Study guide
10.2 Nail Implements: Clippers, Pushers, Nippers, and Files
Arkansas Nail Technician Manicurist
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Arkansas Manicurist Exam Facts 1.2 Eligibility, Training Hours, and Student Registration 1.3 Written, State Law, and Practical Scheduling and Scoring
2 Arkansas License Identity and Scope of Practice
2.1 Who Licenses Arkansas Manicurists 2.2 Legal Definition and Scope of Manicuring 2.3 Where You May Practice, Display, and Address Changes
3 Infection Control Science
3.1 How Disease and Infection Are Caused and Transmitted 3.2 Levels of Infection Control 3.3 Infection-Control Process: Implements, Dispensing, Disposal, and Storage
4 Blood Exposure, Chemicals, and Workplace Safety
4.1 Blood Exposure Procedures 4.2 Safety Data Sheets, Adverse Reactions, and Chemical Storage 4.3 Ventilation, Harmful Ingredients, and Ergonomics
5 Arkansas Establishment Sanitation Rules
5.1 EPA Disinfectants, Wet Receptacles, and Implement Storage 5.2 Pedicure Tub and Spa Disinfection 5.3 Facility Requirements, Animals, Disease, and Posted Notices
6 Nail Anatomy, Growth, and Disorders
6.1 Parts and Functions of the Nail Unit 6.2 Nail Growth, Keratin, and Matrix Damage 6.3 Nail Disorders and Diseases: Signs, Symptoms, and Referral
7 Skin, Bones, and Muscles for Nail Services
7.1 Skin Structure of the Hands and Feet 7.2 Skin Disorders and Diseases of Hands and Feet 7.3 Bones, Muscles, and Joints of the Arms, Hands, Legs, and Feet
8 Chemistry of Nail Products
8.1 Purpose and Effects of Nail Product Ingredients 8.2 Physical Changes, Chemical Reactions, and Product Interactions 8.3 Harmful Ingredients, Overexposure, and Sensitization
9 Consultation, Contraindications, and Pre-Service
9.1 Client Consultation, Analysis, and Records 9.2 Conditions That Prohibit Service 9.3 Work-Area Setup and Pre-Service Sanitation
10 Nail Service Tools and Safe Use
10.1 Nail Equipment: Table, Lamp, Electric File, and Pedicure Basin 10.2 Nail Implements: Clippers, Pushers, Nippers, and Files 10.3 Supplies, Products, Labeling, and Safe Use
11 Manicure Procedures
11.1 Basic Water Manicure Sequence 11.2 Shaping, Cuticle Work, Buffing, and Polish 11.3 Massage Movements: Effleurage, Petrissage, Friction, and Tapotement
12 Pedicure, Add-On Services, and Post-Service
12.1 Basic Pedicure Sequence and Foot-File Safety 12.2 Paraffin, Exfoliation, and Thermal Add-On Services 12.3 Aftercare, Client Education, and Post-Service Disinfection
13 Nail Tips and Acrylics
13.1 Full-Well Nail Tip Application and Blending 13.2 Acrylic Liquid-and-Powder Application and Maintenance 13.3 Acrylic Removal and Natural-Nail Finish
14 Gels, Hybrid Systems, and Powder Dip
14.1 Soft, Hard, and Hybrid Gel Systems 14.2 Powder Dip Systems 14.3 Enhancement Troubleshooting
15 Practical Exam Performance
15.1 Arkansas Practical Format, Kit, and Labeling 15.2 Work Area Setup and New-Client Reset 15.3 Practical Manicure, Polish, and Full-Well Tip Tasks 15.4 Sculptured Nail, Removal, and Blood-Exposure Demonstration
16 Reciprocity, Renewal, Fees, and Enforcement
16.1 Reciprocity, Out-of-State Hours, and Military Paths 16.2 Renewal, Lapsed Licenses, and Lifetime Licenses 16.3 Fees, Inspections, Complaints, and Enforcement
10.2 Nail Implements: Clippers, Pushers, Nippers, and Files
Key Takeaways Explain This Topic AI
Implements are handheld tools: clippers shorten the free edge, metal pushers gently move softened eponychium, nippers trim hangnails or excess dead tissue, and files change shape by abrasion.
Metal multi-use implements are cleaned of debris first, then fully submerged in covered EPA bactericidal, virucidal, and fungicidal liquid for the label’s contact time, then stored in a clean covered container.
Nippers are for hangnails and dead tissue after softening—not for digging living eponychium, attached plate, or an inflamed fold.
Wooden or orangewood pushers are porous and typically single-use; they are not wet-jar tools.
File grit: a lower number is more aggressive. Arkansas requires porous files, pumice stones, and buffers to be discarded after use; so-called disinfectable versions of those items are prohibited.
Last updated: September 2026
Implements are the handheld tools Domain 5 names next
After equipment, NIC Domain 5 asks you to identify purpose and function of nail implements —the CIB’s examples are nail clippers and cuticle pusher . On an Arkansas manicurist station the same family includes nippers and files . Implements are what you hold. They are not the table, not the spa, and not the bottle of polish. Safe use is half anatomy (do not cut what is alive) and half infection control (metal that can be cleaned is cleaned, then disinfected; porous tools leave with the client in the trash).
ADH Cosmetology and Body Art Rules already wrote the process Chapter 5.1 scored: clean first , then EPA-registered bactericidal, virucidal, and fungicidal liquid, full submersion , receptacle covered , solution changed daily or when cloudy or dirty , then clean covered container storage for non-electrical items. This section names which implement you are holding and what it is allowed to do on a finger or toe.
Nail clippers: shorten keratin, not living folds
Nail clippers exist to shorten the free edge of a natural nail—or, with a larger jaw, a toenail—so you can then file the shape. Hand clippers and toenail clippers are different sizes because a hallux plate is thicker; using a tiny hand clipper on a thick toenail crushes rather than cuts, and using a huge toenail clipper on a thin fingernail can tear the plate. Purpose is a clean cut through dead keratin that is already past the free edge. Safe use means you can see the tissue, the plate is dry enough not to shred, and you are not clipping into the hyponychium or an attached corner.
Do not clip an infected , draining, or clearly painful fold “to relieve it.” That is a refuse-and-refer finding from Chapter 9, not a clipper skill. After the client, metal clippers are multi-use : pick debris out of the hinge (soil blocks disinfectant), wash/clean, open the jaws so solution reaches the joint, fully submerge in the covered EPA jar for label contact time , then store in a clean covered container . A towel wipe is not that sequence. An ultraviolet box is not that sequence.
Pushers: metal multi-use versus wooden single-use
A cuticle pusher (metal, often spatula on one end and a slightly pointed cleaner on the other) exists to gently move softened eponychium off the plate and to clear nonliving debris from the plate surface or under a free edge you can actually see. Softening comes first—warm water in a finger bowl or a labeled cuticle product—because dry shoving splits living tissue. The pusher is a plate tool , not a chisel. If you need force, you are in the wrong anatomy.
Metal pushers follow the non-electrical path: clean, EPA liquid, full submersion, covered storage. Hinged or grooved details still need soil removed first.
Wooden pushers (orangewood sticks) are porous . Their purpose is the same gentle push or a cotton-wrapped clean under a free edge, plus sometimes placing a small amount of product. In Arkansas, used porous supplies that cannot be disinfected—files, pumice, buffers, and this wood—are disposed of immediately after use . Do not park an orangewood stick in the wet jar with nippers. Do not sand the used tip and call it new. Treat wood as single-use unless a manufacturer has produced a truly non-porous tool, which ordinary orangewood is not.
Nippers: hangnails, not live-tissue sculpture
Cuticle nippers exist to trim a hangnail or a tag of already-dead tissue after softening—not to carve a raw “clean line” around the eponychium so product will “sit prettier.” Living eponychium is skin . Cutting it is how you get blood , paronychia , and a practical blood-exposure problem. Digging the blades under an attached plate or into a swollen fold is the same error with a different angle. If the fold is inflamed, refuse the cosmetic cut and refer; do not “open it a little.”
Safe use: blades meet only dead tissue you can see, the client is not jumping, and you stop at the first nick. Then the metal nippers are cleaned (open the hinge), EPA-submerged, and stored covered. Dull nippers crush instead of cut; crushed living tissue still bleeds. Repair or replace them. They are implements, not equipment, but ADH’s “functioning per manufacturer / repair or discard” idea still applies to a tool that no longer closes.
Files: grit number, aggression, and Arkansas porous rules
A nail file exists to change shape and length by abrasion —a physical change (Chapter 8), not a chemical one. Grit is how coarse the abrasive is. A lower grit number is more aggressive : fewer, larger particles remove more material faster. An 80- or 100-grit surface is a coarse cutter for enhancement product . A 180-grit range is a common natural-nail shaping zone. 240-grit and finer refine and finish. A buffer is a high-grit (or multi-grit) foam tool whose purpose is to smooth and shine ; over-buffing thins the plate until it burns and peels.
The exam trap is reversing grit: people say “higher number means stronger.” Higher number means finer particles and less bite. Using 80 grit on a thin natural plate is how you heat the bed with a hand file the same way an e-file does with a coarse band.
Arkansas is stricter than “wipe the file.” All used porous files, pumice stones , and buffers that cannot be disinfected go in a waste receptacle immediately after use . The next sentence in the rules is the one candidates skip: disinfectable files, pumice stones, and buffers are prohibited. Do not invent a hospital-grade file soak. A crystal file marketed as “washable” does not override that prohibition in an Arkansas establishment. If the item is a file, pumice, or buffer, it is not a multi-client wet-jar tool here.
On the NIC practical, used files and buffers go in trash , not “items to be disinfected,” unless you have a truly non-porous implement the CIB still expects you to keep visibly clean—and Arkansas shop law still will not let you treat ordinary boards as disinfectable. When in doubt on exam day, discard porous abrasives .
Implement Purpose Multi-use or single-use After the client
Nail / toenail clippers Shorten free-edge keratin Metal multi-use Clean hinge, EPA B/V/F full submersion, covered storage
Metal cuticle pusher Gently move softened eponychium; clear plate debris Metal multi-use Clean, EPA submerge, covered storage
Wooden / orangewood pusher Same gentle work; cotton wrap Porous, typically single-use Trash; not a wet-jar tool
Cuticle nippers Trim hangnail or excess dead tissue Metal multi-use Clean open hinge, EPA submerge, covered storage
Coarse file (low grit) Aggressive product reduction Porous in ordinary salon boards Trash in Arkansas; do not jar-soak
- Finer file / buffer Shape natural plate; smooth and shine Porous Trash after use; over-buffing thins the plate
- The metal path versus the trash path, without rewriting Chapter 5
Think in two lanes. Lane A — metal multi-use: clippers, metal pushers, nippers. Debris off, including joints. EPA B/V/F liquid, submerged, covered jar, label time. Store in a clean covered container , not on an open towel you borrowed from the electrical-storage sentence. Lane B — porous: wood, ordinary files, buffers, pumice, sand bands from Section 10.1. Trash immediately. Do not mix the lanes in the wet receptacle. Do not put a used file into the clean covered container “for the next fill.” Do not return a used nipper to the NIC kit (Section 10.3 / Chapter 15).
Scenario: the hangnail that became a blood exposure
A technician in Pine Bluff sees a hangnail, skips the soak, and uses nippers to “clean all the way around” until the eponychium is a raw rim. Product then sits on living skin, the client bleeds, and the station now needs the Chapter 4 blood-exposure order plus implement disinfection. Domain 5 would have been satisfied by softening, trimming only the dead tag, and leaving living tissue alone. Implements fail on purpose as often as they fail on the jar.