Study guide

Quality Assurance vs. Quality Control

ARE 5.0 Project Management PjM

Track your progress as you read

Finished sections get a check mark.

1 Exam Orientation

About the ARE 5.0 Project Management Exam Study Strategies & Case Study Mastery

2 Resources and Team Capacity

Staffing Plans & Project Team Assembly Financial Multipliers & Billing Rates Staff Utilization & Chargeable Ratios Consultant Selection & Fee Budgeting

3 Work Plans and Schedules

Project Work Plan Fundamentals Critical Path Method (CPM) & Network Logic Gantt Charts & Milestone Tracking Schedule Contingencies & External Constraints

4 Fee Planning and Communication

Fee Allocation Across Project Phases Earned Value Management (EVM) for Architects Project Communications & Documentation Protocols

5 Owner–Architect Services

AIA B101 Structure & Initial Information Standard of Care, Indemnification & Liability Architect's Basic Services (Article 3) Supplemental vs. Additional Services (Article 4)

6 Consultant Agreements and Integration

AIA C401 Architect-Consultant Agreement Integrating Owner-Retained Consultants

7 Construction Agreements

A101: Price, Time, and Payment Terms AIA A201 General Conditions for Project Managers Construction Manager Contracts: CMa vs. CMc

8 Compensation, Disputes, and Termination

Dispute Resolution Mechanisms & Claims Architectural Compensation & Reimbursables Termination, Suspension & Instruments of Service

9 Delivery Structures and Document Controls

Comparative Project Delivery Methods Bridged Design-Build & Public-Private Partnerships Document Controls by Delivery Method

10 Collaborative Delivery and Procurement

Integrated Project Delivery & Lean Construction Procurement, Bidding & Negotiation

11 Budget Monitoring and Scope Changes

Cost Estimating & Designing to Budget Managing Scope Creep & Construction Changes

12 Construction Administration and Approvals

Submittals, RFIs, Payments & Project Closeout Agency Approvals and Permit Workflow

13 Quality Reviews and Compliance

Quality Assurance vs. Quality Control Peer Reviews & Code Compliance Tracking

14 Coordinated Documents and Models

Interdisciplinary Coordination & Redicheck Specifications & CSI MasterFormat Organization BIM Management & Level of Development (LOD) Clash Detection & Model Coordination

15 Risk, Design Objectives, and Learning

Project Risk Identification & Risk Register Maintaining Design Objectives Through Delivery Knowledge Management & Post-Occupancy Evaluation

Quality Assurance vs. Quality Control

Key Takeaways Explain This Topic AI

QA addresses reliable processes; QC evaluates actual deliverables.

Prevention, appraisal, internal failure, and external failure describe different quality costs.

Early detection can avoid rework, but a 1:10:100 ratio is a heuristic, not a guarantee.

Project-specific reviews can be direct project effort.

Last updated: October 2026

Quality Assurance vs. Quality Control

Note

Quick Overview: On the ARE 5.0 Project Management exam, quality management is evaluated as both a risk mitigation strategy and a financial governance discipline. Candidates must clearly distinguish between Quality Assurance (QA) —which is proactive, process-driven, and aimed at preventing defects through standard operating procedures, training, and project work plans—and Quality Control (QC) —which is reactive, product-driven, and focused on detecting errors through drawing reviews, redlining, and back-checking. Applying the Cost of Quality (CoQ) framework demonstrates that capital invested early in prevention yields exponential savings compared to the crippling costs of internal rework and external contractor claims.

Delivering high-quality architectural services requires far more than casual drawing reviews before a deadline. A professional architectural practice must establish systematic procedures that govern how work is planned, executed, evaluated, and improved. When quality procedures break down, the consequences extend beyond bruised pride: firms suffer severe fee erosion, delayed project schedules, compromised client relationships, and catastrophic professional liability claims under standard Owner-Architect agreements.

The Core Distinction: Quality Assurance (QA) vs. Quality Control (QC)

A fundamental concept tested on the PjM examination is the operational and philosophical difference between Quality Assurance and Quality Control. While practitioners often utter "QA/QC" as a single combined acronym, they represent two distinct operational phases of a complete quality management system. ┌────────────────────────────────────────────────────────────────────────┐

  • │ QUALITY MANAGEMENT SYSTEM (QMS) │
  • ├────────────────────────────────────┬───────────────────────────────────┤
  • │ QUALITY ASSURANCE (QA) │ QUALITY CONTROL (QC) │
  • ├────────────────────────────────────┼───────────────────────────────────┤
  • │ • Process-Oriented │ • Product-Oriented │
  • │ • Proactive & Preventive │ • Reactive & Detective │
  • │ • Executed BEFORE & DURING Work │ • Executed AFTER Document Drafts │
  • │ • Focus: How work is performed │ • Focus: The specific deliverable │
  • │ • Examples: SOPs, BIM templates, │ • Examples: Redline reviews, │
  • │ training, standard details, PWPs │ drawing audits, punch lists │
  • └────────────────────────────────────┴───────────────────────────────────┘
  • 1. Quality Assurance (QA): Process-Driven Prevention

Quality Assurance encompasses all planned, systematic actions instituted within an architectural firm to provide adequate confidence that a project's design and documentation will satisfy established professional standards of care and contractual requirements.

Proactive Focus: QA addresses the processes of production. Its goal is to make errors impossible—or at least highly improbable—by building quality into every step of the workflow.

Key QA Activities in Architecture:

Standard Operating Procedures (SOPs): Written guidelines detailing how project files are named, organized, structured, and archived.

Firm-Wide CAD and BIM Standards: Pre-configured project templates containing vetted layer standards, graphic line weights, view templates, text styles, and standard sheet layouts that prevent drafting inconsistencies.

Standard Detail Library: A centralized repository of constructible, thermally sound, watertight, and code-compliant construction details maintained and updated by experienced technical directors.

Staff Onboarding & Continuing Education: Structured training programs that mentor emerging professionals on building codes, detailing principles, and technical coordination before they draft project documents.

Project Work Planning (PWP): Developing comprehensive project work plans during the contract negotiation phase that establish milestone schedules, labor budgets, deliverable checklists, and assigned responsibilities.

Project Kickoff Meetings: Interdisciplinary orientation sessions where project parameters, client expectations, code constraints, and consultant scopes are aligned before design begins.

2. Quality Control (QC): Product-Driven Detection

Quality Control encompasses the specific operational techniques and activities applied to inspect, evaluate, and verify that actual project deliverables meet established quality criteria.

Reactive Focus: QC inspects the end products (drawings, specifications, digital models, reports) to identify and correct defects before documents are transmitted to clients, authorities having jurisdiction (AHJs), bidding contractors, or construction teams.

Key QC Activities in Architecture:

Document Checking and Redlining: Systematic line-by-line and note-by-note markups of physical check prints or digital drawing sheets using standardized markup protocols.

Back-Checking: The rigorous verification step where a checker confirms that every redline correction has been accurately drafted into the digital model without introducing secondary errors.

Interdisciplinary Coordination Reviews: Overlaying architectural drawings against structural, mechanical, electrical, and plumbing engineering sheets to identify geometric clashes and scope gaps.

Specification Audits: Cross-checking technical specifications against drawings to ensure specified products match scheduled items, avoiding conflicting performance requirements.

Constructability Reviews: Critical evaluations conducted by senior technical architects or field superintendents to determine whether details can be physically built in the field using conventional trade sequencing and available construction tolerances.

Submittal and Shop Drawing Reviews: Verifying contractor-submitted product data, shop drawings, and samples against contract documents during construction administration.

Field Observation and Punch Lists: Conducting on-site visits under AIA Document A201–2017 Section 4.2 to determine whether construction generally conforms to the contract documents, culminating in pre-completion punch list inspections.

The Cost of Quality (CoQ) Framework

In project management theory, the Cost of Quality (CoQ) provides an objective financial model for evaluating quality investments. CoQ represents the total expenditure incurred to prevent defects, appraise product conformance, and absorb the consequences of errors. CoQ is divided into two broad categories: Cost of Conformance and Cost of Non-Conformance . Cost of Quality = Prevention + Appraisal ⏟ Cost of Conformance + Internal Failure + External Failure ⏟ Cost of Non-Conformance \text{Cost of Quality} = \underbrace{\text{Prevention} + \text{Appraisal}}_{\text{Cost of Conformance}} + \underbrace{\text{Internal Failure} + \text{External Failure}}_{\text{Cost of Non-Conformance}} Cost of Quality = Cost of Conformance Prevention + Appraisal ​ ​ + Cost of Non-Conformance Internal Failure + External Failure ​ ​ COST OF QUALITY (CoQ)

  • │
  • ┌─────────────────────────┴─────────────────────────┐
  • ▼ ▼
  • COST OF CONFORMANCE COST OF NON-CONFORMANCE
  • (Discretionary Investment) (Incurred Loss & Penalty)
  • ┌───────┴───────┐ ┌───────┴───────┐
  • ▼ ▼ ▼ ▼
  • Prevention Appraisal Internal External
  • Costs Costs Failure Failure
  • Training • Peer Reviews • Redrafting • Change Orders
  • Standards • Redlines • Scrap models • Delay Claims
  • Templates • Checklists • Overtime • Litigation
  • SOPs • Spec Audits • Rework • Deductibles
  • 1. Prevention Costs (Cost of Conformance)

Money and labor hours proactively invested to prevent design and documentation defects from occurring in the first place.

  • Writing and updating firm-wide design manuals and BIM execution plans;
  • Developing, testing, and curating the firm's standard details library;
  • Conducting regular technical training seminars and code workshops for staff;
  • Implementing structured project onboarding and project kickoff protocols;

Purchasing advanced coordination software and clash-detection tools.

2. Appraisal Costs (Cost of Conformance)

Expenditures dedicated to inspecting, auditing, and evaluating deliverables to ensure complete conformance with standards before documents are released.

  • Budgeted non-billable or project-allocated hours for senior peer reviewers;
  • Conducting formal milestone Redicheck overlay reviews at 50% and 90% CD;
  • Performing third-party code, envelope, and accessibility audits;
  • Printing check sets, full-size drawing sheets, and specification review sets;

Conducting back-check sessions to verify redline pickup.

3. Internal Failure Costs (Cost of Non-Conformance)

Costs incurred when defects, coordination clashes, or code violations are discovered within the office before documents are issued for bidding, permitting, or construction.

Discarding uncoordinated structural or MEP model components and redrafting them;

Burning unbilled architectural labor hours and uncompensated staff overtime to fix errors discovered right before a deadline;

Redesigning building assemblies that fail initial code checks or energy compliance runs;

Schedule slippage causing firm resources to be trapped on a stalled project phase, delaying staffing on new incoming commissions.

4. External Failure Costs (Cost of Non-Conformance)

Catastrophic costs incurred when defective, ambiguous, or uncoordinated documents are issued to third parties—contractors, clients, and building officials—and are discovered during bidding or construction.

  • Contractor change orders resulting from design omissions, drawing conflicts, or missing dimensions;
  • Extended general conditions and contractor delay claims under AIA Document A201–2017 Section 8.3;

Uncompensated architectural labor required to research, respond to, and process hundreds of field Requests for Information (RFIs);

  • Redrafting documents to address Authority Having Jurisdiction (AHJ) plan check rejection notices;
  • Direct cash payouts for professional liability insurance deductibles (often $25,000 to $100,000+ per claim);
  • Legal defense fees, expert witness retainers, mediation/arbitration costs, and court judgments;

Irreparable damage to firm professional reputation, loss of repeat client business, and forfeiture of design awards.

Early detection and project cost

Correcting an issue before issue can avoid field demolition, material replacement, and delay. The frequently cited 1:10:100 comparison is a heuristic, not a measured ratio or guarantee for architectural projects. Evaluate the actual review cost and potential consequence. For example, an assumed six-hour review at $120/hour costs $720; if it identifies a conflict that would require $8,000 of field rework, early resolution avoids that particular potential expense. This scenario does not establish an industrywide multiplier.

Total Quality Management (TQM) and the Deming PDCA Cycle

Total Quality Management (TQM) is a comprehensive management approach that originated in manufacturing and has been adapted to professional service firms. TQM asserts that quality is not an isolated task assigned to a designated quality inspector; rather, it is a firm-wide cultural commitment involving every employee from intern to managing principal.

Central to TQM is the Plan-Do-Check-Act (PDCA) Cycle (also known as the Deming Cycle or Shewhart Cycle), which drives continuous quality improvement: ┌────────────────────────────────────────────────────────┐

  • │ THE DEMING PDCA CYCLE IN ARCHITECTURE │
  • └───────────────────────────┬────────────────────────────┘
  • │
  • ┌──────────────────────────┴──────────────────────────┐
  • ▼ ▼
  • ┌───────────┐ ┌───────────┐
  • │ 1. PLAN │ │ 2. DO │
  • ├───────────┴─────────────────────────┐ ├───────────┴─────────────────────────┐
  • │ • Define project scope & goals │ │ • Execute design & production │
  • │ • Establish Project Work Plan (PWP) │ ──────────> │ • Adhere to CAD/BIM standards │
  • │ • Select vetted standard details │ │ • Follow project deliverable lists │
  • │ • Identify applicable codes │ │ • Implement planned QA protocols │
  • └─────────────────────────────────────┘ └─────────────────────────────────────┘
  • ▲ │
  • │ │
  • │ ▼
  • ┌─────────────────┴───────────────────┐ ┌─────────────────────────────────────┐
  • │ 4. ACT │ │ 3. CHECK │
  • ├─────────────────────────────────────┤ <────────── ├─────────────────────────────────────┤
  • │ • Update standard details library │ │ • Conduct milestone peer reviews │
  • │ • Revise firm SOPs & templates │ │ • Perform Redicheck overlay audits │
  • │ • Hold project post-mortem meetings │ │ • Run clash detection & code checks │
  • │ • Document "lessons learned" │ │ • Track RFI & change order patterns │
  • └─────────────────────────────────────┘ └─────────────────────────────────────┘

Plan: Establish quality goals, identify client requirements, prepare the Project Work Plan, select appropriate standard details, and define milestone review dates.

Do: Execute the architectural design, draft construction documents, and coordinate systems in strict accordance with established firm standards and templates.

Check: Evaluate deliverables against project criteria through milestone peer reviews, redline audits, interdisciplinary clash detection, and code compliance checks. Track trends in review findings.

Act: Take corrective action on identified discrepancies, analyze root causes of recurring errors, update firm standard details, refine master specifications, and conduct post-occupancy "lessons learned" debriefings to reduce the chance of repeated mistakes on future commissions.

Developing and Implementing a Quality Management Plan (QMP)

An architecture firm's Quality Management Plan (QMP) is the formal operational document that codifies the firm's quality philosophy, policies, and procedures. On the ARE 5.0 PjM exam, questions often test how an effective QMP is constructed and maintained:

1. Document Management and Digital Layer Standards

The QMP establishes strict digital file naming protocols, folder directory structures, and sheet composition rules. In BIM environments, it defines the BIM Execution Plan (BEP) , establishing Levels of Development (LOD), model coordination schedules, origin reference points, and file exchange formats with engineering consultants.

2. Standard Detail Library Protocol (The "Template Trap")

A firm's standard details represent valuable intellectual property, but improper use introduces severe liability:

The Template Trap: Junior staff frequently copy details from past project folders into new projects without understanding underlying site conditions. An exterior wall detail designed for an interior-drainage parapet in a mild climate will catastrophically fail if copy-pasted into a cold-climate project with heavy snow loads.

The Vetting Rule: Standard details must be maintained in a locked, read-only central library supervised by a technical director. Each detail must carry metadata indicating design assumptions, code edition, climatic limitations, and compatible adjacent assemblies. Project teams may copy standard details into their project sets but must actively customize and verify them for project-specific conditions.

3. Clear Assignment of Quality Roles

An effective QMP delineates distinct responsibilities across the project hierarchy:

Principal-in-Charge: Establishes the quality policy, allocates required project-appropriate hours for appraisal activities, and ensures firm resources support quality objectives.

Project Manager (PM): Develops the Project Work Plan, schedules milestone quality reviews, monitors labor hours against quality budgets, and ensures consultant coordination.

Project Architect (PA): Directs day-to-day document production, enforces CAD/BIM standards, conducts ongoing coordination checks, and supervises redline pickups.

Designated QA/QC Reviewer: An independent senior technical architect who is not part of the daily project team, charged with conducting objective, milestone peer reviews at major gateways.