Study guide

17.2 Liquid Metal Embrittlement (LME)

API 571 Corrosion and Materials Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Structure, Terminology & Corrosion Fundamentals

1.1 API 571 Certification, Exam Structure & RP 571 Framework 1.2 Corrosion Science Fundamentals: Electrochemical Cells, Polarization & Passivity 1.3 Key Process Variables, Morphology Patterns & NDE Terminology

2 Chapter 2: Atmospheric, Water & Soil Corrosion

2.1 Atmospheric Corrosion & Soil Corrosion 2.2 Corrosion Under Insulation (CUI) 2.3 Cooling Water, Boiler Water & Oxygenated Process Water Corrosion

3 Chapter 3: Microbial, Electrochemical & Velocity-Induced Metal Loss

3.1 Microbiologically Influenced Corrosion (MIC) & Brine Corrosion 3.2 Galvanic Corrosion, Concentration Cell Corrosion & Dealloying 3.3 Erosion/Erosion-Corrosion & Cavitation

4 Chapter 4: Refining Sour Water & Overhead Systems Corrosion

4.1 Acidic Sour Water & Alkaline Sour Water (Ammonium Bisulfide) Corrosion 4.2 Ammonium Chloride and Amine Hydrochloride Corrosion 4.3 Flue Gas Dew Point Corrosion & Aqueous Organic Acid Corrosion

5 Chapter 5: Acid Gas, Amine & Mineral Acid Systems

5.1 Amine Corrosion & Carbon Dioxide (CO2) Sweet Corrosion 5.2 Hydrochloric Acid (HCl) Corrosion & Phenol Corrosion 5.3 Caustic Corrosion (Caustic Gouging)

6 Chapter 6: Heavy Oil, Alkylation & Specialty Acid Services

6.1 Naphthenic Acid Corrosion (NAC) 6.2 Sulfuric Acid Corrosion & Phosphoric Acid Corrosion 6.3 Hydrofluoric (HF) Acid Corrosion

7 Chapter 7: High-Temperature Oxidation & Sulfidation

7.1 High-Temperature Oxidation 7.2 Sulfidation in H2-Free Environments 7.3 High-Temperature H2/H2S Corrosion (Couper-Gorman)

8 Chapter 8: High-Temperature Carbon, Nitrogen & Ash Reactions

8.1 Carburization, Decarburization & Metal Dusting 8.2 Nitriding, Fuel Ash Corrosion & Refractory Degradation 8.3 Gaseous Oxygen-Enhanced Ignition and Combustion

9 Chapter 9: High-Temperature Hydrogen Attack & High-Temp Rupture

9.1 High-Temperature Hydrogen Attack (HTHA) Mechanisms & Nelson Curves 9.2 HTHA Inspection, Detection Methods & Mitigation 9.3 Creep, Stress Rupture & Short-Term Overheating

10 Chapter 10: Wet H2S Cracking Mechanisms

10.1 Hydrogen Blistering & Hydrogen-Induced Cracking (HIC) 10.2 Stress-Oriented Hydrogen-Induced Cracking (SOHIC) 10.3 Sulfide Stress Cracking (SSC)

11 Chapter 11: Stainless Steel & Nickel Alloy Stress Corrosion Cracking

11.1 Chloride Stress Corrosion Cracking (Cl- SCC) 11.2 Polythionic Acid Stress Corrosion Cracking (PASCC) 11.3 Caustic Stress Corrosion Cracking (Caustic Embrittlement)

12 Chapter 12: Environmental Cracking in Chemical & Refining Services

12.1 Amine Stress Corrosion Cracking 12.2 Carbonate Stress Corrosion Cracking & Ammonia SCC 12.3 HF Cracking (HSC & HF SCC of Ni Alloys) & Ethanol SCC

13 Chapter 13: Mechanical, Thermal & Corrosion Fatigue

13.1 Mechanical and Vibration-Induced Fatigue 13.2 Thermal Fatigue & Thermal Shock 13.3 Corrosion Fatigue

14 Chapter 14: Metallurgical Phase Embrittlement & Cast Iron Degradation

14.1 885 °F (475 °C) Embrittlement 14.2 Sigma Phase Embrittlement 14.3 Graphitic Corrosion of Cast Irons

15 Chapter 15: Thermal Degradation of Microstructure & Grain Structure

15.1 Graphitization 15.2 Spheroidization (Softening) 15.3 Temper Embrittlement & Strain Aging

16 Chapter 16: Toughness Loss, Welding & Dissimilar Metal Cracking

16.1 Brittle Fracture 16.2 Dissimilar Metal Weld (DMW) Cracking 16.3 Stress Relaxation Cracking (Reheat Cracking)

17 Chapter 17: Environmental Embrittlement & Specialized Hydriding

17.1 Hydrogen Embrittlement (HE) 17.2 Liquid Metal Embrittlement (LME) 17.3 Titanium Hydriding

17.2 Liquid Metal Embrittlement (LME)

Key Takeaways Explain This Topic AI

Liquid Metal Embrittlement (LME, API RP 571 Section 3.42) is the catastrophic, instantaneous intergranular brittle cracking of an otherwise ductile solid metal or alloy resulting from exposure to a liquid (molten) metal while under tensile stress.

LME occurs at crack propagation velocities reaching meters per second (100 to 10,000 mm/s) due to stress-assisted capillary wetting of grain boundaries and the drastic reduction of surface energy and interatomic cohesive strength.

The primary refining and petrochemical LME couples include Mercury (Hg) on Aluminum and Copper alloys, Molten Zinc (Zn) on Austenitic Stainless Steels, Molten Cadmium (Cd) on High-Strength Steels, and Molten Lead (Pb) on Copper/Nickel alloys.

Zinc embrittlement of 300-series austenitic stainless steel occurs during fires or welding when galvanized steel pipe supports, galvanized wire, or zinc-rich paint melts above 787 °F (420 °C), driving through-wall penetration in seconds.

Cryogenic Brazed Aluminum Heat Exchangers (BAHXs) in LNG and gas plants are vulnerable to mercury embrittlement from trace wellhead Hg; protection requires upstream sulfur-impregnated activated carbon guard beds scrubbing Hg below 0.01 µg/Nm³.

Last updated: September 2026

  • Fundamental Mechanism & Physics of Liquid Metal Embrittlement
  • 1. Phenomenological Description (API RP 571 Section 3.42)

Liquid Metal Embrittlement (LME) , also referred to as Liquid Metal Assisted Cracking (LMAC) , is an exceptionally rapid and catastrophic environmental degradation mechanism. It occurs when an ordinarily ductile solid metal or alloy undergoes instantaneous brittle fracture while subjected to sustained or transient tensile stress in direct physical contact with a specific molten (liquid) low-melting-point metal.

LME is distinct from conventional corrosion or dissolution processes. In standard electrochemical corrosion, metal atoms are oxidized and dissolved into an electrolyte over days, months, or years. In LME, chemical dissolution is minimal or non-existent; instead, the physical presence of a monolayer of molten metal atoms at a stressed crack tip causes catastrophic intergranular cleavage across entire structural cross-sections in milliseconds to seconds .

2. The Triad of Mandatory Conditions

For Liquid Metal Embrittlement to occur, three specific criteria must be satisfied simultaneously:

A Specific Metallurgical Couple : Not all liquid metals embrittle all solid metals. LME is highly specific to distinct pairs characterized by low mutual solid solubility and limited intermetallic compound formation at the operating temperature (e.g., liquid mercury on solid aluminum, liquid zinc on solid austenitic stainless steel).

Direct Wetting and Oxide Barrier Disruption : The molten metal must directly wet the solid metal substrate. Stable, protective surface oxide films (such as the tenacious alumina layer on aluminum or the chromium oxide passive film on stainless steel) naturally prevent LME by physically barring liquid metal contact. However, if the oxide film is mechanically scratched, ruptured by tensile strain, or chemically dissolved by flux or halides, spontaneous wetting occurs.

Tensile Stress (Applied or Residual) : Tensile stress is mandatory to open crack mouths and concentrate triaxial stresses at grain boundaries. This stress can originate from internal operating pressure, piping thermal expansion, fit-up misalignment, or un-relieved welding residual stresses. LIQUID METAL EMBRITTLEMENT TRIAD

  • ┌──────────────────────────────┐
  • │ Specific Metal Couple │
  • │ (e.g., Hg-Al, Zn-Austenitic)│
  • └──────────────┬───────────────┘
  • │
  • ▼
  • ┌──────────────────────────────────────────────────────┐
  • │ INSTANTANEOUS LME CRACKING │
  • │ Crack velocities: 0.1 to 10 meters per second │
  • │ Zero gross plastic deformation / necking │
  • └──────────────────────┬───────────────────────────────┘
  • ▲
  • ┌───────────────┴───────────────┐
  • │ │
  • ┌────────────┴─────────────────┐ ┌─────────┴────────────────────┐
  • │ Complete Surface Wetting │ │ Sustained Tensile Stress │
  • │ (Capillary grain boundary │ │ (Applied operating load, │
  • │ penetration / oxide breach) │ │ thermal, or residual weld) │
  • └──────────────────────────────┘ └──────────────────────────────┘
  • 3. Thermodynamics of Capillary Wetting and Crack Propagation Kinetics

The driving physical mechanism of LME is governed by surface thermodynamics and capillary kinetics:

Wetting and Dihedral Angle : The wetting tendency is defined by the interfacial energy balance (Young-Dupré relationship): γ_gb = 2 · γ_sl · cos(θ/2), where γ_gb is the solid-solid grain boundary energy, γ_sl is the solid-liquid interfacial energy, and θ is the dihedral angle. When a liquid metal exhibits high chemical affinity for grain boundaries, γ_sl drops to near zero, forcing the dihedral angle θ toward 0°. The liquid metal spreads spontaneously along the grain boundary.

Capillary Grain Boundary Penetration : Driven by capillary action, molten metal atoms rapidly penetrate ahead of the crack tip. The rate of liquid transport along grain boundaries is accelerated by orders of magnitude under the influence of an applied tensile stress field.

Reduction of Cohesive Bond Energy : Adsorption of liquid metal atoms at the crack tip alters the electronic orbital overlap of the solid metal atoms, drastically lowering the interatomic bond cohesive strength. The local stress required to separate solid metal atoms along the grain boundary drops below the shear stress required for dislocation slip.

Phenomenal Crack Velocity : Because cracking does not require mass dissolution or macroscopic diffusion through the bulk crystal lattice, LME cracks propagate at speeds between 0.1 and 10 meters per second (100 to 10,000 mm/s) —essentially the speed of sound in the fluid-filled micro-crack.

Loading diagram... Liquid Metal Embrittlement Progression: Industrial Couples, Wetting Dynamics, and Rupture

  • Primary Liquid Metal Couples in Refining and Petrochemical Operations
  • 1. Mercury (Hg) Embrittlement of Aluminum and Copper Alloys

Industrial Vulnerability : Occurs primarily in cryogenic gas processing plants, Liquefied Natural Gas (LNG) baseload liquefaction trains, and ethylene plant cold recovery sections utilizing Brazed Aluminum Heat Exchangers (BAHXs) , commonly known as "cold boxes".

Mercury Presence in Feedstocks : Elemental mercury is a naturally occurring contaminant in many natural gas and crude oil reservoirs worldwide (e.g., Southeast Asia, South America, North Sea, North Africa). Wellhead concentrations range from <0.01 µg/Nm³ to >100 µg/Nm³. During gas chilling, mercury condenses from the vapor phase into liquid metallic droplets.

Mechanism : Mercury is liquid at ambient temperatures (freezing point: -38.8 °C / -37.8 °F ; boiling point: 356.7 °C / 674.1 °F ). While the dry, intact Al2O3 oxide film on aluminum resists liquid mercury, operational thermal cycling, pressure flexing, or trace moisture containing halides breaches this film. Liquid mercury amalgamates with aluminum, wet-penetrating along the grain boundaries of 3000-series (fin stock), 5000-series (piping/nozzles), and 6000-series (parting sheets) aluminum alloys, causing sudden, catastrophic rupture under normal operating pressures.

Copper and Nickel-Copper Alloys : Copper-base alloys (admiralty brass, aluminum bronze) and nickel-copper Monel 400 are also susceptible to mercury LME. Historically, refinery crude overhead condensers tubed with brass failed rapidly when processing mercury-contaminated crudes.

2. Molten Zinc (Zn) Embrittlement of Austenitic Stainless Steels

Industrial Vulnerability : Represents one of the most severe hazards during plant fires or welding operations in refinery and chemical process piping.

Zinc Melting Point : Elemental zinc melts at 787 °F (420 °C) .

Scenario 1: External Fire Incidents : When a process fire engulfs 300-series austenitic stainless steel piping (Types 304, 304L, 316, 316L, 321, 347), molten zinc drips from adjacent galvanized steel components (such as galvanized structural steel beams, pipe hangers, galvanized steel grating, galvanized insulation jacketing, or galvanized tie-wires). When molten zinc contacts the hot, pressurized stainless steel pipe (>787 °F), it instantaneously wets the austenite grain boundaries and forms brittle Fe-Zn and Ni-Zn intermetallic phases. The pipe wall is breached in seconds , spraying pressurized hydrocarbon contents directly into the fire and converting a manageable fire into an uncontrollable explosion.

Scenario 2: Welding Contamination : If welders strike an arc or make a repair weld on stainless steel that has been contaminated with zinc-rich primer paint, or if galvanized support lugs are directly welded to stainless steel piping without grinding away the zinc coating, molten zinc penetrates the weld heat-affected zone, causing extensive through-wall cracking during the welding pass.

3. Molten Cadmium (Cd) on High-Strength Steels

Industrial Vulnerability : High-strength bolting (ASTM A193 Grade B7, B16, AISI 4140, 4340) in elevated-temperature refinery service.

Cadmium Melting Point : Cadmium melts at 610 °F (321 °C) .

Mechanism : Cadmium-electroplated fasteners or cadmium-plated rigging tools exposed to process temperatures exceeding 600 °F suffer catastrophic intergranular LME. Even below cadmium's bulk melting point, Solid Metal Induced Embrittlement (SMIE) can occur at temperatures as low as 400 °F (204 °C) due to surface self-diffusion of cadmium atoms under high bolt torque stresses. Cadmium-plated bolting is strictly prohibited on process equipment operating above 400 °F.

4. Molten Lead (Pb) on Copper and Nickel Alloys

Industrial Vulnerability : Leaded copper alloys, admiralty brasses, and nickel alloys exposed to molten lead or high-temperature lead solder.

Lead Melting Point : Elemental lead melts at 621 °F (327 °C) .

Mechanism : High-temperature brazing or welding on leaded brasses causes intergranular molten lead penetration, resulting in immediate parting of flanges or tube sheets during fabrication or thermal excursions.

  • Morphology, Prevention Strategies & Non-Destructive Examination
  • 1. Crack Morphology and Fractography

Exclusively Intergranular : LME cracks propagate almost entirely along grain boundaries (prior austenite grain boundaries in steels; alpha grain boundaries in aluminum and brass). Transgranular cracking is rare and observed only in isolated single crystals.

Deep, Highly Branched Networks : Cracks exhibit extensive secondary branching following the three-dimensional grain boundary network.

Zero Plastic Deformation : Macroscopic inspection reveals a complete absence of ductility—no necking, thinning, or shear lips are present. Tensile test specimens embrittled by liquid metal fail with flat, knife-edge, intergranular fractures despite exhibiting >30% elongation in air.

Liquid Metal Residue on Crack Faces : Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) show that crack fracture faces are coated with a thin film or microscopic droplets of the offending liquid metal, frequently accompanied by characteristic brittle intermetallic phases (such as FeZn13, NiZn3, or Al3Hg). LME CRACK MORPHOLOGY

  • Tensile Stress (σ) ▲
  • │
  • ─────────────────────┴─────────────────────── Metal Surface
  • │ │ │
  • ╱ ╲ ╱ ╲ ╱ ╲ Intergranular
  • │ ╲ │ ╲ │ ╲ Wetting by
  • ╲ │ ╲ │ ╲ │ Liquid Metal
  • │ ╲ │ ╲ │ ╲
  • ╱ │ ╱ │ ╱ │ Highly Branched
  • │ │ │ │ │ │ Crack Network
  • ─────────────────────────────────────────────
  • │
  • Tensile Stress (σ) ▼
  • 2. Engineering Prevention and Mitigation Protocols

Process / Asset Mitigation & Prevention Mandate Technical Basis & Standards Protocol

Cryogenic Cold Boxes (BAHXs) Install upstream Mercury Removal Units (MRUs) containing non-regenerable sulfur-impregnated activated carbon or metal sulfide beds (e.g., CuS on alumina). Reduces elemental mercury in gas feedstocks to <0.01 µg/Nm³ (often <0.001 µg/Nm³), preventing mercury accumulation and condensation in cryogenic aluminum passages.

BAHX Decontamination If mercury ingress occurs, execute controlled chemical amalgam removal or low-temperature dry gas purging; avoid water washing that creates corrosive amalgams. Prevents water-accelerated aluminum corrosion (2Al + 6H2O -> 2Al[OH]3 + 3H2 in the presence of Hg) which generates voluminous oxide scale and destroys exchanger cores.

Austenitic SS Piping vs Galvanized Steel Prohibit direct contact between galvanized steel supports/hangers and 300-series stainless steel piping operating >400 °F (204 °C) or exposed to fire risk. Mandate non-metallic isolation pads (elastomer/PTFE) or stainless steel wear pads. Prohibit galvanized tie-wires and galvanized insulation banding on stainless piping.

Welding Preparation Controls Mechanically grind away all galvanized coatings, zinc-rich primer paints, or cadmium plating for a minimum of 1 to 2 inches (25 to 50 mm) from weld bevels. Eliminates zinc/cadmium vaporization and melt penetration into the weld pool and heat-affected zone during arc welding.

Fastener Specification Prohibit cadmium-plated fasteners in service temperatures exceeding 400 °F (204 °C) . Use bare alloy steel, PTFE-coated fasteners, or zinc-nickel electroplate conforming to ASTM specifications designed for elevated-temperature service.

3. Non-Destructive Examination (NDE) Methodologies

Liquid Penetrant Testing (PT) : The most effective surface method for detecting fine, tight, branched LME cracks in non-ferromagnetic materials (aluminum cold box headers, austenitic stainless steel piping, and copper-nickel alloys). High-sensitivity fluorescent penetrant (Level 3 or 4) is required.

Eddy Current Testing (ECT) : Employed for non-ferrous heat exchanger tubing and thin-wall aluminum plate surfaces; highly sensitive to tight surface-breaking intergranular defects.

Radiographic Testing (RT) : Profile radiography can detect through-wall intergranular cracking in small-bore piping and exchanger nozzles; however, tight cracks oriented perpendicular to the radiation beam can be missed.

Positive Material Identification (PMI) / X-Ray Fluorescence (XRF) : Essential field screening tool to identify galvanized components, zinc-rich coatings, or cadmium-plated fasteners before they are inadvertently installed in high-temperature or stainless steel service.