Study guide

5.3 Accessible Parking, Van Spaces & Site Access Routes

ARE 5.0 Programming & Analysis PA

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Environmental Principles

1.1 ARE 5.0 PA Exam Structure, Scoring & Test-Taking Strategies 1.2 Climate Classification, Passive Solar Design & Microclimate Analysis 1.3 Natural Site Features, Shading Strategies & Daylight Analysis

2 Chapter 2: Environmental Constraints & Site Hazards

2.1 Floodplains, Wetlands & Hydrological Constraints 2.2 Contaminated Sites, Brownfields & Environmental Site Assessments (ESA) 2.3 Climate Resilience, Wildfire (WUI) & Sustainable Rating Systems (LEED)

3 Chapter 3: Building Codes: Occupancy & Construction Types

3.1 IBC 2021 Occupancy Classifications & Use Groups 3.2 Construction Types (Types I-V) & Fire-Resistance Ratings 3.3 Mixed Occupancy Strategies: Nonseparated, Separated & Accessory Uses

4 Chapter 4: Building Codes: Allowable Height, Area & Fire Protection

4.1 Building Height & Story Limitations (IBC Chapter 5) 4.2 Allowable Area Calculations & Frontage Increases (Equation 5-5) 4.3 Fire Walls, Fire Barriers, Fire Partitions & Smoke Barriers

5 Chapter 5: Accessibility Standards & Universal Design

5.1 Accessible Routes, Clear Floor Space, Turning Radius & Ramps (ADA / ICC A117.1) 5.2 Accessible Restrooms, Plumbing Fixtures & Signage 5.3 Accessible Parking, Van Spaces & Site Access Routes

6 Chapter 6: Means of Egress & Life Safety

6.1 Occupant Load Determinations (IBC Table 1004.5) 6.2 Egress Capacity, Exit Width & Stairway Design 6.3 Number of Exits, Travel Distances & Common Path of Travel

7 Chapter 7: Zoning Ordinances, Land Use & Entitlements

7.1 Zoning Classifications, Setbacks, Building Envelopes & Height Limits 7.2 Floor Area Ratio (FAR), Lot Coverage & Open Space Requirements 7.3 Parking Regulations, Loading Berths, Variances & Entitlement Approvals

8 Chapter 8: Topography, Geotechnical & Site Drainage

8.1 Contour Lines, Slope Calculations & Cut-and-Fill Grading 8.2 Soils, Geotechnical Reports, Bearing Capacity & Foundation Selection 8.3 Surface Hydrology, Runoff Calculations (Rational Method) & Stormwater / LID

9 Chapter 9: Site Documentation, Surveys & Contextual Analysis

9.1 Property Surveys, Legal Descriptions, Easements & Rights-of-Way 9.2 Historic Preservation, SHPO Reviews & Secretary of the Interior Standards 9.3 Vehicular & Pedestrian Circulation, Sight Triangles & Utility Infrastructure

10 Chapter 10: Building Programming Methodology & User Needs

10.1 Problem Seeking Methodology: 5 Steps & 4 Considerations 10.2 Determining Client & User Needs: Fact Gathering, Interviews & OPR 10.3 Functional Adjacencies, Bubble Diagrams & Matrix Analysis

11 Chapter 11: Space Standards, Area Calculations & Efficiency

11.1 Net Square Footage (NSF) vs. Gross Square Footage (GSF) & Efficiency Ratios 11.2 BOMA Floor Measurement Standards: Usable vs. Rentable Area & Load Factors 11.3 Space Allocation Standards, Unassigned Space & Grossing Factors

12 Chapter 12: Existing Facilities, Project Budget, Schedule & System Alternatives

12.1 Existing Building Evaluations, Adaptive Reuse & Hazardous Materials 12.2 Project Budgeting, Hard vs. Soft Costs & Cost Estimating Methods 12.3 Life-Cycle Cost Analysis (LCCA), Critical Path Scheduling & Phasing 12.4 Building, Structural & MEP System Alternatives for Programmatic Requirements

5.3 Accessible Parking, Van Spaces & Site Access Routes

Key Takeaways Explain This Topic AI

At least 60% of all public building entrances must be accessible, connected by an accessible exterior route (maximum 1:20 running slope, 1:48 cross slope) to site arrival points including parking, sidewalks, and transit stops.

Accessible parking is scoped per ADA Table 208.2 (e.g., 1 space for 1–25 stalls, 4 for 76–100, 7 for 201–300, 9 for 401–500, and 2% for 501–1,000 stalls), with outpatient physical therapy facilities requiring 20% and hospital outpatients 10%.

At least 1 in every 6 accessible spaces (or fraction thereof) must be van accessible (minimum 1 van space), configured either as 132 inches wide with a 60-inch aisle or 96 inches wide with a 96-inch aisle, with 98 inches vertical clearance.

Maximum slope in accessible parking stalls and access aisles is 1:48 (2.08%) in all directions to prevent wheeled mobility devices from rolling away or tipping during transfers.

Curb ramps require a maximum running slope of 1:12 (8.33%), maximum cross slope of 1:48, flared sides of 1:10 maximum where pedestrians cross flares, and built-in detectable warnings (truncated domes) at vehicular roadway boundaries.

Last updated: September 2026

5.3 Accessible Parking, Van Spaces & Site Access Routes

Note

The Accessible Site Arrival Chain : Accessibility does not begin at the threshold of an exterior doorway; it begins at the boundary of the property. Under 2010 ADA Section 206 and ICC A117.1 Chapter 4 , an architect must design a continuous, seamless accessible chain of circulation connecting all site arrival points—public sidewalks, municipal transit stops, accessible parking stalls, and passenger loading zones—directly to accessible building entrances. On the ARE 5.0 Programming & Analysis division, site planning items frequently combine civil grading, parking stall arithmetic, and curb ramp geometry into comprehensive site analysis scenarios.

  • Exterior Accessible Routes & Site Arrival Points
  • Scoping & Connectivity Mandates

At least one accessible route must be provided within the boundary of the site connecting:

Public transportation stops and accessible passenger loading zones located on the property.

Public streets and municipal pedestrian sidewalks adjoining the property line.

Accessible parking spaces, accessible storage facilities, and outdoor recreation areas.

At least 60% of all public entrances to each building or facility on the site.

All direct vehicular parking connections, including enclosed parking garages, pedestrian tunnels, and elevated skybridges. +--------------------------------------------------------------------------------+

  • | The Continuous Site Access Chain |
  • +--------------------------------------------------------------------------------+
  • | Public Sidewalk / Bus Stop ──> Accessible Exterior Route (Slope ≤ 1:20) |
  • | │ |
  • | Accessible Parking / Van Space ──────────┼──> Curb Ramp (Slope ≤ 1:12) |
  • | │ |
  • | Passenger Drop-Off Zone (Aisle 60"x20') ─┘ |
  • | │ |
  • | ▼ |
  • | Accessible Building Entrance |
  • | (≥ 60% of Public Entrances) |
  • +--------------------------------------------------------------------------------+
  • Exterior Route Slopes & Surface Standards

Running Slope : An exterior accessible route is considered a standard walking path if its running slope is not steeper than 1:20 (5.00%) . Any route steeper than 1:20 must be engineered and detailed as an accessible ramp complying with Section 405 (maximum 1:12 slope, handrails, level landings, and edge protection).

Cross Slope : The cross slope of an exterior accessible route cannot exceed 1:48 (2.08%) .

Surface Materials : Exterior walking surfaces must be firm, stable, and slip-resistant . Loose gravel, uncompacted mulch, uneven cobblestones, and heavily textured flagstone do not comply.

Surface Openings (Grates) : Openings in walking surfaces (such as drainage grates or tree well covers) cannot allow passage of a sphere larger than 1/2 inch (13 mm) in diameter. If grates have elongated openings, they must be oriented with the long dimension perpendicular to the dominant direction of pedestrian travel to prevent crutch tips and narrow wheelchair casters from becoming trapped.

Accessible Parking Scoping: ADA Table 208.2 & Medical Exceptions

The total number of required accessible parking stalls is calculated independently for each distinct parking facility (parking lot or parking structure) on a site, based on the total parking capacity of that individual facility.

  • Total Parking Spaces in Facility Minimum Required Accessible Spaces Minimum Van Accessible Spaces Required
  • 1 to 25 1 1 (Must be van accessible)
  • 26 to 50 2 1
  • 51 to 75 3 1
  • 76 to 100 4 1
  • 101 to 150 5 1
  • 151 to 200 6 1
  • 201 to 300 7 2 (1 in every 6 or fraction thereof)
  • 301 to 400 8 2
  • 401 to 500 9 2
  • 501 to 1000 2% of total parking capacity 1 in every 6 accessible spaces
  • 1001 and over 20, plus 1 for each 100 over 1000 1 in every 6 accessible spaces
  • Medical Facility Scoping Exceptions

Standard commercial office buildings, retail centers, and residential developments follow Table 208.2. However, healthcare facilities trigger substantially higher scoping under ADA Section 208.2.1 and 208.2.2:

Hospital Outpatient Facilities : At least 10% of patient and visitor parking spaces must be accessible.

Rehabilitation & Physical Therapy Facilities : Facilities specializing in the treatment or mobility rehabilitation of outpatients (orthopedic clinics, physical therapy centers, spinal cord rehabilitation) require at least 20% of patient and visitor parking spaces to be accessible.

The Van Accessible Scoping Ratio

Under ADA Section 208.2.4, for every six accessible parking spaces (or fraction of six) , at least one must be a van accessible space .

If a parking lot contains 1 to 25 total stalls, it requires exactly 1 accessible stall, and that single stall MUST be van accessible .

A lot requiring 7 accessible spaces requires ⌈ 7 / 6 ⌉ = 2 \lceil 7 / 6 \rceil = 2 ⌈ 7/6 ⌉ = 2 van accessible spaces.

Stall & Access Aisle Dimensions: Car vs. Van Configurations

An accessible parking space consists of two integrated components: the vehicular stall and the adjacent pedestrian access aisle . Standard Car Space (8' Stall + 5' Aisle):

  • |<─── 96" (8 ft) ───>| |<─── 60" (5 ft) ───>|
  • =============================================
  • | | |
  • | CAR ACCESSIBLE | ACCESS AISLE |
  • | STALL | (Hatched lines) |
  • | | |
  • =============================================

Van Accessible Option 1 (11' Stall + 5' Aisle):

  • |<─── 132" (11 ft) ───>| |<─── 60" (5 ft) ───>|
  • ===============================================
  • | | |
  • | VAN ACCESSIBLE | ACCESS AISLE |
  • | STALL (WIDE STALL) | (Hatched lines) |
  • | | |
  • ===============================================

Van Accessible Option 2 (8' Stall + 8' Aisle):

  • |<─── 96" (8 ft) ───>| |<─── 96" (8 ft) ───>|
  • =============================================
  • | | |
  • | VAN ACCESSIBLE | VAN ACCESS AISLE |
  • | STALL | (WIDE AISLE) |
  • | | |
  • =============================================
  • 1. Standard Car Accessible Space

Stall Width : Minimum 96 inches (8 feet / 2440 mm) .

Access Aisle Width : Minimum 60 inches (5 feet / 1525 mm) .

Aisle Alignment : The access aisle must extend the full length of the parking stall it serves.

2. Van Accessible Space: Two Compliant Options

The 2010 ADA Standards provide architects with two interchangeable geometric configurations for van accessible stalls:

Option 1 (Wide Stall / Standard Aisle) : The parking stall is 132 inches (11 feet / 3350 mm) wide , served by an access aisle that is 60 inches (5 feet / 1525 mm) wide .

Option 2 (Standard Stall / Wide Aisle) : The parking stall is 96 inches (8 feet / 2440 mm) wide , served by an access aisle that is 96 inches (8 feet / 2440 mm) wide .

Tip

The Shared Access Aisle Advantage : Two accessible parking stalls (either two car spaces, or one car space and one van space) are permitted to share a single, common access aisle located between them. In an Option 2 configuration (8-foot stall + 8-foot aisle + 8-foot stall), the central 8-foot aisle satisfies the van aisle requirement while allowing a standard car stall on the opposite side to share the aisle, saving significant parking lot square footage.

Loading diagram... Two Accessible Spaces Sharing a Common Central Access Aisle

Vertical Clearance, Surface Slopes & Signage

Vertical Clearance : Van accessible parking stalls, their adjacent access aisles, and the entire vehicular drive path leading from the site entrance to the stalls and back out must maintain a minimum clear vertical headroom of 98 inches (8 feet 2 inches / 2490 mm) . In parking garages, structural beams, mechanical ducts, sprinkler pipes, and suspended signs must not hang below this 98-inch plane.

Maximum Slope in Stalls and Aisles : Both the parking stall and its access aisle must be substantially level, with a maximum allowable slope of 1:48 (2.08%) in all directions (both running slope and cross slope). Steep pavement slopes can cause wheelchairs to roll away during transfer or cause side-mounted wheelchair vehicle lifts to tilt dangerously.

Identification Signage : Accessible parking spaces must be identified by a sign displaying the International Symbol of Accessibility (ISA) . Signs must be mounted at a minimum height of 60 inches (1525 mm) AFF, measured from the ground surface to the bottom of the sign, ensuring visibility over parked sport utility vehicles and light trucks. Van spaces must carry an additional plaque stating "Van Accessible" .

Passenger Loading Zones

Passenger drop-off zones (such as porte-cochères at hotels and clinics) require an access aisle at least 60 inches (1525 mm) wide by 20 feet (6.0 m) long , running adjacent and parallel to the vehicle pull-up space, with a maximum slope of 1:48 and a minimum vertical clearance of 114 inches (9 feet 6 inches / 2895 mm) .

Curb Ramps: Types, Slopes, Landings & Flare Geometry

Curb ramps provide the crucial transition between elevated pedestrian sidewalks and vehicular street pavements or parking access aisles. Curb Ramp with Flared Sides (Perpendicular Type):

  • Sidewalk Surface (Top Landing: 36" min clear length)
  • ────────────────────────────────────────────────────
  • \ Ramp Flight /
  • \ Running Slope ≤ 1:12 /
  • Flared Side \ Clear Width ≥ 36" / Flared Side
  • Slope ≤ 1:10 \ / Slope ≤ 1:10
  • ─────────────────===========================================─────────────────
  • Pavement / Gutter Line
  • [Detectable Warnings]
  • 1. Geometric Minimums for Curb Ramps

Maximum Running Slope : The running slope of a curb ramp cannot exceed 1:12 (8.33%) .

Maximum Cross Slope : The cross slope of the ramp surface cannot exceed 1:48 (2.08%) .

Minimum Clear Width : The clear width of a curb ramp run, exclusive of flared sides, must be at least 36 inches (915 mm) .

Top Landing Requirement : A level landing must be provided at the top of a perpendicular curb ramp. The landing must be at least as wide as the ramp and have a clear length of at least 36 inches (915 mm) (though 48 inches is required if the landing adjoins an accessible route turn).

2. Flared Sides vs. Returned Curbs

Flared Sides (Pedestrian Path Crossing) : Where pedestrians walk across the side of a curb ramp from the adjacent sidewalk, the sides must be flared with a slope not steeper than 1:10 (10.0%) . If the top landing has a depth of less than 36 inches, the flare slope must be flattened to not steeper than 1:12 (8.33%) .

Returned Curbs (Protected Edges) : Where pedestrians cannot walk across the sides of the curb ramp (e.g., where the ramp edges are protected by continuous landscaping, handrails, or retaining walls), perpendicular returned curbs are permitted in lieu of flares.

3. Built-in Detectable Warnings (Truncated Domes)

Under ADA Section 705, detectable warnings are standardized surface textures consisting of raised truncated domes engineered to alert visually impaired pedestrians that they are entering a hazardous vehicular roadway.

Dome Geometry : Domes must have a base diameter of 0.9 to 1.4 inches (23 to 36 mm) , a top diameter of 50% to 65% of the base diameter, and a height of 0.2 inches (5.1 mm) .

Spacing : Center-to-center spacing of domes must be between 1.6 and 2.4 inches (41 to 61 mm) .

Coverage : Detectable warning surfaces must extend 24 inches (610 mm) in the direction of travel, spanning the full width of the curb ramp or boarding platform edge.

Contrast : The surface must provide a high visual contrast (light-on-dark or dark-on-light, commonly federal safety yellow or deep charcoal) with the surrounding pavement.

Loading diagram... Curb Ramp Design & Flare Slope Logic