Study guide

5.2 Pedicure Tub and Spa Disinfection

Arkansas Nail Technician Manicurist

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Arkansas Manicurist Exam Facts 1.2 Eligibility, Training Hours, and Student Registration 1.3 Written, State Law, and Practical Scheduling and Scoring

2 Arkansas License Identity and Scope of Practice

2.1 Who Licenses Arkansas Manicurists 2.2 Legal Definition and Scope of Manicuring 2.3 Where You May Practice, Display, and Address Changes

3 Infection Control Science

3.1 How Disease and Infection Are Caused and Transmitted 3.2 Levels of Infection Control 3.3 Infection-Control Process: Implements, Dispensing, Disposal, and Storage

4 Blood Exposure, Chemicals, and Workplace Safety

4.1 Blood Exposure Procedures 4.2 Safety Data Sheets, Adverse Reactions, and Chemical Storage 4.3 Ventilation, Harmful Ingredients, and Ergonomics

5 Arkansas Establishment Sanitation Rules

5.1 EPA Disinfectants, Wet Receptacles, and Implement Storage 5.2 Pedicure Tub and Spa Disinfection 5.3 Facility Requirements, Animals, Disease, and Posted Notices

6 Nail Anatomy, Growth, and Disorders

6.1 Parts and Functions of the Nail Unit 6.2 Nail Growth, Keratin, and Matrix Damage 6.3 Nail Disorders and Diseases: Signs, Symptoms, and Referral

7 Skin, Bones, and Muscles for Nail Services

7.1 Skin Structure of the Hands and Feet 7.2 Skin Disorders and Diseases of Hands and Feet 7.3 Bones, Muscles, and Joints of the Arms, Hands, Legs, and Feet

8 Chemistry of Nail Products

8.1 Purpose and Effects of Nail Product Ingredients 8.2 Physical Changes, Chemical Reactions, and Product Interactions 8.3 Harmful Ingredients, Overexposure, and Sensitization

9 Consultation, Contraindications, and Pre-Service

9.1 Client Consultation, Analysis, and Records 9.2 Conditions That Prohibit Service 9.3 Work-Area Setup and Pre-Service Sanitation

10 Nail Service Tools and Safe Use

10.1 Nail Equipment: Table, Lamp, Electric File, and Pedicure Basin 10.2 Nail Implements: Clippers, Pushers, Nippers, and Files 10.3 Supplies, Products, Labeling, and Safe Use

11 Manicure Procedures

11.1 Basic Water Manicure Sequence 11.2 Shaping, Cuticle Work, Buffing, and Polish 11.3 Massage Movements: Effleurage, Petrissage, Friction, and Tapotement

12 Pedicure, Add-On Services, and Post-Service

12.1 Basic Pedicure Sequence and Foot-File Safety 12.2 Paraffin, Exfoliation, and Thermal Add-On Services 12.3 Aftercare, Client Education, and Post-Service Disinfection

13 Nail Tips and Acrylics

13.1 Full-Well Nail Tip Application and Blending 13.2 Acrylic Liquid-and-Powder Application and Maintenance 13.3 Acrylic Removal and Natural-Nail Finish

14 Gels, Hybrid Systems, and Powder Dip

14.1 Soft, Hard, and Hybrid Gel Systems 14.2 Powder Dip Systems 14.3 Enhancement Troubleshooting

15 Practical Exam Performance

15.1 Arkansas Practical Format, Kit, and Labeling 15.2 Work Area Setup and New-Client Reset 15.3 Practical Manicure, Polish, and Full-Well Tip Tasks 15.4 Sculptured Nail, Removal, and Blood-Exposure Demonstration

16 Reciprocity, Renewal, Fees, and Enforcement

16.1 Reciprocity, Out-of-State Hours, and Military Paths 16.2 Renewal, Lapsed Licenses, and Lifetime Licenses 16.3 Fees, Inspections, Complaints, and Enforcement

5.2 Pedicure Tub and Spa Disinfection

Key Takeaways Explain This Topic AI

After each pedicure client, ADH requires: drain the tub; clean it per the manufacturer, removing film especially at the water line; rinse well; then fill and add disinfectant.

The ordinary minimum disinfectant is an EPA-registered bactericidal, virucidal, and fungicidal product mixed per directions; if the tub contacted blood or body fluids, use an EPA-registered disinfectant effective against HIV-1 and human Hepatitis B Virus.

Disinfectant must stand in a non-circulating tub and circulate in a circulating tub for the manufacturer’s contact time—that circulating versus standing distinction is the exam split.

At the end of the day, remove filters, screens, drains, and jets; scrub with a brush and soap; rinse; completely immerse in EPA bactericidal/virucidal/fungicidal solution (or the HIV-1/HBV-level product if blood was involved); rinse; air-dry; then replace or store in a disinfected, dry, covered container isolated from contaminants.

Last updated: September 2026

Why pedicure spas get their own protocol

ADH writes a dedicated standard for cleaning and disinfecting circulating and non-circulating tubs and spas for all industry modalities . Manicurists spend a large share of clinic time at the spa. Biofilm collects at the water line and inside jet housings. The Arkansas State Law exam treats this as a sequence question: after each client versus end of day, and standing disinfectant versus circulating disinfectant. NIC Nail Technology theory also tests infection control around pedicure equipment. Independent ExamFinch teaching here follows the ADH Cosmetology and Body Art Rules, not a shop shortcut that “looks clean.”

The rules recommend eye goggles and nitrile protective gloves during the chemical steps. Exposure of the client’s feet or other skin areas of the body to disinfectants should be avoided. Disinfection happens after the client has left the water, not while someone soaks in a treated tub.

Circulating versus non-circulating — the exam distinction

A non-circulating tub is a still basin: no jets, no pipe loop. After you add disinfectant to the filled tub, you allow the disinfectant to stand for the time specified according to the manufacturer’s instructions so every wetted surface stays wet long enough.

A circulating tub or spa moves water through jets, screens, and internal plumbing. Standing solution in the visible bowl does not treat the pipe interior. ADH therefore requires you allow the disinfectant to circulate for the manufacturer’s specified time.

If a question gives you a whirlpool and asks whether you “let it sit,” the rule answer is circulate . If it gives you a still soaking bowl, the rule answer is stand . Do not invent a single statewide minute number; contact time is the product label. Arkansas did not print a substitute clock in this section.

After each client or service

Follow this order. The letters match how ADH lists the steps, which is how a multiple-choice stem will often be written.

(a) Drain the tub. Do not “disinfect” a full dirty tub by dumping chemical on top of used soak water as a substitute for draining.

(b) Clean the tub according to the manufacturer’s instructions. Take special care to remove all film, especially at the water line . Rinse the tub well. The water-line ring is where soap, skin, and product dry into a film that blocks disinfectant. A shiny bowl with a gray ring still fails the clean step.

(c) Fill the tub with water and add the appropriate disinfectant:

At minimum , use an EPA-registered bactericidal, virucidal, and fungicidal disinfectant mixed and used according to the manufacturer’s directions — except tubs that have come in contact with blood or body fluids .

If a tub has come in contact with blood or body fluids , at minimum use an EPA-registered disinfectant that is effective against HIV-1 and human Hepatitis B Virus , mixed and used according to the manufacturer’s directions.

Then apply contact time by tub type: stand for non-circulating; circulate for circulating, for the time on the label.

The blood/body-fluid product is a chemical standard for a contaminated vessel . It is a different rule from the later facility language that says HIV, by itself, is not treated as a communicable disease that automatically bars a person from ordinary cosmetology services. Do not merge those two sentences on the exam. One is about what you pour into a bloody tub. The other is about whether a person may sit in your chair.

Manufacturer directions still control mix and time. “EPA-registered” is not a license to guess the dilution. Too weak fails pathogens. Too strong can damage equipment and is still not “per directions.” If the label requires a measured capful per gallon, eyeballing “a splash” is not the rule.

  • Step After each client or service End of day — removable parts
  • First action Drain the tub Remove filters, screens, drains, jets, and similar parts

Clean Manufacturer instructions; remove film especially at the water line; rinse well Scrub with a brush and soap or detergent until free from debris; rinse

Disinfectant Fill with water; EPA bactericidal/virucidal/fungicidal unless blood/body fluid, then HIV-1 and hepatitis B Virus product Completely immerse in EPA bactericidal/virucidal/fungicidal solution mixed per directions (HIV-1/HBV-level if blood was involved)

Contact method Stand in non-circulating tubs; circulate in circulating tubs for label time Immersion for the manufacturer’s time

Finish Complete label contact time before the next fill Rinse, air-dry, then replace into the tub or store in a disinfected, dry, covered container isolated from contaminants

End of the day: removable parts

After-each-client bowl work does not replace closing work on the pieces that trap debris. At the end of the day, remove all removable parts (filters, screens, drains, jets, and similar pieces) and clean and disinfect them as follows:

Scrub with a brush and soap or detergent until free from debris.

Rinse.

Completely immerse in an EPA-registered bactericidal, virucidal, and fungicidal disinfectant mixed and used according to the manufacturer’s directions. If those parts sat in a blood or body-fluid situation, use the HIV-1 and human Hepatitis B Virus product standard the after-each-client rule sets for contaminated tubs.

Rinse.

Air dry.

Then replace the disinfected parts into the tubs, or store them in a disinfected, dry, covered container that is isolated from contaminants . Do not toss wet jets into an open drawer with used files. Do not bag them with soiled linens.

End-of-day jet work is in addition to after-each-client disinfection. Completing the client cycle does not excuse leaving screens in place overnight.

Realistic failures that show up as test stems

A technician drains a circulating spa, wipes the visible bowl, and refills for the next client without circulating EPA disinfectant — the pipes were never treated. Another scrubs everything except the water-line film, then wonders why the inspector fails the spa. Another uses an ultraviolet wand on a drained tub and calls it sterilization; ultraviolet lights are not an acceptable sterilization technique anywhere in these rules, and they are not a substitute for the spa protocol. Another has a nick that bled into the water and still uses the everyday three-claim product that does not claim HIV-1 and hepatitis B Virus — the blood exception was ignored. Another does a careful after-each-client cycle all afternoon and then leaves jets seated overnight because “the bowl was already disinfected.”

Portable basins and in-place whirlpools are both “industry modalities” under this heading. If water held a client’s feet, this protocol applies. If the unit has internal water movement, treat it as circulating. If it is a still bowl, treat it as non-circulating.

How to memorize the two clocks

Think of two clocks. Clock one runs after every pair of feet : drain, clean (water line), rinse, fill, choose the right EPA product, then stand or circulate for label time. Clock two runs when you close : pull filters, screens, drains, and jets; brush with soap; rinse; fully immerse in EPA solution; rinse; air-dry; put them back or into a covered, isolated, disinfected dry container. If you can recite those two clocks without mixing circulating with standing, you are ready for the State Law items on spas.

Keep goggles and nitrile gloves in the same mental picture. The chemical is for the empty, cleaned vessel and for removable parts — not for skin. A client should never sit in disinfectant water, and you should not skip gloves because the product “is only a soak additive.” The rule’s recommended PPE exists because these are EPA-registered disinfectants used at manufacturer strength for pathogen kill, not cosmetic foot soaks.

Loading diagram... After-each-client pedicure tub disinfection under ADH rules