Study guide

9.1 Choosing an Application Method

Arkansas Pesticide Applicator Certification Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Arkansas Pesticide Laws, Regulations & Licensing Framework

1.1 Arkansas Statutory & Regulatory Framework 1.2 Arkansas Applicator Classifications & Licensing 1.3 Arkansas Pesticide Classification System (Classes A-J) & Dicamba Rules 1.4 FIFRA & Federal Regulatory Framework 1.5 Product Registration, RUP Dealers & Special Permits 1.6 Arkansas Herbicide Application Equipment Set-Up Rules

2 Chapter 2: Pesticide Safety, Human Toxicology & Emergency Response

2.1 Principles of Toxicology & Exposure Routes 2.2 Personal Protective Equipment (PPE) & Respiratory Protection 2.3 First Aid Protocols & Poisoning Emergency Response 2.4 Pesticide Storage, Secure Transport & Spill Management 2.5 Heat Stress, PPE Load & Work-Rest Management 2.6 Container Rinsing, Rinsate & Excess Pesticide Disposal 2.7 Cholinesterase Monitoring & Medical Supervision

3 Chapter 3: Worker Protection Standard (WPS) & Agricultural Safety

3.1 Worker Protection Standard (WPS) Core Requirements 3.2 Restricted-Entry Intervals (REI) & Decontamination Protocols 3.3 WPS Training, Information Display & Employer Records

4 Chapter 4: Pesticide Labeling, Hazard Communication & Compliance

4.1 Anatomy of a Pesticide Label & Legal Force 4.2 Signal Words, Toxicity Categories & Hazard Statements 4.3 Directions for Use & Mandatory vs. Advisory Statements 4.4 Reading a Label Under Pressure: Rates, PHI, Rotations & Supplemental Labelling

5 Chapter 5: Environmental Stewardship & Aquatic Ecosystem Protection

5.1 Spray Drift Physics & Mitigation 5.2 Protecting Groundwater, Surface Water & Arkansas Aquifers 5.3 Endangered Species & Pollinator Protection 5.4 Arkansas Agro-Ecosystems & Rice Paddy Protection 5.5 Pesticide Fate in Soil and Water: Solubility, Adsorption, Persistence & Volatility 5.6 Pre-Application Site Assessment & Sensitive Area Management

6 Chapter 6: Formulations, Application Equipment & Sprayer Calibration

6.1 Pesticide Formulations & Adjuvant Chemistry 6.2 Application Equipment Operation & Nozzle Engineering 6.3 Sprayer Calibration Formulas & Calculations 6.4 Tank Mixing, Loading Math & Active Ingredient Rates 6.5 Pesticide Math Foundations: Units, Areas, Percentages & Dilutions 6.6 Calibrating Granular, Band & Spot Applications 6.7 Sprayer Maintenance, Tank Cleanout & Storage

7 Chapter 7: Integrated Pest Management (IPM) & Resistance Management

7.1 Fundamentals of Integrated Pest Management 7.2 Economic Thresholds & Pest Population Dynamics 7.3 Pesticide Resistance Management & Mode of Action 7.4 Pest Recognition & the Major Pest Groups 7.5 The Six Pest Control Methods 7.6 Pesticide Types, Selectivity & How Products Move in the Target 7.7 Diagnosing Herbicide Injury & Off-Target Damage

8 Chapter 8: Commercial Applicator Operations, Recordkeeping & Field Protocols

8.1 Commercial Firm Operations & Supervision 8.2 Recordkeeping, School Applications & Incident Reporting 8.3 Supervising Noncertified Applicators Under 40 CFR Part 171 8.4 Professionalism, Chemical Security & Product Stewardship

9 Chapter 9: Application Methods, Tank Mixing & Specialized Applications

9.1 Choosing an Application Method 9.2 Tank Mix Compatibility & Mixing Order 9.3 Chemigation & Backflow Prevention 9.4 Fumigation Fundamentals & Soil Fumigant Requirements

9.1 Choosing an Application Method

Key Takeaways Explain This Topic AI

Application methods divide by where the product is placed - foliar, soil surface, soil incorporated, in-furrow, banded, directed, broadcast, spot, seed treatment, baiting, chemigation and fumigation.

Placement drives both efficacy and exposure: soil incorporation reduces volatilization and photodegradation, in-furrow and seed treatment place product only where the crop needs it, and broadcast foliar work carries the greatest drift exposure.

Aerial application covers acreage fast and avoids compaction and wet-field access problems, but it carries the highest drift risk and in Arkansas it triggers the numeric set-up rules in 2 CAR Sec. 72-102(a).

Low-volume applications concentrate the spray solution and demand smaller droplets for coverage, which directly increases drift risk - the coverage-versus-drift trade-off is the central tension in method selection.

The method must be one the label does not prohibit; FIFRA Section 2(ee) permits using a method not prohibited by the labelling, but never a site or a rate the label does not allow.

Last updated: September 2026

9.1 Choosing an Application Method

Core Concept: 40 C.F.R. Sec. 171.103(c)(7) makes application methods a competency area in its own right - selecting a method, preventing drift, and understanding fumigation and aerial application. The method is not a detail after product selection; it determines whether the product reaches the target, whether the crop is safe, how much the handler is exposed, and how much leaves the field.

Where the Product Goes

Method Placement Best for Main trade-off

Broadcast foliar Uniformly over the whole surface Post-emergence herbicides, foliar insecticides and fungicides Highest drift exposure; treats the whole area whether it needs it or not

Band A strip over or beside the row Residual herbicides in row crops Untreated middles need cultivation or a second pass

Directed / shielded Aimed at the base of the crop or between rows, away from foliage Products the crop would not tolerate overhead Slower; requires accurate guidance and crop staging

Spot treatment Individual plants or patches Scattered escapes, perennial patches, hand-gun work Operator-dependent output; calibrate per operator

Soil surface (preemergence) On the soil, unincorporated Residual herbicides activated by rain or irrigation Needs moisture; volatile or photodegradable products lose activity

Soil incorporated (PPI) Mixed mechanically into the soil Volatile or photodegradable products Requires tillage; incorporation depth and uniformity affect performance

In-furrow In the seed furrow at planting Insecticides, fungicides, nematicides, inoculants Placement precision; potential seedling phytotoxicity

Seed treatment On the seed itself Early-season insect and disease protection Handled at the seed level; a distinct Arkansas licence category

Baiting Attractant plus toxicant in a station or granule Rodents, ants, slugs, some insects Bait placement and station security; non-target risk if not enclosed

Granular Dry particles broadcast, banded or in-furrow Soil-applied products; low drift Requires moisture for activation; calibrate by catch-and-weigh

Chemigation Through the irrigation system Large acreages already under irrigation Requires backflow prevention and interlocks - Section 9.3

Fumigation As a gas into soil or an enclosed space Soilborne pests, stored commodities, structures Highest acute hazard class - Section 9.4

Aerial Fixed-wing or rotary aircraft Large acreage, wet fields, tall crops, time-critical work Highest drift risk; triggers the Arkansas aerial set-up rules

How Placement Changes Fate and Exposure

Section 5.5 established that fate depends on solubility, adsorption, persistence and volatility. Placement is the variable you control:

Incorporating a volatile product converts a vapor drift problem into a soil-activity problem, which is why highly volatile soil herbicides carry PPI directions.

Incorporating also protects photodegradable products from ultraviolet breakdown on the surface.

In-furrow and seed treatment place a small quantity exactly where the crop needs it, which minimizes both total load and off-target movement - the reason these methods have grown at the expense of broadcast soil insecticides.

Banding cuts total product per field acre in half or better while holding the in-band rate at the label rate.

Directed and shielded application lets an applicator use a chemistry the crop cannot tolerate overhead, and simultaneously reduces drift because the spray is released low and aimed downward.

Aerial Application

Aerial work solves problems ground equipment cannot: hundreds of acres in a morning, saturated Delta fields with no ground access, tall or closed-canopy crops, and time-critical insect or disease events.

It also carries the highest drift risk of any method, which is why Arkansas writes numeric aerial rules directly into 2 CAR Sec. 72-102(a) - airspeed 145 mph , release height 15 feet above the crop canopy, nozzles rearward and at least 10 inches below the trailing edge, boom-to-wingspan 0.7 fixed-wing and 0.8 rotary , wind shear angle 30 degrees , minimum 2 gallons per acre , drift reduction nozzles, and a medium or larger droplet classification under ASABE S572. Section 1.6 covers these in full, and a private applicator using aircraft to apply herbicides must meet the same criteria.

Aerial applicators also work under buffer distances that are larger than ground buffers - Class F requires a 4-mile aerial buffer against susceptible crops where the general provisions apply, versus 1 mile for ground.

The Coverage-Versus-Drift Trade-Off

This is the tension underneath every method decision.

Contact products need thorough coverage. Coverage improves with higher carrier volume and smaller droplets , because more, smaller droplets cover more surface per gallon.

Smaller droplets drift. Droplets below about 150 microns are highly driftable, and driftable fines are conventionally counted below 105 microns .

Systemic products tolerate coarser sprays , because the product redistributes inside the plant.

The resolution is not to pick one side but to change the variables that improve coverage without shrinking droplets:

Raise carrier volume rather than reducing droplet size.

Lower the boom and slow down - both reduce the time droplets spend airborne.

Use air-induction nozzles , which produce large droplets containing air bubbles that collapse and spread on impact, giving coarse-spray drift behaviour with better-than-coarse coverage.

Add a drift-reduction adjuvant where the label permits, understanding that it shifts the droplet spectrum rather than eliminating fines.

Spray when conditions are right - the Arkansas inversion indicator, wind within limits, and wind direction away from sensitive receptors.

Important

Exam Trap: Section 2(ee) and Application Method FIFRA Section 2(ee) permits employing any method of application not prohibited by the labelling . That is genuinely broad - if the label does not forbid aerial application, aerial application is not automatically off-label. What 2(ee) never permits is applying to a site not listed , above the labelled rate , or contrary to an express label prohibition. Read the Directions for Use for method language before assuming either way.