-2.5Nb-Fe balance 60Ni-22Cr-9Mo-3.5Nb-Fe balance
Thermal Expansion Coefficient (alpha) 17.5 x 10^-6 / °C (High mismatch vs. ferritic 12.0 x 10^-6 / °C) 14.0 x 10^-6 / °C (Intermediate CTE; splits the difference) 13.5 x 10^-6 / °C (Closely matches ferritic Cr-Mo base steels)
Carbon Migration Susceptibility Severe : Immense chromium reservoir strips carbon from ferritic steel above 800 °F Negligible : Nickel suppresses carbon solubility; prevents carbon migration across boundary Zero : No carbon activity gradient; completely suppresses decarburization
Decarburized Layer Formation Prominent, deep decarburized ferrite band formed within 1,000 to 5,000 hours Virtually absent; no structural softening or carbide agglomeration Absent; microstructural stability maintained up to 1200 °F (649 °C)
Expected Service Life in Hot Cyclic Service Poor : Frequent premature failure within 30,000 to 70,000 operating hours Superior : Typically exceeds 150,000 to 200,000+ operating hours Maximum : Ideal for severe cyclic thermal stress and heavy wall sections
Affected Equipment and Process Units COMMON INDUSTRIAL DMW CRACKING LOCATIONS
- 1. Boiler Superheaters / Reheaters 2. Refinery Fired Heaters
- ┌────────────────────────────────────┐ ┌────────────────────────────────────┐
- │ • SA-213 T22 (2.25Cr-1Mo) tubes │ │ • Transfer line transitions │
- │ welded to TP304H / TP347H tubes │ │ • Radiant coils to crossover │
- │ • Operating at 1000 °F - 1100 °F │ │ • Heavy cyclic firing conditions │
- │ • Flue gas external oxidation │ │ • High thermal expansion loads │
- └────────────────────────────────────┘ └────────────────────────────────────┘
- 3. Hydroprocessing Reactor Nozzles
- ┌────────────────────────────────────┐
- │ • 2.25Cr-1Mo reactor shell nozzles │
- │ welded to 321/347 stainless pipe │
- │ • High-pressure hydrogen service │
- │ • Heavy-wall section constraints │
- └────────────────────────────────────┘
- 1. Fossil-Fired Power Boilers and Heat Recovery Steam Generators (HRSG)
Superheater and Reheater Tubing : Fossil utility boilers utilize 2.25Cr-1Mo (SA-213 T22) or 9Cr-1Mo-V (SA-213 T91) tubing in cooler convection banks, but transition to austenitic stainless steel (SA-213 TP304H, TP321H, TP347H) in hotter superheater and reheater finishing sections operating at 1000 °F to 1100 °F (538 °C to 593 °C) .
Failure History : Early boilers fabricated with stainless steel weld metal (Type 309) experienced widespread tubing failures after 5 to 10 years of service, prompting the wholesale conversion to nickel-base weld metal.
2. Refinery Fired Heaters and Steam Methane Reformers (SMR)
Radiant Tube Outlets and Crossover Spools : Delayed coker, crude furnace, and catalytic reforming heaters employ DMWs where ferritic tubes meet high-alloy transfer lines.
Steam Methane Reformer Harvester Manifolds : Transitions connecting centrifugally cast 25Cr-35Ni micro-alloy reformer tubes to 800H or Cr-Mo collection headers.
3. Hydrocracker and Hydrotreater Reactor Nozzles
Heavy-wall 2.25Cr-1Mo and 2.25Cr-1Mo-0.25V pressure vessels feature nozzles joined to solid 300-series austenitic stainless steel process piping. Due to wall thicknesses exceeding 2 to 4 inches (50 to 100 mm), bending and axial piping thrust create severe triaxial constraint across the DMW joint.
Prevention, Mitigation, and Engineering Design DMW CRACKING MITIGATION STRATEGY
- Filler Metal Selection Joint Design & Mechanics
- ┌──────────────────────────────────┐ ┌──────────────────────────────────┐
- │ • NEVER use stainless filler │ │ • Relocate DMWs outside hot │
- │ (E309) for service >800 °F │ │ fireboxes to cooler zones │
- │ • Mandate nickel-base fillers: │ │ • Install shop-fabricated graded │
- │ Alloy 82 (GTAW/GMAW), │ │ transition spools (co-extruded)│
- │ Alloy 182 (SMAW), Alloy 625 │ │ • Add external piping supports to│
- │ • Butter ferritic side with Ni │ │ eliminate bending moments │
- │ filler and PWHT before welding │ │ • Minimize thermal cycling rates │
- └──────────────────────────────────┘ └──────────────────────────────────┘
- 1. Mandatory Nickel-Base Consumables
For service temperatures above about 800 °F (427 °C) , prefer nickel-base consumables over austenitic stainless steel consumables (AWS E309/ER309):
- ERNiCr-3 (Alloy 82) for Gas Tungsten Arc Welding (GTAW) and Gas Metal Arc Welding (GMAW);
- ENiCrFe-3 (Alloy 182) for Shielded Metal Arc Welding (SMAW);
ERNiCrMo-3 (Alloy 625) for advanced high-stress and cyclic applications.
2. Buttering Technique and PWHT Sequencing
When joining ferritic steel that legally requires Post-Weld Heat Treatment (such as 2.25Cr-1Mo) to austenitic stainless steel that can be sensitized by PWHT:
The joint bevel on the ferritic component is buttered with a minimum two-layer deposit of nickel-base weld metal (Alloy 82 or Alloy 182).
The buttered ferritic component is subjected to full code PWHT (1250 °F to 1350 °F / 676 °C to 732 °C) . Because the nickel weld metal does not suffer carbon migration or sensitization, it acts as an inert metallurgical barrier.
The final completion weld joining the buttered face to the austenitic stainless steel component is deposited with nickel-base filler without subsequent PWHT , avoiding harmful carbide precipitation and sensitization in the stainless steel.
3. Graded Transition Spools and Joint Geometry
Co-Extruded / Explosively Bonded Transition Spools : Utilize shop-fabricated transition joints manufactured under factory conditions via friction welding, explosive bonding, or co-extrusion, which exhibit optimized interfacial metallurgy.
Physical Relocation : In fired heaters and boilers, locate DMW transitions in cold penthouses or lower-temperature zones outside the radiant firebox whenever feasible.
Mechanical Load Relief : Support piping systems to minimize bending moments, thermal thrust, and sustained mechanical loads on DMW joints.
Inspection and Non-Destructive Examination (NDE)
Inspecting DMWs presents one of the most formidable challenges in non-destructive examination due to the dramatic acoustic, electrical, and metallurgical discontinuities across the weld boundary: ACOUSTIC CHALLENGES IN DMW ULTRASONICS
- Ferritic Base Metal (BCC) Austenitic / Nickel Weld Metal (FCC)
- ┌─────────────────────────────┐ ┌─────────────────────────────┐
- │ • Fine, equiaxed grains │ FUSION │ • Coarse, columnar dendrites │
- │ • Isotropic acoustic speed │ LINE │ • Highly anisotropic speed │
- │ • Velocity: ~5,900 m/s │ │ │ • Velocity: ~5,400-5,700 m/s │
- │ • Low acoustic attenuation │ │ │ • Severe beam scattering │
- └─────────────────────────────┘ │ └─────────────────────────────┘
- ▼
- [BEAM REFRACTION, SPLITTING, & SKEWING]
Inspection Technique Defect Detection Capability Operating Principle & Field Execution Limitations
Profile Radiographic Testing (PRT) Primary method for tubing ; detects OD/ID oxide notching and open cracks High-energy tangential exposure across tube wall reveals planar crack depth and profile Limited to tubing <= 4 in diameter; cannot detect tight, non-separated microcracks
Specialized Ultrasonic Testing (UT / PAUT) Deep volumetric detection; fusion line micro-cracking Utilizes Transmit-Receive Longitudinal (TRL) wave probes and low-frequency (1.5 to 2.25 MHz) phased array Conventional shear-wave UT fails completely due to acoustic scattering and beam refraction
Liquid Penetrant Testing (PT) Surface-connected cracks on austenitic weld face and ID Solvent-removable or post-emulsified dye penetrant applied to cleaned weld face Detects only surface-breaking defects; insensitive to subsurface fusion line cracks
Magnetic Particle Testing (MT / WFMT) Surface cracks on ferritic base metal side Dry powder MT or Wet Fluorescent MT applied to the ferritic HAZ Non-applicable to the austenitic or nickel weld metal (non-magnetic)