Study guide

The Sound Beam: Near/Far Field & Focusing

ARDMS SPI Sonography Principles & Instrumentation

Track your progress as you read

Finished sections get a check mark.

1 Introduction & the SPI Exam

What the SPI Is & Why Physics Matters The V24.1 Content Outline & How to Study It Math, Units & Decibels You Must Know

2 Properties of Ultrasound Waves

Sound as a Mechanical Longitudinal Wave Period, Frequency & Wavelength Propagation Speed & the Wavelength Equation Amplitude, Power & Intensity

3 Pulsed Ultrasound

Continuous vs Pulsed Wave; PRF & PRP Pulse Duration, Spatial Pulse Length & Duty Factor Bandwidth, Q-Factor & Damping

4 Interaction of Sound with Tissue

Attenuation: Absorption, Reflection & Scattering The Attenuation Coefficient & Half-Value Layer Acoustic Impedance & Reflection Refraction, Snell's Law & the Range Equation

5 Transducers & Sound Beams

Construction & the Piezoelectric Effect The Sound Beam: Near/Far Field & Focusing Array Transducers Transducer Selection, Frequency Trade-offs & Nonimaging Probes

6 Resolution

Axial Resolution Lateral & Elevational Resolution Temporal Resolution & Frame Rate

7 Pulse-Echo Instrumentation & the Imaging Chain

Beam Former, Pulser & Output Power The Receiver: Amplification & Time-Gain Compensation Dynamic Range & Compression Signal Processing: Demodulation, Rejection & Pre/Post-Processing Scan Converter, Display & Image Storage

8 Display Modes & Image-Optimization Features

A-Mode, B-Mode & M-Mode Harmonic Imaging Spatial & Frequency Compounding, Panoramic Imaging 3D/4D Imaging & Contrast Agents

9 Doppler Principles & Instrumentation

The Doppler Effect, Shift & Equation The Doppler Angle & Cosine Continuous-Wave Doppler Pulsed-Wave Doppler, Sample Volume & Nyquist Limit Aliasing & How to Eliminate It Spectral Doppler Analysis & Waveforms Color & Power Doppler Hemodynamics & Doppler Measurements

10 Artifacts

Propagation Artifacts Attenuation & Beam-Width Artifacts Doppler & Color Artifacts

11 Bioeffects, Safety & Quality Assurance

Bioeffects Mechanisms: Thermal & Cavitation Thermal & Mechanical Index & ALARA Quality Assurance & Tissue-Mimicking Phantoms Statistical Parameters: Sensitivity, Specificity & Predictive Value Patient Care, Ergonomics, Infection Control & Workflow

The Sound Beam: Near/Far Field & Focusing

Key Takeaways Explain This Topic AI

The ultrasound beam converges through the near zone (Fresnel zone) and diverges through the far zone (Fraunhofer zone).

Near-zone length equals D squared divided by four times wavelength, which equals radius squared divided by wavelength.

A larger element diameter and a higher operating frequency (shorter wavelength) both lengthen the near zone.

The natural beam waist, the point of best unfocused lateral resolution, sits at the end of the near zone.

Focusing, whether mechanical or electronic, narrows the beam at a selectable depth, but beyond the focal zone the beam diverges more rapidly than an unfocused beam would.

Last updated: July 2026

  • The Sound Beam: Near/Far Field & Focusing
  • The Beam Does Not Travel as a Uniform Column

Sound leaving the flat face of a transducer element does not travel outward as a column of constant width. Interference between the countless tiny wavelets launched from every point across the vibrating face divides the beam into two distinct geometric regions with fundamentally different behavior: the near zone and the far zone .

The Near Zone (Fresnel Zone)

In the near zone, also called the Fresnel zone , constructive and destructive interference among wavelets originating across the element face causes the beam to actually converge as it travels away from the transducer, becoming progressively narrower until it reaches its narrowest natural width at the boundary between the near zone and the far zone. Because a narrower beam produces better lateral resolution — two side-by-side reflectors are more easily distinguished as separate structures — the end of the near zone is the point of best natural lateral resolution for an unfocused beam.

The Far Zone (Fraunhofer Zone)

Beyond the near-zone boundary lies the far zone, or Fraunhofer zone . Here the beam behaves in the opposite way: it steadily diverges , spreading out like a widening cone as depth increases. Lateral resolution in the far zone worsens progressively with depth, because the beam itself becomes wider than the structures the sonographer is trying to resolve.

Near-Zone Length: The Formula

The exact point where the near zone ends and the far zone begins, the near-zone length (NZL) , sometimes called the Fresnel zone length, is calculated from the transducer element's size and the wavelength of the sound it produces:

Near-zone length = D²/(4λ) = r²/λ

where D is the element diameter, r is the element radius (r = D/2), and λ is the wavelength. Both forms of the equation describe the identical distance; substituting D = 2r into D²/(4λ) reduces algebraically to r²/λ.

Worked example. A single-element transducer with a 12 mm diameter operates at a wavelength of 0.3 mm:

NZL = D²/(4λ) = (12 mm)² / (4 × 0.3 mm) = 144 / 1.2 = 120 mm

Two design variables push the near-zone length longer (deeper): a larger element diameter and a higher operating frequency (shorter wavelength). A large-diameter, high-frequency element therefore has a long near zone with a very narrow natural beam waist at its end, useful for a well-collimated beam, but at the cost of a longer distance traveled before that narrowing occurs.

  • Variable increased Effect on near-zone length
  • Element diameter (D) Increases (near zone extends deeper)
  • Frequency (shorter λ) Increases (near zone extends deeper)
  • Wavelength (λ) directly Longer wavelength shortens the near zone
  • Focusing: Artificially Narrowing the Beam

The natural narrowing at the end of the near zone happens at only one fixed depth, determined purely by element size and frequency, not necessarily the depth of the structure the sonographer needs to see. Focusing overrides this by artificially narrowing the beam at a chosen, selectable depth, producing a beam waist narrower than the natural near-zone waist and placed exactly where the sonographer wants the best lateral resolution.

Focusing is achieved in two ways:

Mechanical focusing — a curved (concave) element or an acoustic lens bends the wavefront inward toward a fixed geometric focus, much like a magnifying lens bending light.

Electronic focusing — in array transducers, small, precisely calculated time delays are applied to the excitation of different elements across the active aperture so that their wavefronts arrive in phase at a chosen focal depth. Because these delays can be changed pulse to pulse, electronic focusing lets the operator select, and even combine, multiple focal zones at different depths.

Beyond the Focal Zone

Focusing narrows the beam only over a limited range surrounding the focal point. Beyond the focal zone, the beam diverges again, and it diverges more rapidly than an unfocused beam would, because a focused beam is deliberately built with a wider effective aperture that converges sharply and then spreads sharply past its narrowest point — a Fraunhofer-type divergence. This is why placing a single focal zone too shallow leaves deep structures poorly resolved, why multiple focal zones are often used to maintain resolution over a range of depths, and why adding more focal zones reduces frame rate, since each additional zone requires an additional full pulse-echo cycle, a trade-off explored further in the resolution and instrumentation chapters.

Why This Matters for Image Quality

Near/far-zone geometry and focusing together determine where in the image lateral resolution is best. A sonographer who understands that the natural beam waist sits at the near-zone length, and that focusing can relocate and sharpen that waist to the depth of clinical interest, can deliberately place focal zones to optimize resolution exactly where it is needed, rather than accepting whatever depth the transducer's unfocused geometry happens to favor.

  • The beam converges through the near (Fresnel) zone and diverges through the far (Fraunhofer) zone
  • Near-zone length = D²/(4λ) = r²/λ; larger diameter and higher frequency both lengthen the near zone
  • The natural beam waist (best unfocused lateral resolution) sits at the end of the near zone
  • Focusing (mechanical or electronic) artificially narrows the beam at a selectable depth
  • Beyond the focal zone, a focused beam diverges more rapidly than an unfocused beam would